[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-74-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #109-Ubuntu SMP Tue Dec 9 16:47:54 UTC 2014 (Ubuntu 3.2.0-74.109-generic 3.2.64) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] Legacy DMI 2.3 present. [ 0.000000] DMI: Intel /SE7501BR2 , BIOS SBR20.86B.0041.P01.0211111022 11/11/2002 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bf8000-1c00000 [ 0.000000] RAMDISK: 364e2000 - 37269000 [ 0.000000] ACPI: RSDP 000ff9b0 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 3fff0000 00030 (v01 INTEL SBR20 00000001 MSFT 01000000) [ 0.000000] ACPI: FACP 3fff0030 00074 (v01 INTEL SBR20 00000001 MSFT 01000000) [ 0.000000] ACPI: DSDT 3fff0190 02ED1 (v01 INTEL SBR20 00000100 INTL 20020918) [ 0.000000] ACPI: FACS 3ffff000 00040 [ 0.000000] ACPI: APIC 3fff00b0 00090 (v01 INTEL SBR20 00000001 MSFT 01000000) [ 0.000000] ACPI: OEMR 3fff0140 00050 (v01 INTEL SBR20 00000001 MSFT 01000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c182ff80, node_mem_map f5ce2200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec81400] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec81400, GSI 48-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 88 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77c2000 s31616 r0 d21632 u53248 [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-74-generic root=UUID=f683df2b-5513-4e3c-92a3-a6a1d4afdc32 ro cli console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4193792 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1010808k/1048512k available (5652k kernel code, 37252k reserved, 2781k data, 720k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc183d000 - 0xc18f1000 ( 720 kB) [ 0.000000] .data : 0xc1585084 - 0xc183c6c0 (2781 kB) [ 0.000000] .text : 0xc1000000 - 0xc1585084 (5652 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:1024 16 [ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2790.931 MHz processor. [ 0.012004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.86 BogoMIPS (lpj=11163724) [ 0.020006] pid_max: default: 32768 minimum: 301 [ 0.024039] Security Framework initialized [ 0.028033] AppArmor: AppArmor initialized [ 0.032007] Yama: becoming mindful. [ 0.036089] Mount-cache hash table entries: 512 [ 0.040235] Initializing cgroup subsys cpuacct [ 0.044015] Initializing cgroup subsys memory [ 0.048017] Initializing cgroup subsys devices [ 0.052008] Initializing cgroup subsys freezer [ 0.056008] Initializing cgroup subsys blkio [ 0.060017] Initializing cgroup subsys perf_event [ 0.064047] CPU: Physical Processor ID: 0 [ 0.068008] CPU: Processor Core ID: 0 [ 0.072010] mce: CPU supports 4 MCE banks [ 0.076019] CPU0: Thermal monitoring enabled (TM1) [ 0.084450] ACPI: Core revision 20110623 [ 0.089104] ACPI Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to type ANY [ 0.096009] (20110623/dswload2-227) [ 0.100029] ACPI Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to type ANY [ 0.108010] (20110623/dswload2-227) [ 0.112029] ACPI Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to type ANY [ 0.120011] (20110623/dswload2-227) [ 0.123587] ACPI Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to type ANY [ 0.128011] (20110623/dswload2-227) [ 0.132020] ACPI Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to type ANY [ 0.140012] (20110623/dswload2-227) [ 0.144023] ACPI Warning: Type override - [GPEN] had invalid type (String) for Scope operator, changed to type ANY [ 0.152012] (20110623/dswload2-227) [ 0.156024] ACPI Warning: Type override - [GPST] had invalid type (String) for Scope operator, changed to type ANY [ 0.164013] (20110623/dswload2-227) [ 0.168025] ACPI Warning: Type override - [GP1N] had invalid type (String) for Scope operator, changed to type ANY [ 0.176014] (20110623/dswload2-227) [ 0.180025] ACPI Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to type ANY [ 0.188015] (20110623/dswload2-227) [ 0.192026] ACPI Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to type ANY [ 0.200015] (20110623/dswload2-227) [ 0.204027] ACPI Warning: Type override - [SBID] had invalid type (String) for Scope operator, changed to type ANY [ 0.208017] (20110623/dswload2-227) [ 0.212027] ACPI Warning: Type override - [SWCE] had invalid type (String) for Scope operator, changed to type ANY [ 0.220017] (20110623/dswload2-227) [ 0.224029] ACPI Warning: Type override - [CMS2] had invalid type (String) for Scope operator, changed to type ANY [ 0.228018] (20110623/dswload2-227) [ 0.237477] ftrace: allocating 25542 entries in 50 pages [ 0.244130] Enabling APIC mode: Flat. Using 3 I/O APICs [ 0.248608] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.294621] CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 [ 0.304018] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.306639] ... version: 0 [ 0.308021] ... bit width: 40 [ 0.312020] ... generic registers: 18 [ 0.316021] ... value mask: 000000ffffffffff [ 0.320021] ... max period: 0000007fffffffff [ 0.324021] ... fixed-purpose events: 0 [ 0.328021] ... event mask: 000000000003ffff [ 0.332357] NMI watchdog enabled, takes one hw-pmu counter. [ 0.336247] CPU 1 irqstacks, hard=f58b2000 soft=f58b4000 [ 0.336251] Booting Node 0, Processors #1 [ 0.340304] smpboot cpu 1: start_ip = 9b000 [ 0.016000] Initializing CPU#1 [ 0.436069] NMI watchdog enabled, takes one hw-pmu counter. [ 0.440196] CPU 2 irqstacks, hard=f58c0000 soft=f58c2000 [ 0.440200] #2 [ 0.441779] smpboot cpu 2: start_ip = 9b000 [ 0.016000] Initializing CPU#2 [ 0.540085] NMI watchdog enabled, takes one hw-pmu counter. [ 0.544228] CPU 3 irqstacks, hard=f58f6000 soft=f58f8000 [ 0.544232] #3 Ok. [ 0.548040] smpboot cpu 3: start_ip = 9b000 [ 0.016000] Initializing CPU#3 [ 0.644074] NMI watchdog enabled, takes one hw-pmu counter. [ 0.648083] Brought up 4 CPUs [ 0.652046] Total of 4 processors activated (22329.20 BogoMIPS). [ 0.660195] devtmpfs: initialized [ 0.663580] EVM: security.selinux [ 0.664046] EVM: security.SMACK64 [ 0.668045] EVM: security.capability [ 0.672094] PM: Registering ACPI NVS region at 3ffff000 (4096 bytes) [ 0.677880] print_constraints: dummy: [ 0.680082] RTC time: 4:56:35, date: 06/27/15 [ 0.684110] NET: Registered protocol family 16 [ 0.688286] Trying to unpack rootfs image as initramfs... [ 0.688366] EISA bus registered [ 0.688433] ACPI: bus type pci registered [ 0.688710] PCI: PCI BIOS revision 2.10 entry at 0xfdb55, last bus=9 [ 0.688714] PCI: Using configuration type 1 for base access [ 0.716129] bio: create slab at 0 [ 0.720387] ACPI: Added _OSI(Module Device) [ 0.724063] ACPI: Added _OSI(Processor Device) [ 0.728060] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.732072] ACPI: Added _OSI(Processor Aggregator Device) [ 0.741296] ACPI: EC: Look up EC in DSDT [ 0.749133] ACPI: Interpreter enabled [ 0.752074] ACPI: (supports S0 S1 S4 S5) [ 0.756932] ACPI: Using IOAPIC for interrupt routing [ 0.770076] ACPI: EC: GPE = 0x8, I/O: command/status = 0xca7, data = 0xca6 [ 0.772316] ACPI: No dock devices found. [ 0.776061] HEST: Table not found. [ 0.780067] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.784277] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.788466] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.788474] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.788481] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.788488] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored) [ 0.788513] pci 0000:00:00.0: [8086:254c] type 0 class 0x000600 [ 0.788592] pci 0000:00:00.1: [8086:2541] type 0 class 0x00ff00 [ 0.788681] pci 0000:00:03.0: [8086:2545] type 1 class 0x000604 [ 0.788739] pci 0000:00:03.1: [8086:2546] type 0 class 0x00ff00 [ 0.788880] pci 0000:00:1d.0: [8086:2482] type 0 class 0x000c03 [ 0.788944] pci 0000:00:1d.0: reg 20: [io 0xd040-0xd05f] [ 0.788997] pci 0000:00:1d.1: [8086:2484] type 0 class 0x000c03 [ 0.789060] pci 0000:00:1d.1: reg 20: [io 0xd020-0xd03f] [ 0.789113] pci 0000:00:1d.2: [8086:2487] type 0 class 0x000c03 [ 0.789178] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f] [ 0.789260] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.789327] pci 0000:00:1f.0: [8086:2480] type 0 class 0x000601 [ 0.789442] pci 0000:00:1f.1: [8086:248b] type 0 class 0x000101 [ 0.789464] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.789481] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.789497] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.789512] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.789528] pci 0000:00:1f.1: reg 20: [io 0x03a0-0x03af] [ 0.789544] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.789589] pci 0000:00:1f.3: [8086:2483] type 0 class 0x000c05 [ 0.789654] pci 0000:00:1f.3: reg 20: [io 0x0580-0x059f] [ 0.789789] pci 0000:03:1c.0: [8086:1461] type 0 class 0x000800 [ 0.789812] pci 0000:03:1c.0: reg 10: [mem 0xfebe0000-0xfebe0fff] [ 0.789924] pci 0000:03:1d.0: [8086:1460] type 1 class 0x000604 [ 0.790019] pci 0000:03:1e.0: [8086:1461] type 0 class 0x000800 [ 0.790042] pci 0000:03:1e.0: reg 10: [mem 0xfebf0000-0xfebf0fff] [ 0.790184] pci 0000:03:1f.0: [8086:1460] type 1 class 0x000604 [ 0.790265] pci 0000:00:03.0: PCI bridge to [bus 03-09] [ 0.792072] pci 0000:00:03.0: bridge window [io 0x4000-0xcfff] [ 0.792081] pci 0000:00:03.0: bridge window [mem 0xfd100000-0xfebfffff] [ 0.792138] pci 0000:07:01.0: [8086:b154] type 1 class 0x000604 [ 0.792255] pci 0000:07:02.0: [8086:b154] type 1 class 0x000604 [ 0.792410] pci 0000:03:1d.0: PCI bridge to [bus 07-09] [ 0.796071] pci 0000:03:1d.0: bridge window [io 0x9000-0xcfff] [ 0.796081] pci 0000:03:1d.0: bridge window [mem 0xfdf00000-0xfeafffff] [ 0.796157] pci 0000:08:04.0: [9004:6915] type 0 class 0x000200 [ 0.796192] pci 0000:08:04.0: reg 10: [mem 0xfe480000-0xfe4fffff] [ 0.796213] pci 0000:08:04.0: reg 14: [io 0x9000-0x90ff] [ 0.796278] pci 0000:08:04.0: reg 30: [mem 0xfe440000-0xfe47ffff pref] [ 0.796326] pci 0000:08:04.0: supports D1 D2 [ 0.796331] pci 0000:08:04.0: PME# supported from D0 D1 D2 [ 0.796341] pci 0000:08:04.0: PME# disabled [ 0.796372] pci 0000:08:05.0: [9004:6915] type 0 class 0x000200 [ 0.796401] pci 0000:08:05.0: reg 10: [mem 0xfe380000-0xfe3fffff] [ 0.796419] pci 0000:08:05.0: reg 14: [io 0x9400-0x94ff] [ 0.796490] pci 0000:08:05.0: reg 30: [mem 0xfe400000-0xfe43ffff pref] [ 0.796538] pci 0000:08:05.0: supports D1 D2 [ 0.796543] pci 0000:08:05.0: PME# supported from D0 D1 D2 [ 0.796552] pci 0000:08:05.0: PME# disabled [ 0.796582] pci 0000:08:06.0: [9004:6915] type 0 class 0x000200 [ 0.796611] pci 0000:08:06.0: reg 10: [mem 0xfe300000-0xfe37ffff] [ 0.796629] pci 0000:08:06.0: reg 14: [io 0x9800-0x98ff] [ 0.796694] pci 0000:08:06.0: reg 30: [mem 0xfe2c0000-0xfe2fffff pref] [ 0.796739] pci 0000:08:06.0: supports D1 D2 [ 0.796744] pci 0000:08:06.0: PME# supported from D0 D1 D2 [ 0.796752] pci 0000:08:06.0: PME# disabled [ 0.796781] pci 0000:08:07.0: [9004:6915] type 0 class 0x000200 [ 0.796815] pci 0000:08:07.0: reg 10: [mem 0xfe200000-0xfe27ffff] [ 0.796836] pci 0000:08:07.0: reg 14: [io 0xa000-0xa0ff] [ 0.796901] pci 0000:08:07.0: reg 30: [mem 0xfe280000-0xfe2bffff pref] [ 0.796945] pci 0000:08:07.0: supports D1 D2 [ 0.796950] pci 0000:08:07.0: PME# supported from D0 D1 D2 [ 0.796959] pci 0000:08:07.0: PME# disabled [ 0.797019] pci 0000:07:01.0: PCI bridge to [bus 08-08] [ 0.800078] pci 0000:07:01.0: bridge window [io 0x9000-0xafff] [ 0.800088] pci 0000:07:01.0: bridge window [mem 0xfdf00000-0xfe4fffff] [ 0.800176] pci 0000:09:04.0: [9004:6915] type 0 class 0x000200 [ 0.804072] pci 0000:09:04.0: reg 10: [mem 0xfea80000-0xfeafffff] [ 0.804090] pci 0000:09:04.0: reg 14: [io 0xb000-0xb0ff] [ 0.804155] pci 0000:09:04.0: reg 30: [mem 0xfea40000-0xfea7ffff pref] [ 0.804206] pci 0000:09:04.0: supports D1 D2 [ 0.804211] pci 0000:09:04.0: PME# supported from D0 D1 D2 [ 0.804221] pci 0000:09:04.0: PME# disabled [ 0.804252] pci 0000:09:05.0: [9004:6915] type 0 class 0x000200 [ 0.804281] pci 0000:09:05.0: reg 10: [mem 0xfe980000-0xfe9fffff] [ 0.804300] pci 0000:09:05.0: reg 14: [io 0xb400-0xb4ff] [ 0.804376] pci 0000:09:05.0: reg 30: [mem 0xfea00000-0xfea3ffff pref] [ 0.804421] pci 0000:09:05.0: supports D1 D2 [ 0.804426] pci 0000:09:05.0: PME# supported from D0 D1 D2 [ 0.804435] pci 0000:09:05.0: PME# disabled [ 0.804465] pci 0000:09:06.0: [9004:6915] type 0 class 0x000200 [ 0.804493] pci 0000:09:06.0: reg 10: [mem 0xfe900000-0xfe97ffff] [ 0.804512] pci 0000:09:06.0: reg 14: [io 0xb800-0xb8ff] [ 0.804576] pci 0000:09:06.0: reg 30: [mem 0xfe8c0000-0xfe8fffff pref] [ 0.804620] pci 0000:09:06.0: supports D1 D2 [ 0.804625] pci 0000:09:06.0: PME# supported from D0 D1 D2 [ 0.804634] pci 0000:09:06.0: PME# disabled [ 0.804663] pci 0000:09:07.0: [9004:6915] type 0 class 0x000200 [ 0.804692] pci 0000:09:07.0: reg 10: [mem 0xfe800000-0xfe87ffff] [ 0.804710] pci 0000:09:07.0: reg 14: [io 0xc000-0xc0ff] [ 0.804775] pci 0000:09:07.0: reg 30: [mem 0xfe880000-0xfe8bffff pref] [ 0.804828] pci 0000:09:07.0: supports D1 D2 [ 0.804833] pci 0000:09:07.0: PME# supported from D0 D1 D2 [ 0.804841] pci 0000:09:07.0: PME# disabled [ 0.804901] pci 0000:07:02.0: PCI bridge to [bus 09-09] [ 0.808076] pci 0000:07:02.0: bridge window [io 0xb000-0xcfff] [ 0.808089] pci 0000:07:02.0: bridge window [mem 0xfe500000-0xfeafffff] [ 0.808180] pci 0000:04:01.0: [8086:b154] type 1 class 0x000604 [ 0.808291] pci 0000:04:02.0: [8086:b154] type 1 class 0x000604 [ 0.808400] pci 0000:04:03.0: [9005:801e] type 0 class 0x000100 [ 0.808433] pci 0000:04:03.0: reg 10: [io 0x8000-0x80ff] [ 0.808456] pci 0000:04:03.0: reg 14: [mem 0xfdef0000-0xfdef1fff 64bit] [ 0.808473] pci 0000:04:03.0: reg 1c: [io 0x8400-0x84ff] [ 0.808510] pci 0000:04:03.0: reg 30: [mem 0xfde00000-0xfde7ffff pref] [ 0.808630] pci 0000:03:1f.0: PCI bridge to [bus 04-06] [ 0.812074] pci 0000:03:1f.0: bridge window [io 0x4000-0x8fff] [ 0.812085] pci 0000:03:1f.0: bridge window [mem 0xfd100000-0xfdefffff] [ 0.816077] pci 0000:05:04.0: [9004:6915] type 0 class 0x000200 [ 0.816107] pci 0000:05:04.0: reg 10: [mem 0xfd680000-0xfd6fffff] [ 0.816126] pci 0000:05:04.0: reg 14: [io 0x4000-0x40ff] [ 0.816199] pci 0000:05:04.0: reg 30: [mem 0xfd640000-0xfd67ffff pref] [ 0.816254] pci 0000:05:04.0: supports D1 D2 [ 0.816259] pci 0000:05:04.0: PME# supported from D0 D1 D2 [ 0.816269] pci 0000:05:04.0: PME# disabled [ 0.816299] pci 0000:05:05.0: [9004:6915] type 0 class 0x000200 [ 0.816328] pci 0000:05:05.0: reg 10: [mem 0xfd580000-0xfd5fffff] [ 0.816347] pci 0000:05:05.0: reg 14: [io 0x4400-0x44ff] [ 0.816411] pci 0000:05:05.0: reg 30: [mem 0xfd600000-0xfd63ffff pref] [ 0.816457] pci 0000:05:05.0: supports D1 D2 [ 0.816462] pci 0000:05:05.0: PME# supported from D0 D1 D2 [ 0.816470] pci 0000:05:05.0: PME# disabled [ 0.816506] pci 0000:05:06.0: [9004:6915] type 0 class 0x000200 [ 0.816535] pci 0000:05:06.0: reg 10: [mem 0xfd500000-0xfd57ffff] [ 0.816553] pci 0000:05:06.0: reg 14: [io 0x4800-0x48ff] [ 0.816617] pci 0000:05:06.0: reg 30: [mem 0xfd4c0000-0xfd4fffff pref] [ 0.816662] pci 0000:05:06.0: supports D1 D2 [ 0.816668] pci 0000:05:06.0: PME# supported from D0 D1 D2 [ 0.816677] pci 