[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-47-generic (buildd@lcy01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016 (Ubuntu 4.4.0-47.68-generic 4.4.24) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-47-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash acpi=off vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c2befff] usable [ 0.000000] BIOS-e820: [mem 0x000000009c2bf000-0x000000009cdbefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009cdbf000-0x000000009cfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x89ec0018-0x89ed0057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000089ec0017] usable [ 0.000000] reserve setup_data: [mem 0x0000000089ec0018-0x0000000089ed0057] usable [ 0.000000] reserve setup_data: [mem 0x0000000089ed0058-0x000000009c2befff] usable [ 0.000000] reserve setup_data: [mem 0x000000009c2bf000-0x000000009cdbefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009cdbf000-0x000000009cfbefff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025effffff] usable [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: SMBIOS=0x9cb30000 ESRT=0x9cb35718 ACPI 2.0=0x9cffe014 [ 0.000000] esrt: Reserving ESRT space from 0x000000009cb35718 to 0x000000009cb35750. [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion 13 Notebook PC /2340, BIOS F.35 07/29/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 16GB, type WB [ 0.000000] reg 1, base: 2512MB, range: 16MB, type UC [ 0.000000] reg 2, base: 2528MB, range: 32MB, type UC [ 0.000000] reg 3, base: 2560MB, range: 512MB, type UC [ 0.000000] reg 4, base: 3GB, range: 1GB, type UC [ 0.000000] total RAM covered: 14800M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB [ 0.000000] reg 2, base: 2512MB, range: 16MB, type UC [ 0.000000] reg 3, base: 2528MB, range: 32MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 8GB, type WB [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000080000] 80000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE [ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE [ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE [ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3d960000-0x3fffafff] [ 0.000000] Secure boot enabled [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x25eff9000-0x25effdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000025effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000085fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009c2befff] [ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff] [ 0.000000] On node 0 totalpages: 2077252 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3972 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9931 pages used for memmap [ 0.000000] DMA32 zone: 635584 pages, LIFO batch:31 [ 0.000000] Normal zone: 22464 pages used for memmap [ 0.000000] Normal zone: 1437696 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics stolen memory at 0x9e000000-0x9fffffff [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x89ec0000-0x89ec0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x89ed0000-0x89ed0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9c2bf000-0x9cdbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cdbf000-0x9cfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88025ec00000 s98008 r8192 d28968 u2097152 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2044771 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-47-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash acpi=off vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8011228K/8309008K available (8423K kernel code, 1285K rwdata, 3952K rodata, 1480K init, 1292K bss, 297780K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16640 nr_irqs:32 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.846 MHz processor [ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.69 BogoMIPS (lpj=8779384) [ 0.000045] pid_max: default: 32768 minimum: 301 [ 0.001983] Security Framework initialized [ 0.001986] Yama: becoming mindful. [ 0.002004] AppArmor: AppArmor initialized [ 0.002772] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005118] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006129] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006143] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006433] Initializing cgroup subsys io [ 0.006437] Initializing cgroup subsys memory [ 0.006444] Initializing cgroup subsys devices [ 0.006447] Initializing cgroup subsys freezer [ 0.006449] Initializing cgroup subsys net_cls [ 0.006452] Initializing cgroup subsys perf_event [ 0.006455] Initializing cgroup subsys net_prio [ 0.006459] Initializing cgroup subsys hugetlb [ 0.006461] Initializing cgroup subsys pids [ 0.006491] CPU: Physical Processor ID: 0 [ 0.006492] CPU: Processor Core ID: 0 [ 0.006498] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.006500] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.007818] mce: CPU supports 7 MCE banks [ 0.007839] CPU0: Thermal monitoring enabled (TM1) [ 0.007850] process: using mwait in idle threads [ 0.007854] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.007856] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.017424] Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000) [ 0.020944] ftrace: allocating 32047 entries in 126 pages [ 0.041447] smpboot: Max logical packages: 1 [ 0.041452] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.041453] smpboot: SMP motherboard not detected [ 0.041455] smpboot: SMP disabled [ 0.041475] TSC