[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=49401344-da58-47e2-a75f-65c8011112c4 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b88fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b88ff000-0x00000000b9c7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9c7f000-0x00000000b9f70fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9f71000-0x00000000b9f7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9f7f000-0x00000000b9ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 6470b/179C, BIOS 68ICE Ver. F.43 07/16/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23fc00000-0x23fdfffff] [ 0.000000] [mem 0x23fc00000-0x23fdfffff] page 2M [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fbfffff] [ 0.000000] [mem 0x23c000000-0x23fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xb88fefff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xb87fffff] page 2M [ 0.000000] [mem 0xb8800000-0xb88fefff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb9c7f000-0xb9f70fff] [ 0.000000] [mem 0xb9c7f000-0xb9f70fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb9fff000-0xb9ffffff] [ 0.000000] [mem 0xb9fff000-0xb9ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x34a4a000-0x3651cfff] [ 0.000000] ACPI: RSDP 00000000000f2f10 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000b9ffe120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 00000000b9ffc000 00010C (v05 HPQOEM 179C 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 00000000b9fd3000 0230C1 (v02 HPQOEM 179C 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 00000000b9c34000 000040 [ 0.000000] ACPI: HPET 00000000b9ffb000 000038 (v01 HPQOEM 179C 00000001 HP 00000001) [ 0.000000] ACPI: APIC 00000000b9ffa000 0000BC (v01 HPQOEM 179C 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 00000000b9ff9000 00003C (v01 HPQOEM 179C 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 00000000b9ff8000 0000A5 (v32 HPQOEM 179C 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 00000000b9ff7000 000032 (v02 HPQOEM 179C 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 00000000b9fd0000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 00000000b9fcf000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: SLIC 00000000b9fce000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FPDT 00000000b9fcc000 000044 (v01 HPQOEM 179C 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 00000000b9fcb000 000038 (v00 HPQOEM 179C 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 00000000b9fca000 0009B6 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 00000000b9fc9000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fdfffff] [ 0.000000] NODE_DATA [mem 0x23fdf3000-0x23fdf7fff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xb88fefff] [ 0.000000] node 0: [mem 0xb9c7f000-0xb9f70fff] [ 0.000000] node 0: [mem 0xb9fff000-0xb9ffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fdfffff] [ 0.000000] On node 0 totalpages: 2066317 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11752 pages used for memmap [ 0.000000] DMA32 zone: 752113 pages, LIFO batch:31 [ 0.000000] Normal zone: 20472 pages used for memmap [ 0.000000] Normal zone: 1310208 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb88ff000-0xb9c7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9f71000-0xb9f7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9f7f000-0xb9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023fa00000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034008 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=49401344-da58-47e2-a75f-65c8011112c4 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8023092K/8265268K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 242176K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.008000] tsc: PIT calibration matches HPET. 1 loops [ 0.008000] tsc: Detected 2693.589 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.17 BogoMIPS (lpj=10774356) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000024] Security Framework initialized [ 0.000040] AppArmor: AppArmor initialized [ 0.000041] Yama: becoming mindful. [ 0.000529] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002381] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003223] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003232] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003410] Initializing cgroup subsys memory [ 0.003415] Initializing cgroup subsys devices [ 0.003416] Initializing cgroup subsys freezer [ 0.003418] Initializing cgroup subsys blkio [ 0.003419] Initializing cgroup subsys perf_event [ 0.003421] Initializing cgroup subsys hugetlb [ 0.003440] CPU: Physical Processor ID: 0 [ 0.003441] CPU: Processor Core ID: 0 [ 0.003445] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003445] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003774] mce: CPU supports 7 MCE banks [ 0.003784] CPU0: Thermal monitoring enabled (TM1) [ 0.003793] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003793] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003793] tlb_flushall_shift: 2 [ 0.003905] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000) [ 0.004971] ACPI: Core revision 20131115 [ 0.011243] ACPI: All ACPI Tables successfully acquired [ 0.063523] ftrace: allocating 28408 entries in 111 pages [ 0.076229] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.115897] smpboot: CPU0: Intel(R) Core(TM) i5-3340M CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09) [ 0.115905] TSC deadline timer enabled [ 0.117896] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.117902] ... version: 3 [ 0.117903] ... bit width: 48 [ 0.117904] ... generic registers: 4 [ 0.117905] ... value mask: 0000ffffffffffff [ 0.117906] ... max period: 0000ffffffffffff [ 0.117907] ... fixed-purpose events: 3 [ 0.117908] ... event mask: 000000070000000f [ 0.119323] x86: Booting SMP configuration: [ 0.132835] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.119325] .... node #0, CPUs: #1 #2 #3 [ 0.159869] x86: Booted up 1 node, 4 CPUs [ 0.159872] smpboot: Total of 4 processors activated (21548.71 BogoMIPS) [ 0.162844] devtmpfs: initialized [ 0.165090] EVM: security.selinux [ 0.165091] EVM: security.SMACK64 [ 0.165092] EVM: security.ima [ 0.165092] EVM: security.capability [ 0.165132] PM: Registering ACPI NVS region [mem 0xb9f71000-0xb9f7efff] (57344 bytes) [ 0.165787] pinctrl core: initialized pinctrl subsystem [ 0.165833] regulator-dummy: no parameters [ 0.165863] RTC time: 6:29:31, date: 04/25/14 [ 0.165889] NET: Registered protocol family 16 [ 0.165972] cpuidle: using governor ladder [ 0.165973] cpuidle: using governor menu [ 0.166003] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.166005] ACPI: bus type PCI registered [ 0.166006] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.166056] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.166059] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.188506] PCI: Using configuration type 1 for base access [ 0.188653] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.188654] mtrr: probably