0000:05:06.0: PME# disabled [ 0.816707] pci 0000:05:07.0: [9004:6915] type 0 class 0x000200 [ 0.816740] pci 0000:05:07.0: reg 10: [mem 0xfd400000-0xfd47ffff] [ 0.816762] pci 0000:05:07.0: reg 14: [io 0x5000-0x50ff] [ 0.816827] pci 0000:05:07.0: reg 30: [mem 0xfd480000-0xfd4bffff pref] [ 0.816872] pci 0000:05:07.0: supports D1 D2 [ 0.816877] pci 0000:05:07.0: PME# supported from D0 D1 D2 [ 0.816885] pci 0000:05:07.0: PME# disabled [ 0.816945] pci 0000:04:01.0: PCI bridge to [bus 05-05] [ 0.820076] pci 0000:04:01.0: bridge window [io 0x4000-0x5fff] [ 0.820087] pci 0000:04:01.0: bridge window [mem 0xfd100000-0xfd6fffff] [ 0.820168] pci 0000:06:04.0: [9004:6915] type 0 class 0x000200 [ 0.820199] pci 0000:06:04.0: reg 10: [mem 0xfdc80000-0xfdcfffff] [ 0.820217] pci 0000:06:04.0: reg 14: [io 0x6000-0x60ff] [ 0.820282] pci 0000:06:04.0: reg 30: [mem 0xfdc40000-0xfdc7ffff pref] [ 0.820330] pci 0000:06:04.0: supports D1 D2 [ 0.820335] pci 0000:06:04.0: PME# supported from D0 D1 D2 [ 0.820344] pci 0000:06:04.0: PME# disabled [ 0.820375] pci 0000:06:05.0: [9004:6915] type 0 class 0x000200 [ 0.820404] pci 0000:06:05.0: reg 10: [mem 0xfdb80000-0xfdbfffff] [ 0.820422] pci 0000:06:05.0: reg 14: [io 0x6400-0x64ff] [ 0.820491] pci 0000:06:05.0: reg 30: [mem 0xfdc00000-0xfdc3ffff pref] [ 0.820554] pci 0000:06:05.0: supports D1 D2 [ 0.820560] pci 0000:06:05.0: PME# supported from D0 D1 D2 [ 0.820568] pci 0000:06:05.0: PME# disabled [ 0.820597] pci 0000:06:06.0: [9004:6915] type 0 class 0x000200 [ 0.820627] pci 0000:06:06.0: reg 10: [mem 0xfdb00000-0xfdb7ffff] [ 0.820645] pci 0000:06:06.0: reg 14: [io 0x6800-0x68ff] [ 0.820709] pci 0000:06:06.0: reg 30: [mem 0xfdac0000-0xfdafffff pref] [ 0.820754] pci 0000:06:06.0: supports D1 D2 [ 0.820759] pci 0000:06:06.0: PME# supported from D0 D1 D2 [ 0.820767] pci 0000:06:06.0: PME# disabled [ 0.820795] pci 0000:06:07.0: [9004:6915] type 0 class 0x000200 [ 0.820824] pci 0000:06:07.0: reg 10: [mem 0xfda00000-0xfda7ffff] [ 0.820843] pci 0000:06:07.0: reg 14: [io 0x7000-0x70ff] [ 0.820907] pci 0000:06:07.0: reg 30: [mem 0xfda80000-0xfdabffff pref] [ 0.820952] pci 0000:06:07.0: supports D1 D2 [ 0.820957] pci 0000:06:07.0: PME# supported from D0 D1 D2 [ 0.820966] pci 0000:06:07.0: PME# disabled [ 0.821025] pci 0000:04:02.0: PCI bridge to [bus 06-06] [ 0.824072] pci 0000:04:02.0: bridge window [io 0x6000-0x7fff] [ 0.824082] pci 0000:04:02.0: bridge window [mem 0xfd700000-0xfdcfffff] [ 0.824173] pci 0000:01:03.0: [8086:1229] type 0 class 0x000200 [ 0.824200] pci 0000:01:03.0: reg 10: [mem 0xfd0e0000-0xfd0e0fff] [ 0.824216] pci 0000:01:03.0: reg 14: [io 0x3400-0x343f] [ 0.824231] pci 0000:01:03.0: reg 18: [mem 0xfd0a0000-0xfd0bffff] [ 0.824275] pci 0000:01:03.0: reg 30: [mem 0xfd090000-0xfd09ffff pref] [ 0.824317] pci 0000:01:03.0: supports D1 D2 [ 0.824322] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.824331] pci 0000:01:03.0: PME# disabled [ 0.824365] pci 0000:01:04.0: [8086:100e] type 0 class 0x000200 [ 0.824394] pci 0000:01:04.0: reg 10: [mem 0xfd060000-0xfd07ffff] [ 0.824420] pci 0000:01:04.0: reg 18: [io 0x3440-0x347f] [ 0.824550] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 0.824559] pci 0000:01:04.0: PME# disabled [ 0.824598] pci 0000:01:09.0: [8086:b154] type 1 class 0x000604 [ 0.824704] pci 0000:01:0c.0: [1002:4752] type 0 class 0x000300 [ 0.824731] pci 0000:01:0c.0: reg 10: [mem 0xfc000000-0xfcffffff] [ 0.824748] pci 0000:01:0c.0: reg 14: [io 0x3000-0x30ff] [ 0.824765] pci 0000:01:0c.0: reg 18: [mem 0xfd0f0000-0xfd0f0fff] [ 0.824813] pci 0000:01:0c.0: reg 30: [mem 0xfd0c0000-0xfd0dffff pref] [ 0.824854] pci 0000:01:0c.0: supports D1 D2 [ 0.824897] pci 0000:00:1e.0: PCI bridge to [bus 01-02] (subtractive decode) [ 0.828069] pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff] [ 0.828080] pci 0000:00:1e.0: bridge window [mem 0xfa900000-0xfd0fffff] [ 0.828097] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.828103] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.828175] pci 0000:02:04.0: [9004:6915] type 0 class 0x000200 [ 0.828206] pci 0000:02:04.0: reg 10: [mem 0xfac00000-0xfac7ffff] [ 0.828225] pci 0000:02:04.0: reg 14: [io 0x2000-0x20ff] [ 0.828314] pci 0000:02:04.0: reg 30: [mem 0xfac80000-0xfacbffff pref] [ 0.828363] pci 0000:02:04.0: supports D1 D2 [ 0.828368] pci 0000:02:04.0: PME# supported from D0 D1 D2 [ 0.828377] pci 0000:02:04.0: PME# disabled [ 0.828408] pci 0000:02:05.0: [9004:6915] type 0 class 0x000200 [ 0.828437] pci 0000:02:05.0: reg 10: [mem 0xfad00000-0xfad7ffff] [ 0.828456] pci 0000:02:05.0: reg 14: [io 0x1800-0x18ff] [ 0.828521] pci 0000:02:05.0: reg 30: [mem 0xfacc0000-0xfacfffff pref] [ 0.828567] pci 0000:02:05.0: supports D1 D2 [ 0.828572] pci 0000:02:05.0: PME# supported from D0 D1 D2 [ 0.828581] pci 0000:02:05.0: PME# disabled [ 0.828610] pci 0000:02:06.0: [9004:6915] type 0 class 0x000200 [ 0.828640] pci 0000:02:06.0: reg 10: [mem 0xfad80000-0xfadfffff] [ 0.828658] pci 0000:02:06.0: reg 14: [io 0x1400-0x14ff] [ 0.828724] pci 0000:02:06.0: reg 30: [mem 0xfae00000-0xfae3ffff pref] [ 0.828770] pci 0000:02:06.0: supports D1 D2 [ 0.828775] pci 0000:02:06.0: PME# supported from D0 D1 D2 [ 0.828784] pci 0000:02:06.0: PME# disabled [ 0.828835] pci 0000:02:07.0: [9004:6915] type 0 class 0x000200 [ 0.828867] pci 0000:02:07.0: reg 10: [mem 0xfae80000-0xfaefffff] [ 0.828886] pci 0000:02:07.0: reg 14: [io 0x1000-0x10ff] [ 0.828952] pci 0000:02:07.0: reg 30: [mem 0xfae40000-0xfae7ffff pref] [ 0.828998] pci 0000:02:07.0: supports D1 D2 [ 0.829003] pci 0000:02:07.0: PME# supported from D0 D1 D2 [ 0.829012] pci 0000:02:07.0: PME# disabled [ 0.829071] pci 0000:01:09.0: PCI bridge to [bus 02-02] [ 0.832077] pci 0000:01:09.0: bridge window [io 0x1000-0x2fff] [ 0.832087] pci 0000:01:09.0: bridge window [mem 0xfa900000-0xfaefffff] [ 0.832125] pci_bus 0000:00: on NUMA node 0 [ 0.832142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.832356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.832557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P6._PRT] [ 0.832700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P7._PRT] [ 0.832933] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.850973] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.858594] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.866234] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.874011] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.881635] ACPI: PCI Interrupt Link [LNKE] (IRQs *11 12 14 15) [ 0.888070] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.895188] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.900431] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.908369] vgaarb: device added: PCI:0000:01:0c.0,decodes=io+mem,owns=io+mem,locks=none [ 0.912082] vgaarb: loaded [ 0.914789] vgaarb: bridge control possible 0000:01:0c.0 [ 0.916442] i2c-core: driver [aat2870] using legacy suspend method [ 0.920075] i2c-core: driver [aat2870] using legacy resume method [ 0.924337] SCSI subsystem initialized [ 0.928178] libata version 3.00 loaded. [ 0.928270] usbcore: registered new interface driver usbfs [ 0.932132] usbcore: registered new interface driver hub [ 0.936149] usbcore: registered new device driver usb [ 0.940313] PCI: Using ACPI for IRQ routing [ 0.944095] PCI: pci_cache_line_size set to 64 bytes [ 0.944459] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.944467] reserve RAM buffer: 000000003fff0000 - 000000003fffffff [ 0.944771] NetLabel: Initializing [ 0.948078] NetLabel: domain hash size = 128 [ 