[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-17-generic (buildd@toyol) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #31-Ubuntu SMP Mon Feb 3 21:52:43 UTC 2014 (Ubuntu 3.11.0-17.31-generic 3.11.10.3) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=b0706fbe-b480-401e-9b8a-f66c5af38cd8 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000aa3befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aa3bf000-0x00000000aaebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/181C, BIOS F.29 10/03/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 0A0000000 mask FF8000000 write-back [ 0.000000] 3 base 0A8000000 mask FFE000000 write-back [ 0.000000] 4 base 0AA000000 mask FFF000000 write-back [ 0.000000] 5 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask F80000000 write-back [ 0.000000] 8 base 24F600000 mask FFFE00000 uncachable [ 0.000000] 9 base 24F800000 mask FFF800000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x24f400000-0x24f5fffff] [ 0.000000] [mem 0x24f400000-0x24f5fffff] page 2M [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x24c000000-0x24f3fffff] [ 0.000000] [mem 0x24c000000-0x24f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x24bffffff] [ 0.000000] [mem 0x200000000-0x24bffffff] page 2M [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xaa3befff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xaa1fffff] page 2M [ 0.000000] [mem 0xaa200000-0xaa3befff] page 4k [ 0.000000] init_memory_mapping: [mem 0xaafff000-0xaaffffff] [ 0.000000] [mem 0xaafff000-0xaaffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x34cbc000-0x36655fff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000aaffe210 0009C (v01 HPQOEM SLIC-MPC 00000001 HP 01000013) [ 0.000000] ACPI: FACP 00000000aaffb000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 00000000aafe4000 132E3 (v01 HPQOEM 181C 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS 00000000aafb8000 00040 [ 0.000000] ACPI: UEFI 00000000aaffd000 00236 (v01 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 00000000aaffc000 000A5 (v32 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: HPET 00000000aaffa000 00038 (v01 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: APIC 00000000aaff9000 0008C (v03 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 00000000aaff8000 0003C (v01 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: SLIC 00000000aafe3000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: WDAT 00000000aafe2000 00224 (v01 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 00000000aafe0000 01068 (v01 HPQOEM 181C 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 00000000aafde000 00028 (v01 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: ASPT 00000000aafdc000 00034 (v07 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: DBGP 00000000aafdb000 00034 (v01 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: FPDT 00000000aafd9000 00044 (v01 HPQOEM 181C 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 00000000aafd7000 00968 (v01 HPQOEM 181C 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000aafd6000 00B22 (v01 HPQOEM 181C 00003000 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x24f5fffff] [ 0.000000] NODE_DATA [mem 0x24f5f3000-0x24f5f7fff] [ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246c00000-ffff88024ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x24f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00090fff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xaa3befff] [ 0.000000] node 0: [mem 0xaafff000-0xaaffffff] [ 0.000000] node 0: [mem 0x100000000-0x24f5fffff] [ 0.000000] On node 0 totalpages: 2070351 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3984 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10823 pages used for memmap [ 0.000000] DMA32 zone: 692671 pages, LIFO batch:31 [ 0.000000] Normal zone: 21464 pages used for memmap [ 0.000000] Normal zone: 1373696 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaa3bf000-0xaaebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff] [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88024f200000 s86720 r8192 d23872 u262144 [ 0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=b0706fbe-b480-401e-9b8a-f66c5af38cd8 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8040528K/8281404K available (7150K kernel code, 1083K rwdata, 3312K rodata, 1364K init, 1420K bss, 240876K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2494.409 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.81 BogoMIPS (lpj=9977636) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000023] Security Framework initialized [ 0.000038] AppArmor: AppArmor initialized [ 0.000039] Yama: becoming mindful. [ 0.000422] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002178] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002972] Mount-cache hash table entries: 256 [ 0.003120] Initializing cgroup subsys memory [ 0.003127] Initializing cgroup subsys devices [ 0.003129] Initializing cgroup subsys freezer [ 0.003130] Initializing cgroup subsys blkio [ 0.003131] Initializing cgroup subsys perf_event [ 0.003133] Initializing cgroup subsys hugetlb [ 0.003149] CPU: Physical Processor ID: 0 [ 0.003150] CPU: Processor Core ID: 0 [ 0.003155] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003155] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003464] mce: CPU supports 7 MCE banks [ 0.003473] CPU0: Thermal monitoring enabled (TM1) [ 0.003480] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003480] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003480] tlb_flushall_shift: 