HL-1110 detected but doesn't print/process only Idle

Bug #1424706 reported by John MIchael James
6
This bug affects 1 person
Affects Status Importance Assigned to Milestone
cups (Ubuntu)
Invalid
Undecided
Unassigned

Bug Description

I got a HL-1110 and got its PPD file from Brother website. I searched through a lot of forums and bug reports and did what they did but still failed to print even a single page.

I am using a Raspberry Pi to print.

pi@raspberrypi ~ $ lsmod | grep usb
usblp 12158 0

pi@raspberrypi ~ $ tail -f /var/log/syslog
Feb 23 22:30:18 raspberrypi udev-configure-printer: Queue ipp://localhost:631/printers/PCube has matching device URI
Feb 23 22:30:18 raspberrypi udev-configure-printer: Device already handled
Feb 23 22:30:18 raspberrypi udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/PCube
Feb 23 22:30:40 raspberrypi kernel: [18480.404755] usb 1-1.3: USB disconnect, device number 12
Feb 23 22:30:40 raspberrypi kernel: [18480.405629] usblp0: removed
Feb 23 22:30:40 raspberrypi udev-configure-printer: remove /devices/platform/bcm2708_usb/usb1/1-1/1-1.3
Feb 23 22:30:40 raspberrypi udev-configure-printer: URI of print queue: usb://Brother/HL-1110%20series?serial=J3N457363, normalized: brother hl 1110 series serial j3n457363
Feb 23 22:30:40 raspberrypi udev-configure-printer: URI of detected printer: usb://Brother/HL-1110%20series?serial=J3N457363, normalized: brother hl 1110 series serial j3n457363
Feb 23 22:30:40 raspberrypi udev-configure-printer: Queue ipp://localhost:631/printers/PCube has matching device URI
Feb 23 22:30:40 raspberrypi udev-configure-printer: Disabled printer ipp://localhost:631/printers/PCube as the corresponding device was unplugged or turned off
Feb 23 22:30:48 raspberrypi kernel: [18488.836901] usb 1-1.3: new full-speed USB device number 13 using dwc_otg
Feb 23 22:30:48 raspberrypi kernel: [18488.942594] usb 1-1.3: New USB device found, idVendor=04f9, idProduct=0054
Feb 23 22:30:48 raspberrypi kernel: [18488.942633] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 23 22:30:48 raspberrypi kernel: [18488.942654] usb 1-1.3: Product: HL-1110 series
Feb 23 22:30:48 raspberrypi kernel: [18488.942671] usb 1-1.3: Manufacturer: Brother
Feb 23 22:30:48 raspberrypi kernel: [18488.942687] usb 1-1.3: SerialNumber: J3N457363
Feb 23 22:30:48 raspberrypi kernel: [18488.949968] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0054
Feb 23 22:30:48 raspberrypi mtp-probe: checking bus 1, device 13: "/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.3"
Feb 23 22:30:48 raspberrypi mtp-probe: bus: 1, device: 13 was not an MTP device
Feb 23 22:30:48 raspberrypi udev-configure-printer: add /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0
Feb 23 22:30:48 raspberrypi udev-configure-printer: device devpath is /devices/platform/bcm2708_usb/usb1/1-1/1-1.3
Feb 23 22:30:48 raspberrypi udev-configure-printer: Device vendor/product is 04F9:0054
Feb 23 22:30:48 raspberrypi udev-configure-printer: failed to claim interface
Feb 23 22:30:49 raspberrypi udev-configure-printer: add /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/usbmisc/lp0
Feb 23 22:30:49 raspberrypi udev-configure-printer: device devpath is /devices/platform/bcm2708_usb/usb1/1-1/1-1.3
Feb 23 22:30:49 raspberrypi udev-configure-printer: MFG:Brother MDL:HL-1110 series SERN:- serial:J3N457363
Feb 23 22:30:50 raspberrypi kernel: [18490.520318] usblp0: removed
Feb 23 22:30:50 raspberrypi kernel: [18490.550678] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0054
Feb 23 22:30:50 raspberrypi udev-configure-printer: URI contains USB serial number
Feb 23 22:30:50 raspberrypi udev-configure-printer: URI match: usb://Brother/HL-1110%20series?serial=J3N457363
Feb 23 22:30:50 raspberrypi udev-configure-printer: add /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/usbmisc/lp0
Feb 23 22:30:50 raspberrypi udev-configure-printer: device devpath is /devices/platform/bcm2708_usb/usb1/1-1/1-1.3
Feb 23 22:30:50 raspberrypi udev-configure-printer: URI of print queue: usb://Brother/HL-1110%20series?serial=J3N457363, normalized: brother hl 1110 series serial j3n457363
Feb 23 22:30:50 raspberrypi udev-configure-printer: URI of detected printer: usb://Brother/HL-1110%20series?serial=J3N457363, normalized: brother hl 1110 series serial j3n457363
Feb 23 22:30:50 raspberrypi udev-configure-printer: Queue ipp://localhost:631/printers/PCube has matching device URI
Feb 23 22:30:50 raspberrypi udev-configure-printer: Device already handled
Feb 23 22:30:50 raspberrypi udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/PCube

pi@raspberrypi ~ $ lsusb
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 009: ID 1c4f:0016 SiGma Micro
Bus 001 Device 013: ID 04f9:0054 Brother Industries, Ltd
Bus 001 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 005: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax TouchScreen

pi@raspberrypi ~ $ ls -l /dev/usb/lp* /dev/bus/usb/*/*
crw-rw-r-T 1 root root 189, 0 Jan 1 1970 /dev/bus/usb/001/001
crw-rw-r-T 1 root root 189, 1 Jan 1 1970 /dev/bus/usb/001/002
crw-rw-r-T 1 root root 189, 2 Jan 1 1970 /dev/bus/usb/001/003
crw-rw-r-T 1 root root 189, 3 Jan 1 1970 /dev/bus/usb/001/004
crw-rw-r-T 1 root root 189, 4 Jan 1 1970 /dev/bus/usb/001/005
crw-rw-r-T 1 root root 189, 8 Feb 23 19:01 /dev/bus/usb/001/009
crw-rw-r-T 1 root lp 189, 12 Feb 23 22:30 /dev/bus/usb/001/013
crw-rw---T 1 root lp 180, 0 Feb 23 22:30 /dev/usb/lp0

pi@raspberrypi ~ $ sudo usb_printerid /dev/usb/lp0
GET_DEVICE_ID string:
MFG:Brother;CMD:PJL,HBP;MDL:HL-1110 series;CLS:PRINTER;CID:Brother Laser Type3;

pi@raspberrypi ~ $ lpinfo -v
network https
network lpd
network beh
network ipps
network ipp
network smb
network socket
network http
direct usb://Brother/HL-1110%20series?serial=J3N457363

Revision history for this message
John MIchael James (xylol-mykol) wrote :
Revision history for this message
Pascal De Vuyst (pascal-devuyst) wrote :

This gdi printer needs a binary driver from Brother in addition to the PPD since Brother only provides i386 packages for this driver you will probably need to compile from source for the Raspberry Pi ARM platform.
Not a bug in Ubuntu...

Changed in cups (Ubuntu):
status: New → Invalid
Revision history for this message
Zacharias Nibbler (zifban) wrote :

Brother currently supports the armhf architecture and Raspbian:
http://support.brother.com/g/s/id/linux/en/instruction_rppx2.html

I got my HL-1110 printer to work with CUPS.

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Bug attachments

Remote bug watches

Bug watches keep track of this bug in other bug trackers.