Gusty: cannot switch to virtual consoles

Bug #146912 reported by Fel
0
Affects Status Importance Assigned to Milestone
Ubuntu
Incomplete
Undecided
Unassigned

Bug Description

Just installed Gusty and found out that keys Ctrl+Alt+F1 through F6 no longer work. They used to work in Feisty. Below I included uname and dmesg info:

uname
Linux Bee 2.6.22-12-generic #1 SMP Sun Sep 23 18:11:30 GMT 2007 i686 GNU/Linux

dmesg
[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524192) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524192
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524192
[ 0.000000] On node 0 totalpages: 524192
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292513 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FAE40, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFA0000, 0034 (r1 A M I OEMRSDT 9000605 MSFT 97)
[ 0.000000] ACPI: FACP 7FFA0200, 0084 (r2 A M I OEMFACP 9000605 MSFT 97)
[ 0.000000] ACPI: DSDT 7FFA0440, 888C (r1 A0483 A0483035 35 INTL 20060113)
[ 0.000000] ACPI: FACS 7FFAE000, 0040
[ 0.000000] ACPI: APIC 7FFA0390, 006C (r1 A M I OEMAPIC 9000605 MSFT 97)
[ 0.000000] ACPI: MCFG 7FFA0400, 003C (r1 A M I OEMMCFG 9000605 MSFT 97)
[ 0.000000] ACPI: OEMB 7FFAE040, 007B (r1 A M I AMI_OEM 9000605 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
[ 0.000000] Built 1 zonelists. Total pages: 520097
[ 0.000000] Kernel command line: root=UUID=3e30ae76-b85e-45a3-aebc-44076dcdbc15 ro quiet splash vga=0x303
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3410.941 MHz processor.
[ 14.610888] Console: colour dummy device 80x25
[ 14.611129] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 14.611412] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.695331] Memory: 2067336k/2096768k available (2017k kernel code, 28224k reserved, 918k data, 364k init, 1179264k highmem)
[ 14.695340] virtual kernel memory layout:
[ 14.695341] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 14.695342] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.695343] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 14.695344] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 14.695345] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 14.695346] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB)
[ 14.695347] .text : 0xc0100000 - 0xc02f8456 (2017 kB)
[ 14.695350] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.695384] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 14.775346] Calibrating delay using timer specific routine.. 6827.34 BogoMIPS (lpj=13654685)
[ 14.775369] Security Framework v1.0.0 initialized
[ 14.775373] SELinux: Disabled at boot.
[ 14.775384] Mount-cache hash table entries: 512
[ 14.775494] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001
[ 14.775502] monitor/mwait feature present.
[ 14.775504] using mwait in idle threads.
[ 14.775510] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 14.775512] CPU: L2 cache: 2048K
[ 14.775514] CPU: Physical Processor ID: 0
[ 14.775516] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e59d 00000000 00000001
[ 14.775526] Compat vDSO mapped to ffffe000.
[ 14.775539] Checking 'hlt' instruction... OK.
[ 14.791433] SMP alternatives: switching to UP code
[ 14.791806] Early unpacking initramfs... done
[ 15.044636] ACPI: Core revision 20070126
[ 15.044708] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.087586] CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 05
[ 15.087604] SMP alternatives: switching to SMP code
[ 15.087678] Booting processor 1/1 eip 3000
[ 15.097987] Initializing CPU#1
[ 15.175049] Calibrating delay using timer specific routine.. 6821.74 BogoMIPS (lpj=13643480)
[ 15.175059] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001
[ 15.175065] monitor/mwait feature present.
[ 15.175071] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 15.175074] CPU: L2 cache: 2048K
[ 15.175076] CPU: Physical Processor ID: 0
[ 15.175078] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e59d 00000000 00000001
[ 15.175590] CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 05
[ 15.175627] Total of 2 processors activated (13649.08 BogoMIPS).
[ 15.175772] ENABLING IO-APIC IRQs
[ 15.175949] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.323041] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 15.343040] Brought up 2 CPUs
[ 15.394751] migration_cost=7
[ 15.394908] Booting paravirtualized kernel on bare hardware
[ 15.394969] Time: 22:43:24 Date: 08/29/107
[ 15.394991] NET: Registered protocol family 16
[ 15.395076] EISA bus registered
[ 15.395081] ACPI: bus type pci registered
[ 15.395170] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 15.395172] PCI: Using configuration type 1
[ 15.395174] Setting up standard PCI resources
[ 15.408630] ACPI: EC: Look up EC in DSDT
[ 15.414435] ACPI: Interpreter enabled
[ 15.414439] ACPI: (supports S0 S1 S3 S4 S5)
[ 15.414459] ACPI: Using IOAPIC for interrupt routing
[ 15.423326] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.423340] PCI: Probing PCI hardware (bus 00)
[ 15.423983] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 15.423987] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 15.424885] PCI: Transparent bridge - 0000:00:1e.0
[ 15.424950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.425121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 15.425206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 15.425338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 15.425426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 15.425515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 15.439755] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 15.439877] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 15.439996] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 15.440116] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 15.440240] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 15.440361] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 15.440480] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 15.440600] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 15.440710] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.440720] pnp: PnP ACPI init
[ 15.440729] ACPI: bus type pnp registered
[ 15.443642] pnp: PnP ACPI: found 14 devices