1 [ 0.003589] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000) [ 0.005419] ACPI: Core revision 20130517 [ 0.010612] ACPI: All ACPI Tables successfully acquired [ 0.059989] ftrace: allocating 27846 entries in 109 pages [ 0.073259] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.112990] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09) [ 0.112998] TSC deadline timer enabled [ 0.113008] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.113015] ... version: 3 [ 0.113016] ... bit width: 48 [ 0.113016] ... generic registers: 4 [ 0.113017] ... value mask: 0000ffffffffffff [ 0.113018] ... max period: 0000ffffffffffff [ 0.113019] ... fixed-purpose events: 3 [ 0.113020] ... event mask: 000000070000000f [ 0.127928] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.114403] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.154993] Brought up 4 CPUs [ 0.154997] smpboot: Total of 4 processors activated (19955.27 BogoMIPS) [ 0.158131] devtmpfs: initialized [ 0.159095] EVM: security.selinux [ 0.159096] EVM: security.SMACK64 [ 0.159097] EVM: security.capability [ 0.159147] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes) [ 0.159894] regulator-dummy: no parameters [ 0.159923] RTC time: 20:04:51, date: 03/08/14 [ 0.159952] NET: Registered protocol family 16 [ 0.160070] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.160072] ACPI: bus type PCI registered [ 0.160073] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.160122] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.160124] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.182083] PCI: Using configuration type 1 for base access [ 0.182826] bio: create slab at 0 [ 0.182947] ACPI: Added _OSI(Module Device) [ 0.182948] ACPI: Added _OSI(Processor Device) [ 0.182949] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.182951] ACPI: Added _OSI(Processor Aggregator Device) [ 0.184377] ACPI: EC: Look up EC in DSDT [ 0.185790] ACPI: Executed 1 blocks of module-level executable AML code [ 0.191163] ACPI Error: No handler for Region [RAM_] (ffff880243857798) [EmbeddedControl] (20130517/evregion-162) [ 0.191167] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130517/exfldio-305) [ 0.191170] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88024389c4d8), AE_NOT_EXIST (20130517/psparse-536) [ 0.191175] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88024389c4d8), AE_NOT_EXIST (20130517/uteval-103) [ 0.191485] ACPI: SSDT 00000000aae5a018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123) [ 0.191849] ACPI: Dynamic OEM Table Load: [ 0.191850] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123) [ 0.197767] ACPI: SSDT 00000000aaeada98 00303 (v01 PmRef ApIst 00003000 INTL 20111123) [ 0.198157] ACPI: Dynamic OEM Table Load: [ 0.198159] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123) [ 0.201655] ACPI: SSDT 00000000aabcdd98 00119 (v01 PmRef ApCst 00003000 INTL 20111123) [ 0.202015] ACPI: Dynamic OEM Table Load: [ 0.202017] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123) [ 0.661883] ACPI: Interpreter enabled [ 0.661890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.661894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.661908] ACPI: (supports S0 S3 S4 S5) [ 0.661909] ACPI: Using IOAPIC for interrupt routing [ 0.661934] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.662179] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.703367] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.703473] \_SB_.PCI0:_OSC invalid UUID [ 0.703474] _OSC request data:1 8 0 [ 0.703515] \_SB_.PCI0:_OSC invalid UUID [ 0.703516] _OSC request data:1 1f 0 [ 0.703519] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.703520] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.704044] acpiphp_glue: can't evaluate _ADR (0x5) [ 0.704068] PCI host bridge to bus 0000:00 [ 0.704070] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.704072] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.704074] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.704075] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.704077] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.704084] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.704161] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.704172] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit] [ 0.704178] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.704183] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.704273] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.704296] pci 0000:00:14.0: reg 0x10: [mem 0xc2600000-0xc260ffff 64bit] [ 0.704368] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.704406] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.704438] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.704461] pci 0000:00:16.0: reg 0x10: [mem 0xc2614000-0xc261400f 64bit] [ 0.704538] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.704611] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.704632] pci 0000:00:1a.0: reg 0x10: [mem 0xc2619000-0xc26193ff] [ 0.704722] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.704773] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.704806] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.704822] pci 0000:00:1b.0: reg 0x10: [mem 0xc2610000-0xc2613fff 64bit] [ 