[ 0.000000] Allocated 2359296 bytes for 1024 pacas at c00000000fdc0000 [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] Using PowerMac machine description [ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24 [ 0.000000] cma: Reserved 416 MiB at 0x000000025e000000 [ 0.000000] Found initrd at 0xc000000002700000:0xc00000000465b400 [ 0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 Dual Core [ 0.000000] DART IOMMU initialized for U4 type chipset [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] Freed 2347008 bytes for unused pacas [ 0.000000] Starting Linux PPC64 #18-Ubuntu SMP Tue May 19 18:50:33 UTC 2015 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x200000000 [ 0.000000] cpu_features = 0x0804806318100448 [ 0.000000] possible = 0x1fffffef18500649 [ 0.000000] always = 0x0000000018100040 [ 0.000000] cpu_user_features = 0xdc080000 0x00000000 [ 0.000000] mmu_features = 0x0c000001 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] htab_address = 0xc000000278000000 [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-18-powerpc64-smp (buildd@denneed01) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #18-Ubuntu SMP Tue May 19 18:50:33 UTC 2015 (Ubuntu 3.19.0-18.18-powerpc64-smp 3.19.6) [ 0.000000] Top of RAM: 0x280000000, Total RAM: 0x200000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] numa: Initmem setup node 0 [mem 0x00000000-0x27fffffff] [ 0.000000] numa: NODE_DATA [mem 0x25dfb3a00-0x25dfbefff] [ 0.000000] Section 603 and 605 (node 0) have a circular dependency on usemap and pgdat allocations [ 0.000000] Found U4-PCIE PCI host bridge. Firmware bus number: 0->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp. [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=266, gen1=265 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x280000000, Total RAM: 0x200000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00000000-0x27fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x7fffffff] [ 0.000000] node 0: [mem 0x100000000-0x27fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x27fffffff] [ 0.000000] On node 0 totalpages: 2097152 [ 0.000000] DMA zone: 32768 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 2097152 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 22 pages/cpu @c00000025de00000 s52224 r0 d37888 u262144 [ 0.000000] pcpu-alloc: s52224 r0 d37888 u262144 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064384 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=/dev/mapper/powermac--vg-root ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 7557580K/8388608K available (10376K kernel code, 1928K rwdata, 4216K rodata, 8196K init, 2398K bss, 405044K reserved, 425984K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=256 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs [ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 124 sources [ 0.000000] mpic: Setting up HT PICs workarounds for U3/U4 [ 0.000000] mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] time_init: decrementer frequency = 33.333333 MHz [ 0.000000] time_init: processor frequency = 2500.000000 MHz [ 0.000002] clocksource: timebase mult[1e000005] shift[24] registered [ 0.000005] clockevent: decrementer mult[8888887] shift[32] cpu[0] [ 0.000074] Console: colour dummy device 80x25 [ 0.000078] console [tty0] enabled [ 0.000081] bootconsole [udbg0] disabled [ 0.000231] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.000239] pid_max: default: 32768 minimum: 301 [ 0.000279] Security Framework initialized [ 0.000303] AppArmor: AppArmor initialized [ 0.000306] Yama: becoming mindful. [ 0.001548] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008236] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011316] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011339] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011940] Initializing cgroup subsys memory [ 0.012330] Initializing cgroup subsys devices [ 0.012336] Initializing cgroup subsys freezer [ 0.012342] Initializing cgroup subsys net_cls [ 0.012347] Initializing cgroup subsys blkio [ 0.012352] Initializing cgroup subsys perf_event [ 0.012358] Initializing cgroup subsys net_prio [ 0.012363] Initializing cgroup subsys hugetlb [ 0.012395] ftrace: allocating 27857 entries in 164 pages [ 0.031764] PowerMac SMP probe found 4 cpus [ 0.031875] KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000 [ 0.031880] channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1 [ 0.031922] KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000 [ 