your BIOS does not setup all CPUs. [ 0.188655] mtrr: corrected configuration. [ 0.189227] bio: create slab at 0 [ 0.189346] ACPI: Added _OSI(Module Device) [ 0.189348] ACPI: Added _OSI(Processor Device) [ 0.189349] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.189350] ACPI: Added _OSI(Processor Aggregator Device) [ 0.193214] ACPI: Executed 1 blocks of module-level executable AML code [ 0.199899] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.224684] ACPI: SSDT 00000000b9c32018 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.225132] ACPI: Dynamic OEM Table Load: [ 0.225134] ACPI: SSDT (null) 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.228086] ACPI: SSDT 00000000b9c33a98 000303 (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.228556] ACPI: Dynamic OEM Table Load: [ 0.228558] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.231979] ACPI: SSDT 00000000b9c31d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.232421] ACPI: Dynamic OEM Table Load: [ 0.232423] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.680231] ACPI: Interpreter enabled [ 0.680237] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.680241] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.680253] ACPI: (supports S0 S3 S4 S5) [ 0.680254] ACPI: Using IOAPIC for interrupt routing [ 0.680274] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.680426] ACPI: No dock devices found. [ 0.682296] ACPI: Power Resource [APPR] (off) [ 0.684678] ACPI: Power Resource [COMP] (on) [ 0.685005] ACPI: Power Resource [LPP] (on) [ 0.687972] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.687977] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.689253] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.689808] PCI host bridge to bus 0000:00 [ 0.689811] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.689812] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.689814] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.689815] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.689817] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff] [ 0.689818] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff] [ 0.689819] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 0.689826] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.689898] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.689909] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit] [ 0.689915] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.689920] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.690009] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.690029] pci 0000:00:14.0: reg 0x10: [mem 0xd4720000-0xd472ffff 64bit] [ 0.690090] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.690127] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.690156] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.690178] pci 0000:00:16.0: reg 0x10: [mem 0xd4734000-0xd473400f 64bit] [ 0.690254] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.690321] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.690339] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff] [ 0.690348] pci 0000:00:19.0: reg 0x14: [mem 0xd473a000-0xd473afff] [ 0.690356] pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f] [ 0.690419] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.690455] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.690484] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.690505] pci 0000:00:1a.0: reg 0x10: [mem 0xd4739000-0xd47393ff] [ 0.690594] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.690632] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.690661] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.690680] pci 0000:00:1b.0: reg 0x10: [mem 0xd4730000-0xd4733fff 64bit] [ 0.690747] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.690809] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.690888] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.690950] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.691027] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.691069] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.691094] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.691171] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.691212] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.691235] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.691313] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.691353] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.691385] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.691407] pci 0000:00:1d.0: reg 0x10: [mem 0xd4738000-0xd47383ff] [ 0.691496] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.691535] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.691561] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.691719] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.691737] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.691745] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.691753] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.691761] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.691769] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f] [ 0.691777] pci 0000:00:1f.2: reg 0x24: [mem 0xd4737000-0xd47377ff] [ 0.691822] pci 0000:00:1f.2: PME# supported from D3hot [ 0.691926] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.691932] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 0.692017] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.692021] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 0.692025] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.692153] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010 [ 0.692186] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff] [ 0.692209] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff] [ 0.692496] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000 [ 0.692524] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff] [ 0.692638] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref] [ 0.692802] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501 [ 0.692830] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff] [ 0.702733] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.702745] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 0.702995] pci 0000:24:00.0: [8086:0082] type 00 class 0x028000 [ 0.703144] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit] [ 0.703865] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold [ 0.704032] pci 0000:24:00.0: System wakeup disabled by ACPI [ 0.714817] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.714823] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 0.714885] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.715665] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.715708] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.715749] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.715789] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.715828] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.715868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.715907] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.715946] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.716322] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.716329] ACPI: \_SB_.PCI0: notify handler is installed [ 0.716388] Found 1 acpi root devices [ 0.716425] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.716502] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.716505] vgaarb: loaded [ 0.716506] vgaarb: bridge control possible 0000:00:02.0 [ 0.716631] SCSI subsystem initialized [ 0.716678] libata version 3.00 loaded. [ 0.716692] ACPI: bus type USB registered [ 0.716705] usbcore: registered new interface driver usbfs [ 0.716710] usbcore: registered new interface driver hub [ 0.716728] usbcore: registered new device driver usb [ 0.716809] PCI: Using ACPI for IRQ routing [ 0.723273] PCI: pci_cache_line_size set to 64 bytes [ 0.723334] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.723336] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.723337] e820: reserve RAM buffer [mem 0xb88ff000-0xbbffffff] [ 0.723338] e820: reserve RAM buffer [mem 0xb9f71000-0xbbffffff] [ 0.723340] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 0.723341] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff] [ 0.723407] NetLabel: Initializing [ 0.723408] NetLabel: domain hash size = 128 [ 0.723409] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.723419] NetLabel: unlabeled traffic allowed by default [ 0.723465] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.723469] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.725497] Switched to clocksource hpet [ 0.729354] AppArmor: AppArmor Filesystem Enabled [ 0.729375] pnp: PnP ACPI init [ 0.729386] ACPI: bus type PNP registered [ 0.729545] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.729548] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 0.729550] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.729551] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.729553] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.729555] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.729556] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.729558] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.729559] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.729562] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.729641] pnp 00:01: [dma 4] [ 0.729658] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.729675] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.729725] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.729797] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.729825] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.729856] system 00:06: [io 0x0200-0x027f] has been reserved [ 0.729858] system 00:06: [io 0x1000-0x100f] has been reserved [ 0.729859] system 00:06: [io 0xffff] has been reserved [ 0.729861] system 00:06: [io 0xffff] has been reserved [ 0.729862] system 00:06: [io 0x0400-0x047f] could not be reserved [ 0.729864] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.729865] system 00:06: [io 0xef80-0xef9f] has been reserved [ 0.729867] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.729889] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.730196] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.730442] pnp 00:09: [dma 0 disabled] [ 0.730496] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.730518] pnp 00:0a: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.730541] pnp 00:0b: Plug and Play ACPI device, IDs SYN018e SYN0100 SYN0002 PNP0f13 (active) [ 0.730723] pnp 00:0c: Plug and Play ACPI device, IDs HPQ6000 (active) [ 0.730773] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved [ 0.730775] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved [ 0.730777] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.730939] pnp: PnP ACPI: found 14 devices [ 0.730940] ACPI: bus type PNP unregistered [ 0.736894] pci 0000:23:00.1: no compatible bridge window for [mem 0xffff8000-0xffffffff pref] [ 0.736915] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 [ 0.736934] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.736938] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.736940] pci 0000:00:1c.2: BAR 15: assigned [mem 0xbf400000-0xbf4fffff pref] [ 0.736942] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.736947] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 0.736956] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.736959] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 0.736964] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.736968] pci 0000:00:1c.1: bridge window [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.736975] pci 0000:23:00.1: BAR 6: assigned [mem 0xbf400000-0xbf407fff pref] [ 0.736977] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.736982] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 0.736986] pci 0000:00:1c.2: bridge window [mem 0xbf400000-0xbf4fffff pref] [ 0.736992] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.736997] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 0.737006] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.737008] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.737009] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.737010] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff] [ 0.737012] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff] [ 0.737013] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff] [ 0.737015] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff] [ 0.737017] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] [ 0.737018] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff] [ 0.737019] pci_bus 0000:02: resource 2 [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.737021] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff] [ 0.737022] pci_bus 0000:23: resource 2 [mem 0xbf400000-0xbf4fffff pref] [ 0.737024] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff] [ 0.737047] NET: Registered protocol family 2 [ 0.737190] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.737323] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.737439] TCP: Hash tables configured (established 65536 bind 65536) [ 0.737455] TCP: reno registered [ 0.737465] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.737501] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.737563] NET: Registered protocol family 1 [ 0.737572] pci 0000:00:02.0: Boot video device [ 0.737580] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 0.737682] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.737684] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10 [ 0.737808] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.738201] PCI: CLS 64 bytes, default 64 [ 0.738256] Trying to unpack rootfs image as initramfs... [ 1.111242] Freeing initrd memory: 27468K (ffff880034a4a000 - ffff88003651d000) [ 1.111247] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.111249] software IO TLB [mem 0xb48ff000-0xb88ff000] (64MB) mapped at [ffff8800b48ff000-ffff8800b88fefff] [ 