0.704891] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.704930] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.704964] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.705094] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.705144] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.705177] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.705306] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.705356] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.705389] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.705518] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.705568] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.705597] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400 [ 0.705675] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.705717] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.705751] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.705772] pci 0000:00:1d.0: reg 0x10: [mem 0xc2618000-0xc26183ff] [ 0.705862] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.705912] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.705943] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.706106] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400 [ 0.706125] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.706133] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.706142] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.706150] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.706158] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.706166] pci 0000:00:1f.2: reg 0x24: [mem 0xc2617000-0xc26177ff] [ 0.706211] pci 0000:00:1f.2: PME# supported from D3hot [ 0.706270] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.706286] pci 0000:00:1f.3: reg 0x10: [mem 0xc2615000-0xc26150ff 64bit] [ 0.706307] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.706456] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.706647] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000 [ 0.706712] pci 0000:02:00.0: reg 0x10: [mem 0xc1000000-0xc1000fff] [ 0.707207] pci 0000:02:00.0: supports D1 D2 [ 0.707209] pci 0000:02:00.0: PME# supported from D1 D2 D3hot [ 0.707294] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.714925] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.714930] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.714934] pci 0000:00:1c.1: bridge window [mem 0xc1000000-0xc1ffffff] [ 0.714940] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref] [ 0.715069] pci 0000:04:00.0: [1814:539a] type 00 class 0x028000 [ 0.715097] pci 0000:04:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff] [ 0.715347] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.722934] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.722941] pci 0000:00:1c.3: bridge window [mem 0xc2500000-0xc25fffff] [ 0.723027] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.723048] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.723083] pci 0000:05:00.0: reg 0x18: [mem 0xc2404000-0xc2404fff 64bit pref] [ 0.723105] pci 0000:05:00.0: reg 0x20: [mem 0xc2400000-0xc2403fff 64bit pref] [ 0.723199] pci 0000:05:00.0: supports D1 D2 [ 0.723200] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.730742] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.738911] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.738919] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.738943] pci 0000:00:1c.5: bridge window [mem 0xc2400000-0xc24fffff 64bit pref] [ 0.739367] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.739414] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.739459] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.739503] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.739547] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.739591] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.739634] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.739679] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.739966] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.739971] ACPI: \_SB_.PCI0: notify handler is installed [ 0.740021] Found 1 acpi root devices [ 0.740052] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.740131] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.740134] vgaarb: loaded [ 0.740134] vgaarb: bridge control possible 0000:00:02.0 [ 0.740260] SCSI subsystem initialized [ 0.740262] ACPI: bus type ATA registered [ 0.740305] libata version 3.00 loaded. [ 0.740317] ACPI: bus type USB registered [ 0.740330] usbcore: registered new interface driver usbfs [ 0.740336] usbcore: registered new interface driver hub [ 0.740353] usbcore: registered new device driver usb [ 0.740435] PCI: Using ACPI for IRQ routing [ 0.747109] PCI: pci_cache_line_size set to 64 bytes [ 0.747219] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff] [ 0.747221] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.747222] e820: reserve RAM buffer [mem 0xaa3bf000-0xabffffff] [ 0.747224] e820: reserve RAM buffer [mem 0xab000000-0xabffffff] [ 0.747225] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff] [ 0.747291] NetLabel: Initializing [ 0.747292] NetLabel: domain hash size = 128 [ 0.747293] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.747301] NetLabel: unlabeled traffic allowed by default [ 0.747348] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.747352] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.749375] Switched to clocksource hpet [ 0.753327] AppArmor: AppArmor Filesystem Enabled [ 0.753349] pnp: PnP ACPI init [ 0.753362] ACPI: bus type PNP registered [ 0.753401] pnp 00:00: [dma 4] [ 