[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-18-generic (buildd@akateko) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu6) ) #38-Ubuntu SMP Mon Mar 17 21:40:06 UTC 2014 (Ubuntu 3.13.0-18.38-generic 3.13.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-18-generic root=UUID=225aabc5-9098-412c-9cf1-4b06f8ec4c80 ro quiet splash elevator=deadline nomdmonddf nomdmonisw vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 3503 05/06/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000330000000 aka 13056M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x32fe00000-0x32fffffff] [ 0.000000] [mem 0x32fe00000-0x32fffffff] page 2M [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x32c000000-0x32fdfffff] [ 0.000000] [mem 0x32c000000-0x32fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff] [ 0.000000] [mem 0x300000000-0x32bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfe8ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcfe8ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff] [ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x34cf8000-0x36673fff] [ 0.000000] ACPI: RSDP 00000000000fb860 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cfe90100 00005C (v01 050611 XSDT1157 20110506 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cfe90290 0000F4 (v03 050611 FACP1157 20110506 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603) [ 0.000000] ACPI: DSDT 00000000cfe90450 00E856 (v01 A1160 A1160000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cfea8000 000040 [ 0.000000] ACPI: APIC 00000000cfe90390 00007C (v01 050611 APIC1157 20110506 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cfe90410 00003C (v01 050611 OEMMCFG 20110506 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cfea8040 000072 (v01 050611 OEMB1157 20110506 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cfe9f450 0000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cfe9f540 000038 (v01 050611 OEMHPET 20110506 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cfe9f580 00088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x32fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x32fffffff] -> [mem 0x00000000-0x32fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x32fffffff] [ 0.000000] NODE_DATA [mem 0x32fff9000-0x32fffdfff] [ 0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x32fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xcfe8ffff] [ 0.000000] node 0: [mem 0x100000000-0x32fffffff] [ 0.000000] On node 0 totalpages: 3145261 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13243 pages used for memmap [ 0.000000] DMA32 zone: 847504 pages, LIFO batch:31 [ 0.000000] Normal zone: 35840 pages used for memmap [ 0.000000] Normal zone: 2293760 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe90000-0xcfea7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfea8000-0xcfecffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfed0000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xffefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.000000] e820: [mem 0xcff00000-0xffefffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88032fc00000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096093 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-18-generic root=UUID=225aabc5-9098-412c-9cf1-4b06f8ec4c80 ro quiet splash elevator=deadline nomdmonddf nomdmonisw vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 12209428K/12581044K available (7320K kernel code, 1138K rwdata, 3384K rodata, 1336K init, 1440K bss, 371616K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-5. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.004000] tsc: Fast TSC calibration using PIT [ 0.008000] tsc: Detected 2608.814 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5217.62 BogoMIPS (lpj=10435256) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000029] Security Framework initialized [ 0.000045] AppArmor: AppArmor initialized [ 0.000046] Yama: becoming mindful. [ 0.001157] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.005867] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008092] Mount-cache hash table entries: 256 [ 0.008280] Initializing cgroup subsys memory [ 0.008286] Initializing cgroup subsys devices [ 0.008288] Initializing cgroup subsys freezer [ 0.008290] Initializing cgroup subsys blkio [ 0.008291] Initializing cgroup subsys perf_event [ 0.008294] Initializing cgroup subsys hugetlb [ 0.008311] tseg: 0000000000 [ 0.008317] CPU: Physical Processor ID: 0 [ 0.008318] CPU: Processor Core ID: 0 [ 0.008320] mce: CPU supports 6 MCE banks [ 0.008325] LVT offset 0 assigned for vector 0xf9 [ 0.008329] process: using AMD E400 aware idle routine [ 0.008332] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.008332] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.008332] tlb_flushall_shift: 4 [ 0.008415] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000) [ 0.009159] ACPI: Core revision 20131115 [ 0.012954] ACPI: All ACPI Tables successfully acquired [ 0.020222] ftrace: allocating 28370 entries in 111 pages [ 0.032278] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072013] smpboot: CPU0: AMD Phenom(tm) II X4 810 Processor (fam: 10, model: 04, stepping: 02) [ 0.179685] Performance Events: AMD PMU driver. [ 0.179689] ... version: 0 [ 0.179690] ... bit width: 48 [ 0.179691] ... generic registers: 4 [ 0.179692] ... value mask: 0000ffffffffffff [ 0.179693] ... max period: 00007fffffffffff [ 0.179694] ... fixed-purpose events: 0 [ 0.179695] ... event mask: 000000000000000f [ 0.181211] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.181292] x86: Booting SMP configuration: [ 0.194395] process: System has AMD C1E enabled [ 0.194407] process: Switch to broadcast mode on CPU1 [ 0.207538] process: Switch to broadcast mode on CPU2 [ 0.181293] .... node #0, CPUs: #1 #2 #3 [ 0.220620] x86: Booted up 1 node, 4 CPUs [ 0.220623] smpboot: Total of 4 processors activated (20870.51 BogoMIPS) [ 0.220673] process: Switch to broadcast mode on CPU3 [ 0.223922] process: Switch to broadcast mode on CPU0 [ 0.224100] devtmpfs: initialized [ 0.228105] EVM: security.selinux [ 0.228106] EVM: security.SMACK64 [ 0.228107] EVM: security.ima [ 0.228108] EVM: security.capability [ 0.228209] PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes) [ 0.229155] pinctrl core: initialized pinctrl subsystem [ 0.229218] regulator-dummy: no parameters [ 0.229248] RTC time: 15:23:17, date: 03/19/14 [ 0.229287] NET: Registered protocol family 16 [ 0.229400] cpuidle: using governor ladder [ 0.229402] cpuidle: using governor menu [ 0.229406] node 0 link 0: io port [1000, ffffff] [ 0.229409] TOM: 00000000d0000000 aka 3328M [ 0.229411] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.229414] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.229417] node 0 link 0: mmio [f0000000, ffffffff] [ 0.229419] node 0 link 0: mmio [a0000, bffff] [ 0.229421] node 0 link 0: mmio [d0000000, dfffffff] [ 0.229423] TOM2: 0000000330000000 aka 13056M [ 0.229425] bus: [bus 00-07] on node 0 link 0 [ 0.229426] bus: 00 [io 0x0000-0xffff] [ 0.229427] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.229429] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.229430] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.229431] bus: 00 [mem 0x330000000-0xfcffffffff] [ 0.229506] ACPI: bus type PCI registered [ 0.229508] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.229564] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.229566] PCI: not using MMCONFIG [ 0.229567] PCI: Using configuration type 1 for base access [ 0.229568] PCI: Using configuration type 1 for extended access [ 0.229807] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.229808] mtrr: probably your BIOS does not setup all CPUs. [ 0.229809] mtrr: corrected configuration. [ 0.230632] bio: create slab at 0 [ 0.230797] ACPI: Added _OSI(Module