deadline timer enabled [ 0.041494] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.041523] ... version: 3 [ 0.041524] ... bit width: 48 [ 0.041525] ... generic registers: 4 [ 0.041527] ... value mask: 0000ffffffffffff [ 0.041528] ... max period: 0000ffffffffffff [ 0.041529] ... fixed-purpose events: 3 [ 0.041530] ... event mask: 000000070000000f [ 0.042562] x86: Booted up 1 node, 1 CPUs [ 0.042564] smpboot: Total of 1 processors activated (4389.69 BogoMIPS) [ 0.042647] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.042782] devtmpfs: initialized [ 0.045939] evm: security.selinux [ 0.045941] evm: security.SMACK64 [ 0.045942] evm: security.SMACK64EXEC [ 0.045943] evm: security.SMACK64TRANSMUTE [ 0.045944] evm: security.SMACK64MMAP [ 0.045945] evm: security.ima [ 0.045946] evm: security.capability [ 0.046015] PM: Registering ACPI NVS region [mem 0x9cdbf000-0x9cfbefff] (2097152 bytes) [ 0.046133] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.046223] pinctrl core: initialized pinctrl subsystem [ 0.046354] RTC time: 3:27:47, date: 11/13/16 [ 0.046501] NET: Registered protocol family 16 [ 0.046715] cpuidle: using governor ladder [ 0.046718] cpuidle: using governor menu [ 0.046903] PCI: Using configuration type 1 for base access [ 0.048690] ACPI: Interpreter disabled. [ 0.048788] vgaarb: loaded [ 0.049072] SCSI subsystem initialized [ 0.049103] libata version 3.00 loaded. [ 0.049149] usbcore: registered new interface driver usbfs [ 0.049159] usbcore: registered new interface driver hub [ 0.049167] usbcore: registered new device driver usb [ 0.049365] PCI: Probing PCI hardware [ 0.049367] PCI: root bus 00: using default resources [ 0.049368] PCI: Probing PCI hardware (bus 00) [ 0.049403] PCI host bridge to bus 0000:00 [ 0.049407] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.049409] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff] [ 0.049411] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.049422] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.049516] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.049535] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] [ 0.049543] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.049549] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.049607] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.049609] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.049621] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.049637] pci 0000:00:03.0: reg 0x10: [mem 0xc1310000-0xc1313fff 64bit] [ 0.049727] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.049754] pci 0000:00:14.0: reg 0x10: [mem 0xc1300000-0xc130ffff 64bit] [ 0.049806] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.049861] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.049891] pci 0000:00:16.0: reg 0x10: [mem 0xc131a000-0xc131a01f 64bit] [ 0.049952] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.050015] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.050041] pci 0000:00:1b.0: reg 0x10: [mem 0xc1314000-0xc1317fff 64bit] [ 0.050093] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.050144] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.050204] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.050256] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400 [ 0.050315] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.050366] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 0.050426] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.050478] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.050537] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.050596] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.050751] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.050773] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.050781] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.050789] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.050797] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.050804] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.050813] pci 0000:00:1f.2: reg 0x24: [mem 0xc1318000-0xc13187ff] [ 0.050839] pci 0000:00:1f.2: PME# supported from D3hot [ 0.050886] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.050903] pci 0000:00:1f.3: reg 0x10: [mem 0xc1319000-0xc13190ff 64bit] [ 0.050925] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.051023] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.051094] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.051135] pci 0000:02:00.0: reg 0x10: [mem 0xc1200000-0xc1200fff] [ 0.051246] pci 0000:02:00.0: supports D1 D2 [ 0.051248] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.057545] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.057550] pci 0000:00:1c.1: bridge window [mem 0xc1200000-0xc12fffff] [ 0.057631] pci 0000:03:00.0: [14e4:4365] type 00 class 0x028000 [ 0.057675] pci 0000:03:00.0: reg 0x10: [mem 0xc1100000-0xc1107fff 64bit] [ 0.057775] pci 0000:03:00.0: supports D1 D2 [ 0.057777] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.065567] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.065573] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff] [ 0.065633] pci 0000:04:00.0: [10ec:8136] type 00 class 0x020000 [ 0.065670] pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.065701] pci 0000:04:00.0: reg 0x18: [mem 0xc1004000-0xc1004fff 64bit] [ 0.065720] pci 0000:04:00.0: reg 0x20: [mem 0xc1000000-0xc1003fff 64bit] [ 0.065773] pci 0000:04:00.0: supports D1 D2 [ 