0.753418] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.753436] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.753523] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.753550] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.753586] system 00:04: [io 0x1100-0x110f] has been reserved [ 0.753587] system 00:04: [io 0xffff] has been reserved [ 0.753589] system 00:04: [io 0xffff] has been reserved [ 0.753591] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.753593] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.753595] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.753596] system 00:04: [io 0x1200-0x1207] has been reserved [ 0.753599] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved [ 0.753601] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.753621] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.753656] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.753659] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.753710] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.753733] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active) [ 0.753831] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.753833] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.753835] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.753836] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.753838] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.753840] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.753842] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.753843] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.753845] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.753847] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.753849] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.754056] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved [ 0.754057] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved [ 0.754059] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.754109] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.754135] pnp: PnP ACPI: found 12 devices [ 0.754136] ACPI: bus type PNP unregistered [ 0.760240] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.760259] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.760262] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.760268] pci 0000:00:1c.1: bridge window [mem 0xc1000000-0xc1ffffff] [ 0.760274] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref] [ 0.760282] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.760288] pci 0000:00:1c.3: bridge window [mem 0xc2500000-0xc25fffff] [ 0.760299] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.760303] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.760310] pci 0000:00:1c.5: bridge window [mem 0xc2400000-0xc24fffff 64bit pref] [ 0.760570] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.760571] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.760573] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.760574] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.760576] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.760578] pci_bus 0000:02: resource 1 [mem 0xc1000000-0xc1ffffff] [ 0.760579] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref] [ 0.760581] pci_bus 0000:04: resource 1 [mem 0xc2500000-0xc25fffff] [ 0.760583] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.760584] pci_bus 0000:05: resource 2 [mem 0xc2400000-0xc24fffff 64bit pref] [ 0.760609] NET: Registered protocol family 2 [ 0.760776] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.761000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.761168] TCP: Hash tables configured (established 65536 bind 65536) [ 0.761186] TCP: reno registered [ 0.761195] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.761223] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.761291] NET: Registered protocol family 1 [ 0.761301] pci 0000:00:02.0: Boot video device [ 0.793582] PCI: CLS 64 bytes, default 64 [ 0.793626] Trying to unpack rootfs image as initramfs... [ 1.182886] Freeing initrd memory: 26216K (ffff880034cbc000 - ffff880036656000) [ 1.182891] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.182893] software IO TLB [mem 0xa63bf000-0xaa3bf000] (64MB) mapped at [ffff8800a63bf000-ffff8800aa3befff] [ 1.182928] Simple Boot Flag at 0x44 set to 0x1 [ 1.183077] Scanning for low memory corruption every 60 seconds [ 1.183324] Initialise module verification [ 1.183356] audit: initializing netlink socket (disabled) [ 1.183365] type=2000 audit(1394309092.132:1): initialized [ 1.208059] bounce pool size: 64 pages [ 1.208067] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.209050] zbud: loaded [ 1.209165] VFS: Disk quotas dquot_6.5.2 [ 1.209196] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.209576] fuse init (API version 7.22) [ 1.209636] msgmni has been set to 15755 [ 1.210121] Key type asymmetric registered [ 1.210124] Asymmetric key parser 'x509' registered [ 1.210163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.210198] io scheduler noop registered [ 1.210199] io scheduler deadline registered (default) [ 1.210220] io scheduler cfq registered [ 1.210508] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.210518] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.210558] intel_idle: MWAIT substates: 0x21120 [ 1.210560] intel_idle: v0.4 model 0x3A [ 1.210561] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.210682] ACPI: AC Adapter [ADP1] (off-line) [ 1.210807] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.213453] ACPI: Lid Switch [LID0] [ 1.213488] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.213492] ACPI: Power Button [PWRF] [ 1.213555] ACPI: Requesting acpi_cpufreq [ 1.229612] ACPI: EC: GPE storm detected(9 GPEs), transactions will use polling mode [ 1.414171] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.414173] ACPI: Thermal Zone [TZS0] (44 C) [ 1.430185] [Firmware Bug]: No valid trip found [ 1.646432] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.646433] ACPI: Thermal Zone [TZS2] (45 C) [ 1.766569] thermal LNXTHERM:03: registered as thermal_zone2 [ 1.766571] ACPI: Thermal Zone [TZS3] (30 C) [ 1.766595] GHES: HEST is not enabled! [ 1.766655] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.838672] Linux agpgart interface v0.103 [ 1.839576] brd: module loaded [ 1.840132] loop: module loaded [ 1.840373] libphy: Fixed MDIO Bus: probed [ 1.840430] tun: Universal TUN/TAP device driver, 1.6 [ 1.840431] tun: (C) 1999-2004 Max Krasnyansky [ 1.840472] PPP generic driver version 2.4.2 [ 1.840506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.840507] ehci-pci: EHCI PCI platform driver [ 1.840601] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1.840609] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.840613] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.840626] ehci-pci 0000:00:1a.0: debug port 2 [ 1.844513] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.844530] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2619000 [ 1.854651] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.854667] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.854668] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.854670] usb usb1: Product: EHCI Host Controller [ 1.854671] usb usb1: Manufacturer: Linux 3.11.0-17-generic ehci_hcd [ 1.854672] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.854750] hub 1-0:1.0: USB hub found [ 1.854754] hub 1-0:1.0: 2 ports detected [ 1.854911] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1.854917] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.854921] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.854932] ehci-pci 0000:00:1d.0: debug port 2 [ 1.858844] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.858856] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2618000 [ 1.870670] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.870679] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.870681] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.870682] usb usb2: Product: EHCI Host Controller [ 1.870684] usb usb2: Manufacturer: Linux 3.11.0-17-generic ehci_hcd [ 1.870685] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.870759] hub 2-0:1.0: USB hub found [ 1.870762] hub 2-0:1.0: 2 ports detected [ 1.870840] ehci-platform: EHCI generic platform driver [ 1.870846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.870847] ohci-pci: OHCI PCI platform driver [ 1.870853] ohci-platform: OHCI generic platform driver [ 1.870857] uhci_hcd: USB Universal Host Controller Interface driver [ 1.870949] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.870952] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.870955] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.871048] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.871069] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X [ 1.871113] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.871115] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.871116] usb usb3: Product: xHCI Host Controller [ 1.871117] usb usb3: Manufacturer: Linux 3.11.0-17-generic xhci_hcd [ 1.871119] usb usb3: SerialNumber: 0000:00:14.0 [ 1.871171] xHCI xhci_add_endpoint called for root hub [ 1.871173] xHCI xhci_check_bandwidth called for root hub [ 1.871188] hub 3-0:1.0: USB hub found [ 1.871195] hub 3-0:1.0: 4 ports detected [ 1.871446] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.871449] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.871467] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.871468] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.871470] usb usb4: Product: xHCI Host Controller [ 1.871471] usb usb4: Manufacturer: Linux 3.11.0-17-generic xhci_hcd [ 1.871472] usb usb4: SerialNumber: 0000:00:14.0 [ 1.871519] xHCI xhci_add_endpoint called for root hub [ 1.871521] xHCI xhci_check_bandwidth called for root hub [ 1.871534] hub 4-0:1.0: USB hub found [ 1.871541] hub 4-0:1.0: 4 ports detected [ 1.886731] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.913137] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.913141] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.913228] mousedev: PS/2 mouse device common for all mice [ 1.914376] rtc_cmos 00:05: RTC can wake from S4 [ 1.914492] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.914519] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.914565] device-mapper: uevent: version 1.0.3 [ 1.914614] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 1.914680] cpuidle: using governor ladder [ 1.914778] cpuidle: using governor menu [ 1.914786] ledtrig-cpu: registered to indicate activity on CPUs [ 1.914853] TCP: cubic registered [ 1.914916] NET: Registered protocol family 10 [ 1.915061] NET: Registered protocol family 17 [ 1.915073] Key type dns_resolver registered [ 1.915275] PM: Hibernation image not present or could not be loaded. [ 1.915278] Loading module verification certificates [ 1.916065] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 2a3861a17986e2fcfa4fcad981cb7e6fd9516274' [ 1.916073] registered taskstats version 1 [ 1.918010] Key type trusted registered [ 1.919526] Key type encrypted registered [ 1.921077] AppArmor: AppArmor sha1 policy