Device) [ 0.230798] ACPI: Added _OSI(Processor Device) [ 0.230800] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.230801] ACPI: Added _OSI(Processor Aggregator Device) [ 0.233727] ACPI: Executed 3 blocks of module-level executable AML code [ 0.407102] ACPI: Interpreter enabled [ 0.407114] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.407129] ACPI: (supports S0 S1 S3 S4 S5) [ 0.407131] ACPI: Using IOAPIC for interrupt routing [ 0.407152] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.408077] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.417228] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.417322] ACPI: No dock devices found. [ 0.422552] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.422558] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.422563] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.422863] PCI host bridge to bus 0000:00 [ 0.422866] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.422868] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.422870] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.422872] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.422874] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.422876] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff] [ 0.422878] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.422888] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000 [ 0.422902] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.422993] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 0.423032] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.423073] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.423104] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400 [ 0.423143] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.423182] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.423208] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400 [ 0.423248] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.423288] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.423317] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400 [ 0.423356] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.423396] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.423421] pci 0000:00:0b.0: [1002:5980] type 01 class 0x060400 [ 0.423460] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.423500] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 0.423536] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.423555] pci 0000:00:11.0: reg 0x10: [io 0x7000-0x7007] [ 0.423565] pci 0000:00:11.0: reg 0x14: [io 0x6000-0x6003] [ 0.423575] pci 0000:00:11.0: reg 0x18: [io 0x5000-0x5007] [ 0.423586] pci 0000:00:11.0: reg 0x1c: [io 0x4000-0x4003] [ 0.423596] pci 0000:00:11.0: reg 0x20: [io 0x3000-0x300f] [ 0.423606] pci 0000:00:11.0: reg 0x24: [mem 0xfbafe400-0xfbafe7ff] [ 0.423700] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.423715] pci 0000:00:12.0: reg 0x10: [mem 0xfbaf6000-0xfbaf6fff] [ 0.423810] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.423837] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.423851] pci 0000:00:12.1: reg 0x10: [mem 0xfbaf7000-0xfbaf7fff] [ 0.423946] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.423978] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.423999] pci 0000:00:12.2: reg 0x10: [mem 0xfbafe800-0xfbafe8ff] [ 0.424089] pci 0000:00:12.2: supports D1 D2 [ 0.424091] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.424133] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.424166] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.424180] pci 0000:00:13.0: reg 0x10: [mem 0xfbafc000-0xfbafcfff] [ 0.424275] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.424303] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.424317] pci 0000:00:13.1: reg 0x10: [mem 0xfbafd000-0xfbafdfff] [ 0.424412] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.424444] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.424464] pci 0000:00:13.2: reg 0x10: [mem 0xfbafec00-0xfbafecff] [ 0.424555] pci 0000:00:13.2: supports D1 D2 [ 0.424557] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.424599] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.424635] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.424791] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.424809] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.424819] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.424829] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.424839] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.424849] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 0.424960] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.424983] pci 0000:00:14.2: reg 0x10: [mem 0xfbaf8000-0xfbafbfff 64bit] [ 0.425055] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.425095] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.425122] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.425249] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.425319] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.425344] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.425359] pci 0000:00:14.5: reg 0x10: [mem 0xfbaff000-0xfbafffff] [ 0.425454] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.425484] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.425549] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.425608] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.425669] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.425734] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.425845] pci 0000:06:00.0: [1002:6818] type 00 class 0x030000 [ 0.425858] pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.425868] pci 0000:06:00.0: reg 0x18: [mem 0xfbf80000-0xfbfbffff 64bit] [ 0.425874] pci 0000:06:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.425886] pci 0000:06:00.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref] [ 0.425922] pci 0000:06:00.0: supports D1 D2 [ 0.425923] pci 0000:06:00.0: PME# supported from D1 D2 D3hot [ 0.425967] pci 0000:06:00.1: [1002:aab0] type 00 class 0x040300 [ 0.425979] pci 0000:06:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff 64bit] [ 0.426039] pci 0000:06:00.1: supports D1 D2 [ 0.430786] pci 0000:00:02.0: PCI bridge to [bus 06] [ 0.430791] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.430794] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.430797] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.430850] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.430865] pci 0000:05:00.0: reg 0x10: [io 0xd800-0xd8ff] [ 0.430891] pci 0000:05:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit] [ 0.430920] pci 0000:05:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref] [ 0.430985] pci 0000:05:00.0: supports D1 D2 [ 0.430986] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.431024] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.431032] pci 0000:00:06.0: PCI bridge to [bus 05] [ 0.431036] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.431038] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.431099] pci 0000:04:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.431129] pci 0000:04:00.0: reg 0x10: [mem 0xfbdff800-0xfbdfffff 64bit] [ 0.431146] pci 0000:04:00.0: reg 0x18: [io 0xc800-0xc8ff] [ 0.431280] pci 0000:04:00.0: supports D2 [ 0.431281] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold [ 0.438796] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.438800] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff] [ 0.438802] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.438863] pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000 [ 0.438884] pci 0000:03:00.0: reg 0x10: [mem 0xfbce0000-0xfbcfffff] [ 0.438899] pci 0000:03:00.0: reg 0x14: [mem 0xfbc00000-0xfbc7ffff] [ 0.438914] pci 0000:03:00.0: reg 0x18: [io 0xbc00-0xbc1f] [ 0.438929] pci 0000:03:00.0: reg 0x1c: [mem 0xfbcdc000-0xfbcdffff] [ 0.438970] pci 0000:03:00.0: reg 0x30: [mem 0xfbc80000-0xfbcbffff pref] [ 0.439050] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.446805] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 0.446809] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 0.446812] pci 0000:00:0a.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.446864] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 [ 0.446879] pci 0000:02:00.0: reg 0x10: [io 0xa080-0xa087] [ 0.446890] pci 0000:02:00.0: reg 0x14: [io 0xa000-0xa003] [ 0.446901] pci 0000:02:00.0: reg 0x18: [io 0x9c00-0x9c07] [ 0.446912] pci 0000:02:00.0: reg 0x1c: [io 0x9880-0x9883] [ 0.446924] pci 0000:02:00.0: reg 0x20: [io 0x9800-0x980f] [ 0.446935] pci 0000:02:00.0: reg 0x24: [mem 0xfbbff000-0xfbbff7ff] [ 0.446946] pci 0000:02:00.0: reg 0x30: [mem 0xfbbd0000-0xfbbdffff pref] [ 0.446998] pci 0000:02:00.0: PME# supported from D3hot [ 0.447053] pci 0000:02:00.1: [1b4b:91a4] type 00 class 0x01018f [ 0.447069] pci 0000:02:00.1: reg 0x10: [io 0xac00-0xac07] [ 0.447080] pci 0000:02:00.1: reg 0x14: [io 0xa880-0xa883] [ 0.447091] pci 0000:02:00.1: reg 0x18: [io 0xa800-0xa807] [ 0.447102] pci 0000:02:00.1: reg 0x1c: [io 0xa480-0xa483] [ 0.447113] pci 0000:02:00.1: reg 0x20: [io 0xa400-0xa40f] [ 0.447124] pci 0000:02:00.1: reg 0x24: [mem 0xfbbffc00-0xfbbffc0f] [ 0.447135] pci 0000:02:00.1: reg 0x30: [mem 0xfbbe0000-0xfbbeffff pref] [ 0.447188] pci 0000:02:00.1: PME# supported from D3hot [ 0.454808] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.454812] pci 0000:00:0b.0: bridge window [io 0x9000-0xafff] [ 0.454815] pci 0000:00:0b.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.454857] pci 0000:01:06.0: [10e8:80bc] type 00 class 0x100000 [ 0.454875] pci 0000:01:06.0: reg 0x10: [io 0x8c00-0x8c3f] [ 0.455014] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 0.455018] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff] [ 0.455025] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.455027] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.455028] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.455030] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.455032] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) [ 0.455034] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.455716] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.455758] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.455798] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15) [ 0.455837] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.455877] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.455917] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15) [ 0.455956] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.455995] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.456200] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.456205] ACPI: \_SB_.PCI0: notify handler is installed [ 0.456238] Found 1 acpi root devices [ 0.456347] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.456350] vgaarb: loaded [ 0.456351] vgaarb: bridge control possible 0000:06:00.0 [ 0.456510] SCSI subsystem initialized [ 0.456584] libata version 3.00 loaded. [ 0.456611] ACPI: bus type USB registered [ 0.456627] usbcore: registered new interface driver usbfs [ 0.456635] usbcore: registered new interface driver hub [ 0.456658] usbcore: registered new device driver usb [ 0.456787] PCI: Using ACPI for IRQ routing [ 0.466079] PCI: pci_cache_line_size set to 64 bytes [ 0.466086] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.466162] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff] [ 0.466164] e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff] [ 0.466247] NetLabel: Initializing [ 0.466248] NetLabel: domain hash size = 128 [ 0.466249] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.466260] NetLabel: unlabeled traffic allowed by default [ 0.466338] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.466342] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.468419] Switched to clocksource hpet [ 0.473655] AppArmor: AppArmor Filesystem Enabled [ 0.473676] pnp: PnP ACPI init [ 0.473688] ACPI: bus type PNP registered [ 0.473739] pnp 00:00: [dma 4] [ 0.473760] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.473791] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.473810] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.473833] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.473889] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.473996] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.473999] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.474001] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.474239] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.474241] system 00:06: [io 0x040b] has been reserved [ 0.474243] system 00:06: [io 0x04d6] has been reserved [ 0.474246] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 0.474248] system 00:06: [io 0x0c14] has been reserved [ 0.474250] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 0.474251] system 00:06: [io 0x0c52] has been reserved [ 0.474253] system 00:06: [io 0x0c6c] has been reserved [ 0.474255] system 00:06: [io 0x0c6f] has been reserved [ 0.474257] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ 0.474259] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ 0.474261] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 0.474263] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 0.474265] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 0.474267] system 00:06: [io 0x0b00-0x0b3f] has been reserved [ 0.474269] system 00:06: [io 0x0800-0x089f] could not be reserved [ 0.474272] system 00:06: [io 0x0b00-0x0b0f] has been reserved [ 0.474274] system 00:06: [io 0x0b20-0x0b3f] has been reserved [ 0.474276] system 00:06: [io 0x0900-0x090f] has been reserved [ 0.474278] system 00:06: [io 0x0910-0x091f] has been reserved [ 0.474280] system 00:06: [io 0xfe00-0xfefe] has been reserved [ 0.474283] system 00:06: [mem 0xcff00000-0xcfffffff] has been reserved [ 0.474285] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.474287] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.474289] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.474655] pnp 00:07: [dma 0 disabled] [ 0.474721] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.475074] system 00:08: [io 0x0230-0x023f] has been reserved [ 0.475076] system 00:08: [io 0x0290-0x029f] has been reserved [ 0.475078] system 00:08: [io 0x0f40-0x0f4f] has been reserved [ 0.475081] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 0.475083] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.475134] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.475137] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.475230] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.475233] pnp 00:0a: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.475235] pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.475238] pnp 00:0a: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.475268] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.475271] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.475364] pnp: PnP ACPI: found 11 devices [ 0.475366] ACPI: bus type PNP unregistered [ 0.482238] pci 0000:00:02.0: PCI bridge to [bus 06] [ 0.482242] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.482245] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.482248] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.482252] pci 0000:00:06.0: PCI bridge to [bus 05] [ 0.482254] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.482257] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.482261] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.482264] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff] [ 0.482267] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.482271] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 0.482273] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 0.482276] pci 0000:00:0a.