0.065775] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.073558] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.073562] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.073565] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff] [ 0.073591] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04 [ 0.073659] PCI: pci_cache_line_size set to 64 bytes [ 0.073711] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.073713] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 0.073715] e820: reserve RAM buffer [mem 0x89ec0018-0x8bffffff] [ 0.073716] e820: reserve RAM buffer [mem 0x9c2bf000-0x9fffffff] [ 0.073718] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.073720] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff] [ 0.073869] NetLabel: Initializing [ 0.073871] NetLabel: domain hash size = 128 [ 0.073872] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.073887] NetLabel: unlabeled traffic allowed by default [ 0.073974] amd_nb: Cannot enumerate AMD northbridges [ 0.073987] clocksource: Switched to clocksource refined-jiffies [ 0.081226] AppArmor: AppArmor Filesystem Enabled [ 0.081295] pnp: PnP ACPI: disabled [ 0.082801] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.082813] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.082819] pci 0000:00:1c.1: bridge window [mem 0xc1200000-0xc12fffff] [ 0.082827] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.082832] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff] [ 0.082840] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.082843] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.082847] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff] [ 0.082857] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.082859] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff] [ 0.082862] pci_bus 0000:02: resource 1 [mem 0xc1200000-0xc12fffff] [ 0.082864] pci_bus 0000:03: resource 1 [mem 0xc1100000-0xc11fffff] [ 0.082866] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.082868] pci_bus 0000:04: resource 1 [mem 0xc1000000-0xc10fffff] [ 0.082907] NET: Registered protocol family 2 [ 0.083112] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.083280] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.083446] TCP: Hash tables configured (established 65536 bind 65536) [ 0.083481] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.083511] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.083576] NET: Registered protocol family 1 [ 0.083595] pci 0000:00:02.0: Video device with shadowed ROM [ 0.083607] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 0.084837] PCI: CLS 64 bytes, default 64 [ 0.084894] Trying to unpack rootfs image as initramfs... [ 0.999874] Freeing initrd memory: 39532K (ffff88003d960000 - ffff88003fffb000) [ 0.999923] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.999927] software IO TLB [mem 0x97e45000-0x9be45000] (64MB) mapped at [ffff880097e45000-ffff88009be44fff] [ 1.000021] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 1.000023] hw unit of domain pp0-core 2^-14 Joules [ 1.000024] hw unit of domain package 2^-14 Joules [ 1.000025] hw unit of domain dram 2^-14 Joules [ 1.000026] hw unit of domain pp1-gpu 2^-14 Joules [ 1.000144] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.000193] Scanning for low memory corruption every 60 seconds [ 1.000505] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.000534] audit: initializing netlink subsys (disabled) [ 1.000551] audit: type=2000 audit(1479007668.008:1): initialized [ 1.001166] Initialise system trusted keyring [ 1.001271] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.001273] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.003123] zbud: loaded [ 1.003423] VFS: Disk quotas dquot_6.6.0 [ 1.003464] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.003785] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.004058] fuse init (API version 7.23) [ 1.004211] Key type big_key registered [ 1.004234] Allocating IMA MOK and blacklist keyrings. [ 1.004473] Key type asymmetric registered [ 1.004477] Asymmetric key parser 'x509' registered [ 1.004520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.004558] io scheduler noop registered [ 1.004562] io scheduler deadline registered (default) [ 1.004601] io scheduler cfq registered [ 1.004722] pcieport 0000:00:1c.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 1.004806] pcieport 0000:00:1c.1: can't find IRQ for PCI INT B; please try using pci=biosirq [ 1.004875] pcieport 0000:00:1c.2: can't find IRQ for PCI INT C; please try using pci=biosirq [ 1.004941] pcieport 0000:00:1c.3: can't find IRQ for PCI INT D; please try using pci=biosirq [ 1.005047] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.005052] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.005073] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 1.005075] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.005078] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 1.005098] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 1.005100] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.005104] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 1.005125] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 1.005127] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.005130] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 1.005140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.005150] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.005181] efifb: probing for efifb [ 