Ubuntu
linux-source-2.6.22 package

no sound with Intel HDA 82801H (Gutsy Tribe 5, 2.6.22-10.30)

Bug #134789 reported by ntt
6
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Incomplete
Undecided
Unassigned
linux-source-2.6.22 (Ubuntu)
Won't Fix
Undecided
Unassigned

Bug Description

Gutsy Tribe 5 can't properly drive the soundcard of my laptop (HP DV6560EL, Intel HDA ICH8)

It didn't work with kernel 2.6.22-9, and now it doesn't even with the latest 2.6.22-10.30.

The laptop chipset is quite recent, so possibly this is related to oldish ALSA drivers in the kernel.

Please find below the required info:

========================================================================
Kubuntu Gutsy Tribe 5, kernel 2.6.22-10.30 on HP DV6560EL (T7300 "Santarosa")
========================================================================
uname -a

Linux hpavduo 2.6.22-10-generic #1 SMP Wed Aug 22 08:11:52 GMT 2007 i686 GNU/Linux
========================================================================
aplay -lL

default:CARD=Intel
    HDA Intel, HDA Generic
    Default Audio Device
front:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    Front speakers
surround40:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
    HDA Intel
    IEC958 (S/PDIF) Digital Audio Output
null
    Discard all samples (playback) or generate zero samples (capture)
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
========================================================================
sudo lspci -v

00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Root Port (rev 0c) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: cc000000-ceffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [88] Subsystem: Hewlett-Packard Company Unknown device 30cc
        Capabilities: [80] Power Management version 3
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at 1800 [size=32]

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 1820 [size=32]

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 03) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 21
        Memory at f8504800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, fast devsel, latency 0, IRQ 23
        Memory at f8500000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        Memory behind bridge: f8000000-f80fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 30cc
        Capabilities: [a0] Power Management version 2

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f4000000-f7ffffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 30cc
        Capabilities: [a0] Power Management version 2

00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: f8100000-f81fffff
        Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 30cc
        Capabilities: [a0] Power Management version 2

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 1840 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 1860 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at 1880 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 03) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 19
        Memory at f8504c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
        Memory behind bridge: f8200000-f82fffff
        Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 30cc

00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 18a0 [size=16]

00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 219
        I/O ports at 18d8 [size=8]
        I/O ports at 18cc [size=4]
        I/O ports at 18d0 [size=8]
        I/O ports at 18c8 [size=4]
        I/O ports at 18e0 [size=32]
        Memory at f8504000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+
        Capabilities: [70] Power Management version 3
        Capabilities: [a8] #12 [0010]

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: medium devsel, IRQ 10
        Memory at 88100000 (32-bit, non-prefetchable) [size=256]
        I/O ports at 1c00 [size=32]

01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0427 (rev a1) (prog-if 00 [VGA])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
        I/O ports at 2000 [size=128]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint IRQ 0

02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
        Subsystem: Hewlett-Packard Company Unknown device 135c
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0

06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller (rev 01)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, fast devsel, latency 0, IRQ 17
        I/O ports at 4000 [size=256]
        Memory at f8100000 (64-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at 88000000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2
        Capabilities: [48] Vital Product Data
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
        Capabilities: [60] Express Endpoint IRQ 0
        Capabilities: [84] Vendor Specific Information

07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (rev 05) (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 32, IRQ 22
        Memory at f8200000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [dc] Power Management version 2

07:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 32, IRQ 18
        Memory at f8200800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

07:09.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at f8200c00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

07:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at f8201000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

07:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at f8201400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
========================================================================
lspnp -v

lspnp: /proc/bus/pnp not available
========================================================================
tail -2 /proc/asound/oss/sndstat

Mixers:
0: Realtek ID 268
========================================================================
amixer

Simple mixer control 'Master',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 43 [67%] [-21.00dB]
  Front Right: Playback 43 [67%] [-21.00dB]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 248 [97%] [-1.40dB]
  Front Right: Playback 248 [97%] [-1.40dB]
========================================================================
sudo lspci -nvv

00:00.0 0600: 8086:2a00 (rev 0c)
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 0604: 8086:2a01 (rev 0c) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: cc000000-ceffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [88] Subsystem: 103c:30cc
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
                Address: fee0300c Data: 41b9
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise-
                Slot: Number 1, PowerLimit 75.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Off, PwrInd On, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-