[ 15.443645] ACPI: ACPI bus type pnp unregistered
[ 15.443649] PnPBIOS: Disabled by ACPI PNP
[ 15.443698] PCI: Using ACPI for IRQ routing
[ 15.443701] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.456014] NET: Registered protocol family 8
[ 15.456016] NET: Registered protocol family 20
[ 15.456069] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 15.456078] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[ 15.456083] pnp: 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved
[ 15.456086] pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 15.456089] pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 15.456092] pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 15.456096] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 15.456099] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 15.456105] pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 15.456110] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 15.456113] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 15.456115] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 15.456118] pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 15.458871] Time: tsc clocksource has been installed.
[ 15.486444] PCI: Bridge: 0000:00:01.0
[ 15.486448] IO window: 7000-9fff
[ 15.486452] MEM window: ff600000-ff6fffff
[ 15.486455] PREFETCH window: bfe00000-dfdfffff
[ 15.486459] PCI: Bridge: 0000:00:1c.0
[ 15.486460] IO window: disabled.
[ 15.486465] MEM window: disabled.
[ 15.486469] PREFETCH window: dfe00000-dfefffff
[ 15.486473] PCI: Bridge: 0000:00:1c.4
[ 15.486476] IO window: b000-bfff
[ 15.486481] MEM window: ff800000-ff8fffff
[ 15.486484] PREFETCH window: disabled.
[ 15.486489] PCI: Bridge: 0000:00:1c.5
[ 15.486492] IO window: a000-afff
[ 15.486496] MEM window: ff700000-ff7fffff
[ 15.486500] PREFETCH window: disabled.
[ 15.486504] PCI: Bridge: 0000:00:1e.0
[ 15.486506] IO window: disabled.
[ 15.486510] MEM window: ff900000-ff9fffff
[ 15.486514] PREFETCH window: disabled.
[ 15.486529] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.486534] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.486550] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.486556] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.486572] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.486577] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 15.486594] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 15.486599] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 15.486609] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.486619] NET: Registered protocol family 2
[ 15.522946] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.523012] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 15.523770] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.524023] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.524025] TCP reno registered
[ 15.535084] checking if image is initramfs... it is
[ 15.986513] Switched to high resolution mode on CPU 0
[ 15.986588] Switched to high resolution mode on CPU 1
[ 16.033071] Freeing initrd memory: 7101k freed
[ 16.033555] audit: initializing netlink socket (disabled)
[ 16.033567] audit(1191105805.108:1): initialized
[ 16.033660] highmem bounce pool size: 64 pages
[ 16.035754] VFS: Disk quotas dquot_6.5.1
[ 16.035808] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.035896] io scheduler noop registered
[ 16.035899] io scheduler anticipatory registered
[ 16.035901] io scheduler deadline registered
[ 16.035915] io scheduler cfq registered (default)
[ 16.276517] Boot video device is 0000:01:00.0
[ 16.276600] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 16.276637] assign_interrupt_mode Found MSI capability
[ 16.276668] Allocate Port Service[0000:00:01.0:pcie00]
[ 16.276752] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.276792] assign_interrupt_mode Found MSI capability
[ 16.276825] Allocate Port Service[0000:00:1c.0:pcie00]
[ 16.276861] Allocate Port Service[0000:00:1c.0:pcie02]
[ 16.276944] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 16.276984] assign_interrupt_mode Found MSI capability
[ 16.277017] Allocate Port Service[0000:00:1c.4:pcie00]
[ 16.277051] Allocate Port Service[0000:00:1c.4:pcie02]
[ 16.277137] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 16.277178] assign_interrupt_mode Found MSI capability
[ 16.277210] Allocate Port Service[0000:00:1c.5:pcie00]
[ 16.277247] Allocate Port Service[0000:00:1c.5:pcie02]
[ 16.277405] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 975k, total 16384k
[ 16.277409] vesafb: mode is 800x600x8, linelength=832, pages=31
[ 16.277411] vesafb: protected mode interface info at c000:a118
[ 16.277413] vesafb: pmi: set display start = c00ca1a6, set palette = c00ca268
[ 16.277415] vesafb: scrolling: redraw
[ 16.277418] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 16.277466] fb0: VESA VGA frame buffer device
[ 16.277509] isapnp: Scanning for PnP cards...
[ 16.585879] isapnp: No Plug & Play device found
[ 16.610118] Real Time Clock Driver v1.12ac
[ 16.610214] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.610307] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.610871] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.611569] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 16.611712] input: Macintosh mouse button emulation as /class/input/input0
[ 16.611789] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 16.611792] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 16.614580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.614585] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.614747] mice: PS/2 mouse device common for all mice
[ 16.614858] EISA: Probing bus 0 at eisa.0
[ 16.614881] Cannot allocate resource for EISA slot 7
[ 16.614883] Cannot allocate resource for EISA slot 8
[ 16.614884] EISA: Detected 0 cards.
[ 16.615033] TCP cubic registered
[ 16.615044] NET: Registered protocol family 1
[ 16.615062] Using IPI No-Shortcut mode
[ 16.615208] Magic number: 7:218:756
[ 16.615474] Freeing unused kernel memory: 364k freed
[ 16.652483] input: AT Translated Set 2 keyboard as /class/input/input1
[ 17.803833] AppArmor: AppArmor initialized<5>audit(1191105806.608:2): type=1505 info="AppArmor initialized" pid=1249
[ 17.809605] fuse init (API version 7.8)