1.111451] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x16 [ 1.111457] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x16 [ 1.111465] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x16 [ 1.111472] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x16 [ 1.111515] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.111517] Scanning for low memory corruption every 60 seconds [ 1.111738] Initialise system trusted keyring [ 1.111771] audit: initializing netlink socket (disabled) [ 1.111779] type=2000 audit(1398407372.060:1): initialized [ 1.134939] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.135938] VFS: Disk quotas dquot_6.5.2 [ 1.135968] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.136276] fuse init (API version 7.22) [ 1.136332] msgmni has been set to 15723 [ 1.136371] Key type big_key registered [ 1.136742] Key type asymmetric registered [ 1.136744] Asymmetric key parser 'x509' registered [ 1.136767] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.136799] io scheduler noop registered [ 1.136800] io scheduler deadline registered (default) [ 1.136818] io scheduler cfq registered [ 1.137022] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 1.137194] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 1.137360] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 1.137535] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 1.137613] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.137617] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.137633] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 1.137637] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 1.137653] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 1.137654] pci 0000:23:00.0: Signaling PME through PCIe PME interrupt [ 1.137656] pci 0000:23:00.1: Signaling PME through PCIe PME interrupt [ 1.137657] pci 0000:23:00.2: Signaling PME through PCIe PME interrupt [ 1.137661] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 1.137678] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 1.137679] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt [ 1.137683] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 1.137692] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.137726] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 1e12 ss_vid 103c ss_did 179c [ 1.137756] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 1.137759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.137787] vesafb: mode is 1680x1050x32, linelength=6720, pages=0 [ 1.137788] vesafb: scrolling: redraw [ 1.137790] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.138405] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010f00000, using 6912k, total 6912k [ 1.243327] Console: switching to colour frame buffer device 210x65 [ 1.347701] fb0: VESA VGA frame buffer device [ 1.347716] intel_idle: MWAIT substates: 0x21120 [ 1.347717] intel_idle: v0.4 model 0x3A [ 1.347718] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.347799] ipmi message handler version 39.2 [ 1.347950] ACPI: AC Adapter [AC] (on-line) [ 1.348102] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 1.348106] ACPI: Sleep Button [SLPB] [ 1.348129] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.348147] ACPI: Lid Switch [LID] [ 1.348172] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.348175] ACPI: Power Button [PWRF] [ 1.372099] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.372101] ACPI: Thermal Zone [CPUZ] (46 C) [ 1.397088] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.397090] ACPI: Thermal Zone [GFXZ] (0 C) [ 1.412005] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.412008] ACPI: Thermal Zone [EXTZ] (45 C) [ 1.431971] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.431974] ACPI: Thermal Zone [LOCZ] (40 C) [ 1.447005] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.447008] ACPI: Thermal Zone [BATZ] (30 C) [ 1.447280] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.447282] ACPI: Thermal Zone [PCHZ] (127 C) [ 1.447354] thermal LNXTHERM:06: registered as thermal_zone6 [ 1.447356] ACPI: Thermal Zone [DM1Z] (0 C) [ 1.447423] thermal LNXTHERM:07: registered as thermal_zone7 [ 1.447424] ACPI: Thermal Zone [DM2Z] (0 C) [ 1.447447] GHES: HEST is not enabled! [ 1.447524] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.468239] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.469655] Linux agpgart interface v0.103 [ 1.469739] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16) [ 1.492065] ACPI: Battery Slot [BAT0] (battery present) [ 1.492107] ACPI: Battery Slot [BAT1] (battery absent) [ 1.709265] tpm_tis 00:03: TPM is disabled/deactivated (0x7) [ 1.710771] brd: module loaded [ 1.711269] loop: module loaded [ 1.711515] libphy: Fixed MDIO Bus: probed [ 1.711570] tun: Universal TUN/TAP device driver, 1.6 [ 1.711571] tun: (C) 1999-2004 Max Krasnyansky [ 1.711610] PPP generic driver version 2.4.2 [ 1.711643] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.711646] ehci-pci: EHCI PCI platform driver [ 1.711778] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.711782] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.711795] ehci-pci 0000:00:1a.0: debug port 2 [ 1.715699] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.715715] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4739000 [ 1.725191] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.725227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.725229] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.725230] usb usb1: Product: EHCI Host Controller [ 1.725232] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 1.725233] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.725318] hub 1-0:1.0: USB hub found [ 1.725325] hub 1-0:1.0: 2 ports detected [ 1.725521] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.725525] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.725536] ehci-pci 0000:00:1d.0: debug port 2 [ 1.729426] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.729430] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4738000 [ 1.741186] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.741213] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.741214] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.741215] usb usb2: Product: EHCI Host Controller [ 1.741217] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 1.741218] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.741330] hub 2-0:1.0: USB hub found [ 1.741337] hub 2-0:1.0: 2 ports detected [ 1.741422] ehci-platform: EHCI generic platform driver [ 1.741428] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.741430] ohci-pci: OHCI PCI platform driver [ 1.741436] ohci-platform: OHCI generic platform driver [ 1.741440] uhci_hcd: USB Universal Host Controller Interface driver [ 1.741538] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.741540] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10 [ 1.741563] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.741567] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.741657] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.741677] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X [ 1.741734] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.741736] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.741737] usb usb3: Product: xHCI Host Controller [ 1.741738] usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd [ 1.741740] usb usb3: SerialNumber: 0000:00:14.0 [ 1.741841] hub 3-0:1.0: USB hub found [ 1.741850] hub 3-0:1.0: 4 ports detected [ 1.742102] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.742105] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.742149] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.742150] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.742152] usb usb4: Product: xHCI Host Controller [ 1.742153] usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd [ 1.742154] usb usb4: SerialNumber: 0000:00:14.0 [ 1.742250] hub 4-0:1.0: USB hub found [ 1.742259] hub 4-0:1.0: 4 ports detected [ 1.749322] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.751144] i8042: Detected active multiplexing controller, rev 1.1 [ 1.751852] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.751861] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.751878] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.751889] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.751902] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.752096] mousedev: PS/2 mouse device common for all mice [ 1.752354] rtc_cmos 00:07: RTC can wake from S4 [ 1.752509] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.752537] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.752580] device-mapper: uevent: version 1.0.3 [ 1.752653] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.752659] ledtrig-cpu: registered to indicate activity on CPUs [ 1.752734] TCP: cubic registered [ 1.752791] NET: Registered protocol family 10 [ 1.752920] NET: Registered protocol family 17 [ 1.752928] Key type dns_resolver registered [ 1.753238] Loading compiled-in X.509 certificates [ 1.753979] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431' [ 1.753992] registered taskstats version 1 [ 1.756179] Key type trusted registered [ 1.757806] Key type encrypted registered [ 1.759465] AppArmor: AppArmor sha1 policy hashing enabled [ 1.778407] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.805234] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value [ 1.805237] IMA: No TPM chip found, activating TPM-bypass! [ 1.805560] regulator-dummy: disabling [ 1.805624] Magic number: 10:426:469 [ 1.805736] rtc_cmos 00:07: setting system clock to 2014-04-25 06:29:33 UTC (1398407373) [ 1.806307] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.806308] EDD information not available. [ 1.806341] PM: Hibernation image not present or could not be loaded. [ 1.807077] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000) [ 1.807079] Write protecting the kernel read-only data: 12288k [ 1.808906] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000) [ 1.810450] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000) [ 1.822775] systemd-udevd[124]: starting version 204 [ 1.846621] wmi: Mapper loaded [ 1.849883] [drm] Initialized drm 1.1.0 20060810 [ 1.851036] pps_core: LinuxPPS API ver. 1 registered [ 1.851038] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.852636] PTP clock support registered [ 1.855457] ahci 0000:00:1f.2: version 3.0 [ 1.855669] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.855706] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.859933] sdhci: Secure Digital Host Controller Interface driver [ 1.859936] sdhci: Copyright(c) Pierre Ossman [ 1.869180] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode [ 1.869186] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.873166] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.873170] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.901852] scsi0 : ahci [ 1.901939] scsi1 : ahci [ 1.902005] scsi2 : ahci [ 1.902069] scsi3 : ahci [ 1.902151] scsi4 : ahci [ 1.902217] scsi5 : ahci [ 1.902249] ata1: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737100 irq 45 [ 1.902251] ata2: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737180 irq 45 [ 1.902252] ata3: DUMMY [ 1.902255] ata4: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737280 irq 45 [ 1.902258] ata5: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737300 irq 45 [ 1.902261] ata6: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737380 irq 45 [ 1.902529] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.902550] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 1.917180] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 1.917239] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30) [ 1.917333] sdhci-pci 0000:23:00.1: dummy supplies not allowed [ 1.917334] mmc0: no vqmmc regulator found [ 1.917336] sdhci-pci 0000:23:00.1: dummy supplies not allowed [ 1.917336] mmc0: no vmmc regulator found [ 1.917390] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA [ 1.917402] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30) [ 1.917448] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface. [ 1.953411] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.969720] usb 4-1: New USB device found, idVendor=0424, idProduct=5434 [ 1.969723] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.969725] usb 4-1: Product: USB5534 [ 1.969726] usb 4-1: Manufacturer: SMSC [ 1.969727] usb 4-1: SerialNumber: 1239567 [ 1.971442] hub 4-1:1.0: USB hub found [ 1.971481] hub 4-1:1.0: 4 ports detected [ 2.081171] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.109101] tsc: Refined TSC clocksource calibration: 2693.880 MHz [ 2.168258] e1000e 0000:00:19.0 eth0: registered PHC clock [ 2.168261] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 9c:b6:54:a3:3d:02 [ 2.168263] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.168297] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 2.169204] [drm] Memory usable by graphics device = 2048M [ 2.169208] checking generic (c0000000 6c0000) vs hw (c0000000 10000000) [ 2.169209] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 2.169221] Console: switching to colour dummy device 80x25 [ 2.213518] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.213526] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.213929] hub 1-1:1.0: USB hub found [ 2.213985] hub 1-1:1.0: 6 ports detected [ 2.217125] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 2.217136] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.217137] [drm] Driver supports precise vblank timestamp query. [ 2.217221] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.221092] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.221295] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.221364] ata1.00: ATA-8: LITEONIT LCS-128M6S-HP, DC71704, max UDMA/133 [ 2.221366] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.221626] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.221729] ata1.00: configured for UDMA/133 [ 2.229228] scsi 0:0:0:0: Direct-Access ATA LITEONIT LCS-128 DC71 