1.005193] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90001000000, using 4128k, total 4128k [ 1.005195] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 1.005196] efifb: scrolling: redraw [ 1.005199] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.005299] Console: switching to colour frame buffer device 170x48 [ 1.005319] fb0: EFI VGA frame buffer device [ 1.005329] intel_idle: MWAIT substates: 0x11142120 [ 1.005331] intel_idle: v0.4.1 model 0x3D [ 1.005332] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.005568] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.006937] Linux agpgart interface v0.103 [ 1.009202] brd: module loaded [ 1.010195] loop: module loaded [ 1.010424] libphy: Fixed MDIO Bus: probed [ 1.010429] tun: Universal TUN/TAP device driver, 1.6 [ 1.010431] tun: (C) 1999-2004 Max Krasnyansky [ 1.010471] PPP generic driver version 2.4.2 [ 1.010533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.010539] ehci-pci: EHCI PCI platform driver [ 1.010552] ehci-platform: EHCI generic platform driver [ 1.010563] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.010568] ohci-pci: OHCI PCI platform driver [ 1.010580] ohci-platform: OHCI generic platform driver [ 1.010590] uhci_hcd: USB Universal Host Controller Interface driver [ 1.010628] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 1.010650] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.010657] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.011738] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.011743] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.011834] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.011837] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.011839] usb usb1: Product: xHCI Host Controller [ 1.011841] usb usb1: Manufacturer: Linux 4.4.0-47-generic xhci-hcd [ 1.011843] usb usb1: SerialNumber: 0000:00:14.0 [ 1.011956] hub 1-0:1.0: USB hub found [ 1.011969] hub 1-0:1.0: 11 ports detected [ 1.012180] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.012184] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.012215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.012217] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.012219] usb usb2: Product: xHCI Host Controller [ 1.012221] usb usb2: Manufacturer: Linux 4.4.0-47-generic xhci-hcd [ 1.012222] usb usb2: SerialNumber: 0000:00:14.0 [ 1.012327] hub 2-0:1.0: USB hub found [ 1.012335] hub 2-0:1.0: 4 ports detected [ 1.012482] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.021119] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.021124] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.021243] mousedev: PS/2 mouse device common for all mice [ 1.021478] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.021499] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram [ 1.021507] i2c /dev entries driver [ 1.021570] device-mapper: uevent: version 1.0.3 [ 1.021637] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.021657] Intel P-state driver initializing. [ 1.021708] ledtrig-cpu: registered to indicate activity on CPUs [ 1.021715] EFI Variables Facility v0.08 2004-May-17 [ 1.049004] NET: Registered protocol family 10 [ 1.049128] NET: Registered protocol family 17 [ 1.049137] Key type dns_resolver registered [ 1.049266] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x22 [ 1.049288] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.051053] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring' [ 1.051066] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring' [ 1.051073] EFI: Loaded cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' linked to '.system_keyring' [ 1.051806] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.system_keyring' [ 1.052347] registered taskstats version 1 [ 1.052363] Loading compiled-in X.509 certificates [ 1.053047] Loaded X.509 cert 'Build time autogenerated kernel key: f7bc719d96df7c6d6fed8f4b9fd5d4ff001383c8' [ 1.053067] zswap: loaded using pool lzo/zbud [ 1.054424] Key type trusted registered [ 1.056682] Key type encrypted registered [ 1.056687] AppArmor: AppArmor sha1 policy hashing enabled [ 1.056690] ima: No TPM chip found, activating TPM-bypass! [ 1.056703] evm: HMAC attrs: 0x1 [ 1.056917] Magic number: 8:249:462 [ 1.056977] rtc_cmos rtc_cmos: setting system clock to 2016-11-13 03:27:48 UTC (1479007668) [ 1.057009] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.057010] EDD information not available. [ 1.058101] Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000) [ 1.058103] Write protecting the kernel read-only data: 14336k [ 1.058508] Freeing unused kernel memory: 1804K (ffff88000183d000 - ffff880001a00000) [ 1.058828] Freeing unused kernel memory: 144K (ffff880001ddc000 - ffff880001e00000) [ 1.067184] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067229] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067299] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067343] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067381] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067417] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067457] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067491] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067530] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.067570] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available) [ 1.096390] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.101564] rtsx_pci 0000:02:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 