0.952080] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.956118] NetLabel: unlabeled traffic allowed by default [ 0.985254] AppArmor: AppArmor Filesystem Enabled [ 0.988144] pnp: PnP ACPI init [ 0.992126] ACPI: bus type pnp registered [ 0.996320] pnp 00:00: [bus 00-ff] [ 0.996328] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.996334] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.996340] pnp 00:00: [io 0x0d00-0xffff window] [ 0.996346] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.996352] pnp 00:00: [mem 0x00000000 window] [ 0.996358] pnp 00:00: [mem 0x40000000-0xffffffff window] [ 0.996532] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.996580] pnp 00:01: [io 0x0092] [ 0.996586] pnp 00:01: [io 0x00b2-0x00b3] [ 0.996591] pnp 00:01: [io 0x03f0-0x03f1] [ 0.996596] pnp 00:01: [io 0x0400-0x04bf] [ 0.996601] pnp 00:01: [io 0x04d0-0x04d1] [ 0.996606] pnp 00:01: [io 0x0010-0x001f] [ 0.996611] pnp 00:01: [io 0x040b] [ 0.996616] pnp 00:01: [io 0x04d6] [ 0.996620] pnp 00:01: [io 0x0c14] [ 0.996625] pnp 00:01: [io 0x0c49] [ 0.996630] pnp 00:01: [io 0x0c52] [ 0.996634] pnp 00:01: [io 0x0c6c] [ 0.996639] pnp 00:01: [io 0x0c6f] [ 0.996644] pnp 00:01: [io 0x0f50-0x0f57] [ 0.996649] pnp 00:01: [io 0x0c00-0x0c01] [ 0.996654] pnp 00:01: [io 0x0c98] [ 0.996659] pnp 00:01: [io 0x0cd6-0x0cd7] [ 0.996664] pnp 00:01: [io 0x002e-0x002f] [ 0.996668] pnp 00:01: [io 0x0530-0x0531] [ 0.996673] pnp 00:01: [io 0x0500-0x052f] [ 0.996678] pnp 00:01: [io 0x0532-0x053f] [ 0.996683] pnp 00:01: [io 0x0540-0x055f] [ 0.996688] pnp 00:01: [io 0x0560-0x057f] [ 0.996693] pnp 00:01: [io 0x05a0-0x05bf] [ 0.996957] system 00:01: [io 0x03f0-0x03f1] has been reserved [ 1.000089] system 00:01: [io 0x0400-0x04bf] has been reserved [ 1.004085] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 1.008092] system 00:01: [io 0x040b] has been reserved [ 1.012084] system 00:01: [io 0x04d6] has been reserved [ 1.016087] system 00:01: [io 0x0c14] has been reserved [ 1.024081] system 00:01: [io 0x0c49] has been reserved [ 1.028092] system 00:01: [io 0x0c52] has been reserved [ 1.032091] system 00:01: [io 0x0c6c] has been reserved [ 1.036093] system 00:01: [io 0x0c6f] has been reserved [ 1.040085] system 00:01: [io 0x0f50-0x0f57] has been reserved [ 1.044106] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 1.048098] system 00:01: [io 0x0c98] has been reserved [ 1.052092] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 1.056085] system 00:01: [io 0x0530-0x0531] has been reserved [ 1.060093] system 00:01: [io 0x0500-0x052f] has been reserved [ 1.064090] system 00:01: [io 0x0532-0x053f] has been reserved [ 1.068092] system 00:01: [io 0x0540-0x055f] has been reserved [ 1.072084] system 00:01: [io 0x0560-0x057f] has been reserved [ 1.076096] system 00:01: [io 0x05a0-0x05bf] has been reserved [ 1.080096] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.080171] pnp 00:02: [dma 4] [ 1.080181] pnp 00:02: [io 0x0000-0x000f] [ 1.080192] pnp 00:02: [io 0x0080] [ 1.080205] pnp 00:02: [io 0x0081-0x0083] [ 1.080210] pnp 00:02: [io 0x0084-0x0086] [ 1.080215] pnp 00:02: [io 0x0087] [ 1.080220] pnp 00:02: [io 0x0088] [ 1.080225] pnp 00:02: [io 0x0089-0x008b] [ 1.080230] pnp 00:02: [io 0x008c-0x008e] [ 1.080234] pnp 00:02: [io 0x008f] [ 1.080239] pnp 00:02: [io 0x0090-0x0091] [ 1.080244] pnp 00:02: [io 0x0093-0x009f] [ 1.080249] pnp 00:02: [io 0x00c0-0x00df] [ 1.080344] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.080375] pnp 00:03: [io 0x0070-0x0071] [ 1.080381] pnp 00:03: [io 0x0072-0x0073] [ 1.080386] pnp 00:03: [io 0x0074-0x0075] [ 1.080391] pnp 00:03: [io 0x0076-0x0077] [ 1.080411] pnp 00:03: [irq 8] [ 1.080487] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.080509] pnp 00:04: [io 0x0061] [ 1.080575] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.080597] pnp 00:05: [io 0x00f0-0x00ff] [ 1.080609] pnp 00:05: [irq 13] [ 1.080698] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.080778] pnp 00:06: [io 0x0060] [ 1.080784] pnp 00:06: [io 0x0064] [ 1.080796] pnp 00:06: [irq 1] [ 1.080891] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.081023] pnp 00:07: [io 0x03f2-0x03f3] [ 1.081030] pnp 00:07: [io 0x03f4-0x03f5] [ 1.081035] pnp 00:07: [io 0x03f7] [ 1.081048] pnp 00:07: [irq 6] [ 1.081054] pnp 00:07: [dma 2] [ 1.081186] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.081512] pnp 00:08: [io 0x03f8-0x03ff] [ 1.081527] pnp 00:08: [irq 4] [ 1.081717] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.082044] pnp 00:09: [io 0x02f8-0x02ff] [ 1.082060] pnp 00:09: [irq 3] [ 1.082225] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.082574] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (disabled) [ 1.082602] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 1.082608] pnp 00:0b: [mem 0xffe00000-0xffefffff] [ 1.082614] pnp 00:0b: [mem 0xffd00000-0xffdfffff] [ 1.082620] pnp 00:0b: [mem 0xffc00000-0xffcfffff] [ 1.082703] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active) [ 1.083063] pnp: PnP ACPI: found 12 devices [ 1.084100] ACPI: ACPI bus type pnp unregistered [ 1.088081] PnPBIOS: Disabled by ACPI PNP [ 1.132526] Switching to clocksource acpi_pm [ 1.136248] PCI: max bus depth: 3 pci_try_num: 4 [ 1.136372] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff] [ 1.136094] Freeing initrd memory: 13852k freed [ 1.147934] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff]) [ 1.157912] pci 0000:07:01.0: PCI bridge to [bus 08-08] [ 1.163148] pci 0000:07:01.0: bridge window [io 0x9000-0xafff] [ 1.169254] pci 0000:07:01.0: bridge window [mem 0xfdf00000-0xfe4fffff] [ 1.176067] pci 0000:07:02.0: PCI bridge to [bus 09-09] [ 1.181303] pci 0000:07:02.0: bridge window [io 0xb000-0xcfff] [ 1.187405] pci 0000:07:02.0: bridge window [mem 0xfe500000-0xfeafffff] [ 1.194201] pci 0000:03:1d.0: PCI bridge to [bus 07-09] [ 1.199438] pci 0000:03:1d.0: bridge window [io 0x9000-0xcfff] [ 1.205542] pci 0000:03:1d.0: bridge window [mem 0xfdf00000-0xfeafffff] [ 1.212347] pci 0000:04:01.0: PCI bridge to [bus 05-05] [ 1.217584] pci 0000:04:01.0: bridge window [io 0x4000-0x5fff] [ 1.223687] pci 0000:04:01.0: bridge window [mem 0xfd100000-0xfd6fffff] [ 1.230489] pci 0000:04:02.0: PCI bridge to [bus 06-06] [ 1.235720] pci 0000:04:02.0: bridge window [io 0x6000-0x7fff] [ 1.241822] pci 0000:04:02.0: bridge window [mem 0xfd700000-0xfdcfffff] [ 1.248619] pci 0000:03:1f.0: PCI bridge to [bus 04-06] [ 1.253856] pci 0000:03:1f.0: bridge window [io 0x4000-0x8fff] [ 1.259957] pci 0000:03:1f.0: bridge window [mem 0xfd100000-0xfdefffff] [ 1.266755] pci 0000:00:03.0: PCI bridge to [bus 03-09] [ 1.271992] pci 0000:00:03.0: bridge window [io 0x4000-0xcfff] [ 1.278093] pci 0000:00:03.0: bridge window [mem 0xfd100000-0xfebfffff] [ 1.284901] pci 0000:01:09.0: PCI bridge to [bus 02-02] [ 1.290138] pci 0000:01:09.0: bridge window [io 0x1000-0x2fff] [ 1.296239] pci 0000:01:09.0: bridge window [mem 0xfa900000-0xfaefffff] [ 1.303037] pci 0000:00:1e.0: PCI bridge to [bus 01-02] [ 1.308275] pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff] [ 1.314376] pci 0000:00:1e.0: bridge window [mem 0xfa900000-0xfd0fffff] [ 1.321237] pci 0000:00:1e.0: setting latency timer to 64 [ 1.321251] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.321255] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 1.321260] pci_bus 0000:03: resource 0 [io 0x4000-0xcfff] [ 1.321264] pci_bus 0000:03: resource 1 [mem 0xfd100000-0xfebfffff] [ 1.321268] pci_bus 0000:07: resource 0 [io 0x9000-0xcfff] [ 1.321272] pci_bus 0000:07: resource 1 [mem 0xfdf00000-0xfeafffff] [ 