PQ: 0 ANSI: 5 [ 2.229341] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.229347] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.229411] sd 0:0:0:0: [sda] Write Protect is off [ 2.229414] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.229445] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.230254] sda: sda1 sda2 < sda5 sda6 > [ 2.230615] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.325010] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.334785] fbcon: inteldrmfb (fb0) is primary device [ 2.417211] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400 [ 2.457446] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.457449] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.457719] hub 2-1:1.0: USB hub found [ 2.457791] hub 2-1:1.0: 6 ports detected [ 2.549027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.553740] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.553759] ata2.00: ATAPI: hp DVD A DS8A9SH, EH62, max UDMA/100 [ 2.560499] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.560510] ata2.00: configured for UDMA/100 [ 2.573328] scsi 1:0:0:0: CD-ROM hp DVD A DS8A9SH EH62 PQ: 0 ANSI: 5 [ 2.587698] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.587700] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.587896] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.588059] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.625040] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 2.641276] usb 3-1: New USB device found, idVendor=0424, idProduct=5434 [ 2.641277] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.641560] hub 3-1:1.0: USB hub found [ 2.641599] hub 3-1:1.0: 4 ports detected [ 2.693097] fbcon_init: detected unhandled fb_set_par error, error code -22 [ 2.693102] Console: switching to colour frame buffer device 200x56 [ 2.696160] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.696161] i915 0000:00:02.0: registered panic notifier [ 2.697797] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.701582] acpi device:0c: registered as cooling_device4 [ 2.701695] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8 [ 2.701785] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.808971] usb 3-4: new low-speed USB device number 3 using xhci_hcd [ 2.829316] usb 3-4: New USB device found, idVendor=413c, idProduct=3012 [ 2.829320] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.829322] usb 3-4: Product: Dell USB Optical Mouse [ 2.829323] usb 3-4: Manufacturer: Dell [ 2.829490] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.832352] hidraw: raw HID events driver (C) Jiri Kosina [ 2.835346] usbcore: registered new interface driver usbhid [ 2.835348] usbhid: USB HID core driver [ 2.836516] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input9 [ 2.836616] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:14.0-4/input0 [ 2.901063] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.904907] ata4: SATA link down (SStatus 0 SControl 300) [ 2.994659] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d [ 2.994667] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.994671] usb 1-1.1: SerialNumber: 00b00e3c8391 [ 3.065004] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 3.109066] Switched to clocksource tsc [ 3.224803] ata5: SATA link down (SStatus 0 SControl 300) [ 3.291460] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b270 [ 3.291467] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.291472] usb 1-1.3: Product: HP HD Webcam [Fixed] [ 3.291484] usb 1-1.3: Manufacturer: Chicony [ 3.544680] ata6: SATA link down (SStatus 0 SControl 300) [ 3.596654] usb 2-1.6: new full-speed USB device number 3 using ehci-pci [ 3.696490] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1 [ 3.696493] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.696495] usb 2-1.6: Product: BCM20702A0 [ 3.696496] usb 2-1.6: Manufacturer: Broadcom Corp [ 3.696497] usb 2-1.6: SerialNumber: 3C77E6CC25E0 [ 3.768561] usb 3-1.1: new full-speed USB device number 4 using xhci_hcd [ 3.785674] usb 3-1.1: New USB device found, idVendor=413c, idProduct=1005 [ 3.785679] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.785682] usb 3-1.1: Product: Dell Multimedia Pro Keyboard Hub [ 3.785684] usb 3-1.1: Manufacturer: Dell [ 3.785809] usb 3-1.1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 3.786606] hub 3-1.1:1.0: USB hub found [ 3.786788] hub 3-1.1:1.0: 3 ports detected [ 3.864930] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 4.056543] usb 3-1.1.1: new low-speed USB device number 5 using xhci_hcd [ 4.080049] usb 3-1.1.1: New USB device found, idVendor=413c, idProduct=2011 [ 4.080051] usb 3-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.080053] usb 3-1.1.1: Product: Dell Multimedia Pro Keyboard [ 4.080055] usb 3-1.1.1: Manufacturer: Dell [ 4.080190] usb 3-1.1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 4.080193] usb 3-1.1.1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 4.086209] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.1/3-1.1.1:1.0/input/input10 [ 4.086286] hid-generic 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:14.0-1.1.1/input0 [ 4.094598] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.1/3-1.1.1:1.1/input/input11 [ 4.094673] hid-generic 0003:413C:2011.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:14.0-1.1.1/input1 [ 8.816620] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 8.816626] EXT4-fs (sda1): write access will be enabled during recovery [ 8.876646] random: nonblocking pool is initialized [ 8.927596] EXT4-fs (sda1): orphan cleanup on readonly fs [ 8.927722] EXT4-fs (sda1): 1 orphan inode deleted [ 8.927724] EXT4-fs (sda1): recovery complete [ 8.932897] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.151484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.205529] systemd-udevd[353]: starting version 204 [ 9.250420] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 9.250456] lp: driver loaded but no devices found [ 9.271943] ppdev: user-space parallel port driver [ 9.275556] parport_pc 00:09: reported by Plug and Play ACPI [ 9.275635] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 9.293077] hp_accel: hardware type HPB64xx found [ 9.293644] lis3lv02d: 8 bits 3DC sensor found [ 9.330874] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12 [ 9.355425] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X [ 9.366357] cfg80211: Calling CRDA to update world regulatory domain [ 9.371269] lp0: using parport0 (interrupt-driven). [ 9.375568] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 9.375589] Copyright(c) 2003-2013 Intel Corporation [ 9.375689] iwlwifi 0000:24:00.0: can't disable ASPM; OS doesn't have ASPM control [ 9.375750] iwlwifi 0000:24:00.0: irq 49 for MSI/MSI-X [ 9.381463] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 9.389722] iwlwifi 0000:24:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 9.418189] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 9.418197] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.418201] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 