[ 17.814047] Failure registering capabilities with primary security module.
[ 17.842267] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 17.842280] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 18.327580] usbcore: registered new interface driver usbfs
[ 18.327615] usbcore: registered new interface driver hub
[ 18.327649] usbcore: registered new device driver usb
[ 18.328709] USB Universal Host Controller Interface driver v3.0
[ 18.328764] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.328779] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 18.328784] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 18.328918] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 18.328949] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
[ 18.329082] usb usb1: configuration #1 chosen from 1 choice
[ 18.329123] hub 1-0:1.0: USB hub found
[ 18.329131] hub 1-0:1.0: 2 ports detected
[ 18.432751] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 18.432766] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 18.432771] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 18.432804] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 18.432836] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
[ 18.432958] usb usb2: configuration #1 chosen from 1 choice
[ 18.432999] hub 2-0:1.0: USB hub found
[ 18.433007] hub 2-0:1.0: 2 ports detected
[ 18.454623] Floppy drive(s): fd0 is 1.44M
[ 18.507157] SCSI subsystem initialized
[ 18.514743] libata version 2.21 loaded.
[ 18.520899] FDC 0 is a post-1991 82077
[ 18.538538] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 18.538552] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 18.538558] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 18.538588] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 18.538618] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000d480
[ 18.538740] usb usb3: configuration #1 chosen from 1 choice
[ 18.538777] hub 3-0:1.0: USB hub found
[ 18.538786] hub 3-0:1.0: 2 ports detected
[ 18.640590] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 18.640605] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 18.640610] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 18.640645] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 18.640676] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 18.640799] usb usb4: configuration #1 chosen from 1 choice
[ 18.640840] hub 4-0:1.0: USB hub found
[ 18.640848] hub 4-0:1.0: 2 ports detected
[ 18.744480] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 18.744490] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 18.744495] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 18.744525] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 18.744553] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d880
[ 18.744675] usb usb5: configuration #1 chosen from 1 choice
[ 18.744713] hub 5-0:1.0: USB hub found
[ 18.744720] hub 5-0:1.0: 2 ports detected
[ 18.849025] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 18.849038] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 18.849043] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 18.849075] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 18.849108] ehci_hcd 0000:00:1a.7: debug port 1
[ 18.849116] PCI: cache line size of 128 is not supported by device 0000:00:1a.7
[ 18.849124] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xffaffc00
[ 18.853001] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 18.853141] usb usb6: configuration #1 chosen from 1 choice
[ 18.853186] hub 6-0:1.0: USB hub found
[ 18.853196] hub 6-0:1.0: 4 ports detected
[ 18.880279] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 18.956348] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 18.956364] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 18.956369] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 18.956400] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 18.956434] ehci_hcd 0000:00:1d.7: debug port 1
[ 18.956441] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 18.956450] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffaff800
[ 18.960340] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 18.960436] usb usb7: configuration #1 chosen from 1 choice
[ 18.960478] hub 7-0:1.0: USB hub found
[ 18.960486] hub 7-0:1.0: 6 ports detected
[ 19.064381] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 19.064389] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 19.064431] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 19.064504] scsi0 : pata_jmicron
[ 19.064559] scsi1 : pata_jmicron
[ 19.064718] ata1: PATA max UDMA/100 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b400 irq 17
[ 19.064725] ata2: PATA max UDMA/100 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b408 irq 17
[ 19.384400] ata1.01: ATAPI: SAMSUNG CDRW/DVD SM-352B, T803, max UDMA/33
[ 19.403872] usb 3-1: device not accepting address 2, error -71
[ 19.556267] ata1.01: configured for UDMA/33
[ 19.722383] scsi 0:0:1:0: CD-ROM SAMSUNG CDRW/DVD SM-352B T803 PQ: 0 ANSI: 5
[ 19.722765] ahci 0000:03:00.0: version 2.2
[ 19.722791] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.732841] sr0: scsi3-mmc drive: 1x/52x writer cd/rw xa/form2 cdda tray
[ 19.732846] Uniform CD-ROM driver Revision: 3.20
[ 19.732901] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 19.736631] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 19.887509] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 20.041578] usb 3-1: configuration #1 chosen from 1 choice
[ 20.054422] usbcore: registered new interface driver hiddev
[ 20.067620] input: HID 062a:0000 as /class/input/input2
[ 20.067648] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-1
[ 20.067660] usbcore: registered new interface driver usbhid
[ 20.067664] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 20.722900] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 20.722906] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 20.722914] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 20.723051] scsi2 : ahci
[ 20.723115] scsi3 : ahci
[ 20.723197] ata3: SATA max UDMA/133 cmd 0xf886c100 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 20.723203] ata4: SATA max UDMA/133 cmd 0xf886c180 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 21.034641] ata3: SATA link down (SStatus 0 SControl 300)