1.321275] pci_bus 0000:08: resource 0 [io 0x9000-0xafff] [ 1.321279] pci_bus 0000:08: resource 1 [mem 0xfdf00000-0xfe4fffff] [ 1.321283] pci_bus 0000:09: resource 0 [io 0xb000-0xcfff] [ 1.321287] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfeafffff] [ 1.321290] pci_bus 0000:04: resource 0 [io 0x4000-0x8fff] [ 1.321294] pci_bus 0000:04: resource 1 [mem 0xfd100000-0xfdefffff] [ 1.321298] pci_bus 0000:05: resource 0 [io 0x4000-0x5fff] [ 1.321302] pci_bus 0000:05: resource 1 [mem 0xfd100000-0xfd6fffff] [ 1.321305] pci_bus 0000:06: resource 0 [io 0x6000-0x7fff] [ 1.321309] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfdcfffff] [ 1.321313] pci_bus 0000:01: resource 0 [io 0x1000-0x3fff] [ 1.321317] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfd0fffff] [ 1.321321] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 1.321324] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff] [ 1.321328] pci_bus 0000:02: resource 0 [io 0x1000-0x2fff] [ 1.321332] pci_bus 0000:02: resource 1 [mem 0xfa900000-0xfaefffff] [ 1.321419] NET: Registered protocol family 2 [ 1.329908] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.337561] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.346135] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.353476] TCP: Hash tables configured (established 131072 bind 65536) [ 1.360133] TCP reno registered [ 1.363277] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.369233] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.375782] NET: Registered protocol family 1 [ 1.380223] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.386948] pci 0000:00:1d.0: PCI INT A disabled [ 1.391588] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.398313] pci 0000:00:1d.1: PCI INT B disabled [ 1.402956] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.409683] pci 0000:00:1d.2: PCI INT C disabled [ 1.414452] pci 0000:01:03.0: Firmware left e100 interrupts enabled; disabling [ 1.421701] pci 0000:01:0c.0: Boot video device [ 1.421722] PCI: CLS 64 bytes, default 64 [ 1.422297] audit: initializing netlink socket (disabled) [ 1.427724] type=2000 audit(1435380994.424:1): initialized [ 1.455877] highmem bounce pool size: 64 pages [ 1.460356] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.470084] VFS: Disk quotas dquot_6.5.2 [ 1.474139] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.481651] fuse init (API version 7.17) [ 1.485766] msgmni has been set to 1729 [ 1.490495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.497969] io scheduler noop registered [ 1.501907] io scheduler deadline registered [ 1.506197] io scheduler cfq registered (default) [ 1.511353] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.516974] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.523888] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.531296] ACPI: Power Button [PWRF] [ 1.536494] ERST: Table is not found! [ 1.540171] GHES: HEST is not enabled! [ 1.543989] isapnp: Scanning for PnP cards... [ 1.544160] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.568732] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.700408] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.935383] isapnp: No Plug & Play device found [ 1.992912] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.019088] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.025157] Linux agpgart interface v0.103 [ 2.032175] brd: module loaded [ 2.036660] loop: module loaded [ 2.040140] ata_piix 0000:00:1f.1: version 2.13 [ 2.040155] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 2.046263] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.053485] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.054089] scsi0 : ata_piix [ 2.057145] scsi1 : ata_piix [ 2.060120] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3a0 irq 14 [ 2.067000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3a8 irq 15 [ 2.074706] Fixed MDIO Bus: probed [ 2.078168] tun: Universal TUN/TAP device driver, 1.6 [ 2.083229] tun: (C) 1999-2004 Max Krasnyansky [ 2.089528] PPP generic driver version 2.4.2 [ 2.094017] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.100601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.106821] uhci_hcd: USB Universal Host Controller Interface driver [ 2.113227] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.120384] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.120390] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.125717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.133162] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d040 [ 2.139184] hub 1-0:1.0: USB hub found [ 2.142947] hub 1-0:1.0: 2 ports detected [ 2.147124] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.154277] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.154283] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.159608] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 2.167055] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d020 [ 2.173043] hub 2-0:1.0: USB hub found [ 2.176809] hub 2-0:1.0: 2 ports detected [ 2.180969] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.188124] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.188129] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.193456] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 2.200903] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000 [ 2.206897] hub 3-0:1.0: USB hub found [ 2.210665] hub 3-0:1.0: 2 ports detected [ 2.214935] usbcore: registered new interface driver libusual [ 2.220756] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.227550] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.228845] ata1.00: ATAPI: JLMS DVD-ROM LTD-166S, DS08, max UDMA/44 [ 2.229434] ata1.00: configured for UDMA/44 [ 2.230530] scsi 0:0:0:0: CD-ROM JLMS DVD-ROM LTD-166S DS08 PQ: 0 ANSI: 5 [ 2.231457] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 2.231462] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.231720] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.231991] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.274121] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.279322] mousedev: PS/2 mouse device common for all mice [ 2.285197] rtc_cmos 00:03: RTC can wake from S4 [ 2.289981] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.296105] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 2.302090] device-mapper: uevent: version 1.0.3 [ 2.306860] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.315378] EISA: Probing bus 0 at eisa.0 [ 2.319444] Cannot allocate resource for EISA slot 1 [ 2.324419] Cannot allocate resource for EISA slot 2 [ 2.329396] Cannot allocate resource for EISA slot 3 [ 2.334373] Cannot allocate resource for EISA slot 4 [ 2.339348] Cannot allocate resource for EISA slot 5 [ 2.344323] Cannot allocate resource for EISA slot 6 [ 2.349295] Cannot allocate resource for EISA slot 7 [ 2.354268] Cannot allocate resource for EISA slot 8 [ 2.359243] EISA: Detected 0 cards. [ 2.362766] cpufreq-nforce2: No nForce2 chipset. [ 2.367397] cpuidle: using governor ladder [ 2.371516] cpuidle: using governor menu [ 2.375446] EFI Variables Facility v0.08 2004-May-17 [ 2.380937] TCP cubic registered [ 2.384391] NET: Registered protocol family 10 [ 2.389967] NET: Registered protocol family 17 [ 2.394431] Registering the dns_resolver key type [ 2.399193] Using IPI No-Shortcut mode [ 2.403197] PM: Hibernation image not present or could not be loaded. [ 2.403217] registered taskstats version 1 [ 2.419110] Magic number: 3:342:920 [ 2.422939] rtc_cmos 00:03: setting system clock to 2015-06-27 04:56:37 UTC (1435380997) [ 2.424056] Refined TSC clocksource calibration: 2790.998 MHz. [ 2.424064] Switching to clocksource tsc [ 2.440831] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.446873] EDD information not available. [ 2.451346] Freeing unused kernel memory: 720k freed [ 2.457604] Write protecting the kernel text: 5656k [ 2.462594] Write protecting the kernel read-only data: 2332k [ 2.504559] udevd[98]: starting version 175 [ 2.639299] starfire.c:v1.03 7/26/2000 Written by Donald Becker [ 2.639306] (unofficial 2.2/2.4 kernel port, version 2.1, July 6, 2008) [ 2.653957] starfire: polling (NAPI) enabled [ 2.656597] FDC 0 is a National Semiconductor PC87306 [ 2.656632] aic79xx 0000:04:03.