00:1a.0 0c03: 8086:2834 (rev 03) (prog-if 00 [UHCI])
        Subsystem: 103c:30cc
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 1800 [size=32]

00:1a.1 0c03: 8086:2835 (rev 03) (prog-if 00 [UHCI])
        Subsystem: 103c:30cc
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 18
        Region 4: I/O ports at 1820 [size=32]

00:1a.7 0c03: 8086:283a (rev 03) (prog-if 20 [EHCI])
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 21
        Region 0: Memory at f8504800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1b.0 0403: 8086:284b (rev 03)
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f8500000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000 Data: 0000
        Capabilities: [70] Express Unknown type IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled CommClk- ExtSynch-
                Link: Speed unknown, Width x0

00:1c.0 0604: 8086:283f (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        Memory behind bridge: f8000000-f80fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, Port 1
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 2, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
                Address: fee0300c Data: 41c1
        Capabilities: [90] Subsystem: 103c:30cc
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 0604: 8086:2841 (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f4000000-f7ffffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
                Link: Latency L0s <1us, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x0
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 3, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
                Address: fee0300c Data: 41c9
        Capabilities: [90] Subsystem: 103c:30cc
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.5 0604: 8086:2849 (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: f8100000-f81fffff
        Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 6
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 3, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
                Address: fee0300c Data: 41d1
        Capabilities: [90] Subsystem: 103c:30cc
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 0c03: 8086:2830 (rev 03) (prog-if 00 [UHCI])
        Subsystem: 103c:30cc
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 19
        Region 4: I/O ports at 1840 [size=32]

00:1d.1 0c03: 8086:2831 (rev 03) (prog-if 00 [UHCI])
        Subsystem: 103c:30cc
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 20
        Region 4: I/O ports at 1860 [size=32]

00:1d.2 0c03: 8086:2832 (rev 03) (prog-if 00 [UHCI])
        Subsystem: 103c:30cc
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 21
        Region 4: I/O ports at 1880 [size=32]

00:1d.7 0c03: 8086:2836 (rev 03) (prog-if 20 [EHCI])
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f8504c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1e.0 0604: 8086:2448 (rev f3) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
        Memory behind bridge: f8200000-f82fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] Subsystem: 103c:30cc

00:1f.0 0601: 8086:2815 (rev 03)
        Subsystem: 103c:30cc
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:1f.1 0101: 8086:2850 (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: 103c:30cc
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 18a0 [size=16]

00:1f.2 0106: 8086:2829 (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: 103c:30cc
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 219
        Region 0: I/O ports at 18d8 [size=8]
        Region 1: I/O ports at 18cc [size=4]
        Region 2: I/O ports at 18d0 [size=8]
        Region 3: I/O ports at 18c8 [size=4]
        Region 4: I/O ports at 18e0 [size=32]
        Region 5: Memory at f8504000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+
                Address: fee0300c Data: 413a
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] #12 [0010]

00:1f.3 0c05: 8086:283e (rev 03)
        Subsystem: 103c:30cc
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 10
        Region 0: Memory at 88100000 (32-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 1c00 [size=32]

01:00.0 0300: 10de:0427 (rev a1) (prog-if 00 [VGA])
        Subsystem: 103c:30cc
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
        Region 5: I/O ports at 2000 [size=128]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000 Data: 0000
        Capabilities: [78] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <512ns, L1 <4us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
                Link: Latency L0s <512ns, L1 <4us
                Link: ASPM L0s L1 Enabled RCB 128 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x16

02:00.0 0280: 8086:4222 (rev 02)
        Subsystem: 103c:135c
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000 Data: 0000
        Capabilities: [e0] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <512ns, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <128ns, L1 <64us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1

06:00.0 0200: 10ec:8136 (rev 01)
        Subsystem: 103c:30cc
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: I/O ports at 4000 [size=256]
        Region 2: Memory at f8100000 (64-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at 88000000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Vital Product Data
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
                Address: 0000000000000000 Data: 0000
        Capabilities: [60] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <1us, L1 unlimited
                Device: AtnBtn+ AtnInd+ PwrInd+
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
                Link: Latency L0s unlimited, L1 unlimited
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [84] Vendor Specific Information