0.031926] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.031933] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.031973] SMU i2c /smu@0,0/smu-i2c-control@0 [ 0.031977] channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b [ 0.031980] channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e [ 0.031997] Processor timebase sync using platform function [ 0.032000] mpic: requesting IPIs... [ 0.032056] PPC970/FX/MP performance monitor hardware support registered [ 0.037452] Brought up 4 CPUs [ 0.041151] devtmpfs: initialized [ 0.150228] evm: security.selinux [ 0.150232] evm: security.SMACK64 [ 0.150234] evm: security.SMACK64EXEC [ 0.150236] evm: security.SMACK64TRANSMUTE [ 0.150237] evm: security.SMACK64MMAP [ 0.150239] evm: security.ima [ 0.150241] evm: security.capability [ 0.150437] EEH: devices created [ 0.156763] device-tree: Duplicate name in i2c@18000, renamed to "i2c-bus@0#1" [ 0.158557] NET: Registered protocol family 16 [ 0.158585] eeh_init: Platform EEH operation not found [ 0.160215] cpuidle: using governor ladder [ 0.164207] cpuidle: using governor menu [ 0.172148] PCI: Probing PCI hardware [ 0.172333] PCI host bridge to bus 0000:00 [ 0.172339] pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff]) [ 0.172343] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.172346] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff] [ 0.172350] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.172356] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.172390] pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400 [ 0.172424] PCI: Fixup U4 PCIe bridge range: [mem 0x90000000-0xafffffff] [ 0.172462] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.205359] IOMMU table initialized, virtual merging enabled [ 0.205448] pci 0000:0a:00.0: [10de:0141] type 00 class 0x030000 [ 0.205464] pci 0000:0a:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff] [ 0.205477] pci 0000:0a:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.205490] pci 0000:0a:00.0: reg 0x1c: [mem 0xa0000000-0xa0ffffff 64bit] [ 0.205505] pci 0000:0a:00.0: reg 0x30: [mem 0xa2000000-0xa201ffff pref] [ 0.205632] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.205644] pci 0000:00:0b.0: PCI bridge to [bus 0a] [ 0.205651] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff] [ 0.205655] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xafffffff] [ 0.205662] pci 0000:00:0b.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.205711] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0a [ 0.205808] PCI host bridge to bus 0001:00 [ 0.205813] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff] (bus address [0x0000-0x3fffff]) [ 0.205816] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff] [ 0.205819] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff] [ 0.205822] pci_bus 0001:00: root bus resource [mem 0xb0000000-0xefffffff] [ 0.205825] pci_bus 0001:00: root bus resource [bus 00-ef] [ 0.205829] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff [ 0.205847] pci 0001:00:00.0: [106b:0074] type 00 class 0x060000 [ 0.205936] pci 0001:00:01.0: [1166:0130] type 01 class 0x060400 [ 0.206057] pci 0001:00:02.0: [1166:0130] type 01 class 0x060400 [ 0.206170] pci 0001:00:03.0: [1166:0132] type 01 class 0x060400 [ 0.206279] pci 0001:00:04.0: [1166:0132] type 01 class 0x060400 [ 0.206388] pci 0001:00:05.0: [1166:0132] type 01 class 0x060400 [ 0.206498] pci 0001:00:06.0: [1166:0132] type 01 class 0x060400 [ 0.206611] pci 0001:00:07.0: [106b:0053] type 01 class 0x060400 [ 0.206744] pci 0001:00:08.0: [106b:0054] type 01 class 0x060400 [ 0.206862] pci 0001:00:09.0: [106b:0055] type 01 class 0x060400 [ 0.207070] pci 0001:00:01.0: PCI bridge to [bus 04] [ 0.207148] pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000 [ 0.207162] pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff 64bit] [ 0.207172] pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff 64bit] [ 0.207220] pci 0001:05:04.0: PME# supported from D3hot D3cold [ 0.207313] pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000 [ 0.207327] pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff 64bit] [ 0.207336] pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff 64bit] [ 0.207385] pci 0001:05:04.1: PME# supported from D3hot D3cold [ 0.207475] pci 0001:00:02.0: PCI bridge to [bus 05] [ 0.207483] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.207571] pci 0001:00:03.0: PCI bridge to [bus 06] [ 0.207638] pci 0001:00:04.0: PCI bridge to [bus 07] [ 0.207702] pci 0001:00:05.0: PCI bridge to [bus 08] [ 0.207769] pci 0001:00:06.0: PCI bridge