[ 21.346404] ata4: SATA link down (SStatus 0 SControl 300)
[ 21.346476] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 21.396549] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff9ff800-ff9fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 21.396680] ata_piix 0000:00:1f.2: version 2.11
[ 21.396688] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 21.396735] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 21.396777] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 21.396844] scsi4 : ata_piix
[ 21.397719] scsi5 : ata_piix
[ 21.397944] ata5: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 19
[ 21.397947] ata6: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 19
[ 21.598975] ata5.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 21.598980] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 21.665552] ata5.00: configured for UDMA/133
[ 21.873179] ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 21.873184] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 21.939764] ata6.00: configured for UDMA/133
[ 21.939884] scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 21.939958] scsi 4:0:0:0: Attached scsi generic sg1 type 0
[ 21.940055] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 21.940125] scsi 5:0:0:0: Attached scsi generic sg2 type 0
[ 21.940155] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 21.940179] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[ 21.940214] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 21.940248] scsi6 : ata_piix
[ 21.940302] scsi7 : ata_piix
[ 21.940442] ata7: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d082 bmdma 0x0001c880 irq 19
[ 21.940448] ata8: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001cc02 bmdma 0x0001c888 irq 19
[ 22.277018] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 22.277037] sd 4:0:0:0: [sda] Write Protect is off
[ 22.277041] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.277066] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.277133] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 22.277150] sd 4:0:0:0: [sda] Write Protect is off
[ 22.277155] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.277183] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.277190] sda: sda1
[ 22.296211] sd 4:0:0:0: [sda] Attached SCSI disk
[ 22.296273] sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 22.296288] sd 5:0:0:0: [sdb] Write Protect is off
[ 22.296292] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 22.296316] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.296369] sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 22.296384] sd 5:0:0:0: [sdb] Write Protect is off
[ 22.296388] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 22.296415] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.296419] sdb: sdb1 sdb2 sdb3
[ 22.320345] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 22.495867] Attempting manual resume
[ 22.495871] swsusp: Resume From Partition 8:19
[ 22.495873] PM: Checking swsusp image.
[ 22.496039] PM: Resume from disk failed.
[ 22.528114] kjournald starting. Commit interval 5 seconds
[ 22.528124] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.665534] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e500f9]
[ 29.895209] iTCO_vendor_support: vendor-support=0
[ 29.896362] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 29.896451] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 29.896504] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 30.063948] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.065901] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.129947] Linux agpgart interface v0.102 (c) Dave Jones
[ 30.274961] input: PC Speaker as /class/input/input3
[ 30.802989] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 30.803004] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 30.803029] sky2 0000:02:00.0: v1.14 addr 0xff7fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
[ 30.803291] sky2 eth0: addr 00:18:f3:68:a2:68
[ 30.880526] sky2 eth0: enabling interface
[ 30.883468] sky2 eth0: ram buffer 0K
[ 31.256568] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 31.256593] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 31.278429] NET: Registered protocol family 10
[ 31.278499] lo: Disabled Privacy Extensions
[ 31.278534] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.544241] lp: driver loaded but no devices found
[ 32.557066] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 32.559383] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.602123] Adding 2417772k swap on /dev/sdb3. Priority:-1 extents:1 across:2417772k
[ 32.868624] EXT3 FS on sdb1, internal journal
[ 33.129544] kjournald starting. Commit interval 5 seconds
[ 33.137568] EXT3 FS on sda1, internal journal
[ 33.137575] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.165550] kjournald starting. Commit interval 5 seconds
[ 33.165557] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 33.165913] EXT3 FS on sdb2, internal journal
[ 33.165919] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.167791] No dock devices found.
[ 34.224241] input: Power Button (FF) as /class/input/input4
[ 34.224265] ACPI: Power Button (FF) [PWRF]
[ 34.224377] input: Power Button (CM) as /class/input/input5
[ 34.224406] ACPI: Power Button (CM) [PWRB]
[ 35.735288] ppdev: user-space parallel port driver
[ 36.065227] audit(1191091425.433:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5254 profile="/usr/sbin/cupsd"
[ 36.183427] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 36.183434] apm: disabled - APM is not SMP safe.
[ 36.356079] Failure registering capabilities with primary security module.
[ 36.535081] Bluetooth: Core ver 2.11
[ 36.535401] NET: Registered protocol family 31
[ 36.535406] Bluetooth: HCI device and connection manager initialized
[ 36.535412] Bluetooth: HCI socket layer initialized
[ 36.575543] Bluetooth: L2CAP ver 2.8
[ 36.575549] Bluetooth: L2CAP socket layer initialized
[ 36.623114] Bluetooth: RFCOMM socket layer initialized
[ 36.623403] Bluetooth: RFCOMM TTY layer initialized
[ 36.623409] Bluetooth: RFCOMM ver 1.8
[ 43.385680] eth0: no IPv6 routers present