1.101626] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 21 [ 1.105647] ahci 0000:00:1f.2: version 3.0 [ 1.105654] ahci 0000:00:1f.2: can't find IRQ for PCI INT B; please try using pci=biosirq [ 1.106660] [drm] Initialized drm 1.1.0 20060810 [ 1.113508] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.113527] r8169 0000:04:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 1.118948] r8169 0000:04:00.0 eth0: RTL8106e at 0xffffc90000c68000, 38:63:bb:aa:a6:c6, XID 10900800 IRQ 23 [ 1.120049] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 1.120052] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.129261] scsi host0: ahci [ 1.135603] scsi host1: ahci [ 1.138983] AVX2 version of gcm_enc/dec engaged. [ 1.138984] AES CTR mode by8 optimization enabled [ 1.141419] scsi host2: ahci [ 1.148325] scsi host3: ahci [ 1.148375] ata1: SATA max UDMA/133 abar m2048@0xc1318000 port 0xc1318100 irq 22 [ 1.148377] ata2: DUMMY [ 1.148378] ata3: DUMMY [ 1.148379] ata4: DUMMY [ 1.187393] i915 0000:00:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 1.188431] [drm] Memory usable by graphics device = 4096M [ 1.188434] checking generic (b0000000 408000) vs hw (b0000000 10000000) [ 1.188435] fb: switching to inteldrmfb from EFI VGA [ 1.188468] Console: switching to colour dummy device 80x25 [ 1.188720] [drm] Replacing VGA console driver [ 1.245243] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.245245] [drm] Driver supports precise vblank timestamp query. [ 1.245754] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.323531] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.468489] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.470332] ata1.00: READ LOG DMA EXT failed, trying unqueued [ 1.470348] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.470350] ata1.00: ATA-9: SAMSUNG MZNTE256HMHP-000H1, EXT22H0Q, max UDMA/133 [ 1.470351] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.470518] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.470551] ata1.00: configured for UDMA/133 [ 1.470613] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZNTE256 2H0Q PQ: 0 ANSI: 5 [ 1.470876] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.470897] sd 0:0:0:0: [sda] Write Protect is off [ 1.470899] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.470906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.471144] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.473163] sda: sda1 sda2 sda3 [ 1.473516] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.519382] fbcon: inteldrmfb (fb0) is primary device [ 1.519430] Console: switching to colour frame buffer device 170x48 [ 1.519444] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.521657] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.561551] usb 1-3: New USB device found, idVendor=064e, idProduct=c33c [ 1.561554] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.561556] usb 1-3: Product: HP Truevision HD [ 1.561557] usb 1-3: Manufacturer: SuYin [ 1.561558] usb 1-3: SerialNumber: HF1019-P62A-OV03-REV0202 [ 1.966493] psmouse serio1: synaptics: queried max coordinates: x [..5690], y [..4706] [ 1.985515] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa32e125ed, max_idle_ns: 440795278010 ns [ 1.985522] clocksource: Switched to clocksource tsc [ 2.003806] psmouse serio1: synaptics: queried min coordinates: x [1300..], y [1234..] [ 2.081189] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3003, fw id: 1738305 [ 2.129721] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 14.346410] random: nonblocking pool is initialized [ 17.564761] NET: Registered protocol family 38 [ 18.021408] raid6: sse2x1 gen() 8176 MB/s [ 18.089404] raid6: sse2x1 xor() 6059 MB/s [ 18.157402] raid6: sse2x2 gen() 10012 MB/s [ 18.225403] raid6: sse2x2 xor() 6562 MB/s [ 18.293401] raid6: sse2x4 gen() 11631 MB/s [ 18.361405] raid6: sse2x4 xor() 7986 MB/s [ 18.429401] raid6: avx2x1 gen() 15795 MB/s [ 18.497403] raid6: avx2x2 gen() 18379 MB/s [ 18.565401] raid6: avx2x4 gen() 21100 MB/s [ 18.565402] raid6: using algorithm avx2x4 gen() 21100 MB/s [ 18.565403] raid6: using avx2x2 recovery algorithm [ 18.567126] xor: automatically using best checksumming function: [ 18.605403] avx : 25054.000 MB/sec [ 18.621756] Btrfs loaded [ 18.768850] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 18.932420] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 18.932491] systemd[1]: Detected architecture x86-64. [ 18.932655] systemd[1]: Set hostname to . [ 19.047907] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 19.047967] systemd[1]: Listening on fsck to fsckd communication Socket. [ 19.047988] systemd[1]: Listening on LVM2 metadata daemon socket. [ 19.048013] systemd[1]: Listening on Journal Socket (/dev/log). [ 19.048021] systemd[1]: Reached target Remote File Systems (Pre). [ 19.048027] systemd[1]: Reached target Remote File Systems. [ 19.048046] systemd[1]: Listening on udev Kernel Socket. [ 19.048067] systemd[1]: Listening on udev Control Socket. [ 19.048074] systemd[1]: Reached target User and Group Name Lookups. [ 19.048092] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 19.048118] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 19.048165] systemd[1]: Listening on Journal Audit Socket. [ 19.048233] systemd[1]: Created slice User and Session Slice. [ 19.048251] systemd[1]: Listening on LVM2 poll daemon socket. [ 19.048389] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 19.048445] systemd[1]: Created slice System Slice. [ 19.048500] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 