I am using a bcm4318 wireless card on an acer 3002 lci laptop. the available networks are shown, and when I select one, system ask for encryption key but never connect. at the access point the status for my card is authorized.
dmesg
[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001befa000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001befa000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7fd0
[ 0.000000] Entering add_active_range(0, 0, 114416) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114416
[ 0.000000] HighMem 114416 -> 114416
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114416
[ 0.000000] On node 0 totalpages: 114416
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 861 pages used for memmap
[ 0.000000] Normal zone: 109459 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7F60, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1BEF61D6, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1BEF9E5F, 0074 (r1 SiS 755F 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 1BEF620A, 3C55 (r1 PTLTD 755 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1BEFAFC0, 0040
[ 0.000000] ACPI: SSDT 1BEF9ED3, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 1BEF9F88, 0050 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 1BEF9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000)
[ 0.000000] Built 1 zonelists. Total pages: 113523
[ 0.000000] Kernel command line: root=UUID=ee194b66-5ddb-408c-81bc-f0e0aed6bee6 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1600.168 MHz processor.
[ 17.286417] Console: colour VGA+ 80x25
[ 17.286647] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.286930] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.296992] Memory: 442124k/457664k available (2017k kernel code, 14924k reserved, 918k data, 364k init, 0k highmem)
[ 17.297004] virtual kernel memory layout:
[ 17.297005] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 17.297007] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.297009] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 17.297010] lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB)
[ 17.297012] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 17.297013] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB)
[ 17.297015] .text : 0xc0100000 - 0xc02f8456 (2017 kB)
[ 17.297018] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.297057] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 17.376958] Calibrating delay using timer specific routine.. 3201.83 BogoMIPS (lpj=6403664)
[ 17.376985] Security Framework v1.0.0 initialized
[ 17.376991] SELinux: Disabled at boot.
[ 17.377006] Mount-cache hash table entries: 512
[ 17.377126] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[ 17.377136] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.377139] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.377142] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000000 00000000 00000001
[ 17.377152] Compat vDSO mapped to ffffe000.
[ 17.377163] Checking 'hlt' instruction... OK.
[ 17.393067] SMP alternatives: switching to UP code
[ 17.393260] Freeing SMP alternatives: 11k freed
[ 17.393609] Early unpacking initramfs... done
[ 17.751661] ACPI: Core revision 20070126
[ 17.751735] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.755233] CPU0: AMD Mobile AMD Sempron(tm) Processor 2800+ stepping 00
[ 17.755253] Total of 1 processors activated (3201.83 BogoMIPS).
[ 17.755409] ENABLING IO-APIC IRQs
[ 17.755608] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.900247] Brought up 1 CPUs
[ 17.900381] Booting paravirtualized kernel on bare hardware
[ 17.900446] Time: 11:13:57 Date: 08/27/107
[ 17.900473] NET: Registered protocol family 16
[ 17.900563] EISA bus registered
[ 17.900575] ACPI: bus type pci registered
[ 17.900690] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
[ 17.900693] PCI: Using configuration type 1
[ 17.900695] Setting up standard PCI resources
[ 17.902269] ACPI: EC: Look up EC in DSDT
[ 17.902378] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 17.917075] ACPI: Interpreter enabled
[ 17.917078] ACPI: (supports S0 S3 S4 S5)
[ 17.917090] ACPI: Using IOAPIC for interrupt routing
[ 17.919747] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 17.919789] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.919796] PCI: Probing PCI hardware (bus 00)
[ 17.919911] Enabling SiS 96x SMBus.
[ 17.920355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.927027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[ 17.927120] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
[ 17.927207] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
[ 17.927292] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 17.927391] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[ 17.927477] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 17.927559] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 17.927642] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[ 17.927732] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.927747] pnp: PnP ACPI init
[ 17.927757] ACPI: bus type pnp registered
[ 17.929366] pnp: PnP ACPI: found 8 devices
[ 17.929368] ACPI: ACPI bus type pnp unregistered
[ 17.929373] PnPBIOS: Disabled by ACPI PNP
[ 17.929428] PCI: Using ACPI for IRQ routing
[ 17.929432] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.931481] NET: Registered protocol family 8
[ 17.931483] NET: Registered protocol family 20
[ 17.931551] pnp: 00:04: ioport range 0x8000-0x807f has been reserved
[ 17.931554] pnp: 00:04: ioport range 0x8080-0x80ff has been reserved
[ 17.931558] pnp: 00:04: ioport range 0x8100-0x811f has been reserved
[ 17.931561] pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 17.931565] pnp: 00:04: iomem range 0xfec00000-0xfecfffff has been reserved
[ 17.931568] pnp: 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 17.931572] pnp: 00:04: iomem range 0xfee00000-0xfeefffff has been reserved
[ 17.931576] pnp: 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 17.932163] Time: tsc clocksource has been installed.
[ 17.961821] PCI: Bridge: 0000:00:01.0
[ 17.961824] IO window: a000-afff
[ 17.961828] MEM window: e2100000-e21fffff
[ 17.961832] PREFETCH window: e8000000-efffffff
[ 17.961836] PCI: Bus 2, cardbus bridge: 0000:00:06.0
[ 17.961839] IO window: 00002400-000024ff
[ 17.961842] IO window: 00002800-000028ff
[ 17.961846] PREFETCH window: 30000000-33ffffff
[ 17.961850] MEM window: 34000000-37ffffff
[ 17.961865] PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
[ 17.961877] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 17.961896] NET: Registered protocol family 2
[ 18.000107] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 18.000168] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 18.000379] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.000545] TCP: Hash tables configured (established 16384 bind 16384)
[ 18.000548] TCP reno registered
[ 18.012195] checking if image is initramfs... it is
[ 18.463392] Switched to high resolution mode on CPU 0
[ 18.719602] Freeing initrd memory: 7061k freed
[ 18.719742] Simple Boot Flag at 0x38 set to 0x1
[ 18.720077] audit: initializing netlink socket (disabled)
[ 18.720092] audit(1190891637.032:1): initialized
[ 18.721869] VFS: Disk quotas dquot_6.5.1
[ 18.721926] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.722031] io scheduler noop registered
[ 18.722034] io scheduler anticipatory registered
[ 18.722036] io scheduler deadline registered
[ 18.722051] io scheduler cfq registered (default)
[ 19.140602] Boot video device is 0000:01:00.0
[ 19.140796] isapnp: Scanning for PnP cards...
[ 19.493648] isapnp: No Plug & Play device found
[ 19.517428] Real Time Clock Driver v1.12ac
[ 19.517514] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.518155] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
[ 19.518162] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 19.518690] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.518910] input: Macintosh mouse button emulation as /class/input/input0
[ 19.518980] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 19.521669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.521675] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.521862] mice: PS/2 mouse device common for all mice
[ 19.521971] EISA: Probing bus 0 at eisa.0
[ 19.521979] Cannot allocate resource for EISA slot 1
[ 19.521982] Cannot allocate resource for EISA slot 2
[ 19.522002] Cannot allocate resource for EISA slot 8
[ 19.522004] EISA: Detected 0 cards.
[ 19.522112] TCP cubic registered
[ 19.522127] NET: Registered protocol family 1
[ 19.522153] Using IPI No-Shortcut mode
[ 19.522316] Magic number: 7:381:227
[ 19.522375] hash matches device ttyre
[ 19.522481] hash matches device PNP0200:00
[ 19.522817] Freeing unused kernel memory: 364k freed
[ 19.565745] input: AT Translated Set 2 keyboard as /class/input/input1
[ 20.738234] AppArmor: AppArmor initialized<5>audit(1190891639.032:2): type=1505 info="AppArmor initialized" pid=1177
[ 20.746807] fuse init (API version 7.8)
[ 20.752831] Failure registering capabilities with primary security module.
[ 20.772414] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 20.772421] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 20.775701] ACPI: Thermal Zone [THRM] (57 C)
[ 21.337542] SCSI subsystem initialized
[ 21.342476] libata version 2.21 loaded.
[ 21.346174] pata_sis 0000:00:02.5: version 0.5.1
[ 21.346207] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18
[ 21.346327] scsi0 : pata_sis
[ 21.346377] scsi1 : pata_sis
[ 21.346453] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012000 irq 14
[ 21.346457] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012008 irq 15
[ 21.397056] usbcore: registered new interface driver usbfs
[ 21.397084] usbcore: registered new interface driver hub
[ 21.397106] usbcore: registered new device driver usb
[ 21.438915] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 21.442061] sis900.c: v1.08.10 Apr. 2 2006
[ 4.264000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.268000] Time: acpi_pm clocksource has been installed.
[ 4.336000] ata1.00: ATA-7: SAMSUNG MP0402H, UC100-14, max UDMA/100
[ 4.336000] ata1.00: 78242976 sectors, multi 16: LBA48
[ 4.344000] ata1.00: configured for UDMA/100
[ 4.820000] ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.00, max UDMA/33
[ 4.992000] ata2.00: configured for UDMA/33
[ 4.992000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0402H UC10 PQ: 0 ANSI: 5
[ 4.992000] scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.00 PQ: 0 ANSI: 5
[ 4.992000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 4.992000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 4.992000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 4.992000] ohci_hcd 0000:00:03.0: irq 19, io mem 0xe2002000
[ 5.008000] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 5.008000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.008000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.008000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.008000] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 5.008000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.008000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.008000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.008000] sda:<6>usb usb1: configuration #1 chosen from 1 choice
[ 5.048000] hub 1-0:1.0: USB hub found
[ 5.048000] hub 1-0:1.0: 3 ports detected
[ 5.152000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 5.152000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 5.152000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 5.152000] ohci_hcd 0000:00:03.1: irq 20, io mem 0xe2003000
[ 5.208000] usb usb2: configuration #1 chosen from 1 choice
[ 5.208000] hub 2-0:1.0: USB hub found
[ 5.208000] hub 2-0:1.0: 3 ports detected
[ 5.312000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 5.316000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
[ 5.320000] 0000:00:04.0: Using transceiver found at address 13 as default
[ 5.324000] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 16, 00:c0:9f:73:d7:dc.