to [bus 09] [ 0.207853] pci 0001:00:07.0: PCI bridge to [bus 02] [ 0.207862] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.207867] pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.207934] pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000 [ 0.207945] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.208061] pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310 [ 0.208075] pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff] [ 0.208129] pci 0001:01:0b.0: supports D1 D2 [ 0.208133] pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208223] pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310 [ 0.208238] pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.208301] pci 0001:01:0b.1: supports D1 D2 [ 0.208304] pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208394] pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.208409] pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff] [ 0.208464] pci 0001:01:0b.2: supports D1 D2 [ 0.208467] pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208554] pci 0001:00:08.0: PCI bridge to [bus 01] [ 0.208563] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.208568] pci 0001:00:08.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.208674] pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f [ 0.208685] pci 0001:03:0c.0: reg 0x10: [io 0x811000-0x811007] [ 0.208693] pci 0001:03:0c.0: reg 0x14: [io 0x811000-0x811003] [ 0.208700] pci 0001:03:0c.0: reg 0x18: [io 0x811000-0x811007] [ 0.208708] pci 0001:03:0c.0: reg 0x1c: [io 0x811000-0x811003] [ 0.208715] pci 0001:03:0c.0: reg 0x20: [io 0x811000-0x81100f] [ 0.208722] pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff] [ 0.208813] pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000 [ 0.208822] pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff] [ 0.208930] pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010 [ 0.208943] pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff] [ 0.208994] pci 0001:03:0e.0: supports D1 D2 [ 0.208997] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.209082] pci 0001:00:09.0: PCI bridge to [bus 03] [ 0.209090] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.209095] pci 0001:00:09.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.209157] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 09 [ 0.209249] PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff] [ 0.209266] pci 0000:00:0b.0: BAR 15: assigned [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.209270] pci 0000:00:0b.0: PCI bridge to [bus 0a] [ 0.209274] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff] [ 0.209279] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xafffffff] [ 0.209283] pci 0000:00:0b.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.209290] pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff] [ 0.209293] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.209296] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff] [ 0.209299] pci_bus 0000:0a: resource 0 [io 0x10000-0x1ffff] [ 0.209302] pci_bus 0000:0a: resource 1 [mem 0x90000000-0xafffffff] [ 0.209305] pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.209345] pci 0001:00:01.0: PCI bridge to [bus 04] [ 0.209350] pci 0001:00:02.0: PCI bridge to [bus 05] [ 0.209355] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.209359] pci 0001:00:03.0: PCI bridge to [bus 06] [ 0.209365] pci 0001:00:04.0: PCI bridge to [bus 07] [ 0.209371] pci 0001:00:05.0: PCI bridge to [bus 08] [ 0.209377] pci 0001:00:06.0: PCI bridge to [bus 09] [ 0.209383] pci 0001:00:07.0: PCI bridge to [bus 02] [ 0.209387] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.209392] pci 0001:00:08.0: PCI bridge to [bus 01] [ 0.209396] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.209401] pci 0001:00:09.0: PCI bridge to [bus 03] [ 0.209405] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.209411] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff] [ 0.209413] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff] [ 0.209416] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff] [ 0.209419] pci_bus 0001:00: resource 7 [mem 0xb0000000-0xefffffff] [ 0.209422] pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff] [ 0.209426] pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff] [ 0.209429] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff] [ 0.209432] pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff] [ 0.209434] PCI: Probing PCI hardware done [ 0.217351] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none [ 0.217373] vgaarb: loaded [ 0.217375] vgaarb: bridge control possible 0000:0a:00.0 [ 0.217857] SCSI subsystem initialized [ 0.217944] libata version 3.00 loaded. [ 0.218032] usbcore: registered new interface driver usbfs [ 0.218050] usbcore: registered new interface driver hub [ 0.218078] usbcore: registered new device driver usb [ 0.218630] NetLabel: Initializing [ 0.218633] NetLabel: domain hash size = 128 [ 0.218635] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218653] NetLabel: unlabeled traffic allowed by default [ 0.218788] Switched to clocksource timebase [ 0.236630] AppArmor: AppArmor Filesystem Enabled [ 0.240943] NET: Registered protocol family 2 [ 0.241348] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.241863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.243120] TCP: Hash tables configured (established 65536 bind 65536) [ 0.243183] TCP: reno registered [ 0.243215] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.243332] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.243548] NET: Registered protocol family 1 [ 0.243588] PCI: CLS mismatch (32 != 64), using 128 bytes [ 0.243606] pci 0001:00:03.0: Found enabled HT MSI Mapping [ 0.243614] pci 0001:00:04.0: Found enabled HT MSI Mapping [ 0.243622] pci 0001:00:05.0: Found enabled HT MSI Mapping [ 0.243630] pci 0001:00:06.0: Found enabled HT MSI Mapping [ 0.243659] pci 0001:01:0b.0: enabling device (0000 -> 0002) [ 0.298831] pci 0001:01:0b.1: enabling device (0000 -> 0002) [ 0.354803] pci 0001:01:0b.2: enabling device (0004 -> 0006) [ 0.354939] Trying to unpack rootfs image as initramfs... [ 1.120407] Freeing initrd memory: 32108K (c000000002700000 - c00000000465b000) [ 1.127279] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 1.127354] Initialise system trusted keyring [ 1.127393] audit: initializing netlink subsys (disabled) [ 1.127438] audit: type=2000 audit(1432405340.115:1): initialized [ 1.127918] HugeTLB registered 16 MB page size, pre-allocated 0 pages [ 1.131128] zpool: loaded [ 1.131131] zbud: loaded [ 1.131440] VFS: Disk quotas dquot_6.5.2 [ 1.131513] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.132545] fuse init (API version 7.23) [ 1.132830] Key type big_key registered [ 1.133415] Key type asymmetric registered [ 1.133420] Asymmetric key parser 'x509' registered [ 1.133505] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.133570] io scheduler noop registered [ 1.133575] io scheduler deadline registered (default) [ 1.133642] io scheduler cfq registered [ 1.133933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.133947] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.134077] Using unsupported 2560x1080 NVDA,Display-A at 90020000, depth=8, pitch=2560 [ 1.181712] Console: switching to colour frame buffer device 320x67 [ 1.228704] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0 [ 1.229292] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.231678] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 1.231825] Linux agpgart interface v0.103 [ 1.234187] brd: module loaded [ 1.235438] loop: module loaded [ 1.235695] MacIO PCI driver attached to Shasta chipset [ 1.236166] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 1.236372] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 24, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 1.236738] sata_svw 0001:03:0c.0: version 2.3 [ 1.236791] sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu [ 1.237648] scsi host0: sata_svw [ 1.237874] scsi host1: sata_svw [ 1.238070] scsi host2: sata_svw [ 1.238268] scsi host3: sata_svw [ 1.238347] ata1: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18 [ 1.238350] ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18 [ 1.238354] ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18 [ 1.238358] ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18 [ 1.238413] pata-pci-macio 0001:03:0d.0: enabling device (0000 -> 0002) [ 1.250800] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple bus ID 3 [ 1.251193] scsi host4: pata_macio [ 1.251277] ata5: PATA max UDMA/133 irq 38 [ 1.251433] libphy: Fixed MDIO Bus: probed [ 1.251437] tun: Universal TUN/TAP device driver, 1.6 [ 1.251439] tun: (C) 1999-2004 Max Krasnyansky [ 1.251650] PPP generic driver version 2.4.2 [ 1.251800] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.251828] ehci-pci: EHCI PCI platform driver [ 1.251901] ehci-pci 0001:01:0b.2: EHCI Host Controller [ 1.251910] ehci-pci 0001:01:0b.2: new USB bus registered, assigned bus number 1 [ 1.251983] ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000 [ 1.262805] ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00 [ 1.262896] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.262899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.262902] usb usb1: Product: EHCI Host Controller [ 1.262905] usb usb1: Manufacturer: Linux 3.19.0-18-powerpc64-smp ehci_hcd [ 1.262908] usb usb1: SerialNumber: 0001:01:0b.2 [ 1.263106] hub 1-0:1.0: USB hub found [ 1.263119] hub 1-0:1.0: 5 ports detected [ 1.263453] ehci-platform: EHCI generic platform driver [ 1.263482] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.263508] ohci-pci: OHCI PCI platform driver [ 1.263543] ohci-pci 0001:01:0b.0: OHCI PCI host controller [ 1.263553] ohci-pci 0001:01:0b.0: new USB bus registered, assigned bus number 2 [ 1.263590] ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000 [ 1.338681] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.338684] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.338687] usb usb2: Product: OHCI PCI host controller [ 1.338690] usb usb2: Manufacturer: Linux 3.19.0-18-powerpc64-smp ohci_hcd [ 1.338693] usb usb2: SerialNumber: 0001:01:0b.0 [ 1.338886] hub 2-0:1.0: USB hub found [ 1.338899] hub 2-0:1.0: 3 ports detected [ 1.339128] ohci-pci 0001:01:0b.1: OHCI PCI host controller [ 1.339136] ohci-pci 0001:01:0b.1: new USB bus registered, assigned bus number 3 [ 1.339183] ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000 [ 1.414664] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.414667] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.414670] usb usb3: Product: OHCI PCI host controller [ 1.414673] usb usb3: Manufacturer: Linux 3.19.0-18-powerpc64-smp ohci_hcd [ 1.414676] usb usb3: SerialNumber: 0001:01:0b.1 [ 1.414867] hub 3-0:1.0: USB hub found [ 1.414880] hub 3-0:1.0: 2 ports detected [ 1.415066] ohci-platform: OHCI generic platform driver [ 1.415094] uhci_hcd: USB Universal Host Controller Interface driver [ 1.415438] mousedev: PS/2 mouse device common for all mice [ 1.415517] i2c /dev entries driver [ 1.415659] PowerMac i2c bus smu 14 registered [ 1.415763] PowerMac i2c bus smu 11 registered [ 1.416056] PowerMac i2c bus mac-io 0 registered [ 1.416216] PowerMac i2c bus mac-io 0 registered [ 1.416434] PowerMac i2c bus u4 1 registered [ 1.416886] device-mapper: uevent: version 1.0.3 [ 1.417074] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 1.419174] ata5.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, Q002, max UDMA/66 [ 1.430812] Registering G5 CPU frequency driver [ 1.430815] Frequency method: SCOM, Voltage method: GPIO [ 1.430817] Low: 1250 Mhz, High: 2500 Mhz, Cur: 2500 MHz [ 1.430966] ledtrig-cpu: registered to indicate activity on CPUs [ 1.431129] TCP: cubic registered [ 1.431359] NET: Registered protocol family 10 [ 1.431768] NET: Registered protocol family 17 [ 1.431790] Key type dns_resolver registered [ 1.431855] PM: Registered nosave memory: [mem 0x7f000000-0x7fffffff] [ 1.432106] Loading compiled-in X.509 certificates [ 1.433693] Loaded X.509 cert 'Magrathea: Glacier signing key: 587a0af47fc3b1cc5ef7cbcbcd295392974e6e37' [ 1.433723] registered taskstats version 1 [ 1.435205] ata5.00: configured for UDMA/66 [ 1.440815] Key type trusted registered [ 1.451127] Key type encrypted registered [ 1.451135] AppArmor: AppArmor sha1 policy hashing enabled [ 1.451140] ima: No TPM chip found, activating TPM-bypass! [ 1.451184] evm: HMAC attrs: 0x1 [ 1.451540] /build/buildd/linux-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.452036] PM: Hibernation image not present or could not be loaded. [ 1.558836] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.573567] ata1.00: ATA-8: WDC WD3000HLFS-01MZUV0, 04.05G04, max UDMA/133 [ 1.573571] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.574809] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.579747] ata1.00: configured for UDMA/133 [ 1.579875] scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 5G04 PQ: 0 ANSI: 5 [ 1.580244] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 1.580321] sd 0:0:0:0: [sda] Write Protect is off [ 1.580325] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.580357] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.580733] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.590870] sda: [mac] sda1 sda2 sda3 sda4 [ 1.591381] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.715758] usb 1-3: New USB device found, idVendor=05ac, idProduct=1006 [ 1.715762] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.715765] usb 1-3: Product: Keyboard Hub [ 1.715767] usb 1-3: Manufacturer: Apple, Inc. [ 1.715770] usb 1-3: SerialNumber: 000000000000 [ 1.716064] hub 1-3:1.0: USB hub found [ 1.716134] hub 1-3:1.0: 3 ports detected [ 1.898826] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.908054] ata2.00: ATA-7: Maxtor 6V250F0, VA111630, max UDMA/133 [ 1.908057] ata2.