19.048511] systemd[1]: Reached target Slices. [ 19.048557] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 19.048585] systemd[1]: Listening on Journal Socket. [ 19.048910] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 19.049197] systemd[1]: Mounting Debug File System... [ 19.050069] systemd[1]: Starting Load Kernel Modules... [ 19.050365] systemd[1]: Starting Set console keymap... [ 19.050660] systemd[1]: Mounting POSIX Message Queue File System... [ 19.053141] systemd[1]: Mounting Huge Pages File System... [ 19.053508] systemd[1]: Starting Uncomplicated firewall... [ 19.053813] systemd[1]: Started Read required files in advance. [ 19.075027] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 19.077551] systemd[1]: Started Braille Device Support. [ 19.079372] systemd[1]: Listening on Syslog Socket. [ 19.080938] systemd[1]: Starting Journal Service... [ 19.086660] systemd[1]: Mounted Debug File System. [ 19.087473] lp: driver loaded but no devices found [ 19.090523] systemd[1]: Mounted POSIX Message Queue File System. [ 19.091334] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 19.093958] systemd[1]: Started Uncomplicated firewall. [ 19.097578] systemd[1]: Mounted Huge Pages File System. [ 19.105194] ppdev: user-space parallel port driver [ 19.118439] systemd[1]: Started Load Kernel Modules. [ 19.182095] systemd[1]: Started Set console keymap. [ 19.192677] systemd[1]: Started Journal Service. [ 19.294496] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 19.330826] systemd-journald[406]: Received request to flush runtime journal from PID 1 [ 19.527858] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.564184] mei_me 0000:00:16.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 19.716172] media: Linux media interface: v0.10 [ 19.739145] Linux video capture interface: v2.00 [ 19.770369] intel_rapl: Found RAPL domain package [ 19.770372] intel_rapl: Found RAPL domain core [ 19.770373] intel_rapl: Found RAPL domain uncore [ 19.770374] intel_rapl: Found RAPL domain dram [ 19.770377] intel_rapl: RAPL package 0 domain package locked by BIOS [ 19.770379] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 19.862824] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c) [ 19.880044] input: HP Truevision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input3 [ 19.880093] usbcore: registered new interface driver uvcvideo [ 19.880094] USB Video Class driver (1.1.1) [ 19.968016] snd_hda_intel 0000:00:03.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 19.968054] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 19.974817] snd_hda_intel 0000:00:1b.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 20.023395] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 20.028286] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 20.028290] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.028291] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 20.028293] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 20.028294] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 20.028295] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 20.028297] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 20.043112] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 20.061320] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 20.061366] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 20.079654] Adding 8310780k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:8310780k SSFS [ 20.113042] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4 [ 20.113088] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5 [ 20.113127] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6 [ 20.346013] audit: type=1400 audit(1479007687.804:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=749 comm="apparmor_parser" [ 20.354034] audit: type=1400 audit(1479007687.812:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=750 comm="apparmor_parser" [ 20.354041] audit: type=1400 audit(1479007687.812:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=750 comm="apparmor_parser" [ 20.359337] audit: type=1400 audit(1479007687.816:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=754 comm="apparmor_parser" [ 20.359343] audit: type=1400 audit(1479007687.816:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=754 comm="apparmor_parser" [ 20.359347] audit: type=1400 audit(1479007687.816:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=754 comm="apparmor_parser" [ 20.359350] audit: type=1400 audit(1479007687.816:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=754 comm="apparmor_parser" [ 20.375742] audit: type=1400 audit(1479007687.832:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=756 comm="apparmor_parser" [ 20.375749] audit: type=1400 audit(1479007687.832:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=756 comm="apparmor_parser" [ 20.375752] audit: type=1400 audit(1479007687.832:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=756 comm="apparmor_parser" [ 21.493554] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.511557] r8169 0000:04:00.0 eth0: link down [ 21.511578] r8169 0000:04:00.0 eth0: link down [ 21.511645] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.493562] snd_hda_intel 0000:00:03.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 22.592796] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 23.162920] r8169 0000:04:00.0 eth0: link up [ 23.162932] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready