[    5.124954] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[    5.238825] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.239113] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.256423] Ebtables v2.0 registered
[    5.267551] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.285297] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.335622] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[    5.341122] vboxdrv: Found 4 processor cores.
[    5.342389] vboxdrv: fAsync=0 offMin=0x178 offMax=0x1484
[    5.342518] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    5.342521] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[    5.361748] vboxpci: IOMMU not found (not registered)
[    5.612809] init: plymouth-upstart-bridge main process ended, respawning
[    5.621140] init: plymouth-upstart-bridge main process (1668) terminated with status 1
[    5.621149] init: plymouth-upstart-bridge main process ended, respawning
[    5.652112] cgroup: systemd-logind (799) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[    5.652116] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[    6.099074] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    6.294471] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
[    6.593573] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[    6.593582] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[    6.593624] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.289648] Bridge firewalling registered
[    7.411913] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    7.451336] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   12.431174] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   33.903449] audit_printk_skb: 168 callbacks suppressed
[   33.903452] type=1400 audit(1423296969.466:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2870 comm="apparmor_parser"
[   33.903458] type=1400 audit(1423296969.466:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2870 comm="apparmor_parser"
[   33.903885] type=1400 audit(1423296969.466:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2870 comm="apparmor_parser"
[   95.372745] usb 1-1.4: USB disconnect, device number 5
[   96.341017] usb 1-1.4: new full-speed USB device number 7 using ehci-pci
[   96.438237] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[   96.438245] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   96.438249] usb 1-1.4: Product: BCM20702A0
[   96.438253] usb 1-1.4: Manufacturer: Broadcom Corp
[   96.438256] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[   96.439672] usb 1-1.4: Direct firmware load failed with error -2
[   96.439682] usb 1-1.4: Falling back to user helper
[   96.441266] Bluetooth: can't load firmware, may not work correctly
[   96.653655] usb 1-1.4: USB disconnect, device number 7
[   99.668919] usb 1-1.4: new full-speed USB device number 8 using ehci-pci
[   99.766149] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[   99.766157] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   99.766161] usb 1-1.4: Product: BCM20702A0
[   99.766164] usb 1-1.4: Manufacturer: Broadcom Corp
[   99.766167] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[   99.767448] usb 1-1.4: Direct firmware load failed with error -2
[   99.767462] usb 1-1.4: Falling back to user helper
[   99.769684] Bluetooth: can't load firmware, may not work correctly
[   99.983938] usb 1-1.4: USB disconnect, device number 8
[  105.819912] usb 1-1.4: new full-speed USB device number 9 using ehci-pci
[  105.916766] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[  105.916772] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  105.916775] usb 1-1.4: Product: BCM20702A0
[  105.916777] usb 1-1.4: Manufacturer: Broadcom Corp
[  105.916780] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[  105.917526] usb 1-1.4: Direct firmware load failed with error -2
[  105.917530] usb 1-1.4: Falling back to user helper
[  105.919171] Bluetooth: can't load firmware, may not work correctly
[  106.131723] usb 1-1.4: USB disconnect, device number 9
[  107.610015] usb 1-1.4: new full-speed USB device number 10 using ehci-pci
[  107.706739] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[  107.706747] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  107.706751] usb 1-1.4: Product: BCM20702A0
[  107.706755] usb 1-1.4: Manufacturer: Broadcom Corp
[  107.706758] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[  107.707504] usb 1-1.4: Direct firmware load failed with error -2
[  107.707510] usb 1-1.4: Falling back to user helper
[  107.708698] Bluetooth: can't load firmware, may not work correctly
[  107.924881] usb 1-1.4: USB disconnect, device number 10
[  110.172785] usb 1-1.4: new full-speed USB device number 11 using ehci-pci
[  110.269156] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[  110.269160] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  110.269162] usb 1-1.4: Product: BCM20702A0
[  110.269164] usb 1-1.4: Manufacturer: Broadcom Corp
[  110.269166] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[  110.269846] usb 1-1.4: Direct firmware load failed with error -2
[  110.269849] usb 1-1.4: Falling back to user helper
[  110.270403] Bluetooth: can't load firmware, may not work correctly
[  110.486634] usb 1-1.4: USB disconnect, device number 11
[  111.710763] usb 1-1.4: new full-speed USB device number 12 using ehci-pci
[  111.808051] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[  111.808058] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.808063] usb 1-1.4: Product: BCM20702A0
[  111.808066] usb 1-1.4: Manufacturer: Broadcom Corp
[  111.808068] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[  111.809791] usb 1-1.4: Direct firmware load failed with error -2