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.482281] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.482283] pci 0000:00:0b.0: bridge window [io 0x9000-0xafff] [ 0.482286] pci 0000:00:0b.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.482291] pci 0000:00:14.4: PCI bridge to [bus 01] [ 0.482294] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff] [ 0.482306] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.482308] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.482310] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.482312] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.482314] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.482315] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.482318] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.482319] pci_bus 0000:06: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.482321] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.482323] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.482325] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.482327] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.482329] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.482331] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.482333] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.482334] pci_bus 0000:02: resource 0 [io 0x9000-0xafff] [ 0.482336] pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.482338] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff] [ 0.482340] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.482342] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.482344] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.482345] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.482347] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.482349] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.482380] NET: Registered protocol family 2 [ 0.482578] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.482934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.483213] TCP: Hash tables configured (established 131072 bind 65536) [ 0.483249] TCP: reno registered [ 0.483269] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.483368] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.483509] NET: Registered protocol family 1 [ 0.877123] pci 0000:06:00.0: Boot video device [ 0.877143] PCI: CLS 64 bytes, default 64 [ 0.877206] Trying to unpack rootfs image as initramfs... [ 1.298966] Freeing initrd memory: 26096K (ffff880034cf8000 - ffff880036674000) [ 1.300732] PCI-DMA: Disabling AGP. [ 1.300807] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.300808] PCI-DMA: using GART IOMMU. [ 1.300810] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.304364] LVT offset 1 assigned for vector 0x400 [ 1.304374] IBS: LVT offset 1 assigned [ 1.304401] perf: AMD IBS detected (0x0000001f) [ 1.304446] microcode: CPU0: patch_level=0x010000c6 [ 1.304453] microcode: CPU1: patch_level=0x010000c6 [ 1.304461] microcode: CPU2: patch_level=0x010000c6 [ 1.304472] microcode: CPU3: patch_level=0x010000c6 [ 1.304543] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.304545] Scanning for low memory corruption every 60 seconds [ 1.304780] Initialise system trusted keyring [ 1.304832] audit: initializing netlink socket (disabled) [ 1.304842] type=2000 audit(1395242598.196:1): initialized [ 1.332713] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.334179] zbud: loaded [ 1.334365] VFS: Disk quotas dquot_6.5.2 [ 1.334406] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.334880] fuse init (API version 7.22) [ 1.334954] msgmni has been set to 24026 [ 1.335003] Key type big_key registered [ 1.335620] Key type asymmetric registered [ 1.335621] Asymmetric key parser 'x509' registered [ 1.335648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.335704] io scheduler noop registered [ 1.335706] io scheduler deadline registered (default) [ 1.335728] io scheduler cfq registered [ 1.335949] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.336084] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 1.336216] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X [ 1.336343] pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X [ 1.336473] pcieport 0000:00:0b.0: irq 44 for MSI/MSI-X [ 1.336525] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.336538] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.336582] ipmi message handler version 39.2 [ 1.336634] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.336638] ACPI: Power Button [PWRB] [ 1.336670] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.336672] ACPI: Power Button [PWRF] [ 1.336723] ACPI: processor limited to max C-state 1 [ 1.337579] GHES: HEST is not enabled! [ 1.337677] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.358192] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.359601] Linux agpgart interface v0.103 [ 1.360959] brd: module loaded [ 1.361694] loop: module loaded [ 1.362035] libphy: Fixed MDIO Bus: probed [ 1.362116] tun: Universal TUN/TAP device driver, 1.6 [ 1.362117] tun: (C) 1999-2004 Max Krasnyansky [ 1.362157] PPP generic driver version 2.4.2 [ 1.362198] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.362202] ehci-pci: EHCI PCI platform driver [ 1.362333] QUIRK: Enable AMD PLL fix [ 1.362352] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.362358] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.362362] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.362364] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.362378] ehci-pci 0000:00:12.2: debug port 1 [ 1.362422] ehci-pci 0000:00:12.2: irq 17, io mem 0xfbafe800 [ 1.373637] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.373682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.373684] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.373686] usb usb1: Product: EHCI Host Controller [ 1.373687] usb usb1: Manufacturer: Linux 3.13.0-18-generic ehci_hcd [ 1.373689] usb usb1: SerialNumber: 0000:00:12.2 [ 1.373778] hub 1-0:1.0: USB hub found [ 1.373785] hub 1-0:1.0: 6 ports detected [ 1.374010] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.374019] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.374021] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.374023] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.374037] ehci-pci 0000:00:13.2: debug port 1 [ 1.374074] ehci-pci 0000:00:13.2: irq 19, io mem 0xfbafec00 [ 1.385644] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.385676] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.385678] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.385679] usb usb2: Product: EHCI Host Controller [ 1.385681] usb usb2: Manufacturer: Linux 3.13.0-18-generic ehci_hcd [ 1.385683] usb usb2: SerialNumber: 0000:00:13.2 [ 1.385767] hub 2-0:1.0: USB hub found [ 1.385772] hub 2-0:1.0: 6 ports detected [ 1.385884] ehci-platform: EHCI generic platform driver [ 1.385892] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.385893] ohci-pci: OHCI PCI platform driver [ 1.386004] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.386008] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.386028] ohci-pci 0000:00:12.0: irq 16, io mem 0xfbaf6000 [ 1.445723] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.445725] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.445727] usb usb3: Product: OHCI PCI host controller [ 1.445728] usb usb3: Manufacturer: Linux 3.13.0-18-generic ohci_hcd [ 1.445730] usb usb3: SerialNumber: 0000:00:12.0 [ 1.445837] hub 3-0:1.0: USB hub found [ 1.445845] hub 3-0:1.0: 3 ports detected [ 1.446016] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.446020] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.446031] ohci-pci 0000:00:12.1: irq 16, io mem 0xfbaf7000 [ 1.505795] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.505797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.505799] usb usb4: Product: OHCI PCI host controller [ 1.505800] usb usb4: Manufacturer: Linux 3.13.0-18-generic ohci_hcd [ 1.505802] usb usb4: SerialNumber: 0000:00:12.1 [ 1.505907] hub 4-0:1.0: USB hub found [ 1.505917] hub 4-0:1.0: 3 ports detected [ 1.506091] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.506095] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.506114] ohci-pci 0000:00:13.0: irq 18, io mem 0xfbafc000 [ 1.565870] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.565871] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.565873] usb usb5: Product: OHCI PCI host controller [ 1.565875] usb usb5: Manufacturer: Linux 3.13.0-18-generic ohci_hcd [ 1.565876] usb usb5: SerialNumber: 0000:00:13.0 [ 1.565982] hub 5-0:1.0: USB hub found [ 1.565990] hub 5-0:1.0: 3 ports detected [ 1.566160] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.566165] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.566176] ohci-pci 0000:00:13.1: irq 18, io mem 0xfbafd000 [ 1.625948] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.625950] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.625952] usb usb6: Product: OHCI PCI host controller [ 1.625954] usb usb6: Manufacturer: Linux 3.13.0-18-generic ohci_hcd [ 1.625955] usb usb6: SerialNumber: 0000:00:13.1 [ 1.626058] hub 6-0:1.0: USB hub found [ 1.626067] hub 6-0:1.0: 3 ports detected [ 1.626240] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.626245] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.626256] ohci-pci 0000:00:14.5: irq 18, io mem 0xfbaff000 [ 1.685983] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.686015] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.686017] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.686018] usb usb7: Product: OHCI PCI host controller [ 1.686020] usb usb7: Manufacturer: Linux 3.13.0-18-generic ohci_hcd [ 1.686021] usb usb7: SerialNumber: 0000:00:14.5 [ 1.686120] hub 7-0:1.0: USB hub found [ 1.686128] hub 7-0:1.0: 2 ports detected [ 1.686189] ohci-platform: OHCI generic platform driver [ 1.686196] uhci_hcd: USB Universal Host Controller Interface driver [ 1.686248] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.686823] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.686830] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.686953] mousedev: PS/2 mouse device common for all mice [ 1.687092] rtc_cmos 00:01: RTC can wake from S4 [ 1.687206] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.687233] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.687288] device-mapper: uevent: version 1.0.3 [ 1.687345] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.687351] ledtrig-cpu: registered to indicate activity on CPUs [ 1.687445] TCP: cubic registered [ 1.687525] NET: Registered protocol family 10 [ 1.687689] NET: Registered protocol family 17 [ 1.687696] Key type dns_resolver registered [ 1.687995] Loading compiled-in X.509 certificates [ 1.689041] Loaded X.509 cert 'Magrathea: Glacier signing key: 50a51f016878d62c084f13ed047626639f5a1089' [ 1.689060] registered taskstats version 1 [ 1.692018] Key type trusted registered [ 1.694200] Key type encrypted registered [ 1.696377] AppArmor: AppArmor sha1 policy hashing enabled [ 1.696381] IMA: No TPM chip found, activating TPM-bypass! [ 1.696779] Magic number: 6:821:386 [ 1.696785] usb usb4: hash matches [ 1.696798] thermal cooling_device1: hash matches [ 1.696879] rtc_cmos 00:01: setting system clock to 2014-03-19 15:23:19 UTC (1395242599) [ 1.696975] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.697369] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.697370] EDD information not available. [ 1.697391] PM: Hibernation image not present or could not be loaded. [ 1.698758] Freeing unused kernel memory: 1336K (ffffffff81d1e000 - ffffffff81e6c000) [ 1.698760] Write protecting the kernel read-only data: 12288k [ 1.701080] Freeing unused kernel memory: 860K (ffff880001729000 - ffff880001800000) [ 1.702886] Freeing unused kernel memory: 712K (ffff880001b4e000 - ffff880001c00000) [ 1.717266] systemd-udevd[122]: starting version 204 [ 1.727844] wmi: Mapper loaded [ 1.735574] pps_core: LinuxPPS API ver. 1 registered [ 1.735577] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.737070] ahci 0000:00:11.0: version 3.0 [ 1.737318] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.737321] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 1.738300] scsi0 : pata_marvell [ 1.738305] scsi1 : ahci [ 1.738394] scsi2 : pata_marvell [ 1.738425] ata1: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 16 [ 1.738427] ata2: PATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 16 [ 1.739280] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.739292] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.739481] r8169 0000:05:00.0: irq 45 for MSI/MSI-X [ 1.739635] r8169 0000:05:00.0 eth0: RTL8168b/8111b at 0xffffc90001818000, 00:24:8c:3b:c7:00, XID 18000000 IRQ 45 [ 1.739637] r8169 0000:05:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.739799] PTP clock support registered [ 1.740744] scsi3 : ahci [ 1.742224] scsi4 : ahci [ 1.742287] scsi5 : ahci [ 1.742343] scsi6 : ahci [ 1.742396] scsi7 : ahci [ 1.742430] ata3: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe500 irq 22 [ 1.742433] ata4: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe580 irq 22 [ 1.742436] ata5: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe600 irq 22 [ 1.742438] ata6: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe680 irq 22 [ 1.742441] ata7: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe700 irq 22 [ 1.742443] ata8: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe780 irq 22 [ 1.742593] ahci 0000:02:00.0: irq 46 for MSI/MSI-X [ 1.742652] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.742655] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.742929] scsi8 : ahci [ 1.742987] scsi9 : ahci [ 1.743020] ata9: SATA max UDMA/133 abar m2048@0xfbbff000 port 0xfbbff100 irq 46 [ 1.743023] ata10: SATA max UDMA/133 abar m2048@0xfbbff000 port 0xfbbff180 irq 46 [ 1.744286] scsi10 : pata_atiixp [ 1.744390] scsi11 : pata_atiixp [ 1.744445] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.744449] ata11: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.744451] ata12: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.744453] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.744652] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.744674] e1000e 0000:03:00.0: irq 47 for MSI/MSI-X [ 1.744681] e1000e 0000:03:00.0: irq 48 for MSI/MSI-X [ 1.744688] e1000e 0000:03:00.0: irq 49 for MSI/MSI-X [ 1.806209] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.831424] usb 1-1: New USB device found, idVendor=1415, idProduct=4000 [ 1.831428] usb 1-1: New USB device strings: Mfr=10, Product=11, SerialNumber=0 [ 1.831431] usb 1-1: Product: USB 2.0 HUB [ 1.831433] usb 1-1: Manufacturer: SONY [ 1.831939] hub 1-1:1.0: USB hub found [ 1.832536] hub 1-1:1.0: 1 port detected [ 1.849548] e1000e 0000:03:00.0 eth1: registered PHC clock [ 1.849551] e1000e 0000:03:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:1a:09:50 [ 1.849553] e1000e 0000:03:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.849565] e1000e 0000:03:00.0 eth1: MAC: 3, PHY: 8, PBA No: E46981-008 [ 2.062603] ata8: SATA link down (SStatus 0 SControl 300) [ 2.202664] usb 1-3: new high-speed USB device number 4 using ehci-pci [ 2.230693] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.231706] ata9.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133 [ 2.231708] ata9.