Ubuntu
linux package

package linux-image-3.13.0-55-generic 3.13.0-55.92 failed to install/upgrade: subprocess new pre-installation script returned error exit status 128

Bug #1467416 reported by Nobby
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Expired
Medium
Unassigned

Bug Description

Update manager crashed whilst installing updates but system has been unstable since update to 14.04.2

Output of "cat /proc/version_signature > version.log" is Ubuntu 3.13.0-55.92-generic 3.13.11-ckt20

Output of "sudo lspci -vnvn > lspci-vnvn.log" is

00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
 Subsystem: Dell Device [1028:040b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=0c <?>
 Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:040b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 43
 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
 Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
 Region 4: I/O ports at 7110 [size=8]
 Expansion ROM at <unassigned> [disabled]
 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee0f00c Data: 41d1
 Capabilities: [d0] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [a4] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
 Subsystem: Dell Device [1028:040b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 40
 Region 0: Memory at f69a0000 (64-bit, non-prefetchable) [size=16]
 Capabilities: [50] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee0f00c Data: 4172
 Kernel driver in use: mei_me

00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550])
 Subsystem: Dell Device [1028:040b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 19
 Region 0: I/O ports at 7100 [size=8]
 Region 1: Memory at f6980000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [c8] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 05)
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 20
 Region 0: Memory at f6900000 (32-bit, non-prefetchable) [disabled] [size=128K]
 Region 1: Memory at f6970000 (32-bit, non-prefetchable) [disabled] [size=4K]
 Region 2: I/O ports at 7020 [disabled] [size=32]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=1 PME-
 Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
  Address: 00000000fee0f00c Data: 41b2
 Capabilities: [e0] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at f6960000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Capabilities: [98] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 44
 Region 0: Memory at f6950000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee0f00c Data: 4192
 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed- WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
  VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=02
   Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
  Desc: PortNumber=0f ComponentID=00 EltType=Config
  Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
   Addr: 00000000fed1c000
 Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00006000-00006fff
 Memory behind bridge: f5500000-f68fffff
 Prefetchable memory behind bridge: 00000000f6e00000-00000000f6ffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Capabilities: [90] Subsystem: Dell Latitude E6510 [1028:040b]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 I/O behind bridge: 00005000-00005fff
 Memory behind bridge: f4100000-f54fffff
 Prefetchable memory behind bridge: 00000000f6c00000-00000000f6dfffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Capabilities: [90] Subsystem: Dell Latitude E6510 [1028:040b]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
 I/O behind bridge: 00002000-00003fff
 Memory behind bridge: f0400000-f2cfffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Capabilities: [90] Subsystem: Dell Latitude E6510 [1028:040b]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=05, subordinate=0a, sec-latency=0
 I/O behind bridge: 00004000-00004fff
 Memory behind bridge: f2d00000-f40fffff
 Prefetchable memory behind bridge: 00000000f6a00000-00000000f6bfffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Capabilities: [90] Subsystem: Dell Latitude E6510 [1028:040b]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 17
 Region 0: Memory at f6940000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Capabilities: [98] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Subsystem: Dell Latitude E6510 [1028:040b]

00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 05)
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=10 <?>
 Kernel driver in use: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b2e] (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
 Subsystem: Dell Device [1028:040b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 0: I/O ports at 70f0 [size=8]
 Region 1: I/O ports at 70e0 [size=4]
 Region 2: I/O ports at 70d0 [size=8]
 Region 3: I/O ports at 70c0 [size=4]
 Region 4: I/O ports at 70b0 [size=16]
 Region 5: I/O ports at 70a0 [size=16]
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 10
 Region 0: Memory at f6930000 (64-bit, non-prefetchable) [size=256]
 Region 4: I/O ports at 7000 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b2d] (rev 05) (prog-if 85 [Master SecO PriO])
 Subsystem: Dell Device [1028:040b]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 0: I/O ports at 7090 [size=8]
 Region 1: I/O ports at 7080 [size=4]
 Region 2: I/O ports at 7070 [size=8]
 Region 3: I/O ports at 7060 [size=4]
 Region 4: I/O ports at 7050 [size=16]
 Region 5: I/O ports at 7040 [size=16]
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ata_piix

00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
 Subsystem: Dell Device [1028:040b]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 18
 Region 0: Memory at f6920000 (64-bit, non-prefetchable) [size=4K]
 Capabilities: [50] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Kernel driver in use: intel ips

02:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:422b] (rev 35)
 Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN [8086:1121]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 41
 Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=8K]
 Capabilities: [c8] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee0100c Data: 41b1
 Capabilities: [e0] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <32us
   ClockPM+ Surprise- LLActRep- BwNot-
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
 Capabilities: [140 v1] Device Serial Number 00-24-d7-ff-ff-84-f4-ac
 Kernel driver in use: iwlwifi

03:00.0 CardBus bridge [0607]: Ricoh Co Ltd CardBus bridge [1180:e476] (rev 02)
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 18
 Region 0: Memory at f2c40000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
 Memory window 0: f0400000-f17fffff (prefetchable)
 Memory window 1: f1800000-f1bfffff
 I/O window 0: 00002000-000020ff
 I/O window 1: 00002400-000024ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001
 Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Capabilities: [98] Power Management version 3
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [80] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
   ClockPM+ Surprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Kernel driver in use: yenta_cardbus

03:00.1 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 03) (prog-if 01)
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 19
 Region 0: Memory at f2c30000 (32-bit, non-prefetchable) [size=256]
 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Capabilities: [78] Power Management version 3
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [80] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
   ClockPM+ Surprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Kernel driver in use: sdhci-pci

03:00.4 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller [1180:e832] (rev 03) (prog-if 10 [OHCI])
 Subsystem: Dell Latitude E6510 [1028:040b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin C routed to IRQ 16
 Region 0: Memory at f2c00000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Capabilities: [78] Power Management version 3
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
 Capabilities: [80] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
   ClockPM+ Surprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Kernel driver in use: firewire_ohci

3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
 Subsystem: Intel Corporation Device [8086:8086]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
 Subsystem: Intel Corporation Device [8086:8086]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
 Subsystem: Intel Corporation Device [8086:8086]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
 Subsystem: Intel Corporation Device [8086:8086]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
 Subsystem: Intel Corporation Device [8086:8086]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
 Subsystem: Intel Corporation Device [8086:8086]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

Output of lsb_release -rd is

Description: Ubuntu 14.04.2 LTS
Release: 14.04

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-55-generic 3.13.0-55.92
ProcVersionSignature: Ubuntu 3.13.0-55.92-generic 3.13.11-ckt20
Uname: Linux 3.13.0-55-generic i686
ApportVersion: 2.14.1-0ubuntu3.11
Architecture: i386
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: paul 4868 F.... pulseaudio
 /dev/snd/seq: timidity 3495 F.... timidity
Date: Mon Jun 22 01:16:07 2015
DuplicateSignature: package:linux-image-3.13.0-55-generic:3.13.0-55.92:subprocess new pre-installation script returned error exit status 128
ErrorMessage: subprocess new pre-installation script returned error exit status 128
HibernationDevice: RESUME=UUID=292a2bba-82e9-414d-a42b-60b70fcded7b
InstallationDate: Installed on 2015-01-21 (151 days ago)
InstallationMedia: Ubuntu 12.04.5 LTS "Precise Pangolin" - Release i386 (20140807.1)
Lsusb:
 Bus 002 Device 003: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
 Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Dell Inc. Latitude E6510
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-55-generic root=UUID=1f654eed-0001-461e-8c03-1f0df9520e48 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.2
SourcePackage: linux
Title: package linux-image-3.13.0-55-generic 3.13.0-55.92 failed to install/upgrade: subprocess new pre-installation script returned error exit status 128
UpgradeStatus: Upgraded to trusty on 2015-06-12 (9 days ago)
dmi.bios.date: 11/20/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A06
dmi.board.name: 02K3Y4
dmi.board.vendor: Dell Inc.
dmi.board.version: A02
dmi.chassis.type: 9
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA06:bd11/20/2010:svnDellInc.:pnLatitudeE6510:pvr0001:rvnDellInc.:rn02K3Y4:rvrA02:cvnDellInc.:ct9:cvr:
dmi.product.name: Latitude E6510
dmi.product.version: 0001
dmi.sys.vendor: Dell Inc.

Revision history for this message
Nobby (paul-plgb-v) wrote :
Revision history for this message
Brad Figg (brad-figg) wrote : Status changed to Confirmed

This change was made by a bot.

Changed in linux (Ubuntu):
status: New → Confirmed
Apport retracing service (apport)
tags: removed: need-duplicate-check
Revision history for this message
Joseph Salisbury (jsalisbury) wrote :

You may need to run the following from a terminal:

sudo apt-get install -f
sudo apt-get clean
sudo apt-get update

Then re-install the package.

If that does not resolve your issue, please mark the bug as "Confirmed"

Changed in linux (Ubuntu):
importance: Undecided → Medium
status: Confirmed → Incomplete
Revision history for this message
Launchpad Janitor (janitor) wrote :

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]

Changed in linux (Ubuntu):
status: Incomplete → Expired
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.