[  111.809801] usb 1-1.4: Falling back to user helper
[  111.811397] Bluetooth: can't load firmware, may not work correctly
[  112.023655] usb 1-1.4: USB disconnect, device number 12
[  119.139445] usb 1-1.4: new full-speed USB device number 13 using ehci-pci
[  119.236410] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[  119.236417] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  119.236421] usb 1-1.4: Product: BCM20702A0
[  119.236424] usb 1-1.4: Manufacturer: Broadcom Corp
[  119.236427] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[  119.237364] usb 1-1.4: Direct firmware load failed with error -2
[  119.237371] usb 1-1.4: Falling back to user helper
[  119.239588] Bluetooth: can't load firmware, may not work correctly
[  135.586365] input: 00:1D:DF:E9:F8:63 as /devices/virtual/input/input17
[ 1178.867916] systemd-hostnamed[3764]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2431.256359] input: 00:1D:DF:E9:F8:63 as /devices/virtual/input/input18
[11023.336751] [drm] stuck on render ring
[11023.336759] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[11023.336760] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[11023.336761] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[11023.336761] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[11023.336762] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[13737.054258] perf samples too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15922.819721] input: 00:1D:DF:E9:F8:63 as /devices/virtual/input/input19
[15993.185628] systemd-hostnamed[5523]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[20248.624869] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[20248.728861] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[20248.729184] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[20248.730478] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[20248.737879] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[20248.855493] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[20250.271727] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[20250.271768] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[20908.168145] systemd-hostnamed[7106]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[21021.709251] Bits 55-60 of /proc/PID/pagemap entries are about to stop being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt for details.
[21022.215274] ptrace of pid 2613 was attempted by: pool (pid 7190)
[21022.326531] ptrace of pid 1973 was attempted by: pool (pid 7196)
[21022.328699] ptrace of pid 2515 was attempted by: pool (pid 7196)
[21022.330476] ptrace of pid 2624 was attempted by: pool (pid 7192)
[21022.369717] ptrace of pid 2345 was attempted by: pool (pid 7196)
[21022.446412] ptrace of pid 1927 was attempted by: pool (pid 7191)
[28395.476644] input: 00:1D:DF:E9:F8:63 as /devices/virtual/input/input20
[32572.390955] usb 1-1.4: USB disconnect, device number 13
[32575.663331] usb 1-1.4: new full-speed USB device number 14 using ehci-pci
[32575.759693] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[32575.759700] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[32575.759704] usb 1-1.4: Product: BCM20702A0
[32575.759707] usb 1-1.4: Manufacturer: Broadcom Corp
[32575.759710] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[32575.761871] usb 1-1.4: Direct firmware load failed with error -2
[32575.761878] usb 1-1.4: Falling back to user helper
[32575.763259] Bluetooth: can't load firmware, may not work correctly
[32598.201836] input: 00:1D:DF:E9:F8:63 as /devices/virtual/input/input21
[32855.454625] usb 1-1.4: USB disconnect, device number 14
[39692.732832] usb 1-1.4: new full-speed USB device number 15 using ehci-pci
[39692.829459] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[39692.829463] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[39692.829465] usb 1-1.4: Product: BCM20702A0
[39692.829466] usb 1-1.4: Manufacturer: Broadcom Corp
[39692.829468] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[39692.830203] usb 1-1.4: Direct firmware load failed with error -2
[39692.830207] usb 1-1.4: Falling back to user helper
[39692.831534] Bluetooth: can't load firmware, may not work correctly
[39707.057097] input: 00:1D:DF:E9:F8:63 as /devices/virtual/input/input22
[40734.617136] usb 1-1.4: USB disconnect, device number 15
[51388.982196] [drm] stuck on render ring
[53260.466472] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[53260.568627] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[53260.569047] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[53260.570850] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[53260.578267] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[53260.699234] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[53262.079811] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[53262.079856] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[53282.045960] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[53282.045970] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[53282.046379] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[53282.046384] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[53283.329665] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[53283.432918] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[53283.433235] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[53283.434568] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[53283.441500] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[53283.550251] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[53284.920855] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[53284.920892] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[53302.112790] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[53302.112798] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[53302.113165] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[53302.113176] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[53302.303181] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53302.303208] pci 0000:00:00.0: no hotplug settings from platform
[53302.303213] pci 0000:00:00.0: using default PCI settings
[53302.303226] i915 0000:00:02.0: no hotplug settings from platform
[53302.303230] i915 0000:00:02.0: using default PCI settings
[53302.303239] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[53302.303242] xhci_hcd 0000:00:14.0: using default PCI settings
[53302.303259] mei_me 0000:00:16.0: no hotplug settings from platform
[53302.303262] mei_me 0000:00:16.0: using default PCI settings
[53302.303281] e1000e 0000:00:19.0: no hotplug settings from platform
[53302.303284] e1000e 0000:00:19.0: using default PCI settings
[53302.303301] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[53302.303304] ehci-pci 0000:00:1a.0: using default PCI settings
[53302.303321] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[53302.303326] pcieport 0000:00:1c.0: no hotplug settings from platform
[53302.303539] sdhci-pci 0000:02:00.0: no hotplug settings from platform
[53302.303544] pcieport 0000:00:1c.1: no hotplug settings from platform
[53302.303581] iwlwifi 0000:03:00.0: no hotplug settings from platform
[53302.303586] pcieport 0000:00:1c.2: no hotplug settings from platform
[53302.303591] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[53302.303594] ehci-pci 0000:00:1d.0: using default PCI settings
[53302.303610] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[53302.303612] lpc_ich 0000:00:1f.0: using default PCI settings
[53302.303625] ahci 0000:00:1f.2: no hotplug settings from platform
[53302.303628] ahci 0000:00:1f.2: using default PCI settings
[53302.303642] pci 0000:00:1f.3: no hotplug settings from platform
[53302.303645] pci 0000:00:1f.3: using default PCI settings
[53320.616467] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[53320.616480] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[53320.617057] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[53320.617066] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[53321.485801] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[53321.590904] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[53321.591724] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[53321.593909] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[53321.600975] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[53321.725924] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[53323.097079] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[53323.097122] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[53929.253600] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[53929.253610] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[53929.253983] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[53929.253990] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[53930.191305] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53930.191327] pci 0000:00:00.0: no hotplug settings from platform
[53930.191332] pci 0000:00:00.0: using default PCI settings
[53930.191346] i915 0000:00:02.0: no hotplug settings from platform
[53930.191350] i915 0000:00:02.0: using default PCI settings
[53930.191359] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[53930.191362] xhci_hcd 0000:00:14.0: using default PCI settings
[53930.191376] mei_me 0000:00:16.0: no hotplug settings from platform
[53930.191380] mei_me 0000:00:16.0: using default PCI settings
[53930.191397] e1000e 0000:00:19.0: no hotplug settings from platform
[53930.191401] e1000e 0000:00:19.0: using default PCI settings
[53930.191414] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[53930.191417] ehci-pci 0000:00:1a.0: using default PCI settings
[53930.191434] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[53930.191441] pcieport 0000:00:1c.0: no hotplug settings from platform
[53930.191577] sdhci-pci 0000:02:00.0: no hotplug settings from platform
[53930.191583] pcieport 0000:00:1c.1: no hotplug settings from platform
[53930.191625] iwlwifi 0000:03:00.0: no hotplug settings from platform
[53930.191632] pcieport 0000:00:1c.2: no hotplug settings from platform
[53930.191638] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[53930.191641] ehci-pci 0000:00:1d.0: using default PCI settings
[53930.191653] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[53930.191654] lpc_ich 0000:00:1f.0: using default PCI settings
[53930.191665] ahci 0000:00:1f.2: no hotplug settings from platform
[53930.191667] ahci 0000:00:1f.2: using default PCI settings
[53930.191676] pci 0000:00:1f.3: no hotplug settings from platform
[53930.191677] pci 0000:00:1f.3: using default PCI settings
[54044.539254] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[54044.539268] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[54044.539767] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[54044.539775] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[54045.296758] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[54045.399083] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[54045.399544] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[54045.401003] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[54045.408465] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[54045.561795] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[54046.906127] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[54046.906166] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[54288.330427] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[54288.330433] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[54288.330903] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[54288.330907] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[54289.265415] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[54289.265450] pci 0000:00:00.0: no hotplug settings from platform