[ 5.324000] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 21
[ 5.324000] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 5.324000] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 5.324000] PCI: cache line size of 64 is not supported by device 0000:00:03.2
[ 5.324000] ehci_hcd 0000:00:03.2: irq 21, io mem 0xe2004000
[ 5.324000] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.324000] usb usb3: configuration #1 chosen from 1 choice
[ 5.324000] hub 3-0:1.0: USB hub found
[ 5.324000] hub 3-0:1.0: 6 ports detected
[ 6.000000] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 6.184000] sda1 sda2 sda3 sda4
[ 6.204000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.208000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.212000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.212000] usb 1-2: configuration #1 chosen from 1 choice
[ 6.224000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.224000] Uniform CD-ROM driver Revision: 3.20
[ 6.224000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.252000] usbcore: registered new interface driver hiddev
[ 6.260000] input: PS/2+USB Mouse as /class/input/input2
[ 6.260000] input: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:00:03.0-2
[ 6.260000] usbcore: registered new interface driver usbhid
[ 6.260000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 6.596000] Attempting manual resume
[ 6.596000] swsusp: Resume From Partition 8:2
[ 6.596000] PM: Checking swsusp image.
[ 6.596000] PM: Resume from disk failed.
[ 6.636000] kjournald starting. Commit interval 5 seconds
[ 6.636000] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.712000] Linux agpgart interface v0.102 (c) Dave Jones
[ 18.772000] agpgart: Detected SiS chipset - id:1888
[ 18.772000] agpgart: AGP aperture is 4M @ 0xe0000000
[ 19.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.004000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.036000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 19.172000] Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
[ 19.172000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 19.172000] Yenta: Routing CardBus interrupts to PCI
[ 19.172000] Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
[ 19.408000] Yenta: ISA IRQ mask 0x06f8, PCI irq 16
[ 19.408000] Socket status: 30000006
[ 19.552000] ieee80211_crypt: registered algorithm 'NULL'
[ 19.648000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.648000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 19.708000] input: PC Speaker as /class/input/input3
[ 19.852000] bcm43xx driver
[ 19.852000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 20.164000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17
[ 20.288000] cs: IO port probe 0x100-0x3af: clean.
[ 20.292000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[ 20.292000] cs: IO port probe 0x820-0x8ff: clean.
[ 20.292000] cs: IO port probe 0xc00-0xcf7: clean.
[ 20.292000] cs: IO port probe 0xa00-0xaff: clean.
[ 20.456000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[ 20.492000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 20.992000] intel8x0_measure_ac97_clock: measured 55428 usecs
[ 20.992000] intel8x0: clocking to 48000
[ 22.172000] lp: driver loaded but no devices found
[ 22.244000] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
[ 22.732000] EXT3 FS on sda3, internal journal
[ 23.456000] kjournald starting. Commit interval 5 seconds
[ 23.456000] EXT3 FS on sda4, internal journal
[ 23.456000] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.588000] ACPI: Battery Slot [BAT1] (battery present)
[ 24.824000] ACPI: AC Adapter [ACAD] (on-line)
[ 24.840000] No dock devices found.
[ 25.028000] input: Power Button (FF) as /class/input/input5
[ 25.036000] ACPI: Power Button (FF) [PWRF]
[ 25.076000] input: Lid Switch as /class/input/input6
[ 25.080000] ACPI: Lid Switch [LID]
[ 25.120000] input: Power Button (CM) as /class/input/input7
[ 25.124000] ACPI: Power Button (CM) [PWRB]
[ 25.160000] input: Sleep Button (CM) as /class/input/input8
[ 25.168000] ACPI: Sleep Button (CM) [SLPB]
[ 25.448000] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2800+ processors (version 2.00.00)
[ 25.448000] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x8
[ 25.448000] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x13
[ 26.896000] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
[ 27.480000] eth0: Media Link Off
[ 27.776000] ppdev: user-space parallel port driver
[ 29.004000] audit(1190902465.726:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4724 profile="/usr/sbin/cupsd"
[ 29.164000] apm: BIOS not found.
[ 29.436000] Failure registering capabilities with primary security module.
[ 31.060000] Clocksource tsc unstable (delta = -192011206 ns)
[ 52.188000] NET: Registered protocol family 10
[ 52.188000] lo: Disabled Privacy Extensions
[ 52.188000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 52.188000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 135.408000] NET: Registered protocol family 17
[ 135.900000] ieee80211_crypt: registered algorithm 'WEP'
[ 136.024000] SoftMAC: Open Authentication completed with 00:15:e9:2a:a8:56
[ 136.068000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 146.140000] eth1: no IPv6 routers present
[ 218.480000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 222.816000] NETDEV WATCHDOG: eth0: transmit timed out
[ 222.816000] eth0: Transmit timeout, status 00000004 00000000
[ 223.480000] eth0: Media Link On 100mbps full-duplex
[ 228.636000] eth0: no IPv6 routers present
[ 247.808000] eth0: no IPv6 routers present
[ 361.308000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1061.804000] APIC error on CPU0: 00(40)
I have the same problem with a Dell Latitude D600, bcm4306 card. After fixing the problem in bug 197819 (https:/