9.418205] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.418206] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 9.418210] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.418212] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.428546] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 9.428550] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 9.428553] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 9.428555] iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 9.428614] iwlwifi 0000:24:00.0: L1 Disabled; Enabling L0S [ 9.434450] FS-Cache: Loaded [ 9.435250] type=1400 audit(1398407381.128:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=480 comm="apparmor_parser" [ 9.435258] type=1400 audit(1398407381.128:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser" [ 9.435263] type=1400 audit(1398407381.128:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser" [ 9.435685] type=1400 audit(1398407381.128:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser" [ 9.435691] type=1400 audit(1398407381.128:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser" [ 9.435915] type=1400 audit(1398407381.128:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser" [ 9.446718] FS-Cache: Netfs 'cifs' registered for caching [ 9.446808] Key type cifs.spnego registered [ 9.446815] Key type cifs.idmap registered [ 9.451094] CIFS VFS: Error connecting to socket. Aborting operation. [ 9.451151] CIFS VFS: cifs_mount failed w/return code = -101 [ 9.453352] Linux video capture interface: v2.00 [ 9.482050] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 9.519420] Bluetooth: Core ver 2.17 [ 9.519573] NET: Registered protocol family 31 [ 9.519575] Bluetooth: HCI device and connection manager initialized [ 9.519583] Bluetooth: HCI socket layer initialized [ 9.519586] Bluetooth: L2CAP socket layer initialized [ 9.519591] Bluetooth: SCO socket layer initialized [ 9.535428] usbcore: registered new interface driver btusb [ 9.567988] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b270) [ 9.626023] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14 [ 9.626355] usbcore: registered new interface driver uvcvideo [ 9.626357] USB Video Class driver (1.1.1) [ 9.643565] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.643568] Bluetooth: BNEP filters: protocol multicast [ 9.643577] Bluetooth: BNEP socket layer initialized [ 9.651513] CIFS VFS: Error connecting to socket. Aborting operation. [ 9.651562] Bluetooth: RFCOMM TTY layer initialized [ 9.651571] Bluetooth: RFCOMM socket layer initialized [ 9.651576] Bluetooth: RFCOMM ver 1.11 [ 9.661506] CIFS VFS: cifs_mount failed w/return code = -101 [ 9.674049] kvm: disabled by bios [ 9.735183] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 9.740457] CIFS VFS: Error connecting to socket. Aborting operation. [ 9.740533] CIFS VFS: cifs_mount failed w/return code = -101 [ 9.745826] kvm: disabled by bios [ 9.749139] type=1400 audit(1398407381.440:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=758 comm="apparmor_parser" [ 9.749149] type=1400 audit(1398407381.440:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=758 comm="apparmor_parser" [ 9.749709] type=1400 audit(1398407381.440:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=758 comm="apparmor_parser" [ 9.770420] mute LED gpio 1 polarity 0 [ 9.770839] autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 9.770843] speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 9.770845] hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 9.770846] mono: mono_out=0x0 [ 9.770847] inputs: [ 9.770849] Mic=0xc [ 9.770851] Internal Mic=0x11 [ 9.770852] Line=0xf [ 9.775732] init: cups main process (761) killed by HUP signal [ 9.775750] init: cups main process ended, respawning [ 9.779138] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 9.779142] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.779143] hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.779145] mono: mono_out=0x0 [ 9.779146] inputs: [ 9.800901] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 9.800974] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 9.801038] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 9.801103] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 9.801170] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 9.801238] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 9.801298] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 9.817033] cfg80211: World regulatory domain updated: [ 9.817036] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.817037] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.817039] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.817040] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.817041] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.817042] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.874605] intel_rapl: domain uncore energy ctr 181104:181104 not working, skip [ 9.906339] init: Failed to spawn smbd main process: unable to execute: No such file or directory [ 9.912413] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 9.959746] init: failsafe main process (828) killed by TERM signal [ 10.000605] input: HP WMI hotkeys as /devices/virtual/input/input22 [ 10.020943] CIFS VFS: Error connecting to socket. Aborting operation. [ 10.021011] CIFS VFS: cifs_mount failed w/return code = -101 [ 10.121114] type=1400 audit(1398407381.812:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=998 comm="apparmor_parser" [ 10.250640] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 10.354494] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 10.354611] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.354961] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.357001] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.583763] init: plymouth-upstart-bridge main process ended, respawning [ 10.601951] init: plymouth-upstart-bridge main process (1341) terminated with status 1 [ 10.601964] init: plymouth-upstart-bridge main process ended, respawning [ 10.662305] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input13 [ 10.669917] bio: create slab at 1 [ 10.742311] Adding 7845884k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:7845884k SSFS [ 10.758323] CIFS VFS: Error connecting to socket. Aborting operation. [ 10.758428] CIFS VFS: cifs_mount failed w/return code = -101 [ 11.549448] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400, board id: 1623, fw id: 753753 [ 11.593056] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input25 [ 13.245256] PM: Syncing filesystems ... done. [ 13.251912] PM: Preparing system for mem sleep [ 13.252146] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.253519] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.254606] PM: Entering mem sleep [ 13.254621] Suspending console(s) (use no_console_suspend to debug) [ 13.254954] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 13.254993] sd 0:0:0:0: [sda] Stopping disk [ 13.311250] parport_pc 00:09: disabled [ 13.311462] serial 00:08: disabled [ 13.953427] PM: suspend of devices complete after 698.912 msecs [ 13.953608] PM: late suspend of devices complete after 0.179 msecs [ 13.969455] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 13.985452] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 14.001308] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 14.033298] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 14.049296] PM: noirq suspend of devices complete after 95.716 msecs [ 14.049494] ACPI: Preparing to enter system sleep state S3 [ 14.054587] PM: Saving platform NVS memory [ 14.054621] Disabling non-boot CPUs ... [ 14.157235] smpboot: CPU 1 is now offline [ 14.261197] smpboot: CPU 2 is now offline [ 14.365164] smpboot: CPU 3 is now offline [ 14.366290] ACPI: Low-level resume complete [ 14.366328] PM: Restoring platform NVS memory [ 14.366645] Enabling non-boot CPUs ... [ 14.366680] x86: Booting SMP configuration: [ 14.366680] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 14.380295] CPU1 is up [ 14.380311] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 14.393984] CPU2 is up [ 14.394000] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 14.407701] CPU3 is up [ 14.410464] ACPI: Waking up from system sleep state S3 [ 14.468567] acpi LNXPOWER:02: Turning OFF [ 14.468602] acpi LNXPOWER:01: Turning OFF [ 14.498434] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 14.546402] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 14.582389] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 14.646508] PM: noirq resume of devices complete after 177.941 msecs [ 14.646643] PM: early resume of devices complete after 0.110 msecs [ 14.646750] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X [ 14.646840] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 14.646869] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X [ 14.650866] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 14.866420] usb 2-1.6: reset full-speed USB device number 3 using ehci-pci [ 14.990228] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.992182] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 14.992525] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 14.992666] ata1.00: configured for UDMA/133 [ 14.998223] ata5: SATA link down (SStatus 0 SControl 300) [ 15.006227] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 15.008170] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 15.009347] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 15.009350] ata2.00: configured for UDMA/100 [ 15.010188] ata6: SATA link down (SStatus 0 SControl 300) [ 15.014208] sd 0:0:0:0: [sda] Starting disk [ 15.014226] ata4: SATA link down (SStatus 0 SControl 300) [ 15.030348] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [ 15.074215] tpm_tis 00:03: TPM is disabled/deactivated (0x7) [ 15.074981] serial 00:08: activated [ 15.075745] parport_pc 00:09: activated [ 15.210169] firewire_core 0000:23:00.0: rediscovered device fw0 [ 15.210433] usb 3-1.1: reset full-speed USB device number 4 using xhci_hcd [ 15.226726] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e603fc0 [ 15.226739] usb 3-1.1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 15.554136] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 15.694278] usb 3-1.1.1: reset low-speed USB device number 5 using xhci_hcd [ 15.713319] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e97ee40 [ 15.713322] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e97ef40 [ 15.713333] usb 3-1.1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 15.713336] usb 3-1.1.1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 15.722673] PM: resume of devices complete after 1076.369 msecs [ 15.723095] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 15.723351] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 15.723665] PM: Finishing wakeup. [ 15.723666] Restarting tasks ... done. [ 15.727967] video LNXVIDEO:01: Restoring backlight state [ 15.837932] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 17.814248] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.814284] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.309296] CIFS VFS: Error connecting to socket. Aborting operation. [ 25.309357] CIFS VFS: cifs_mount failed w/return code = -101 [ 28.331447] init: winbind main process (2796) terminated with status 127 [ 28.331462] init: winbind main process ended, respawning [ 28.343492] init: winbind main process (2812) terminated with status 127 [ 28.343510] init: winbind main process ended, respawning [ 28.362798] init: winbind main process (2816) terminated with status 127 [ 28.362813] init: winbind main process ended, respawning [ 28.371215] init: Failed to spawn nmbd main process: unable to execute: No such file or directory [ 28.389578] init: winbind main process (2822) terminated with status 127 [ 28.389593] init: winbind main process ended, respawning [ 28.406008] init: winbind main process (2852) terminated with status 127 [ 28.406026] init: winbind main process ended, respawning [ 28.414046] init: winbind main process (2857) terminated with status 127 [ 28.414063] init: winbind main process ended, respawning [ 28.422847] init: winbind main process (2863) terminated with status 127 [ 28.422859] init: winbind main process ended, respawning [ 28.432737] init: winbind main process (2877) terminated with status 127 [ 28.432748] init: winbind main process ended, respawning [ 28.443377] init: winbind main process (2885) terminated with status 127 [ 28.443394] init: winbind main process ended, respawning [ 28.451931] init: winbind main process (2890) terminated with status 127 [ 28.451942] init: winbind main process ended, respawning [ 28.459455] init: winbind main process (2894) terminated with status 127 [ 28.459466] init: winbind respawning too fast, stopped [ 28.476224] CIFS VFS: Autodisabling the use of server inode numbers on \\wrhstn10.emea.nsn-net.net\ee_groups_hst. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message. [ 28.484693] CIFS VFS: Autodisabling the use of server inode numbers on \\wrlinn11.emea.nsn-net.net\build_ltesdkroot. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message. [ 28.488255] CIFS VFS: Autodisabling the use of server inode numbers on \\wrhstn10.emea.nsn-net.net\ee_groups_hst. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message. [ 38.394762] CIFS VFS: Error connecting to socket. Aborting operation. [ 38.394857] CIFS VFS: cifs_mount failed w/return code = -115 [ 42.273108] audit_printk_skb: 96 callbacks suppressed [ 42.273111] type=1400 audit(1398407417.907:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3197 comm="apparmor_parser" [ 42.273117] type=1400 audit(1398407417.907:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3197 comm="apparmor_parser" [ 42.273481] type=1400 audit(1398407417.907:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3197 comm="apparmor_parser" [ 74.479929] Status code returned 0xc0000001 NT_STATUS_UNSUCCESSFUL [ 74.479945] CIFS VFS: Send error in SessSetup = -5 [ 74.480205] CIFS VFS: cifs_mount failed w/return code = -5