07:09.0 0c00: 1180:0832 (rev 05) (prog-if 10 [OHCI])
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at f8200000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME+

07:09.1 0805: 1180:0822 (rev 22)
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 18
        Region 0: Memory at f8200800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:09.2 0880: 1180:0843 (rev 12)
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at f8200c00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:09.3 0880: 1180:0592 (rev 12)
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at f8201000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:09.4 0880: 1180:0852 (rev 12)
        Subsystem: 103c:30cc
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at f8201400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
========================================================================
asoundconf list

Names of available sound cards:
Intel
========================================================================
cat /etc/asound.conf ~/.asoundrc*

cat: /etc/asound.conf: No such file or directory
cat: /home/crd/.asoundrc*: No such file or directory
========================================================================
dmesg

[ 0.000000] Linux version 2.6.22-10-generic (buildd@palmer) (gcc version 4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 SMP Wed Aug 22 08:11:52 GMT 2007 (Ubuntu 2.6.22-10.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f80e0
[ 0.000000] Entering add_active_range(0, 0, 523984) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523984
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523984
[ 0.000000] On node 0 totalpages: 523984
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 292307 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F8040, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7FED228E, 0084 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7FEDBC04, 00F4 (r3 HP 30CC 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 7FED364B, 8545 (r1 HP 30D2 6040000 INTL 20060707)
[ 0.000000] ACPI: FACS 7FEDEFC0, 0040
[ 0.000000] ACPI: APIC 7FEDBCF8, 0068 (r1 HP 30D2 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 7FEDBD60, 0038 (r1 HP 30D2 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7FEDBD98, 003C (r1 HP 30D2 6040000 LOHR 5A)
[ 0.000000] ACPI: TMOR 7FEDBDD4, 0026 (r1 HP 30CC 6040000 PTL 3)
[ 0.000000] ACPI: APIC 7FEDBDFA, 0068 (r1 HP 30D2 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FEDBE62, 0028 (r1 HP 30D2 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 7FEDBE8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 7FED336E, 02DD (r1 HP 30D2 1000 INTL 20060707)
[ 0.000000] ACPI: SSDT 7FED289E, 025F (r1 HP 30D2 3000 INTL 20060707)
[ 0.000000] ACPI: SSDT 7FED27F8, 00A6 (r1 HP 30D2 3000 INTL 20060707)
[ 0.000000] ACPI: SSDT 7FED2312, 04E6 (r1 HP 30D2 3000 INTL 20060707)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify <email address hidden>
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists. Total pages: 519891
[ 0.000000] Kernel command line: root=UUID=aa5bb6eb-a1db-4612-b737-31e0eab829cf ro
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1995.326 MHz processor.
[ 28.369670] Console: colour VGA+ 80x25
[ 28.375039] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 28.375385] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 28.446695] Memory: 2066476k/2095936k available (2010k kernel code, 28116k reserved, 917k data, 364k init, 1178432k highmem)
[ 28.446796] virtual kernel memory layout:
[ 28.446797] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 28.446797] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 28.446798] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 28.446799] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 28.446800] .init : 0xc03e1000 - 0xc043c000 ( 364 kB)
[ 28.446801] .data : 0xc02f69c6 - 0xc03dbe64 ( 917 kB)
[ 28.446801] .text : 0xc0100000 - 0xc02f69c6 (2010 kB)
[ 28.447412] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 28.447589] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 28.447802] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 28.448121] hpet0: 3 64-bit timers, 14318180 Hz
[ 28.529177] Calibrating delay using timer specific routine.. 3994.27 BogoMIPS (lpj=7988559)
[ 28.529345] Security Framework v1.0.0 initialized
[ 28.529425] SELinux: Disabled at boot.
[ 28.529510] Mount-cache hash table entries: 512
[ 28.529688] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 28.529694] monitor/mwait feature present.
[ 28.529771] using mwait in idle threads.
[ 28.529849] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 28.529986] CPU: L2 cache: 4096K
[ 28.530061] CPU: Physical Processor ID: 0
[ 28.530137] CPU: Processor Core ID: 0
[ 28.530211] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 28.530218] Compat vDSO mapped to ffffe000.
[ 28.530301] Checking 'hlt' instruction... OK.
[ 28.545326] SMP alternatives: switching to UP code
[ 28.545745] Early unpacking initramfs... done
[ 28.792170] ACPI: Core revision 20070126
[ 28.792285] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 28.798842] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 28.799060] SMP alternatives: switching to SMP code
[ 28.799202] Booting processor 1/1 eip 3000
[ 28.809685] Initializing CPU#1
[ 28.889013] Calibrating delay using timer specific routine.. 3990.44 BogoMIPS (lpj=7980889)
[ 28.889018] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 28.889022] monitor/mwait feature present.
[ 28.889025] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 28.889027] CPU: L2 cache: 4096K
[ 28.889028] CPU: Physical Processor ID: 0
[ 28.889030] CPU: Processor Core ID: 1
[ 28.889031] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 28.889757] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 28.890504] Total of 2 processors activated (7984.72 BogoMIPS).
[ 28.890749] ENABLING IO-APIC IRQs
[ 28.891013] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 29.037023] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 29.057161] Brought up 2 CPUs
[ 29.134376] migration_cost=43
[ 29.134683] Booting paravirtualized kernel on bare hardware
[ 29.134834] Time: 21:04:27 Date: 07/25/107
[ 29.134924] NET: Registered protocol family 16
[ 29.135066] EISA bus registered
[ 29.135144] ACPI: bus type pci registered
[ 29.135529] PCI: PCI BIOS revision 3.00 entry at 0xfde31, last bus=7
[ 29.135609] PCI: Using configuration type 1
[ 29.135682] Setting up standard PCI resources
[ 29.137592] ACPI: EC: Look up EC in DSDT
[ 29.138521] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 29.139686] ACPI: System BIOS is requesting _OSI(Linux)
[ 29.139765] ACPI: Please test with "acpi_osi=!Linux"
[ 29.139766] Please send dmidecode to <email address hidden>
[ 29.140836] ACPI: Interpreter enabled
[ 29.140915] ACPI: (supports S0 S3 S4 S5)
[ 29.141299] ACPI: Using IOAPIC for interrupt routing
[ 29.147609] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 29.147735] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.147823] PCI: Probing PCI hardware (bus 00)
[ 29.150077] PCI: Transparent bridge - 0000:00:1e.0
[ 29.150238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 29.150493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 29.150609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 29.150720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 29.150828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 29.150950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 29.159465] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 29.160354] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 29.161337] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 29.162225] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 29.163179] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 29.164134] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 29.165044] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 29.166001] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 29.166994] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.167081] pnp: PnP ACPI init
[ 29.167162] ACPI: bus type pnp registered
[ 29.169357] pnp: PnP ACPI: found 11 devices
[ 29.169433] ACPI: ACPI bus type pnp unregistered
[ 29.169513] PnPBIOS: Disabled by ACPI PNP
[ 29.169625] PCI: Using ACPI for IRQ routing
[ 29.169701] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 29.258727] NET: Registered protocol family 8
[ 29.258803] NET: Registered protocol family 20
[ 29.258917] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 29.259008] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 29.259098] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 29.259188] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 29.259282] pnp: 00:04: iomem range 0xfed00000-0xfed003ff

See original description
Revision history for this message
ntt (ntt) wrote : aplay -lL

aplay -lL

default:CARD=Intel
    HDA Intel, HDA Generic
    Default Audio Device
front:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    Front speakers
surround40:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
    HDA Intel
    IEC958 (S/PDIF) Digital Audio Output
null
    Discard all samples (playback) or generate zero samples (capture)
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

Revision history for this message
Infecto (infecto) wrote :

I have the same problem, 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)

Revision history for this message
Infecto (infecto) wrote :
Revision history for this message
Infecto (infecto) wrote :
Revision history for this message
depesz (depesz-gmail) wrote :

i have exactly the same problem in hp 6710b. what's more interesting is that with 2.6.22-9 (from gutsy-4 or -3) it worked fine.

my chip:
=> lspci -vvv | perl -ne 'print if /Audio/../^\s*$/'
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 30c0
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at e4804000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

=> aplay -lL
default:CARD=Intel
    HDA Intel, HDA Generic
    Default Audio Device
front:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    Front speakers
surround40:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
    HDA Intel, HDA Generic
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
    HDA Intel
    IEC958 (S/PDIF) Digital Audio Output
null
    Discard all samples (playback) or generate zero samples (capture)
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Revision history for this message
ntt (ntt) wrote :

I think we possibly have two different problems, here... my audio never worked, not with 2.6.22-9 nor with -10 (and definitely not with Feisty, which was the reason for me to try with Gutsy).