[54289.265454] pci 0000:00:00.0: using default PCI settings
[54289.265466] i915 0000:00:02.0: no hotplug settings from platform
[54289.265469] i915 0000:00:02.0: using default PCI settings
[54289.265478] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[54289.265481] xhci_hcd 0000:00:14.0: using default PCI settings
[54289.265496] mei_me 0000:00:16.0: no hotplug settings from platform
[54289.265499] mei_me 0000:00:16.0: using default PCI settings
[54289.265516] e1000e 0000:00:19.0: no hotplug settings from platform
[54289.265519] e1000e 0000:00:19.0: using default PCI settings
[54289.265535] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[54289.265538] ehci-pci 0000:00:1a.0: using default PCI settings
[54289.265555] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[54289.265564] pcieport 0000:00:1c.0: no hotplug settings from platform
[54289.265619] sdhci-pci 0000:02:00.0: no hotplug settings from platform
[54289.265632] pcieport 0000:00:1c.1: no hotplug settings from platform
[54289.265678] iwlwifi 0000:03:00.0: no hotplug settings from platform
[54289.265686] pcieport 0000:00:1c.2: no hotplug settings from platform
[54289.265693] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[54289.265698] ehci-pci 0000:00:1d.0: using default PCI settings
[54289.265717] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[54289.265721] lpc_ich 0000:00:1f.0: using default PCI settings
[54289.265739] ahci 0000:00:1f.2: no hotplug settings from platform
[54289.265743] ahci 0000:00:1f.2: using default PCI settings
[54289.265759] pci 0000:00:1f.3: no hotplug settings from platform
[54289.265762] pci 0000:00:1f.3: using default PCI settings
[55266.227827] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[55266.227834] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[55266.228245] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[55266.228248] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[55267.100771] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[55267.201998] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[55267.202390] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[55267.203706] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[55267.211101] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[55267.345756] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[55268.781120] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[55268.781164] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[55542.831448] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[55542.831461] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[55542.831839] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[55542.831851] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[55543.713224] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[55543.713259] pci 0000:00:00.0: no hotplug settings from platform
[55543.713266] pci 0000:00:00.0: using default PCI settings
[55543.713284] i915 0000:00:02.0: no hotplug settings from platform
[55543.713289] i915 0000:00:02.0: using default PCI settings
[55543.713302] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[55543.713306] xhci_hcd 0000:00:14.0: using default PCI settings
[55543.713333] mei_me 0000:00:16.0: no hotplug settings from platform
[55543.713336] mei_me 0000:00:16.0: using default PCI settings
[55543.713352] e1000e 0000:00:19.0: no hotplug settings from platform
[55543.713355] e1000e 0000:00:19.0: using default PCI settings
[55543.713371] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[55543.713373] ehci-pci 0000:00:1a.0: using default PCI settings
[55543.713390] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[55543.713396] pcieport 0000:00:1c.0: no hotplug settings from platform
[55543.713583] sdhci-pci 0000:02:00.0: no hotplug settings from platform
[55543.713590] pcieport 0000:00:1c.1: no hotplug settings from platform
[55543.713632] iwlwifi 0000:03:00.0: no hotplug settings from platform
[55543.713644] pcieport 0000:00:1c.2: no hotplug settings from platform
[55543.713657] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[55543.713662] ehci-pci 0000:00:1d.0: using default PCI settings
[55543.713680] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[55543.713684] lpc_ich 0000:00:1f.0: using default PCI settings
[55543.713702] ahci 0000:00:1f.2: no hotplug settings from platform
[55543.713706] ahci 0000:00:1f.2: using default PCI settings
[55543.713721] pci 0000:00:1f.3: no hotplug settings from platform
[55543.713724] pci 0000:00:1f.3: using default PCI settings
[55629.927812] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[55629.927828] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[55629.928327] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[55629.928340] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[55630.769029] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[55630.870319] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[55630.870770] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[55630.872508] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[55630.879937] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[55631.012838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[55632.413394] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[55632.413436] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[59784.294739] perf samples too long (5007 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[84216.666421] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[84216.666429] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[84216.666931] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[84216.666933] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[84216.668578] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[84216.668601] pci 0000:00:00.0: no hotplug settings from platform