Revision history for this message
Albert Damen (albrt) wrote :

Thank you for taking the time to report this bug and helping to make Ubuntu better.
It looks like this bug may be a duplicate of bug 129910. Can you please run the command:
ps ax | grep tty
and verify the virtual consoles are active?
Secondly, please try the command:
sudo modprobe fbcon
and after that try if you can switch to the virtal consoles?

Revision history for this message
Fel (fdeluda) wrote : Re: [Bug 146912] Re: Gusty: cannot switch to virtual consoles

Your are right, this appeared to be duplicate of 129910 and I marked it as
duplicate in the system. As to modprobe fbcon - ttys start working till next
reboot.
Please note that before upgrading to Gusty this worked stable and I did not
do anything to disable tty or something like that.

On 9/29/07, albert <email address hidden> wrote:
>
> Thank you for taking the time to report this bug and helping to make
> Ubuntu better.
> It looks like this bug may be a duplicate of bug 129910. Can you please
> run the command:
> ps ax | grep tty
> and verify the virtual consoles are active?
> Secondly, please try the command:
> sudo modprobe fbcon
> and after that try if you can switch to the virtal consoles?
>
> ** Changed in: ubuntu
> Status: New => Incomplete
>
> --
> Gusty: cannot switch to virtual consoles
> https://bugs.launchpad.net/bugs/146912
> You received this bug notification because you are a direct subscriber
> of the bug.
>

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.