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.232889] ata9.00: configured for UDMA/133 [ 2.234700] ata7: softreset failed (device not ready) [ 2.234704] ata7: applying PMP SRST workaround and retrying [ 2.234726] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 330) [ 2.234728] ata5: softreset failed (device not ready) [ 2.234730] ata5: applying PMP SRST workaround and retrying [ 2.234746] ata4: softreset failed (device not ready) [ 2.234750] ata4: applying PMP SRST workaround and retrying [ 2.237730] ata10.00: ATA-8: WDC WD15EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 2.237731] ata10.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.238697] ata3: softreset failed (device not ready) [ 2.238699] ata3: applying PMP SRST workaround and retrying [ 2.238714] ata6: softreset failed (device not ready) [ 2.238717] ata6: applying PMP SRST workaround and retrying [ 2.240641] ata10.00: configured for UDMA/133 [ 2.302774] tsc: Refined TSC clocksource calibration: 2608.797 MHz [ 2.306851] firewire_core 0000:04:00.0: created device fw0: GUID fedcba9876543210, S400 [ 2.336744] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608 [ 2.336746] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.336748] usb 1-3: Product: USB2.0 Hub [ 2.337127] hub 1-3:1.0: USB hub found [ 2.337484] hub 1-3:1.0: 4 ports detected [ 2.406917] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.406939] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.406959] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.410915] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.410938] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.412137] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 [ 2.413681] ata3.00: configured for UDMA/100 [ 2.415390] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 [ 2.417532] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.417534] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.417639] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.417703] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 2.434122] ata6.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133 [ 2.434124] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.435301] ata6.00: configured for UDMA/133 [ 2.435619] ata4.00: ATA-8: MAXTOR STM3320613AS, MC1H, max UDMA/133 [ 2.435621] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.435627] ata5.00: ATA-8: MAXTOR STM3320613AS, MC1H, max UDMA/133 [ 2.435630] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.477545] ata5.00: configured for UDMA/133 [ 2.477554] ata4.00: configured for UDMA/133 [ 2.477684] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332061 MC1H PQ: 0 ANSI: 5 [ 2.477805] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 2.477809] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.477938] sd 3:0:0:0: [sda] Write Protect is off [ 2.477942] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.477985] scsi 4:0:0:0: Direct-Access ATA MAXTOR STM332061 MC1H PQ: 0 ANSI: 5 [ 2.477991] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.478090] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.478112] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2.478146] sd 4:0:0:0: [sdb] Write Protect is off [ 2.478149] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.478183] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.478253] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5 [ 2.478356] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.478377] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.478418] sd 5:0:0:0: [sdc] Write Protect is off [ 2.478421] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.478471] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.483572] sdc: [ 2.483811] sd 5:0:0:0: [sdc] Attached SCSI disk [ 2.496094] sda: sda1 [ 2.496378] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.501439] sdb: sdb1 [ 2.501709] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.792469] ata7.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133 [ 2.792472] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.793733] ata7.00: configured for UDMA/133 [ 2.793833] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5 [ 2.793961] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 2.793964] sd 6:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.794109] sd 6:0:0:0: [sdd] Write Protect is off [ 2.794112] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.794121] scsi 8:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5 [ 2.794157] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.794263] sd 8:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 2.794338] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 2.794345] sd 8:0:0:0: [sde] Write Protect is off [ 2.794348] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.794370] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.794462] scsi 9:0:0:0: Direct-Access ATA WDC WD15EARS-00M 51.0 PQ: 0 ANSI: 5 [ 2.794553] sd 9:0:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 2.794566] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 2.794602] sd 9:0:0:0: [sdf] Write Protect is off [ 2.794604] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 2.794644] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.794723] sde: sde1 [ 2.795015] sd 8:0:0:0: [sde] Attached SCSI disk [ 2.804217] sdd: sdd1 [ 2.804567] sd 6:0:0:0: [sdd] Attached SCSI disk [ 2.919540] usb 4-1: new low-speed USB device number 2 using ohci-pci [ 3.101921] usb 4-1: New USB device found, idVendor=046d, idProduct=c31b [ 3.101924] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.101926] usb 4-1: Product: Logitech USB Keyboard [ 3.101928] usb 4-1: Manufacturer: Logitech [ 3.112128] hidraw: raw HID events driver (C) Jiri Kosina [ 3.138076] usbcore: registered new interface driver usbhid [ 3.138079] usbhid: USB HID core driver [ 3.139761] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input4 [ 3.139857] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-1/input0 [ 3.143033] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input5 [ 3.143111] hid-generic 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-1/input1 [ 3.238493] sdf: sdf1 sdf2 [ 3.238863] sd 9:0:0:0: [sdf] Attached SCSI disk [ 3.278399] md: bind [ 3.280439] md: bind [ 3.283493] random: nonblocking pool is initialized [ 3.285978] md: raid1 personality registered for level 1 [ 3.286233] md/raid1:md0: active with 2 out of 2 mirrors [ 3.286254] md0: detected capacity change from 0 to 500106674176 [ 3.304113] Switched to clocksource tsc [ 3.307749] md0: unknown partition table [ 3.372023] usb 4-3: new full-speed USB device number 3 using ohci-pci [ 3.522757] bio: create slab at 1 [ 3.545392] usb 4-3: New USB device found, idVendor=0711, idProduct=0230 [ 3.545396] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.545399] usb 4-3: Product: Targus Group Intl [ 3.545400] usb 4-3: Manufacturer: Targus Group Intl [ 3.545402] usb 4-3: SerialNumber: 543262 [ 3.605242] bio: create slab at 2 [ 4.129377] usb 1-1.1: new high-speed USB device number 7 using ehci-pci [ 4.224486] usb 1-1.1: New USB device found, idVendor=1415, idProduct=2000 [ 4.224488] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.224490] usb 1-1.1: Product: USB Camera-B3.04.06.1 [ 4.224492] usb 1-1.1: Manufacturer: OmniVision Technologies, Inc. [ 4.357274] usb 3-2: new full-speed USB device number 2 using ohci-pci [ 4.530709] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b [ 4.530712] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.530714] usb 3-2: Product: USB Receiver [ 4.530715] usb 3-2: Manufacturer: Logitech [ 4.554843] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2 [ 4.558952] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0005/input/input6 [ 4.559050] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:12.0-2:1 [ 4.622050] usb 1-3.3: new full-speed USB device number 8 using ehci-pci [ 4.724227] usb 1-3.3: New USB device found, idVendor=08e6, idProduct=5503 [ 4.724231] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.724233] usb 