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 [ 2.685144] starfire 0000:08:04.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48 [ 2.699318] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.705508] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.724806] e100 0000:01:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.725424] eth0: Adaptec Starfire 6915 at f8100000, 00:00:d1:ef:f6:d1, IRQ 48. [ 2.760734] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.767803] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.861732] e100 0000:01:03.0: PME# disabled [ 2.862866] e100 0000:01:03.0: eth1: addr 0xfd0e0000, irq 20, MAC addr 00:03:47:31:05:63 [ 2.871070] e1000 0000:01:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.924329] eth0: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 2.931647] eth0: scatter-gather and hardware TCP cksumming enabled. [ 2.938089] starfire 0000:08:05.0: PCI INT A -> GSI 49 (level, low) -> IRQ 49 [ 2.949396] eth2: Adaptec Starfire 6915 at f8200000, 00:00:d1:ef:f6:d2, IRQ 49. [ 3.155286] eth2: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 3.162648] eth2: scatter-gather and hardware TCP cksumming enabled. [ 3.169514] starfire 0000:08:06.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 [ 3.180751] eth3: Adaptec Starfire 6915 at f8300000, 00:00:d1:ef:f6:d3, IRQ 50. [ 3.187104] e1000 0000:01:04.0: eth4: (PCI:33MHz:32-bit) 00:03:47:31:05:64 [ 3.187119] e1000 0000:01:04.0: eth4: Intel(R) PRO/1000 Network Connection [ 3.400406] eth3: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 3.407721] eth3: scatter-gather and hardware TCP cksumming enabled. [ 3.414134] starfire 0000:08:07.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 [ 3.425140] eth5: Adaptec Starfire 6915 at f8400000, 00:00:d1:ef:f6:d4, IRQ 51. [ 3.631047] eth5: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 3.638361] eth5: scatter-gather and hardware TCP cksumming enabled. [ 3.644757] starfire 0000:09:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 3.655863] eth6: Adaptec Starfire 6915 at f8500000, 00:00:d1:ef:f9:75, IRQ 52. [ 3.861767] eth6: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 3.869081] eth6: scatter-gather and hardware TCP cksumming enabled. [ 3.875516] starfire 0000:09:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 3.886646] eth7: Adaptec Starfire 6915 at f8600000, 00:00:d1:ef:f9:76, IRQ 53. [ 4.092574] eth7: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 4.099891] eth7: scatter-gather and hardware TCP cksumming enabled. [ 4.106304] starfire 0000:09:06.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 4.117541] eth8: Adaptec Starfire 6915 at f8700000, 00:00:d1:ef:f9:77, IRQ 54. [ 4.323457] eth8: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 4.330787] eth8: scatter-gather and hardware TCP cksumming enabled. [ 4.337200] starfire 0000:09:07.0: PCI INT A -> GSI 55 (level, low) -> IRQ 55 [ 4.348460] eth9: Adaptec Starfire 6915 at f8800000, 00:00:d1:ef:f9:78, IRQ 55. [ 4.554366] eth9: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 4.561684] eth9: scatter-gather and hardware TCP cksumming enabled. [ 4.568119] starfire 0000:05:04.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 4.579482] eth10: Adaptec Starfire 6915 at f8900000, 00:00:d1:ef:da:0d, IRQ 24. [ 4.785495] eth10: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 4.792901] eth10: scatter-gather and hardware TCP cksumming enabled. [ 4.799403] starfire 0000:05:05.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 [ 4.810853] eth11: Adaptec Starfire 6915 at f8a00000, 00:00:d1:ef:da:0e, IRQ 25. [ 5.016858] eth11: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 5.024265] eth11: scatter-gather and hardware TCP cksumming enabled. [ 5.030761] starfire 0000:05:06.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 [ 5.042307] eth12: Adaptec Starfire 6915 at f8b00000, 00:00:d1:ef:da:0f, IRQ 26. [ 5.248321] eth12: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 5.255727] eth12: scatter-gather and hardware TCP cksumming enabled. [ 5.262226] starfire 0000:05:07.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 [ 5.273836] eth13: Adaptec Starfire 6915 at f8c00000, 00:00:d1:ef:da:10, IRQ 27. [ 5.479857] eth13: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 5.487268] eth13: scatter-gather and hardware TCP cksumming enabled. [ 5.493768] starfire 0000:06:04.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 5.505483] eth14: Adaptec Starfire 6915 at f8d00000, 00:00:d1:ef:f9:35, IRQ 28. [ 5.711480] eth14: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 5.718890] eth14: scatter-gather and hardware TCP cksumming enabled. [ 5.725419] starfire 0000:06:05.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 [ 5.737129] eth15: Adaptec Starfire 6915 at f8e00000, 00:00:d1:ef:f9:36, IRQ 29. [ 5.943130] eth15: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 5.950537] eth15: scatter-gather and hardware TCP cksumming enabled. [ 5.957059] starfire 0000:06:06.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 5.968874] eth16: Adaptec Starfire 6915 at f8f00000, 00:00:d1:ef:f9:37, IRQ 30. [ 6.174891] eth16: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 6.182297] eth16: scatter-gather and hardware TCP cksumming enabled. [ 6.188799] starfire 0000:06:07.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 [ 6.200762] eth17: Adaptec Starfire 6915 at f9000000, 00:00:d1:ef:f9:38, IRQ 31. [ 6.406770] eth17: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 6.414177] eth17: scatter-gather and hardware TCP cksumming enabled. [ 6.420672] starfire 0000:02:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.432638] eth18: Adaptec Starfire 6915 at f9100000, 00:00:d1:ef:db:cd, IRQ 18. [ 6.638643] eth18: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 6.646054] eth18: scatter-gather and hardware TCP cksumming enabled. [ 6.652554] starfire 0000:02:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.664706] eth19: Adaptec Starfire 6915 at f9200000, 00:00:d1:ef:db:ce, IRQ 17. [ 6.870707] eth19: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 6.878117] eth19: scatter-gather and hardware TCP cksumming enabled. [ 6.884619] starfire 0000:02:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.896668] eth20: Adaptec Starfire 6915 at f9300000, 00:00:d1:ef:db:cf, IRQ 19. [ 7.102701] eth20: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 7.110108] eth20: scatter-gather and hardware TCP cksumming enabled. [ 7.116594] starfire 0000:02:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.129067] eth21: Adaptec Starfire 6915 at f9400000, 00:00:d1:ef:db:d0, IRQ 16. [ 7.335079] eth21: MII PHY found at address 1, status 0x7809 advertising 0x01e1. [ 7.342486] eth21: scatter-gather and hardware TCP cksumming