But I've read recent bug reports of some other people claiming broken audio after upgrading from 2.6.22-9 to -10.

The reason for my audio not working is probably related to a newer audio chip (I'm thinking to that "Realtek ID 268" I've got from tail -2 /proc/asound/oss/sndstat); well, newer than the related ALSA drivers, that is.

If you issue that command, do you get the same chip ID?

thanks

Revision history for this message
depesz (depesz-gmail) wrote :

different chip here:
=> cat /proc/asound/oss/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.14 emulation code)
Kernel: Linux xxx 2.6.22-10-generic #1 SMP Wed Aug 22 08:11:52 GMT 2007 i686
Config options: 0

Installed drivers:
Type 10: ALSA emulation

Card config:
HDA Intel at 0xe4804000 irq 16

Audio devices:
0: HDA Generic (DUPLEX)

Synth devices: NOT ENABLED IN CONFIG

Midi devices: NOT ENABLED IN CONFIG

Timers:
31: system timer

Mixers:
0: Analog Devices ID 1981

Revision history for this message
ntt (ntt) wrote : Re: [Bug 134789] Re: no sound with Intel HDA 82801H (Gutsy Tribe 5, 2.6.22-10.30)

On Tuesday 28 August 2007, Jonh Wendell wrote:
> *** This bug is a duplicate of bug 134146 ***
> https://bugs.launchpad.net/bugs/134146
>
> ** This bug has been marked a duplicate of bug 134146
> Intel HDA sound broken on kernel 2.6.22-10.30

Hi,

(sorry about the delay in replying)

I disagree: this bug is _not_ a duplicate of bug #134146.

The difference being that my audio hardware _never_ worked with Gutsy
(tried Tribe 4 and 5), whilst bug 134146 is basically reporting an
audio breakage when upgrading from kernel 2.6.22-9 to 2.6.22-10.

The reason for my audio not working is that the audio chipset Realtek
ALC268 (Intel HDA ICH8 family) is not supported by the latest ALSA
release yet.

It does work, though, with the ALSA development version (ALSA-HG) since
about mid-August.

At the moment there's a lot of confusion about Intel HDA audio problems
with Gutsy: most people reporting audio problems are actually using
chipsets based on the intel ICH7 family (which _is_ supported by ALSA),
while there's a growing number of people - like me - using the newest
ICH8 family, sporting that Realtek ALC268 chip, which unfortunately is
not officially supported by the ALSA drivers.

thanks

Revision history for this message
Andre Boogaards (aphb) wrote :

imo, the duplicate status is wrong, sound worked for me in Feisty, doesnt work in Gutsy (tried Tribe 5 and beta). snd-hda-intel driver simply is missing after a fresh install.

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
        Subsystem: ASUSTeK Computer Inc. Unknown device 8277
        Flags: bus master, fast devsel, latency 0, IRQ 15
        Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Unknown type IRQ 0

Revision history for this message
mccubbin.t (mccubbin-t) wrote :
Download full text (10.8 KiB)

this looks similar to my issues

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: cc000000-ceffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [88] Subsystem: Hewlett-Packard Company Unknown device 30cc
        Capabilities: [80] Power Management version 3
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at 1800 [size=32]

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at 1820 [size=32]

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, medium devsel, latency 0, IRQ 18
        Memory at f8504800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 30cc
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at f8500000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        Memory behind bridge: f8000000-f80fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 30cc
        Capabilities: [a0] Power Management version 2

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=05, s...

Revision history for this message
Launchpad Janitor (janitor) wrote : This bug is now reported against the 'linux' package

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this bug to the new "linux" package. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.