[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 640MB; using 2048kB for hash table (at c7e00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-35-powerpc-smp (buildd@denneed01) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 02:11:32 UTC 2014 (Ubuntu 3.13.0-35.62-powerpc-smp 3.13.11.6) [ 0.000000] Found initrd at 0xc1a00000:0xc2c43000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: iBook G4 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=720, gen1=719 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x28000000, Total RAM: 0x28000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00000000-0x27ffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x27ffffff] [ 0.000000] On node 0 totalpages: 163840 [ 0.000000] free_area_init_node: node 0, pgdat c0a47d20, node_mem_map c0c4d000 [ 0.000000] DMA zone: 1280 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 163840 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1153000 s15520 r8192 d13152 u36864 [ 0.000000] pcpu-alloc: s15520 r8192 d13152 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 162560 [ 0.000000] Kernel command line: root=UUID=ec34988f-8d65-4f66-ba8c-f1bd65a3d73f ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] allocated 1310720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 548712K/655360K available (7272K kernel code, 496K rwdata, 2388K rodata, 500K init, 1870K bss, 106648K reserved, 0K highmem) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfff9f000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap [ 0.000000] * 0xe9000000..0xfdf32000 : vmalloc & ioremap [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 18.432000 MHz [ 0.000000] time_init: processor frequency = 933.333331 MHz [ 0.000000] clocksource: timebase mult[3640e38e] shift[24] registered [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [udbg0] disabled [ 0.000537] pid_max: default: 32768 minimum: 301 [ 0.000691] Security Framework initialized [ 0.000805] AppArmor: AppArmor initialized [ 0.000815] Yama: becoming mindful. [ 0.001025] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001038] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001887] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.008365] Initializing cgroup subsys memory [ 0.008410] Initializing cgroup subsys devices [ 0.008420] Initializing cgroup subsys freezer [ 0.008431] Initializing cgroup subsys blkio [ 0.008440] Initializing cgroup subsys perf_event [ 0.008581] ftrace: allocating 24056 entries in 71 pages [ 0.047621] PowerMac SMP probe found 1 cpus [ 0.047648] MPC7450 family performance monitor hardware support registered [ 0.053823] Brought up 1 CPUs [ 0.054739] devtmpfs: initialized [ 0.055166] EVM: security.selinux [ 0.055175] EVM: security.SMACK64 [ 0.055180] EVM: security.capability [ 0.057123] regulator-dummy: no parameters [ 0.057442] NET: Registered protocol family 16 [ 0.058477] cpuidle: using governor ladder [ 0.058491] cpuidle: using governor menu [ 0.058790] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.058805] channel 0 bus [ 0.058824] channel 1 bus [ 0.058921] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.058931] channel 0 bus [ 0.058955] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.058963] channel 1 bus [ 0.058971] channel 2 bus [ 0.076167] PCI: Probing PCI hardware [ 0.076398] PCI host bridge to bus 0000:00 [ 0.076425] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) [ 0.076438] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.076448] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff] [ 0.076463] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.076478] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.076549] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 [ 0.076888] pci 0000:00:10.0: [1002:5c63] type 00 class 0x030000 [ 0.076924] pci 0000:00:10.0: reg 0x10: [mem 0x98000000-0x9fffffff pref] [ 0.076942] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff] [ 0.076960] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x9000ffff] [ 0.077000] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref] [ 0.077062] pci 0000:00:10.0: supports D1 D2 [ 0.077319] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.077478] PCI host bridge to bus 0001:10 [ 0.077492] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff] [ 0.077503] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff] [ 0.077513] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff] [ 0.077525] pci_bus 0001:10: root bus resource [bus 10-ff] [ 0.077537] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff [ 0.077595] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000 [ 0.077809] pci 0001:10:12.0: [14e4:4320] type 00 class 0x028000 [ 0.077839] pci 0001:10:12.0: reg 0x10: [mem 0x80084000-0x80085fff] [ 0.077924] pci 0001:10:12.0: supports D1 D2 [ 0.077935] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.078111] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000 [ 0.078136] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.078350] pci 0001:10:18.0: [106b:003f] type 00 class 0x0c0310 [ 0.078375] pci 0001:10:18.