[84216.668606] pci 0000:00:00.0: using default PCI settings
[84216.668620] i915 0000:00:02.0: no hotplug settings from platform
[84216.668624] i915 0000:00:02.0: using default PCI settings
[84216.668636] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[84216.668640] xhci_hcd 0000:00:14.0: using default PCI settings
[84216.668660] mei_me 0000:00:16.0: no hotplug settings from platform
[84216.668665] mei_me 0000:00:16.0: using default PCI settings
[84216.668685] e1000e 0000:00:19.0: no hotplug settings from platform
[84216.668689] e1000e 0000:00:19.0: using default PCI settings
[84216.668706] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[84216.668710] ehci-pci 0000:00:1a.0: using default PCI settings
[84216.668730] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[84216.668737] pcieport 0000:00:1c.0: no hotplug settings from platform
[84216.668838] sdhci-pci 0000:02:00.0: no hotplug settings from platform
[84216.668846] pcieport 0000:00:1c.1: no hotplug settings from platform
[84216.668891] iwlwifi 0000:03:00.0: no hotplug settings from platform
[84216.668900] pcieport 0000:00:1c.2: no hotplug settings from platform
[84216.668907] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[84216.668912] ehci-pci 0000:00:1d.0: using default PCI settings
[84216.668932] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[84216.668945] lpc_ich 0000:00:1f.0: using default PCI settings
[84216.668969] ahci 0000:00:1f.2: no hotplug settings from platform
[84216.668972] ahci 0000:00:1f.2: using default PCI settings
[84216.668989] pci 0000:00:1f.3: no hotplug settings from platform
[84216.668993] pci 0000:00:1f.3: using default PCI settings
[84727.277032] usb 1-1.4: new full-speed USB device number 16 using ehci-pci
[84727.374287] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[84727.374297] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[84727.374302] usb 1-1.4: Product: BCM20702A0
[84727.374306] usb 1-1.4: Manufacturer: Broadcom Corp
[84727.374310] usb 1-1.4: SerialNumber: 9C2A7083AE1A
[84727.375584] usb 1-1.4: Direct firmware load failed with error -2
[84727.375591] usb 1-1.4: Falling back to user helper
[84727.377935] Bluetooth: can't load firmware, may not work correctly
[84730.774006] input: 00:1D:DF:E9:F8:63 as /devices/virtual/input/input23
[86355.783929] usb 1-1.4: USB disconnect, device number 16
[95071.907001] [drm] stuck on render ring
[100278.549253] e1000e: eth0 NIC Link is Down
[100281.066856] thinkpad_acpi: EC reports that Thermal Table has changed
[100282.744619] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[106178.499771] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[106178.532218] thinkpad_acpi: EC reports that Thermal Table has changed
[106185.526707] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[106185.526756] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[107364.022411] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[107364.124020] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[107364.124336] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[107364.126210] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[107364.130557] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[107364.241923] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[107365.631242] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[107365.631288] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[107384.075276] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[107384.075280] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[107384.075649] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[107384.075653] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[107384.860524] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[107384.961795] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[107384.962110] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[107384.963118] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[107384.970470] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[107385.079055] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[107386.452223] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[107386.452262] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[118020.193716] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[118020.193730] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[118020.194178] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[118020.194186] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[118020.195901] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[118020.195930] pci 0000:00:00.0: no hotplug settings from platform
[118020.195935] pci 0000:00:00.0: using default PCI settings
[118020.195950] i915 0000:00:02.0: no hotplug settings from platform
[118020.195954] i915 0000:00:02.0: using default PCI settings
[118020.195965] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[118020.195969] xhci_hcd 0000:00:14.0: using default PCI settings
[118020.195988] mei_me 0000:00:16.0: no hotplug settings from platform
[118020.195991] mei_me 0000:00:16.0: using default PCI settings
[118020.196010] e1000e 0000:00:19.0: no hotplug settings from platform