enabled. [ 7.924049] scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 7.924052] [ 7.924053] aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66MHz, 512 SCBs [ 7.945800] scsi 2:0:0:0: Direct-Access SEAGATE ST336607LW 0004 PQ: 0 ANSI: 3 [ 7.953941] scsi target2:0:0: asynchronous [ 7.958051] scsi2:A:0:0: Tagged Queuing enabled. Depth 32 [ 7.963562] scsi target2:0:0: Beginning Domain Validation [ 7.971956] scsi target2:0:0: wide asynchronous [ 7.978746] scsi target2:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM WRFLOW PCOMP (6.25 ns, offset 63) [ 7.999994] scsi target2:0:0: Ending Domain Validation [ 11.598499] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 11.598841] sd 2:0:0:0: [sda] 71687372 512-byte logical blocks: (36.7 GB/34.1 GiB) [ 11.599956] sd 2:0:0:0: [sda] Write Protect is off [ 11.599963] sd 2:0:0:0: [sda] Mode Sense: ab 00 10 08 [ 11.601267] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 11.628622] sda: sda1 sda2 < sda5 > [ 11.635609] sd 2:0:0:0: [sda] Attached SCSI disk [ 11.882415] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 11.889307] EXT4-fs (sda1): write access will be enabled during recovery [ 12.312585] EXT4-fs (sda1): orphan cleanup on readonly fs [ 12.318021] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655658 [ 12.318169] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655657 [ 12.318206] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655656 [ 12.318247] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655666 [ 12.318310] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655665 [ 12.318343] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655664 [ 12.318374] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655663 [ 12.318406] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655662 [ 12.318437] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655661 [ 12.318469] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655651 [ 12.318486] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655650 [ 12.318518] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655649 [ 12.327842] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655592 [ 12.327889] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655603 [ 12.327923] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655602 [ 12.335378] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654574 [ 12.340395] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654572 [ 12.340429] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654328 [ 12.349195] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 660356 [ 12.349238] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 660355 [ 12.355804] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 657784 [ 12.355848] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 657782 [ 12.355881] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 657780 [ 12.355917] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654476 [ 12.355936] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654474 [ 12.355985] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654472 [ 12.369087] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1207421 [ 12.369132] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1207450 [ 12.381522] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 532955 [ 12.390406] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 529620 [ 12.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654342 [ 12.390494] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654341 [ 12.390526] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654338 [ 12.397212] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654314 [ 12.397247] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654313 [ 12.397280] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654299 [ 12.409643] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 525022 [ 12.415526] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 526921 [ 12.415570] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 526874 [ 12.415608] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654296 [ 12.415639] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654295 [ 12.415670] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654294 [ 12.415709] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654204 [ 12.415743] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654198 [ 12.424203] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654186 [ 12.424238] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 654185 [ 12.424276] EXT4-fs (sda1): 46 orphan inodes deleted [ 12.429249] EXT4-fs (sda1): recovery complete [ 12.468274] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.580585] Adding 1047548k swap on /dev/sda5. Priority:-1 extents:1 across:1047548k [ 17.617871] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.617890] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.617905] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 17.617920] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 17.617935] ADDRCONF(NETDEV_UP): eth4: link is not ready [ 17.617950] ADDRCONF(NETDEV_UP): eth5: link is not ready [ 17.617963] ADDRCONF(NETDEV_UP): eth6: link is not ready [ 17.617977] ADDRCONF(NETDEV_UP): eth7: link is not ready [ 17.617992] ADDRCONF(NETDEV_UP): eth8: link is not ready [ 17.618008] ADDRCONF(NETDEV_UP): eth9: link is not ready [ 17.618023] ADDRCONF(NETDEV_UP): eth10: link is not ready [ 17.618039] ADDRCONF(NETDEV_UP): eth11: link is not ready [ 17.618053] ADDRCONF(NETDEV_UP): eth12: link is not ready [ 17.618067] ADDRCONF(NETDEV_UP): eth13: link is not ready [ 17.618082] ADDRCONF(NETDEV_UP): eth14: link is not ready [ 17.618097] ADDRCONF(NETDEV_UP): eth15: link is not ready [ 17.618112] ADDRCONF(NETDEV_UP): eth16: link is not ready [ 17.618128] ADDRCONF(NETDEV_UP): eth17: link is not ready [ 17.618143] ADDRCONF(NETDEV_UP): eth18: link is not ready [ 17.618158] ADDRCONF(NETDEV_UP): eth19: link is not ready [ 17.618175] ADDRCONF(NETDEV_UP): eth20: link is not ready [ 17.618191] ADDRCONF(NETDEV_UP): eth21: link is not ready [ 17.627429] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.757241] udevd[381]: starting version 175 [ 17.942484] intel_rng: FWH not detected [ 17.944594] parport_pc 00:0a: [io 0x0378-0x037f] [ 17.944833] parport_pc 00:0a: [irq 7] [ 17.945844] parport_pc 00:0a: activated [ 17.945860] parport_pc 00:0a: reported by Plug and Play ACPI [ 17.945933] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 17.948819] lp: driver loaded but no devices found [ 17.982400] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.040721] lp0: using parport0 (interrupt-driven). [ 18.050555] EDAC MC: Ver: 2.1.0 [ 18.075581] EDAC e7xxx: tolm = 40000, remapbase = ffc000, remaplimit = 0 [ 18.075656] EDAC MC0: Giving out device to 'e7xxx_edac' 'E7501': DEV 0000:00:00.0 [ 18.075711] EDAC PCI0: Giving out device to module 'e7xxx_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 18.184209] udevd[427]: renamed network interface eth1 to rename3 [ 18.224449] udevd[428]: renamed network interface eth4 to eth1 [ 18.240978] type=1400 audit(1435381013.316:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=519 comm="apparmor_parser" [ 18.242101] type=1400 audit(1435381013.316:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=519 comm="apparmor_parser" [ 18.242645] type=1400 audit(1435381013.316:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=519 comm="apparmor_parser" [ 18.247619] type=1400 