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.078542] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310 [ 0.078565] pci 0001:10:19.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.078750] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310 [ 0.078774] pci 0001:10:1a.0: reg 0x10: [mem 0x80083000-0x80083fff] [ 0.078948] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310 [ 0.078976] pci 0001:10:1b.0: reg 0x10: [mem 0x80082000-0x80082fff] [ 0.079061] pci 0001:10:1b.0: supports D1 D2 [ 0.079071] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.079241] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310 [ 0.079270] pci 0001:10:1b.1: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.079356] pci 0001:10:1b.1: supports D1 D2 [ 0.079366] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.079616] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.079647] pci 0001:10:1b.2: reg 0x10: [mem 0x80080000-0x800800ff] [ 0.079735] pci 0001:10:1b.2: supports D1 D2 [ 0.079745] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080158] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10 [ 0.080296] PCI host bridge to bus 0002:20 [ 0.080311] pci_bus 0002:20: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) [ 0.080322] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff] [ 0.080334] pci_bus 0002:20: root bus resource [bus 20-ff] [ 0.080346] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff [ 0.080415] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000 [ 0.080612] pci 0002:20:0d.0: [106b:003b] type 00 class 0xff0000 [ 0.080635] pci 0002:20:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff] [ 0.080801] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010 [ 0.080826] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff] [ 0.080899] pci 0002:20:0e.0: supports D1 D2 [ 0.080909] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.081076] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000 [ 0.081100] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff] [ 0.081154] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref] [ 0.081406] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20 [ 0.081587] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] [ 0.081615] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff] [ 0.081625] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.081635] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff] [ 0.081655] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff] [ 0.081665] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff] [ 0.081675] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff] [ 0.081688] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff] [ 0.081699] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff] [ 0.090040] bio: create slab at 0 [ 0.091718] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.091768] vgaarb: loaded [ 0.091774] vgaarb: bridge control possible 0000:00:10.0 [ 0.093022] SCSI subsystem initialized [ 0.093345] libata version 3.00 loaded. [ 0.093603] usbcore: registered new interface driver usbfs [ 0.093650] usbcore: registered new interface driver hub [ 0.093811] usbcore: registered new device driver usb [ 0.094990] NetLabel: Initializing [ 0.095004] NetLabel: domain hash size = 128 [ 0.095009] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.095086] NetLabel: unlabeled traffic allowed by default [ 0.095485] Switched to clocksource timebase [ 0.114068] AppArmor: AppArmor Filesystem Enabled [ 0.122460] NET: Registered protocol family 2 [ 0.123340] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.123438] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.123679] TCP: Hash tables configured (established 8192 bind 8192) [ 0.123899] TCP: reno registered [ 0.123921] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.124013] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.124451] NET: Registered protocol family 1 [ 0.124574] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 0.124593] pci 0001:10:18.0: Can't enable PCI device, BIOS handoff failed. [ 0.124609] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 0.124617] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed. [ 0.124647] pci 0001:10:1a.0: enabling device (0000 -> 0002) [ 0.179613] pci 0001:10:1b.0: enabling device (0000 -> 0002) [ 0.235530] pci 0001:10:1b.1: enabling device (0000 -> 0002) [ 0.291521] pci 0001:10:1b.2: enabling device (0004 -> 0006) [ 0.291580] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.291943] Trying to unpack rootfs image as initramfs... [ 1.584492] Freeing initrd memory: 18700K (c1a00000 - c2c43000) [ 1.585091] Thermal assist unit not available [ 1.586212] Initialise system trusted keyring [ 1.586460] audit: initializing netlink socket (disabled) [ 1.586521] type=2000 audit(1.568:1): initialized [ 1.726654] zbud: loaded [ 1.727256] VFS: Disk quotas dquot_6.5.2 [ 1.727566] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.729822] fuse init (API version 7.22) [ 1.730160] msgmni has been set to 1238 [ 1.730502] Key type big_key registered [ 1.732290] Key type asymmetric registered [ 1.732306] Asymmetric key parser 'x509' registered [ 1.732423] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.732635] io scheduler noop registered [ 1.732646] io scheduler deadline registered (default) [ 1.732831] io scheduler cfq registered [ 1.733302] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.733334] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.733699] radeonfb 0000:00:10.0: enabling device (0006 -> 0007) [ 1.929738] radeonfb 0000:00:10.0: Invalid ROM contents [ 1.929758] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 [ 1.929774] radeonfb: Retrieved PLL infos from Open Firmware [ 1.929786] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz [ 1.929792] radeonfb: PLL min 12000 max 35000 [ 2.024586] i2c i2c-2: unable to read EDID block. [ 2.176565] i2c i2c-2: unable to read EDID block. [ 2.328564] i2c i2c-2: unable to read EDID block. [ 2.480563] i2c i2c-3: unable to read EDID block. [ 2.632563] i2c i2c-3: unable to read EDID block. [ 2.784566] i2c i2c-3: unable to read EDID block. [ 2.840522] radeonfb: Monitor 1 type LCD found [ 2.840530] radeonfb: EDID probed [ 2.840536] radeonfb: Monitor 2 type no found [ 2.840556] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0 [ 2.979490] radeonfb: Dynamic Clock Power Management enabled [ 3.007473] Console: switching to colour frame buffer device 128x48 [ 3.023416] radeonfb: Backlight initialized (radeonbl0) [ 3.023426] radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c" [ 3.024028] ipmi message handler version 39.2 [ 3.025465] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.031055] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 3.031156] ePAPR hypervisor byte channel driver [ 3.031578] Generic non-volatile memory driver v1.1 [ 3.031736] Linux agpgart interface v0.103 [ 3.038151] brd: module loaded [ 3.041500] loop: module loaded [ 3.042027] MacIO PCI driver attached to Intrepid chipset [ 3.043593] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 3.044193] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 3.045894] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002) [ 3.046186] adb: starting probe task... [ 3.059576] pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 [ 3.060336] scsi0 : pata_macio [ 3.060597] ata1: PATA max UDMA/100 irq 39 [ 3.224106] ata1.00: ATA-6: FUJITSU MHT2040AT, 8162, max UDMA/100 [ 3.224121] ata1.00: 78140160 sectors, multi 16: LBA48 [ 3.239975] ata1.00: configured for UDMA/100 [ 3.240522] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040A 8162 PQ: 0 ANSI: 5 [ 3.241312] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.241776] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 3.242030] sd 0:0:0:0: [sda] Write Protect is off [ 3.242045] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.242152] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.299072] adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f [ 3.305892] ADB keyboard at 2, handler 1 [ 3.305926] Detected ADB keyboard, type ANSI. [ 3.306136] input: ADB keyboard as /devices/virtual/input/input0 [ 3.306331] input: ADB Powerbook buttons as /devices/virtual/input/input1 [ 3.317763] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 3.320003] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.321354] ADB mouse at 3, handler set to 4 (trackpad) [ 3.381925] input: ADB mouse as /devices/virtual/input/input2 [ 3.381949] adb: finished probe task... [ 4.079522] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 [ 4.080286] scsi1 : pata_macio [ 4.080499] ata2: PATA max MWDMA2 irq 24 [ 4.082191] libphy: Fixed MDIO Bus: probed [ 4.082802] tun: Universal TUN/TAP device driver, 1.6 [ 4.082810] tun: (C) 1999-2004 Max Krasnyansky [ 4.083203] PPP generic driver version 2.4.2 [ 4.083753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.083905] ehci-pci: EHCI PCI platform driver [ 4.084092] ehci-pci 0001:10:1b.2: EHCI Host Controller [ 4.084124] ehci-pci 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 4.084314] ehci-pci 0001:10:1b.2: irq 63, io mem 0x80080000 [ 4.095522] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 4.095848] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.095860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.095870] usb usb1: Product: EHCI Host Controller [ 4.095879] usb usb1: Manufacturer: Linux 3.13.0-35-powerpc-smp ehci_hcd [ 4.095888] usb usb1: SerialNumber: 0001:10:1b.2 [ 4.096462] hub 1-0:1.0: USB hub found [ 4.096510] hub 1-0:1.0: 5 ports detected [ 4.097154] ehci-platform: EHCI generic platform driver [ 