1-3.3: Product: Prox Dual USB PC LinkReader [ 4.724235] usb 1-3.3: Manufacturer: Gemalto [ 4.724237] usb 1-3.3: SerialNumber: 10B00351 [ 4.777858] md: linear personality registered for level -1 [ 4.780678] md: multipath personality registered for level -4 [ 4.783479] md: raid0 personality registered for level 0 [ 4.853819] raid6: sse2x1 3672 MB/s [ 4.921895] raid6: sse2x2 5665 MB/s [ 4.989972] raid6: sse2x4 6735 MB/s [ 4.989974] raid6: using algorithm sse2x4 (6735 MB/s) [ 4.989975] raid6: using intx1 recovery algorithm [ 4.991272] xor: measuring software checksum speed [ 5.030019] prefetch64-sse: 10665.000 MB/sec [ 5.070068] generic_sse: 10077.000 MB/sec [ 5.070070] xor: using function: prefetch64-sse (10665.000 MB/sec) [ 5.071292] async_tx: api initialized (async) [ 5.078824] md: raid6 personality registered for level 6 [ 5.078826] md: raid5 personality registered for level 5 [ 5.078828] md: raid4 personality registered for level 4 [ 5.085216] md: raid10 personality registered for level 10 [ 5.372119] hid-generic 0003:08E6:5503.0007: hiddev0,hidraw4: USB HID v1.00 Device [Gemalto Prox Dual USB PC LinkReader] on usb-0000:00:12.2-3.3/input0 [ 5.447049] usb 1-3.4: new high-speed USB device number 9 using ehci-pci [ 5.510332] bio: create slab at 3 [ 5.510634] Btrfs loaded [ 5.539862] usb 1-3.4: config 1 interface 1 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 16 [ 5.539866] usb 1-3.4: config 1 interface 1 altsetting 0 bulk endpoint 0x86 has invalid maxpacket 16 [ 5.730811] usb 1-3.4: New USB device found, idVendor=1307, idProduct=0361 [ 5.730814] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.730817] usb 1-3.4: Product: MultiCard Device [ 5.730819] usb 1-3.4: Manufacturer: Generic [ 5.730820] usb 1-3.4: SerialNumber: 00000000000006 [ 5.734061] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 5.734126] scsi12 : usb-storage 1-3.4:1.0 [ 5.734191] usbcore: registered new interface driver usb-storage [ 6.733088] scsi 12:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2 [ 6.733712] scsi 12:0:0:1: Direct-Access Generic SD/MMC 0.00 PQ: 0 ANSI: 2 [ 6.734324] scsi 12:0:0:2: Direct-Access Generic microSD 0.00 PQ: 0 ANSI: 2 [ 6.734941] scsi 12:0:0:3: Direct-Access Generic MS/MS-PRO 0.00 PQ: 0 ANSI: 2 [ 6.735567] scsi 12:0:0:4: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2 [ 6.735761] sd 12:0:0:0: Attached scsi generic sg7 type 0 [ 6.735935] sd 12:0:0:1: Attached scsi generic sg8 type 0 [ 6.736148] sd 12:0:0:2: Attached scsi generic sg9 type 0 [ 6.736709] sd 12:0:0:3: Attached scsi generic sg10 type 0 [ 6.736859] sd 12:0:0:4: Attached scsi generic sg11 type 0 [ 6.765169] sd 12:0:0:3: [sdj] Attached SCSI removable disk [ 6.765797] sd 12:0:0:0: [sdg] Attached SCSI removable disk [ 6.766417] sd 12:0:0:4: [sdk] Attached SCSI removable disk [ 6.767304] sd 12:0:0:1: [sdh] Attached SCSI removable disk [ 6.768270] sd 12:0:0:2: [sdi] Attached SCSI removable disk [ 10.652454] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [ 11.052072] init: ureadahead main process (449) terminated with status 5 [ 11.214217] Adding 1558400k swap on /dev/sdf2. Priority:-1 extents:1 across:1558400k FS [ 11.236708] EXT4-fs (sde1): re-mounted. Opts: discard,errors=remount-ro [ 11.339651] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 11.374196] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: user_xattr [ 12.292090] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.292097] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.357105] init: Failed to spawn click-system-hooks main process: unable to execute: No such file or directory [ 12.366985] FS-Cache: Loaded [ 12.376310] RPC: Registered named UNIX socket transport module. [ 12.376314] RPC: Registered udp transport module. [ 12.376315] RPC: Registered tcp transport module. [ 12.376317] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.387996] FS-Cache: Netfs 'nfs' registered for caching [ 12.402526] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 12.507354] systemd-udevd[761]: starting version 204 [ 12.562495] lp: driver loaded but no devices found [ 12.577289] it87: Found IT8720F chip at 0x290, revision 2 [ 12.577341] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20131115/utaddress-251) [ 12.577346] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SIOE 2 (20131115/utaddress-251) [ 12.577350] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.605212] usbcore: registered new interface driver iforce [ 12.609346] AMD IOMMUv2 driver by Joerg Roedel [ 12.609349] AMD IOMMUv2 functionality not available on this system [ 12.624893] 8021q: 802.1Q VLAN Support v1.8 [ 12.635730] systemd-udevd[825]: renamed network interface eth1 to eth2 [ 12.695989] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 12.695993] Disabling lock debugging due to kernel taint [ 12.704933] fglrx: module verification failed: signature and/or required key missing - tainting kernel [ 12.714811] Bluetooth: Core ver 2.17 [ 12.714832] NET: Registered protocol family 31 [ 12.714834] Bluetooth: HCI device and connection manager initialized [ 12.714843] Bluetooth: HCI socket layer initialized [ 12.714845] Bluetooth: L2CAP socket layer initialized [ 12.714849] Bluetooth: SCO socket layer initialized [ 12.717222] type=1400 audit(1395242610.504:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/avahi-daemon" pid=928 comm="apparmor_parser" [ 12.719198] device-mapper: multipath: version 1.6.0 loaded [ 12.727849] <6>[fglrx] Maximum main memory to use for locked dma buffers: 11712 MBytes. [ 12.728204] <6>[fglrx] vendor: 1002 device: 6818 count: 1 [ 12.729329] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 12.730680] <6>[fglrx] Kernel PAT support is enabled [ 12.730700] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors [ 12.731574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.731577] Bluetooth: BNEP filters: protocol multicast [ 12.731587] Bluetooth: BNEP socket layer initialized [ 12.733921] Bluetooth: RFCOMM TTY layer initialized [ 12.733942] Bluetooth: RFCOMM socket layer initialized [ 12.733948] Bluetooth: RFCOMM ver 1.11 [ 12.741976] type=1400 audit(1395242610.528:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=979 comm="apparmor_parser" [ 12.741984] type=1400 audit(1395242610.528:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=979 comm="apparmor_parser" [ 12.742453] type=1400 audit(1395242610.528:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=979 comm="apparmor_parser" [ 12.767744] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251) [ 12.767752] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 2 (20131115/utaddress-251) [ 12.767756] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.770315] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 12.770384] sp5100_tco: PCI Revision ID: 0x3a [ 12.770402] sp5100_tco: failed to find MMIO address, giving up. [ 12.817835] init: cups main process (997) killed by HUP signal [ 12.817849] init: cups main process ended, respawning [ 12.821872] type=1400 audit(1395242610.608:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1104 comm="apparmor_parser" [ 12.821880] type=1400 audit(1395242610.608:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1104 comm="apparmor_parser" [ 12.821884] type=1400 audit(1395242610.608:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1104 comm="apparmor_parser" [ 12.822379] type=1400 audit(1395242610.608:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1104 comm="apparmor_parser" [ 12.822385] type=1400 audit(1395242610.608:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1104 comm="apparmor_parser" [ 12.822642] type=1400 audit(1395242610.608:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1104 comm="apparmor_parser" [ 12.849803] hda-intel 0000:00:14.2: Using LPIB position fix [ 12.853635] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 12.867987] SKU: Nid=0x1d sku_cfg=0x4015e601 [ 12.867991] SKU: port_connectivity=0x1 [ 12.867992] SKU: enable_pcbeep=0x1 [ 12.867993] SKU: check_sum=0x00000005 [ 12.867994] SKU: customization=0x000000e6 [ 12.867995] SKU: external_amp=0x0 [ 12.867996] SKU: platform_type=0x0 [ 12.867997] SKU: swap=0x0 [ 12.867998] SKU: override=0x1 [ 12.868550] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 12.868552] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.868553] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.868554] mono: mono_out=0x0 [ 12.868555] dig-out=0x11/0x1e [ 12.868556] inputs: [ 12.868558] Front Mic=0x19 [ 12.868559] Rear Mic=0x18 [ 12.868561] Line=0x1a [ 12.868562] realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d [ 12.868563] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888 [ 12.905777] usbcore: registered new interface driver usbserial [ 12.905806] usbcore: registered new interface driver usbserial_generic [ 12.905829] usbserial: USB Serial support registered for generic [ 12.908250] usbcore: registered new interface driver mct_u232 [ 12.908277] usbserial: USB Serial support registered for MCT U232 [ 12.908294] mct_u232 4-3:1.0: MCT U232 converter detected [ 12.908404] usb 4-3: MCT U232 converter now attached to ttyUSB0 [ 12.917882] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 12.919563] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 12.919991] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 12.921332] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 12.921453] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 12.923298] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 12.923400] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 12.923529] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 12.927753] MCE: In-kernel MCE decoding enabled. [ 12.930121] hda-intel 0000:06:00.1: Handle VGA-switcheroo audio client [ 12.930125] hda-intel 0000:06:00.1: Using LPIB position fix [ 12.930127] hda-intel 0000:06:00.1: Force to non-snoop mode [ 12.930168] snd_hda_intel 0000:06:00.1: irq 50 for MSI/MSI-X [ 12.931254] EDAC MC: Ver: 3.0.0 [ 12.934666] AMD64 EDAC driver v3.4.0 [ 12.934700] EDAC amd64: DRAM ECC disabled. [ 12.934706] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 12.934706] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 12.934706] (Note that use of the override may cause unknown side effects.) [ 12.935838] hda-intel 0000:06:00.1: Enable sync_write for stable communication [ 12.951133] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input21 [ 12.951337] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input20 [ 12.951398] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input19 [ 12.951455] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input18 [ 12.951514] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input17 [ 12.951568] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input16 [ 13.046864] Linux video capture interface: v2.00 [ 13.067370] gspca_main: v2.14.0 registered [ 13.076459] kvm: Nested Virtualization enabled [ 13.076464] kvm: Nested Paging enabled [ 13.085404] gspca_main: ov534-2.14.0 probing 1415:2000 [ 13.224642] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 13.224646] 8021q: adding VLAN 0 to HW filter on device eth2 [ 13.233353] r8169 0000:05:00.0 eth0: link down [ 13.233389] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.234151] r8169 0000:05:00.0 eth0: link down [ 13.238271] device eth0 entered promiscuous mode [ 13.266655] systemd-udevd[1455]: failed to execute '/lib/udev/usb_modeswitch' 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/ttyUSB0/tty/ttyUSB0 0711 0230 ': No such file or directory [ 13.272368] systemd-udevd[833]: conflicting device node '/dev/mapper/pdc_bbbgggjccd1' found, link to '/dev/dm-0' will not be created [ 13.314059] systemd-udevd[823]: conflicting device node '/dev/mapper/pdc_bbbgggjccd1' found, link to '/dev/dm-0' will not be created [ 13.410960] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 13.620020] init: samba-ad-dc main process (1785) terminated with status 1 [ 13.662451] gre: GRE over IPv4 demultiplexor driver [ 13.670047] openvswitch: Open vSwitch switching datapath [ 13.996542] device ovs-system entered promiscuous mode [ 14.007215] device br-ex entered promiscuous mode [ 14.010048] device qg-36daef49-5b entered promiscuous mode [ 14.021116] device br0 entered promiscuous mode [ 14.021374] device eth2 entered promiscuous mode [ 14.038949] device qr-4113f48f-63 entered promiscuous mode [ 14.042464] device br-int entered promiscuous mode [ 14.049434] device tap4162ef36-c3 entered promiscuous mode [ 14.057272] device tap2eceb503-ea entered promiscuous mode [ 14.074339] device tap4e850e8c-4b entered promiscuous mode [ 14.084754] device tapa95b5477-e5 entered promiscuous mode [ 14.095840] device tap3b86fa14-33 entered promiscuous mode [ 14.122613] device tapb3329644-40 entered promiscuous mode [ 14.140003] device tapd280873c-ac entered promiscuous mode [ 14.753431] usbcore: registered new interface driver ov534 [ 14.767177] current rate 85420 is different from the runtime rate 16000 [ 14.769365] 3:1: cannot get min/max values for control 2 (id 3) [ 14.769566] usbcore: registered new interface driver snd-usb-audio [ 14.793978] init: udev-fallback-graphics main process (2573) terminated with status 1 [ 15.386907] r8169 0000:05:00.0 eth0: link up [ 15.386916] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.184798] e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.185093] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 20.351894] init: failsafe main process (1597) killed by TERM signal [ 20.364764] NET: Registered protocol family 15 [ 20.416300] AVX instructions are not detected. [ 20.461562] AVX instructions are not detected. [ 20.483262] AVX instructions are not detected. [ 20.511797] AVX or AES-NI instructions are not detected. [ 20.527130] AVX or AES-NI instructions are not detected. [ 20.560270] AVX instructions are not detected. [ 20.685589] audit_printk_skb: 24 callbacks suppressed [ 20.685593] type=1400 audit(1395242618.464:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/bin/ping" pid=2995 comm="apparmor_parser" [ 20.686299] type=1400 audit(1395242618.464:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/share/gdm/guest-session/Xsession" pid=2996 comm="apparmor_parser" [ 20.686572] type=1400 audit(1395242618.464:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=2998 comm="apparmor_parser" [ 20.686580] type=1400 audit(1395242618.464:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2998 comm="apparmor_parser" [ 20.686585] type=1400 audit(1395242618.464:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2998 comm="apparmor_parser" [ 20.687057] type=1400 audit(1395242618.464:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2998 comm="apparmor_parser" [ 20.687061] type=1400 audit(1395242618.464:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2998 comm="apparmor_parser" [ 20.687305] type=1400 audit(1395242618.464:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2998 comm="apparmor_parser" [ 20.687371] type=1400 audit(1395242618.464:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2997 comm="apparmor_parser" [ 20.687378] type=1400 audit(1395242618.464:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium_browser" pid=2997 comm="apparmor_parser" [ 21.369657] Loading iSCSI transport class v2.0-870. [ 21.377345] iscsi: registered transport (tcp) [ 21.401978] iscsi: registered transport (iser) [ 21.599093] init: Failed to spawn tgt main process: unable to execute: No such file or directory [ 21.636425] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 21.701726] nbd: registered device at major 43 [ 21.745532] init: neutron-dhcp-agent main process (3432) terminated with status 2 [ 21.745546] init: neutron-dhcp-agent main process ended, respawning