hashing enabled [ 1.921557] Magic number: 6:217:93 [ 1.921657] rtc_cmos 00:05: setting system clock to 2014-03-08 20:04:53 UTC (1394309093) [ 1.942120] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.127268] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.127270] EDD information not available. [ 2.167051] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.183065] tsc: Refined TSC clocksource calibration: 2494.333 MHz [ 2.299650] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.299653] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.299925] hub 1-1:1.0: USB hub found [ 2.300134] hub 1-1:1.0: 6 ports detected [ 2.411300] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.543928] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.543931] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.544200] hub 2-1:1.0: USB hub found [ 2.544292] hub 2-1:1.0: 8 ports detected [ 2.615746] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.709101] usb 1-1.1: New USB device found, idVendor=138a, idProduct=0018 [ 2.709118] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.709120] usb 1-1.1: SerialNumber: cc70f22c3ee6 [ 2.779934] usb 1-1.2: new low-speed USB device number 4 using ehci-pci [ 2.879685] usb 1-1.2: New USB device found, idVendor=1d57, idProduct=ad02 [ 2.879688] usb 1-1.2: New USB device strings: Mfr=1, Product=1, SerialNumber=2 [ 2.879690] usb 1-1.2: Product: Feeling-tech-USB product [ 2.879691] usb 1-1.2: Manufacturer: Feeling-tech-USB product [ 2.879693] usb 1-1.2: SerialNumber: FM8PU86-Ver0E-0000 [ 2.952142] usb 1-1.3: new high-speed USB device number 5 using ehci-pci [ 3.126825] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b2f8 [ 3.126843] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.126845] usb 1-1.3: Product: HP Truevision HD [ 3.126846] usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd. [ 3.126847] usb 1-1.3: SerialNumber: 0x0001 [ 3.184272] Switched to clocksource tsc [ 3.228336] ACPI: Battery Slot [BAT0] (battery present) [ 3.229070] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000) [ 3.229073] Write protecting the kernel read-only data: 12288k [ 3.231172] Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000) [ 3.232658] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000) [ 3.243867] systemd-udevd[127]: starting version 204 [ 3.261721] wmi: Mapper loaded [ 3.266478] hidraw: raw HID events driver (C) Jiri Kosina [ 3.269242] [drm] Initialized drm 1.1.0 20060810 [ 3.271426] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.271434] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.271660] r8169 0000:05:00.0: irq 41 for MSI/MSI-X [ 3.271827] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c18000, a0:b3:cc:47:54:d0, XID 0c900800 IRQ 41 [ 3.271829] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.273811] rtsx_pci 0000:02:00.0: irq 42 for MSI/MSI-X [ 3.273844] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42 [ 3.277873] ahci 0000:00:1f.2: version 3.0 [ 3.278020] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 3.278136] usbcore: registered new interface driver usbhid [ 3.278138] usbhid: USB HID core driver [ 3.292316] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode [ 3.292323] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 3.292330] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.300845] scsi0 : ahci [ 3.301107] scsi1 : ahci [ 3.301179] scsi2 : ahci [ 3.301761] scsi3 : ahci [ 3.302053] scsi4 : ahci [ 3.302777] scsi5 : ahci [ 3.302856] ata1: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617100 irq 43 [ 3.302859] ata2: DUMMY [ 3.302861] ata3: DUMMY [ 3.302862] ata4: DUMMY [ 3.302866] ata5: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617300 irq 43 [ 3.302867] ata6: DUMMY [ 3.303723] [drm] Memory usable by graphics device = 2048M [ 3.303730] i915 0000:00:02.0: setting latency timer to 64 [ 3.309974] input: Feeling-tech-USB product Feeling-tech-USB product as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3 [ 3.310771] hid-generic 0003:1D57:AD02.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Feeling-tech-USB product Feeling-tech-USB product] on usb-0000:00:1a.0-1.2/input0 [ 3.310980] input: Feeling-tech-USB product Feeling-tech-USB product as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4 [ 3.311089] hid-generic 0003:1D57:AD02.0002: input,hidraw1: USB HID v1.10 Mouse [Feeling-tech-USB product Feeling-tech-USB product] on usb-0000:00:1a.0-1.2/input1 [ 3.329828] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 3.329837] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.329838] [drm] Driver supports precise vblank timestamp query. [ 3.329887] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.374686] fbcon: inteldrmfb (fb0) is primary device [ 3.620748] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.622339] ata5.00: ATAPI: hp BD CMB UJ160, 1.00, max UDMA/133 [ 3.623800] ata5.00: configured for UDMA/133 [ 3.628756] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.630738] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0AB0Q, max UDMA/133 [ 3.630740] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.631005] ata1.00: configured for UDMA/133 [ 3.631206] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 [ 3.631441] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.631479] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.631541] sd 0:0:0:0: [sda] Write Protect is off [ 3.631544] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.631576] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.632086] sda: sda1 sda2 [ 3.632362] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.633002] scsi 4:0:0:0: CD-ROM hp BD CMB UJ160 1.00 PQ: 0 ANSI: 5 [ 3.643990] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.643991] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.644138] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.644267] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 4.181411] Console: switching to colour frame buffer device 200x56 [ 4.184575] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.184576] i915 0000:00:02.0: registered panic notifier [ 4.417749] acpi device:3e: registered as cooling_device4 [ 4.418174] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.418221] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 4.418288] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.514524] xor: automatically using best checksumming function: [ 4.553723] avx : 19196.000 MB/sec [ 4.555501] device-mapper: dm-raid45: initialized v0.2594b [ 4.586789] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.776782] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.800623] systemd-udevd[386]: starting version 204 [ 4.805828] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 4.830094] lp: driver loaded but no devices found [ 4.857032] hp_accel: hardware type DV7 found [ 4.870383] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 5.006912] lis3lv02d: 8 bits 3DC sensor found [ 5.016808] Bluetooth: Core ver 2.16 [ 5.016830] NET: Registered protocol family 31 [ 5.016832] Bluetooth: HCI device and connection manager initialized [ 5.016839] Bluetooth: HCI socket layer initialized [ 5.016842] Bluetooth: L2CAP socket layer initialized [ 5.016849] Bluetooth: SCO socket layer initialized [ 5.026221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.026225] Bluetooth: BNEP filters: protocol multicast [ 5.026234] Bluetooth: BNEP socket layer initialized [ 5.029457] Bluetooth: RFCOMM TTY layer initialized [ 5.029471] Bluetooth: RFCOMM socket layer initialized [ 5.029473] Bluetooth: RFCOMM ver 1.11 [ 5.048361] init: avahi-cups-reload main process (523) terminated with status 1 [ 5.056780] ppdev: user-space parallel port driver [ 5.239371] mei_me 0000:00:16.0: setting latency timer to 64 [ 5.239412] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X [ 5.259566] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 5.259575] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.259580] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 5.259584] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20130517/utaddress-251) [ 5.259588] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.259590] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 5.259594] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20130517/utaddress-251) [ 5.259598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.259599] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.262008] cfg80211: Calling CRDA to update world regulatory domain [ 5.297335] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 1502 detected [ 5.301762] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected [ 5.319595] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.320721] systemd-udevd[612]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1 1 3': No such file or directory [ 5.321416] systemd-udevd[613]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 1 4': No such file or directory [ 5.338476] device-mapper: multipath: version 1.6.0 loaded [ 5.342923] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15 [ 5.361864] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 5.370604] Linux video capture interface: v2.00 [ 5.383563] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b2f8) [ 5.383766] mute LED gpio 1 polarity 0 [ 5.383958] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 5.383961] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.383963] hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 5.383964] mono: mono_out=0x0 [ 5.383965] inputs: [ 5.383968] Internal Mic=0x11 [ 5.383969] Mic=0xa [ 5.394933] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6 [ 5.395060] usbcore: registered new interface driver uvcvideo [ 5.395063] USB Video Class driver (1.1.1) [ 5.410920] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 [ 5.416577] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.416832] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.416984] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.453754] cfg80211: World regulatory domain updated: [ 5.453758] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.453760] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.453761] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.453763] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.453764] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.453765] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.464011] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15 [ 5.479551] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15 [ 5.480307] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15 [ 5.481078] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 5.569368] init: failsafe main process (755) killed by TERM signal [ 5.683844] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.805268] r8169 0000:05:00.0 eth0: link down [ 5.805308] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.805527] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.490126] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1096837