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.924070] ata2.00: configured for UDMA/133 [ 1.924196] scsi 1:0:0:0: Direct-Access ATA Maxtor 6V250F0 1630 PQ: 0 ANSI: 5 [ 1.924533] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.924576] sd 1:0:0:0: [sdb] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 1.924681] sd 1:0:0:0: [sdb] Write Protect is off [ 1.924685] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.924718] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.948465] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 [ 1.949058] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.987011] usb 1-3.2: new low-speed USB device number 3 using ehci-pci [ 2.085628] usb 1-3.2: New USB device found, idVendor=05ac, idProduct=0250 [ 2.085631] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.085634] usb 1-3.2: Product: Apple Keyboard [ 2.085637] usb 1-3.2: Manufacturer: Apple Inc. [ 2.159006] usb 1-3.3: new low-speed USB device number 4 using ehci-pci [ 2.256874] usb 1-3.3: New USB device found, idVendor=05ac, idProduct=0304 [ 2.256877] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.256879] usb 1-3.3: Product: Apple Optical USB Mouse [ 2.256882] usb 1-3.3: Manufacturer: Mitsumi Electric [ 2.950793] ata3: failed to resume link (SControl 0) [ 2.950821] ata3: SATA link down (SStatus 0 SControl 0) [ 3.978792] ata4: failed to resume link (SControl 0) [ 3.978817] ata4: SATA link down (SStatus 0 SControl 0) [ 3.982296] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B Q002 PQ: 0 ANSI: 5 [ 3.982310] ata5.00: K2/Shasta alignment limits applied [ 3.996911] sr 4:0:0:0: [sr0] scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray [ 3.996914] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.997094] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.997266] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 4.003570] Freeing unused kernel memory: 8196K (c000000000e48000 - c000000001649000) [ 4.041354] random: systemd-udevd urandom read with 35 bits of entropy available [ 4.081781] pps_core: LinuxPPS API ver. 1 registered [ 4.081786] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.084163] PTP clock support registered [ 4.096068] tg3.c:v3.137 (May 11, 2014) [ 4.110940] tg3 0001:05:04.0: Using 32-bit DMA via iommu [ 4.111432] tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:16:cb:39:73:da [ 4.111437] tg3 0001:05:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 4.111440] tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 4.111443] tg3 0001:05:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit] [ 4.111626] [drm] Initialized drm 1.1.0 20060810 [ 4.112554] hidraw: raw HID events driver (C) Jiri Kosina [ 4.115960] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002) [ 4.130162] usbcore: registered new interface driver usbhid [ 4.130167] usbhid: USB HID core driver [ 4.131519] tg3 0001:05:04.1: Using 32-bit DMA via iommu [ 4.131997] tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:16:cb:39:73:db [ 4.132002] tg3 0001:05:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 4.132005] tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 4.132008] tg3 0001:05:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit] [ 4.170870] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 4.189821] checking generic (90020000 2a3000) vs hw (90000000 10000000) [ 4.189826] fb: switching to nouveaufb from OFfb NVDA,Displ [ 4.189867] Console: switching to colour dummy device 80x25 [ 4.190930] nouveau [ DEVICE][0000:0a:00.0] BOOT0 : 0x043100a4 [ 4.190934] nouveau [ DEVICE][0000:0a:00.0] Chipset: NV43 (NV43) [ 4.190936] nouveau [ DEVICE][0000:0a:00.0] Family : NV40 [ 4.191189] nouveau 0000:0a:00.0: Invalid ROM contents [ 4.191204] nouveau ![ VBIOS][0000:0a:00.0] unable to locate usable image [ 4.191209] nouveau E[ DEVICE][0000:0a:00.0] failed to create 0x10000001, -22 [ 4.191215] nouveau E[ DRM] failed to create 0x00000080, -22 [ 4.191652] nouveau: probe of 0000:0a:00.0 failed with error -22 [ 4.250472] input: Apple Inc. Apple Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-3/1-3.2/1-3.2:1.0/0003:05AC:0250.0001/input/input0 [ 4.255945] windfarm: initializing for dual-core desktop G5 [ 4.303119] apple 0003:05AC:0250.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0001:01:0b.2-3.2/input0 [ 4.304507] input: Apple Inc. Apple Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-3/1-3.2/1-3.2:1.1/0003:05AC:0250.0002/input/input1 [ 4.359162] apple 0003:05AC:0250.0002: input,hidraw1: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0001:01:0b.2-3.2/input1 [ 4.359494] input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-3/1-3.3/1-3.3:1.0/0003:05AC:0304.0003/input/input2 [ 4.360239] apple 0003:05AC:0304.0003: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0001:01:0b.2-3.3/input0 [ 4.541691] windfarm: CPUs control loops started. [ 4.610629] random: nonblocking pool is initialized [ 4.670997] firewire_core 0001:03:0e.0: created device fw0: GUID 001451fffe3e3152, S800 [ 4.671013] firewire_core 0001:03:0e.0: phy config: new root=ffc1, gap_count=5 [ 5.399884] sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 5.994101] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 6.049657] sat 0 partition c4: c4 4 1 7f a0 12 20 5f ff 55 7b 12 7b 12 0 0 [ 6.915299] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 7.292398] systemd[1]: Inserted module 'autofs4' [ 7.400539] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 7.400676] systemd[1]: Detected architecture ppc64. [ 7.429291] systemd[1]: Set hostname to . [ 7.564585] sat 0 partition c5: c5 4 1 7f a0 12 20 5f ff 55 9a 13 7b 12 0 0 [ 8.425555] sat 1 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 8.879945] systemd[1]: Reached target Remote File Systems (Pre). [ 8.879968] systemd[1]: Starting Remote File Systems (Pre). [ 8.880150] systemd[1]: Created slice Root Slice. [ 8.880166] systemd[1]: Starting Root Slice. [ 8.880342] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.880357] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 8.880521] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.880537] systemd[1]: Starting fsck to fsckd communication Socket. [ 8.880688] systemd[1]: Listening on Delayed Shutdown Socket. [ 8.880703] systemd[1]: Starting Delayed Shutdown Socket. [ 8.880863] systemd[1]: Listening on udev Kernel Socket. [ 8.880878] systemd[1]: Starting udev Kernel Socket. [ 8.881036] systemd[1]: Listening on udev Control Socket. [ 8.881051] systemd[1]: Starting udev Control Socket. [ 8.881224] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.881240] systemd[1]: Starting Journal Socket (/dev/log). [ 8.881402] systemd[1]: Listening on LVM2 metadata daemon socket. [ 8.881418] systemd[1]: Starting LVM2 metadata daemon socket. [ 8.892760] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 8.892780] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 8.893006] systemd[1]: Listening on Journal Socket. [ 8.893035] systemd[1]: Starting Journal Socket. [ 8.893219] systemd[1]: Listening on Journal Audit Socket. [ 8.893234] systemd[1]: Starting Journal Audit Socket. [ 8.893796] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.893820] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 8.894138] systemd[1]: Created slice User and Session Slice. [ 8.894155] systemd[1]: Starting User and Session Slice. [ 8.894270] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.894286] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 8.894416] systemd[1]: Reached target Encrypted Volumes. [ 8.894431] systemd[1]: Starting Encrypted Volumes. [ 8.894745] systemd[1]: Created slice System Slice. [ 8.894778] systemd[1]: Starting System Slice. [ 8.896080] systemd[1]: Mounting Huge Pages File System... [ 8.896714] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 8.896742] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 8.898154] systemd[1]: Starting Increase datagram queue length... [ 8.899643] systemd[1]: Mounting POSIX Message Queue File System... [ 8.901147] systemd[1]: Starting Nameserver information manager... [ 8.902905] systemd[1]: Started Braille Device Support. [ 8.904678] systemd[1]: Starting Braille Device Support... [ 8.906290] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.907887] systemd[1]: Mounting Debug File System... [ 8.908498] systemd[1]: Created slice system-getty.slice. [ 8.908523] systemd[1]: Starting system-getty.slice. [ 8.909887] systemd[1]: Starting Setup Virtual Console... [ 8.911469] systemd[1]: Starting udev Coldplug all Devices... [ 8.913053] systemd[1]: Starting Uncomplicated firewall... [ 8.914601] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 9.075394] sat 1 partition c4: c4 4 1 7f a0 12 20 5f ff 55 a 13 7b 12 0 0 [ 9.231107] systemd[1]: Starting Load Kernel Modules... [ 9.231328] systemd[1]: Reached target Slices. [ 