audit(1435381013.320:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=521 comm="apparmor_parser" [ 18.248854] type=1400 audit(1435381013.324:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=521 comm="apparmor_parser" [ 18.249468] type=1400 audit(1435381013.324:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=521 comm="apparmor_parser" [ 18.349596] udevd[400]: renamed network interface eth6 to rename8 [ 18.381974] udevd[397]: renamed network interface eth5 to eth4 [ 18.445611] eth15: Link is down [ 18.449773] udevd[400]: renamed network interface rename8 to eth5 [ 18.469966] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory [ 18.542198] ppdev: user-space parallel port driver [ 19.026139] type=1400 audit(1435381014.100:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=799 comm="apparmor_parser" [ 19.029178] type=1400 audit(1435381014.104:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=799 comm="apparmor_parser" [ 19.286386] ADDRCONF(NETDEV_UP): eth15: link is not ready [ 19.302688] udevd[392]: renamed network interface eth0 to eth23 [ 19.323644] udevd[427]: renamed network interface rename3 to eth0 [ 19.347334] udevd[448]: renamed network interface eth21 to eth22 [ 19.383636] udevd[402]: renamed network interface eth7 to eth6 [ 19.411763] udevd[405]: renamed network interface eth8 to eth7 [ 19.414207] eth20: Link is down [ 19.431957] ADDRCONF(NETDEV_UP): eth20: link is not ready [ 19.435020] eth9: Link is down [ 19.449371] ADDRCONF(NETDEV_UP): eth9: link is not ready [ 19.452311] eth14: Link is down [ 19.466888] ADDRCONF(NETDEV_UP): eth14: link is not ready [ 19.469576] eth5: Link is down [ 19.482273] ADDRCONF(NETDEV_UP): eth5: link is not ready [ 19.485017] eth13: Link is down [ 19.495049] ADDRCONF(NETDEV_UP): eth13: link is not ready [ 19.497957] eth16: Link is down [ 19.507622] ADDRCONF(NETDEV_UP): eth16: link is not ready [ 19.512211] eth3: Link is down [ 19.521360] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 19.546583] udevd[394]: renamed network interface eth2 to rename4 [ 19.548520] eth12: Link is down [ 19.556382] ADDRCONF(NETDEV_UP): eth12: link is not ready [ 19.558986] eth23: Link is down [ 19.567917] ADDRCONF(NETDEV_UP): eth23: link is not ready [ 19.570600] eth4: Link is down [ 19.579373] ADDRCONF(NETDEV_UP): eth4: link is not ready [ 19.581659] eth11: Link is down [ 19.591833] ADDRCONF(NETDEV_UP): eth11: link is not ready [ 19.595447] eth10: Link is down [ 19.609422] ADDRCONF(NETDEV_UP): eth10: link is not ready [ 19.612209] eth17: Link is down [ 19.623944] ADDRCONF(NETDEV_UP): eth17: link is not ready [ 19.627446] eth18: Link is down [ 19.642639] ADDRCONF(NETDEV_UP): eth18: link is not ready [ 19.645734] eth7: Link is down [ 19.659102] ADDRCONF(NETDEV_UP): eth7: link is not ready [ 19.662629] eth19: Link is down [ 19.679900] ADDRCONF(NETDEV_UP): eth19: link is not ready [ 19.681099] device eth15 entered promiscuous mode [ 19.701187] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.704345] e100 0000:01:03.0: eth0: NIC Link is Up 100 Mbps Full Duplex [ 19.706941] eth22: Link is down [ 19.726874] ADDRCONF(NETDEV_UP): eth22: link is not ready [ 19.748924] udevd[394]: renamed network interface rename4 to eth21 [ 19.750521] eth6: Link is down [ 19.766435] ADDRCONF(NETDEV_UP): eth6: link is not ready [ 19.767000] device eth9 entered promiscuous mode [ 19.767122] device eth14 entered promiscuous mode [ 19.773898] device eth5 entered promiscuous mode [ 19.776502] device eth13 entered promiscuous mode [ 19.777491] device eth3 entered promiscuous mode [ 19.777666] device eth16 entered promiscuous mode [ 19.782804] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.783709] device eth12 entered promiscuous mode [ 19.784706] device eth4 entered promiscuous mode [ 19.785662] device eth23 entered promiscuous mode [ 19.789870] device eth20 entered promiscuous mode [ 19.791457] device eth10 entered promiscuous mode [ 19.791594] device eth11 entered promiscuous mode [ 19.794068] device eth19 entered promiscuous mode [ 19.803433] device eth22 entered promiscuous mode [ 19.822549] device eth7 entered promiscuous mode [ 19.823444] device eth17 entered promiscuous mode [ 19.823592] device eth18 entered promiscuous mode [ 19.834582] device eth6 entered promiscuous mode [ 20.044494] eth15: Link is up, running at 100Mbit full-duplex [ 20.045912] ADDRCONF(NETDEV_CHANGE): eth15: link becomes ready [ 20.145673] eth21: Link is down [ 20.193786] ADDRCONF(NETDEV_UP): eth21: link is not ready [ 20.207239] device eth21 entered promiscuous mode [ 21.020023] eth20: Link is up, running at 100Mbit full-duplex [ 21.021748] ADDRCONF(NETDEV_CHANGE): eth20: link becomes ready [ 21.041969] eth9: Link is up, running at 100Mbit full-duplex [ 21.044599] ADDRCONF(NETDEV_CHANGE): eth9: link becomes ready [ 21.076422] eth14: Link is up, running at 100Mbit full-duplex [ 21.077620] ADDRCONF(NETDEV_CHANGE): eth14: link becomes ready [ 21.102763] eth16: Link is up, running at 100Mbit full-duplex [ 21.104125] ADDRCONF(NETDEV_CHANGE): eth16: link becomes ready [ 21.105537] eth5: Link is up, running at 100Mbit full-duplex [ 21.107676] eth13: Link is up, running at 100Mbit full-duplex [ 21.108926] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready [ 21.109209] ADDRCONF(NETDEV_CHANGE): eth13: link becomes ready [ 21.115098] eth3: Link is up, running at 100Mbit full-duplex [ 21.117107] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 21.145843] eth12: Link is up, running at 100Mbit full-duplex [ 21.147121] ADDRCONF(NETDEV_CHANGE): eth12: link becomes ready [ 21.159639] eth23: Link is up, running at 100Mbit full-duplex [ 21.161008] ADDRCONF(NETDEV_CHANGE): eth23: link becomes ready [ 21.178160] eth4: Link is up, running at 100Mbit full-duplex [ 21.179320] ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready [ 21.193342] eth11: Link is up, running at 100Mbit full-duplex [ 21.194523] ADDRCONF(NETDEV_CHANGE): eth11: link becomes ready [ 21.200684] eth10: Link is up, running at 100Mbit full-duplex [ 21.201844] ADDRCONF(NETDEV_CHANGE): eth10: link becomes ready [ 21.206999] eth17: Link is up, running at 100Mbit full-duplex [ 21.208496] ADDRCONF(NETDEV_CHANGE): eth17: link becomes ready [ 21.245871] eth18: Link is up, running at 100Mbit full-duplex [ 21.247074] ADDRCONF(NETDEV_CHANGE): eth18: link becomes ready [ 21.259331] eth7: Link is up, running at 100Mbit full-duplex [ 21.261012] ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready [ 21.280364] eth19: Link is up, running at 100Mbit full-duplex [ 21.281584] ADDRCONF(NETDEV_CHANGE): eth19: link becomes ready [ 21.302293] eth22: Link is up, running at 100Mbit full-duplex [ 21.303462] ADDRCONF(NETDEV_CHANGE): eth22: link becomes ready [ 21.355819] eth6: Link is up, running at 100Mbit full-duplex [ 21.357118] ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready [ 21.755245] eth21: Link is up, running at 100Mbit full-duplex [ 21.756644] ADDRCONF(NETDEV_CHANGE): eth21: link becomes ready [ 21.991059] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 21.995811] init: failsafe main process (1050) killed by TERM signal [ 22.004696] device eth1 entered promiscuous mode [ 22.017642] init: network-manager main process (2391) terminated with status 127 [ 22.017801] init: network-manager main process ended, respawning [ 22.123282] type=1400 audit(1435381017.196:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=2462 comm="apparmor_parser" [ 22.124836] type=1400 audit(1435381017.200:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=2462 comm="apparmor_parser"