[118020.196014] e1000e 0000:00:19.0: using default PCI settings
[118020.196032] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[118020.196036] ehci-pci 0000:00:1a.0: using default PCI settings
[118020.196056] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[118020.196063] pcieport 0000:00:1c.0: no hotplug settings from platform
[118020.196166] sdhci-pci 0000:02:00.0: no hotplug settings from platform
[118020.196174] pcieport 0000:00:1c.1: no hotplug settings from platform
[118020.196219] iwlwifi 0000:03:00.0: no hotplug settings from platform
[118020.196228] pcieport 0000:00:1c.2: no hotplug settings from platform
[118020.196236] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[118020.196240] ehci-pci 0000:00:1d.0: using default PCI settings
[118020.196258] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[118020.196261] lpc_ich 0000:00:1f.0: using default PCI settings
[118020.196277] ahci 0000:00:1f.2: no hotplug settings from platform
[118020.196280] ahci 0000:00:1f.2: using default PCI settings
[118020.196295] pci 0000:00:1f.3: no hotplug settings from platform
[118020.196297] pci 0000:00:1f.3: using default PCI settings
[124198.703437] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[124198.805743] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[124198.806070] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[124198.807515] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[124198.814972] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[124198.925660] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[124200.328888] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[124200.328927] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[124206.859777] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[124206.859781] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[124206.860136] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[124206.860140] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[124207.629660] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[124207.731623] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[124207.731878] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[124207.732886] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[124207.740318] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[124207.866851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[124209.238757] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[124209.238796] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[164670.882543] type=1400 audit(1423461497.073:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=9243 comm="apparmor_parser"
[164670.882548] type=1400 audit(1423461497.073:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=9243 comm="apparmor_parser"
[164670.882848] type=1400 audit(1423461497.073:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=9243 comm="apparmor_parser"
[168626.962507] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[168626.962513] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[168626.962927] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[168626.962931] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[168626.963720] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[168626.963732] pci 0000:00:00.0: no hotplug settings from platform
[168626.963735] pci 0000:00:00.0: using default PCI settings
[168626.963741] i915 0000:00:02.0: no hotplug settings from platform
[168626.963743] i915 0000:00:02.0: using default PCI settings
[168626.963749] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[168626.963751] xhci_hcd 0000:00:14.0: using default PCI settings
[168626.963763] mei_me 0000:00:16.0: no hotplug settings from platform
[168626.963765] mei_me 0000:00:16.0: using default PCI settings
[168626.963776] e1000e 0000:00:19.0: no hotplug settings from platform
[168626.963778] e1000e 0000:00:19.0: using default PCI settings
[168626.963788] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[168626.963790] ehci-pci 0000:00:1a.0: using default PCI settings
[168626.963800] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[168626.963804] pcieport 0000:00:1c.0: no hotplug settings from platform
[168626.963967] sdhci-pci 0000:02:00.0: no hotplug settings from platform
[168626.963971] pcieport 0000:00:1c.1: no hotplug settings from platform
[168626.964005] iwlwifi 0000:03:00.0: no hotplug settings from platform
[168626.964009] pcieport 0000:00:1c.2: no hotplug settings from platform
[168626.964012] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[168626.964014] ehci-pci 0000:00:1d.0: using default PCI settings
[168626.964026] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[168626.964028] lpc_ich 0000:00:1f.0: using default PCI settings
[168626.964037] ahci 0000:00:1f.2: no hotplug settings from platform
[168626.964039] ahci 0000:00:1f.2: using default PCI settings
[168626.964049] pci 0000:00:1f.3: no hotplug settings from platform
[168626.964051] pci 0000:00:1f.3: using default PCI settings
[183437.670945] systemd-hostnamed[19923]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[205224.846211] systemd-hostnamed[23422]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[205465.720831] nf_conntrack: falling back to vmalloc.
[205465.720975] nf_conntrack: falling back to vmalloc.
[206535.097468] systemd-hostnamed[24028]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[211632.758357] ptrace of pid 2594 was attempted by: pool (pid 25208)
[211642.770423] ptrace of pid 2009 was attempted by: pool (pid 25223)
[211642.793017] ptrace of pid 1967 was attempted by: pool (pid 25226)
[211642.825114] ptrace of pid 2515 was attempted by: pool (pid 25224)
[211642.834070] ptrace of pid 2594 was attempted by: pool (pid 25227)