9.231350] systemd[1]: Starting Slices. [ 9.339096] systemd[1]: Started Set Up Additional Binary Formats. [ 9.341065] systemd[1]: Started Read required files in advance. [ 9.341596] systemd[1]: Starting Read required files in advance... [ 9.342144] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 9.342166] systemd[1]: Starting system-serial\x2dgetty.slice. [ 9.344401] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 9.345484] systemd[1]: Started Setup Virtual Console. [ 9.347606] systemd[1]: Started Uncomplicated firewall. [ 9.369080] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.390176] systemd[1]: Started udev Coldplug all Devices. [ 9.392265] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 9.475076] systemd[1]: Mounted POSIX Message Queue File System. [ 9.477500] systemd[1]: Mounted Huge Pages File System. [ 9.478741] systemd[1]: Mounted Debug File System. [ 9.479764] systemd[1]: Started Increase datagram queue length. [ 9.506953] systemd[1]: Listening on Syslog Socket. [ 9.506980] systemd[1]: Starting Syslog Socket. [ 9.508414] systemd[1]: Starting Journal Service... [ 9.567406] systemd[1]: Started Nameserver information manager. [ 9.940667] sat 1 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 10.231830] lp: driver loaded but no devices found [ 10.277182] ppdev: user-space parallel port driver [ 10.465850] systemd[1]: Started Journal Service. [ 10.590486] sat 1 partition c5: c5 4 1 7f a0 12 20 5f ff 55 7b 12 7b 12 0 0 [ 11.221706] windfarm: Backside control loop started. [ 11.274455] windfarm: Slots control loop started. [ 11.362018] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. [ 11.379778] windfarm: Drive bay control loop started. [ 14.345626] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 14.362151] snd-aoa-codec-onyx: created and attached onyx instance [ 14.362905] snd-aoa-codec-onyx: created and attached onyx instance [ 14.531740] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.546236] Adding 9961468k swap on /dev/mapper/powermac--vg-swap_1. Priority:-1 extents:1 across:9961468k FS [ 19.043777] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 19.130765] systemd-journald[303]: Received request to flush runtime journal from PID 1 [ 19.221980] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem [ 19.227353] EXT4-fs (sdb3): mounted filesystem without journal. Opts: (null) [ 20.083519] audit: type=1400 audit(1432405359.071:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=526 comm="apparmor_parser" [ 20.083535] audit: type=1400 audit(1432405359.071:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=526 comm="apparmor_parser" [ 20.088095] audit: type=1400 audit(1432405359.075:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser" [ 20.088111] audit: type=1400 audit(1432405359.075:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser" [ 20.088121] audit: type=1400 audit(1432405359.075:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=526 comm="apparmor_parser" [ 20.088131] audit: type=1400 audit(1432405359.075:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser" [ 20.096489] audit: type=1400 audit(1432405359.083:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=526 comm="apparmor_parser" [ 20.096509] audit: type=1400 audit(1432405359.083:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=526 comm="apparmor_parser" [ 20.096520] audit: type=1400 audit(1432405359.083:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=526 comm="apparmor_parser" [ 20.096530] audit: type=1400 audit(1432405359.083:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=526 comm="apparmor_parser" [ 21.259750] u3msi: allocated virq 0x19 (hw 0x8) addr 0xfee00000 [ 21.300076] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.123047] tg3 0001:05:04.0 eth0: Link is up at 1000 Mbps, full duplex [ 24.123061] tg3 0001:05:04.0 eth0: Flow control is on for TX and on for RX [ 24.123089] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.379369] cfg80211: Calling CRDA to update world regulatory domain [ 24.670601] cfg80211: World regulatory domain updated: [ 24.670608] cfg80211: DFS Master region: unset [ 24.670610] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 24.670614] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.670617] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.670620] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.670623] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.670626] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 24.938712] u3msi: allocated virq 0x1a (hw 0x9) addr 0xfee00000