4.097230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.097277] ohci-pci: OHCI PCI platform driver [ 4.097323] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 4.097397] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 4.097483] ohci-pci 0001:10:1a.0: OHCI PCI host controller [ 4.097512] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 4.097616] ohci-pci 0001:10:1a.0: irq 29, io mem 0x80083000 [ 4.171247] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.171261] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.171270] usb usb2: Product: OHCI PCI host controller [ 4.171280] usb usb2: Manufacturer: Linux 3.13.0-35-powerpc-smp ohci_hcd [ 4.171289] usb usb2: SerialNumber: 0001:10:1a.0 [ 4.171928] hub 2-0:1.0: USB hub found [ 4.171978] hub 2-0:1.0: 2 ports detected [ 4.172425] ohci-pci 0001:10:1b.0: OHCI PCI host controller [ 4.172454] ohci-pci 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 4.172513] ohci-pci 0001:10:1b.0: irq 63, io mem 0x80082000 [ 4.247429] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.247443] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.247453] usb usb3: Product: OHCI PCI host controller [ 4.247462] usb usb3: Manufacturer: Linux 3.13.0-35-powerpc-smp ohci_hcd [ 4.247496] usb usb3: SerialNumber: 0001:10:1b.0 [ 4.248087] hub 3-0:1.0: USB hub found [ 4.248134] hub 3-0:1.0: 3 ports detected [ 4.248645] ohci-pci 0001:10:1b.1: OHCI PCI host controller [ 4.248674] ohci-pci 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 4.248753] ohci-pci 0001:10:1b.1: irq 63, io mem 0x80081000 [ 4.251880] ata2.00: ATAPI: MATSHITACD-RW CW-8123, CA0T, max UDMA/33 [ 4.267759] ata2.00: configured for MWDMA2 [ 4.270488] scsi 1:0:0:0: CD-ROM MATSHITA CD-RW CW-8123 CA0T PQ: 0 ANSI: 5 [ 4.272478] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 4.272496] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.273095] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.273590] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.323225] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.323240] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.323250] usb usb4: Product: OHCI PCI host controller [ 4.323260] usb usb4: Manufacturer: Linux 3.13.0-35-powerpc-smp ohci_hcd [ 4.323269] usb usb4: SerialNumber: 0001:10:1b.1 [ 4.323941] hub 4-0:1.0: USB hub found [ 4.323995] hub 4-0:1.0: 2 ports detected [ 4.324483] ohci-platform: OHCI generic platform driver [ 4.324579] uhci_hcd: USB Universal Host Controller Interface driver [ 4.325568] mousedev: PS/2 mouse device common for all mice [ 4.326455] PowerMac i2c bus pmu 2 registered [ 4.326599] PowerMac i2c bus pmu 1 registered [ 4.326728] PowerMac i2c bus mac-io 0 registered [ 4.326899] i2c i2c-6: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem [ 4.327060] PowerMac i2c bus uni-n 1 registered [ 4.327192] adt746x: version 1 (supported) [ 4.327202] sensor 0: PWR/MEMORY BOTTOMSIDE [ 4.327210] sensor 1: CPU BOTTOMSIDE [ 4.327217] sensor 2: GPU ON DIE [ 4.327894] adt746x: ADT7467 initializing [ 4.330839] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70 [ 4.334043] i2c i2c-7: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0 [ 4.334206] PowerMac i2c bus uni-n 0 registered [ 4.334592] device-mapper: uevent: version 1.0.3 [ 4.335051] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 4.335135] Registering PowerMac CPU frequency driver [ 4.335142] Low: 707 Mhz, High: 931 Mhz, Boot: 707 Mhz [ 4.355515] ledtrig-cpu: registered to indicate activity on CPUs [ 4.355994] TCP: cubic registered [ 4.356420] NET: Registered protocol family 10 [ 4.357156] NET: Registered protocol family 17 [ 4.357208] Key type dns_resolver registered [ 4.357740] Loading compiled-in X.509 certificates [ 4.364147] Loaded X.509 cert 'Magrathea: Glacier signing key: 72201709efa8472af9c6fce405ee4f955db2b271' [ 4.364234] registered taskstats version 1 [ 4.377728] Key type trusted registered [ 4.390643] Key type encrypted registered [ 4.403765] AppArmor: AppArmor sha1 policy hashing enabled [ 4.404146] regulator-dummy: disabling [ 4.404553] input: PMU as /devices/virtual/input/input3 [ 4.404819] /build/buildd/linux-3.13.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 4.406127] Freeing unused kernel memory: 500K (c0973000 - c09f0000) [ 4.492615] systemd-udevd[92]: starting version 204 [ 4.657448] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) [ 4.657510] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00 [ 4.657520] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243) [ 4.657530] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243) [ 4.657539] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243) [ 4.657548] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243) [ 4.657558] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243) [ 4.672425] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 [ 4.818450] sungem.c:v1.0 David S. Miller [ 4.819240] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:b6:01:a6 [ 4.858977] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002) [ 4.867681] usb 3-1: new full-speed USB device number 2 using ohci-pci [ 4.912102] firewire_ohci 0002:20:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 5.080616] usb 3-1: New USB device found, idVendor=05ac, idProduct=1002 [ 5.080634] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.080642] usb 3-1: Product: Hub in Apple Extended USB Keyboard [ 5.080649] usb 3-1: Manufacturer: Mitsumi Electric [ 5.083836] hub 3-1:1.0: USB hub found [ 5.086613] hub 3-1:1.0: 3 ports detected [ 5.389608] usb 3-1.1: new full-speed USB device number 3 using ohci-pci [ 5.500559] usb 3-1.1: New USB device found, idVendor=05ac, idProduct=0204 [ 5.500577] usb 3-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 5.500584] usb 3-1.1: Product: Apple Extended USB Keyboard [ 5.500591] usb 3-1.1: Manufacturer: Mitsumi Electric [ 5.558817] hidraw: raw HID events driver (C) Jiri Kosina [ 5.596027] usb 3-1.3: new low-speed USB device number 4 using ohci-pci [ 5.608772] usbcore: registered new interface driver usbhid [ 5.608791] usbhid: USB HID core driver [ 5.632880] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input4 [ 5.637012] hid-generic 0003:05AC:0204.0001: input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-1.1/input0 [ 5.644567] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input5 [ 5.647777] hid-generic 0003:05AC:0204.0002: input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-1.1/input1 [ 5.720573] usb 3-1.3: New USB device found, idVendor=046d, idProduct=c05a [ 5.720591] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.720598] usb 3-1.3: Product: USB Optical Mouse [ 5.720605] usb 3-1.3: Manufacturer: Logitech [ 5.732529] input: Logitech USB Optical Mouse as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6 [ 5.733022] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0001:10:1b.0-1.3/input0 [ 6.453595] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 6.532110] random: nonblocking pool is initialized [ 9.836302] init: plymouth-upstart-bridge main process (142) terminated with status 1 [ 9.836388] init: plymouth-upstart-bridge main process ended, respawning [ 9.864019] init: plymouth-upstart-bridge main process (153) terminated with status 1 [ 9.864097] init: plymouth-upstart-bridge main process ended, respawning [ 9.883285] init: plymouth-upstart-bridge main process (155) terminated with status 1 [ 9.883362] init: plymouth-upstart-bridge main process ended, respawning [ 9.907775] init: plymouth-upstart-bridge main process (157) terminated with status 1 [ 9.907862] init: plymouth-upstart-bridge main process ended, respawning [ 9.923369] init: plymouth-upstart-bridge main process (159) terminated with status 1 [ 9.923450] init: plymouth-upstart-bridge main process ended, respawning [ 9.948087] init: plymouth-upstart-bridge main process (160) terminated with status 1 [ 9.948170] init: plymouth-upstart-bridge main process ended, respawning [ 9.977024] init: plymouth-upstart-bridge main process (162) terminated with status 1 [ 9.977111] init: plymouth-upstart-bridge main process ended, respawning [ 10.012885] init: plymouth-upstart-bridge main process (164) terminated with status 1 [ 10.012963] init: plymouth-upstart-bridge main process ended, respawning [ 27.059863] Adding 539116k swap on /dev/sda5. Priority:-1 extents:1 across:539116k FS [ 27.336346] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.034194] systemd-udevd[276]: starting version 204 [ 28.091334] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro [ 28.862664] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 28.883852] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 28.892342] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 30.586846] i2c i2c-0: PMac Keywest Audio: attach_adapter method is deprecated [ 30.586866] i2c i2c-0: Please use another way to instantiate your i2c_client [ 30.586877] i2c i2c-1: PMac Keywest Audio: attach_adapter method is deprecated [ 30.586883] i2c i2c-1: Please use another way to instantiate your i2c_client [ 30.586892] i2c i2c-2: PMac Keywest Audio: attach_adapter method is deprecated [ 30.586899] i2c i2c-2: Please use another way to instantiate your i2c_client [ 30.586907] i2c i2c-3: PMac Keywest Audio: attach_adapter method is deprecated [ 30.586914] i2c i2c-3: Please use another way to instantiate your i2c_client [ 30.586922] i2c i2c-4: PMac Keywest Audio: attach_adapter method is deprecated [ 30.586929] i2c i2c-4: Please use another way to instantiate your i2c_client [ 30.586937] i2c i2c-5: PMac Keywest Audio: attach_adapter method is deprecated [ 30.586944] i2c i2c-5: Please use another way to instantiate your i2c_client [ 30.586952] i2c i2c-6: PMac Keywest Audio: attach_adapter method is deprecated [ 30.586959] i2c i2c-6: Please use another way to instantiate your i2c_client [ 30.586976] i2c i2c-6: Failed to register i2c client keywest at 0x35 (-16) [ 30.586986] i2c i2c-7: PMac Keywest Audio: attach_adapter method is deprecated [ 30.586992] i2c i2c-7: Please use another way to instantiate your i2c_client [ 30.587003] i2c i2c-8: PMac Keywest Audio: attach_adapter method is deprecated [ 30.587009] i2c i2c-8: Please use another way to instantiate your i2c_client [ 30.750944] i2c /dev entries driver [ 30.832481] cfg80211: Calling CRDA to update world regulatory domain [ 30.963676] apm_emu: PMU APM Emulation initialized. [ 31.213806] lp: driver loaded but no devices found [ 31.331791] ppdev: user-space parallel port driver [ 31.884600] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 32.330618] type=1400 audit(32.310:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=431 comm="apparmor_parser" [ 32.330654] type=1400 audit(32.310:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=431 comm="apparmor_parser" [ 32.330674] type=1400 audit(32.310:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=431 comm="apparmor_parser" [ 32.340308] type=1400 audit(32.322:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=431 comm="apparmor_parser" [ 32.340352] type=1400 audit(32.322:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=431 comm="apparmor_parser" [ 32.341140] type=1400 audit(32.322:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=431 comm="apparmor_parser" [ 33.337158] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 33.370067] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2 [ 33.403465] Broadcom 43xx driver loaded [ Features: PNL ] [ 33.743449] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 34.788628] Bluetooth: Core ver 2.17 [ 34.788956] NET: Registered protocol family 31 [ 34.788967] Bluetooth: HCI device and connection manager initialized [ 34.789003] Bluetooth: HCI socket layer initialized [ 34.789013] Bluetooth: L2CAP socket layer initialized [ 34.789042] Bluetooth: SCO socket layer initialized [ 34.863696] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.863715] Bluetooth: BNEP filters: protocol multicast [ 34.863752] Bluetooth: BNEP socket layer initialized [ 35.125579] Bluetooth: RFCOMM TTY layer initialized [ 35.125631] Bluetooth: RFCOMM socket layer initialized [ 35.125670] Bluetooth: RFCOMM ver 1.11 [ 35.786902] type=1400 audit(35.766:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=581 comm="apparmor_parser" [ 35.786945] type=1400 audit(35.766:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=581 comm="apparmor_parser" [ 35.793871] type=1400 audit(35.774:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=581 comm="apparmor_parser" [ 36.041699] init: cups main process (584) killed by HUP signal [ 36.041785] init: cups main process ended, respawning [ 37.794932] input: Macintosh mouse button emulation as /devices/virtual/input/input7 [ 38.037122] init: failsafe main process (616) killed by TERM signal [ 39.544350] cfg80211: World regulatory domain updated: [ 39.544373] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.544381] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.544388] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.544395] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 39.544401] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.544408] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 40.571371] type=1400 audit(40.550:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=785 comm="apparmor_parser" [ 40.571411] type=1400 audit(40.550:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=785 comm="apparmor_parser" [ 40.580590] type=1400 audit(40.562:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=785 comm="apparmor_parser" [ 40.670896] type=1400 audit(40.650:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=789 comm="apparmor_parser" [ 40.670946] type=1400 audit(40.650:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=789 comm="apparmor_parser" [ 40.670967] type=1400 audit(40.650:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=789 comm="apparmor_parser" [ 40.684792] type=1400 audit(40.666:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=789 comm="apparmor_parser" [ 40.685132] type=1400 audit(40.666:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=789 comm="apparmor_parser" [ 40.686367] type=1400 audit(40.666:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=789 comm="apparmor_parser" [ 41.050077] type=1400 audit(41.030:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=791 comm="apparmor_parser" [ 44.287679] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 44.362824] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.365871] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.499969] sungem_phy: PHY ID: 4061e4, addr: 0 [ 44.500335] gem 0002:20:0f.0 eth0: Found BCM5221 PHY [ 44.500798] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.503129] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready