[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-11-generic (buildd@brownie) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu1) ) #31-Ubuntu SMP Wed Feb 19 19:57:21 UTC 2014 (Ubuntu 3.13.0-11.31-generic 3.13.3) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-11-generic root=UUID=225aabc5-9098-412c-9cf1-4b06f8ec4c80 ro quiet splash elevator=deadline nomdmonddf nomdmonisw vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 3503 05/06/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000330000000 aka 13056M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdb000, 0x01fdbfff] PGTABLE [ 0.000000] BRK [0x01fdc000, 0x01fdcfff] PGTABLE [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x32fe00000-0x32fffffff] [ 0.000000] [mem 0x32fe00000-0x32fffffff] page 2M [ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x32c000000-0x32fdfffff] [ 0.000000] [mem 0x32c000000-0x32fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff] [ 0.000000] [mem 0x300000000-0x32bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfe8ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcfe8ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff] [ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x34d06000-0x3667afff] [ 0.000000] ACPI: RSDP 00000000000fb860 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cfe90100 00005C (v01 050611 XSDT1157 20110506 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cfe90290 0000F4 (v03 050611 FACP1157 20110506 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603) [ 0.000000] ACPI: DSDT 00000000cfe90450 00E856 (v01 A1160 A1160000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cfea8000 000040 [ 0.000000] ACPI: APIC 00000000cfe90390 00007C (v01 050611 APIC1157 20110506 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cfe90410 00003C (v01 050611 OEMMCFG 20110506 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cfea8040 000072 (v01 050611 OEMB1157 20110506 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cfe9f450 0000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cfe9f540 000038 (v01 050611 OEMHPET 20110506 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cfe9f580 00088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x32fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x32fffffff] -> [mem 0x00000000-0x32fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x32fffffff] [ 0.000000] NODE_DATA [mem 0x32fff9000-0x32fffdfff] [ 0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x32fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xcfe8ffff] [ 0.000000] node 0: [mem 0x100000000-0x32fffffff] [ 0.000000] On node 0 totalpages: 3145261 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13243 pages used for memmap [ 0.000000] DMA32 zone: 847504 pages, LIFO batch:31 [ 0.000000] Normal zone: 35840 pages used for memmap [ 0.000000] Normal zone: 2293760 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe90000-0xcfea7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfea8000-0xcfecffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfed0000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xffefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.000000] e820: [mem 0xcff00000-0xffefffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88032fc00000 s86400 r8192 d24192 u262144 [ 0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096093 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-11-generic root=UUID=225aabc5-9098-412c-9cf1-4b06f8ec4c80 ro quiet splash elevator=deadline nomdmonddf nomdmonisw vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 12209464K/12581044K available (7340K kernel code, 1139K rwdata, 3388K rodata, 1332K init, 1436K bss, 371580K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-5. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2608.643 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5217.28 BogoMIPS (lpj=10434572) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000029] Security Framework initialized [ 0.000045] AppArmor: AppArmor initialized [ 0.000046] Yama: becoming mindful. [ 0.001091] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.006035] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008169] Mount-cache hash table entries: 256 [ 0.008352] Initializing cgroup subsys memory [ 0.008359] Initializing cgroup subsys devices [ 0.008361] Initializing cgroup subsys freezer [ 0.008363] Initializing cgroup subsys blkio [ 0.008364] Initializing cgroup subsys perf_event [ 0.008367] Initializing cgroup subsys hugetlb [ 0.008384] tseg: 0000000000 [ 0.008390] CPU: Physical Processor ID: 0 [ 0.008392] CPU: Processor Core ID: 0 [ 0.008393] mce: CPU supports 6 MCE banks [ 0.008398] LVT offset 0 assigned for vector 0xf9 [ 0.008402] process: using AMD E400 aware idle routine [ 0.008404] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.008404] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.008404] tlb_flushall_shift: 4 [ 0.008488] Freeing SMP alternatives memory: 28K (ffffffff81e6b000 - ffffffff81e72000) [ 0.009228] ACPI: Core revision 20131115 [ 0.013009] ACPI: All ACPI Tables successfully acquired [ 0.020265] ftrace: allocating 28427 entries in 112 pages [ 0.032349] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072082] smpboot: CPU0: AMD Phenom(tm) II X4 810 Processor (fam: 10, model: 04, stepping: 02) [ 0.179910] Performance Events: AMD PMU driver. [ 0.179914] ... version: 0 [ 0.179915] ... bit width: 48 [ 0.179916] ... generic registers: 4 [ 0.179917] ... value mask: 0000ffffffffffff [ 0.179918] ... max period: 00007fffffffffff [ 0.179919] ... fixed-purpose events: 0 [ 0.179920] ... event mask: 000000000000000f [ 0.181480] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.181563] x86: Booting SMP configuration: [ 0.194667] process: System has AMD C1E enabled [ 0.194679] process: Switch to broadcast mode on CPU1 [ 0.207809] process: Switch to broadcast mode on CPU2 [ 0.181564] .... node #0, CPUs: #1 #2 #3 [ 0.220889] x86: Booted up 1 node, 4 CPUs [ 0.220892] smpboot: Total of 4 processors activated (20869.14 BogoMIPS) [ 0.220943] process: Switch to broadcast mode on CPU3 [ 0.224207] process: Switch to broadcast mode on CPU0 [ 0.224387] devtmpfs: initialized [ 0.228402] EVM: security.selinux [ 0.228404] EVM: security.SMACK64 [ 0.228405] EVM: security.ima [ 0.228406] EVM: security.capability [ 0.228510] PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes) [ 0.229446] pinctrl core: initialized pinctrl subsystem [ 0.229512] regulator-dummy: no parameters [ 0.229541] RTC time: 23:16:36, date: 02/27/14 [ 0.229579] NET: Registered protocol family 16 [ 0.229696] cpuidle: using governor ladder [ 0.229698] cpuidle: using governor menu [ 0.229703] node 0 link 0: io port [1000, ffffff] [ 0.229705] TOM: 00000000d0000000 aka 3328M [ 0.229707] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.229710] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.229713] node 0 link 0: mmio [f0000000, ffffffff] [ 0.229715] node 0 link 0: mmio [a0000, bffff] [ 0.229717] node 0 link 0: mmio [d0000000, dfffffff] [ 0.229719] TOM2: 0000000330000000 aka 13056M [ 0.229721] bus: [bus 00-07] on node 0 link 0 [ 0.229722] bus: 00 [io 0x0000-0xffff] [ 0.229723] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.229725] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.229726] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.229727] bus: 00 [mem 0x330000000-0xfcffffffff] [ 0.229808] ACPI: bus type PCI registered [ 0.229810] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.229865] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.229868] PCI: not using MMCONFIG [ 0.229869] PCI: Using configuration type 1 for base access [ 0.229870] PCI: Using configuration type 1 for extended access [ 0.230115] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.230116] mtrr: probably your BIOS does not setup all CPUs. [ 0.230117] mtrr: corrected configuration. [ 0.230964] bio: create slab at 0 [ 0.231132] ACPI: Added _OSI(Module Device) [ 0.231133] ACPI: Added _OSI(Processor Device) [ 0.231135] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.231136] ACPI: Added _OSI(Processor Aggregator Device) [ 0.234192] ACPI: Executed 3 blocks of module-level executable AML code [ 0.411384] ACPI: Interpreter enabled [ 0.411397] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.411412] ACPI: (supports S0 S1 S3 S4 S5) [ 0.411414] ACPI: Using IOAPIC for interrupt routing [ 0.411435] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.412377] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.421556] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.421650] ACPI: No dock devices found. [ 0.426933] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.426938] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.426943] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.427241] PCI host bridge to bus 0000:00 [ 0.427244] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.427246] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.427248] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.427250] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.427252] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.427254] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff] [ 0.427256] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.427266] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000 [ 0.427280] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.427373] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 0.427412] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.427453] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.427484] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400 [ 0.427523] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.427563] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.427590] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400 [ 0.427628] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.427670] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.427698] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400 [ 0.427737] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.427777] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.427802] pci 0000:00:0b.0: [1002:5980] type 01 class 0x060400 [ 0.427840] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.427881] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 0.427917] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.427935] pci 0000:00:11.0: reg 0x10: [io 0x7000-0x7007] [ 0.427946] pci 0000:00:11.0: reg 0x14: [io 0x6000-0x6003] [ 0.427956] pci 0000:00:11.0: reg 0x18: [io 0x5000-0x5007] [ 0.427966] pci 0000:00:11.0: reg 0x1c: [io 0x4000-0x4003] [ 0.427977] pci 0000:00:11.0: reg 0x20: [io 0x3000-0x300f] [ 0.427987] pci 0000:00:11.0: reg 0x24: [mem 0xfbafe400-0xfbafe7ff] [ 0.428082] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.428096] pci 0000:00:12.0: reg 0x10: [mem 0xfbaf6000-0xfbaf6fff] [ 0.428191] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.428218] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.428233] pci 0000:00:12.1: reg 0x10: [mem 0xfbaf7000-0xfbaf7fff] [ 0.428327] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.428360] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.428380] pci 0000:00:12.2: reg 0x10: [mem 0xfbafe800-0xfbafe8ff] [ 0.428471] pci 0000:00:12.2: supports D1 D2 [ 0.428472] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.428515] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.428547] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.428562] pci 0000:00:13.0: reg 0x10: [mem 0xfbafc000-0xfbafcfff] [ 0.428657] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.428684] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.428698] pci 0000:00:13.1: reg 0x10: [mem 0xfbafd000-0xfbafdfff] [ 0.428793] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.428825] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.428845] pci 0000:00:13.2: reg 0x10: [mem 0xfbafec00-0xfbafecff] [ 0.428935] pci 0000:00:13.2: supports D1 D2 [ 0.428937] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.428980] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.429015] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.429171] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.429189] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.429199] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.429209] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.429219] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.429230] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 0.429340] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.429364] pci 0000:00:14.2: reg 0x10: [mem 0xfbaf8000-0xfbafbfff 64bit] [ 0.429436] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.429476] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.429503] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.429629] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.429699] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.429724] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.429739] pci 0000:00:14.5: reg 0x10: [mem 0xfbaff000-0xfbafffff] [ 0.429834] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.429864] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.429929] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.429988] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.430048] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.430112] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.430224] pci 0000:06:00.0: [1002:6818] type 00 class 0x030000 [ 0.430237] pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.430247] pci 0000:06:00.0: reg 0x18: [mem 0xfbf80000-0xfbfbffff 64bit] [ 0.430254] pci 0000:06:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.430265] pci 0000:06:00.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref] [ 0.430301] pci 0000:06:00.0: supports D1 D2 [ 0.430303] pci 0000:06:00.0: PME# supported from D1 D2 D3hot [ 0.430346] pci 0000:06:00.1: [1002:aab0] type 00 class 0x040300 [ 0.430358] pci 0000:06:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff 64bit] [ 0.430418] pci 0000:06:00.1: supports D1 D2 [ 0.439071] pci 0000:00:02.0: PCI bridge to [bus 06] [ 0.439075] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.439078] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.439082] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.439135] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.439150] pci 0000:05:00.0: reg 0x10: [io 0xd800-0xd8ff] [ 0.439175] pci 0000:05:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit] [ 0.439204] pci 0000:05:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref] [ 0.439268] pci 0000:05:00.0: supports D1 D2 [ 0.439270] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.439309] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.439316] pci 0000:00:06.0: PCI bridge to [bus 05] [ 0.439320] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.439322] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.439383] pci 0000:04:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.439414] pci 0000:04:00.0: reg 0x10: [mem 0xfbdff800-0xfbdfffff 64bit] [ 0.439430] pci 0000:04:00.0: reg 0x18: [io 0xc800-0xc8ff] [ 0.439564] pci 0000:04:00.0: supports D2 [ 0.439565] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold [ 0.447087] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.447091] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff] [ 0.447094] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.447155] pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000 [ 0.447176] pci 0000:03:00.0: reg 0x10: [mem 0xfbce0000-0xfbcfffff] [ 0.447191] pci 0000:03:00.0: reg 0x14: [mem 0xfbc00000-0xfbc7ffff] [ 0.447206] pci 0000:03:00.0: reg 0x18: [io 0xbc00-0xbc1f] [ 0.447221] pci 0000:03:00.0: reg 0x1c: [mem 0xfbcdc000-0xfbcdffff] [ 0.447262] pci 0000:03:00.0: reg 0x30: [mem 0xfbc80000-0xfbcbffff pref] [ 0.447342] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.455093] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 0.455097] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 0.455100] pci 0000:00:0a.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.455151] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 [ 0.455167] pci 0000:02:00.0: reg 0x10: [io 0xa080-0xa087] [ 0.455178] pci 0000:02:00.0: reg 0x14: [io 0xa000-0xa003] [ 0.455189] pci 0000:02:00.0: reg 0x18: [io 0x9c00-0x9c07] [ 0.455201] pci 0000:02:00.0: reg 0x1c: [io 0x9880-0x9883] [ 0.455212] pci 0000:02:00.0: reg 0x20: [io 0x9800-0x980f] [ 0.455223] pci 0000:02:00.0: reg 0x24: [mem 0xfbbff000-0xfbbff7ff] [ 0.455234] pci 0000:02:00.0: reg 0x30: [mem 0xfbbd0000-0xfbbdffff pref] [ 0.455285] pci 0000:02:00.0: PME# supported from D3hot [ 0.455341] pci 0000:02:00.1: [1b4b:91a4] type 00 class 0x01018f [ 0.455356] pci 0000:02:00.1: reg 0x10: [io 0xac00-0xac07] [ 0.455367] pci 0000:02:00.1: reg 0x14: [io 0xa880-0xa883] [ 0.455378] pci 0000:02:00.1: reg 0x18: [io 0xa800-0xa807] [ 0.455390] pci 0000:02:00.1: reg 0x1c: [io 0xa480-0xa483] [ 0.455401] pci 0000:02:00.1: reg 0x20: [io 0xa400-0xa40f] [ 0.455412] pci 0000:02:00.1: reg 0x24: [mem 0xfbbffc00-0xfbbffc0f] [ 0.455423] pci 0000:02:00.1: reg 0x30: [mem 0xfbbe0000-0xfbbeffff pref] [ 0.455476] pci 0000:02:00.1: PME# supported from D3hot [ 0.463103] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.463107] pci 0000:00:0b.0: bridge window [io 0x9000-0xafff] [ 0.463109] pci 0000:00:0b.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.463151] pci 0000:01:06.0: [10e8:80bc] type 00 class 0x100000 [ 0.463169] pci 0000:01:06.0: reg 0x10: [io 0x8c00-0x8c3f] [ 0.463307] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 0.463312] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff] [ 0.463318] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.463320] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.463322] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.463324] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.463326] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) [ 0.463328] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.464014] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.464057] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.464098] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15) [ 0.464138] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.464178] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.464218] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15) [ 0.464258] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.464298] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.464506] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.464512] ACPI: \_SB_.PCI0: notify handler is installed [ 0.464547] Found 1 acpi root devices [ 0.464658] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.464661] vgaarb: loaded [ 0.464662] vgaarb: bridge control possible 0000:06:00.0 [ 0.464823] SCSI subsystem initialized [ 0.464898] libata version 3.00 loaded. [ 0.464925] ACPI: bus type USB registered [ 0.464941] usbcore: registered new interface driver usbfs [ 0.464949] usbcore: registered new interface driver hub [ 0.464974] usbcore: registered new device driver usb [ 0.465105] PCI: Using ACPI for IRQ routing [ 0.474360] PCI: pci_cache_line_size set to 64 bytes [ 0.474368] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.474444] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff] [ 0.474447] e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff] [ 0.474532] NetLabel: Initializing [ 0.474533] NetLabel: domain hash size = 128 [ 0.474534] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.474545] NetLabel: unlabeled traffic allowed by default [ 0.474628] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.474632] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.476709] Switched to clocksource hpet [ 0.481896] AppArmor: AppArmor Filesystem Enabled [ 0.481918] pnp: PnP ACPI init [ 0.481928] ACPI: bus type PNP registered [ 0.481979] pnp 00:00: [dma 4] [ 0.482001] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.482033] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.482053] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.482074] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.482132] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.482239] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.482242] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.482245] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.482488] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.482490] system 00:06: [io 0x040b] has been reserved [ 0.482492] system 00:06: [io 0x04d6] has been reserved [ 0.482494] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 0.482496] system 00:06: [io 0x0c14] has been reserved [ 0.482498] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 0.482500] system 00:06: [io 0x0c52] has been reserved [ 0.482502] system 00:06: [io 0x0c6c] has been reserved [ 0.482504] system 00:06: [io 0x0c6f] has been reserved [ 0.482506] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ 0.482508] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ 0.482510] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 0.482512] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 0.482514] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 0.482516] system 00:06: [io 0x0b00-0x0b3f] has been reserved [ 0.482518] system 00:06: [io 0x0800-0x089f] could not be reserved [ 0.482520] system 00:06: [io 0x0b00-0x0b0f] has been reserved [ 0.482522] system 00:06: [io 0x0b20-0x0b3f] has been reserved [ 0.482524] system 00:06: [io 0x0900-0x090f] has been reserved [ 0.482527] system 00:06: [io 0x0910-0x091f] has been reserved [ 0.482529] system 00:06: [io 0xfe00-0xfefe] has been reserved [ 0.482531] system 00:06: [mem 0xcff00000-0xcfffffff] has been reserved [ 0.482534] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.482536] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.482538] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.482908] pnp 00:07: [dma 0 disabled] [ 0.482976] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.483333] system 00:08: [io 0x0230-0x023f] has been reserved [ 0.483336] system 00:08: [io 0x0290-0x029f] has been reserved [ 0.483338] system 00:08: [io 0x0f40-0x0f4f] has been reserved [ 0.483340] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 0.483342] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.483396] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.483399] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.483493] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.483496] pnp 00:0a: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.483499] pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.483501] pnp 00:0a: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.483531] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.483533] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.483629] pnp: PnP ACPI: found 11 devices [ 0.483631] ACPI: bus type PNP unregistered [ 0.490501] pci 0000:00:02.0: PCI bridge to [bus 06] [ 0.490505] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.490508] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.490511] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.490515] pci 0000:00:06.0: PCI bridge to [bus 05] [ 0.490518] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.490521] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.490525] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.490528] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff] [ 0.490531] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.490535] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 0.490537] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 0.490540] pci 0000:00:0a.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.490545] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.490547] pci 0000:00:0b.0: bridge window [io 0x9000-0xafff] [ 0.490550] pci 0000:00:0b.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.490555] pci 0000:00:14.4: PCI bridge to [bus 01] [ 0.490558] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff] [ 0.490570] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.490572] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.490574] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.490576] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.490578] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.490579] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.490581] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.490583] pci_bus 0000:06: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.490585] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.490587] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.490589] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.490591] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.490593] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.490595] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.490596] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.490598] pci_bus 0000:02: resource 0 [io 0x9000-0xafff] [ 0.490600] pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.490602] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff] [ 0.490604] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.490605] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.490607] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.490609] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.490611] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.490613] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.490643] NET: Registered protocol family 2 [ 0.490841] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.491197] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.491479] TCP: Hash tables configured (established 131072 bind 65536) [ 0.491515] TCP: reno registered [ 0.491534] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.491633] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.491774] NET: Registered protocol family 1 [ 0.881407] pci 0000:06:00.0: Boot video device [ 0.881427] PCI: CLS 64 bytes, default 64 [ 0.881484] Trying to unpack rootfs image as initramfs... [ 1.310989] Freeing initrd memory: 26068K (ffff880034d06000 - ffff88003667b000) [ 1.312760] PCI-DMA: Disabling AGP. [ 1.312834] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.312836] PCI-DMA: using GART IOMMU. [ 1.312838] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.316356] LVT offset 1 assigned for vector 0x400 [ 1.316366] IBS: LVT offset 1 assigned [ 1.316394] perf: AMD IBS detected (0x0000001f) [ 1.316423] Scanning for low memory corruption every 60 seconds [ 1.316648] Initialise system trusted keyring [ 1.316689] audit: initializing netlink socket (disabled) [ 1.316706] type=2000 audit(1393542996.204:1): initialized [ 1.344600] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.346089] zbud: loaded [ 1.346241] VFS: Disk quotas dquot_6.5.2 [ 1.346284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.346759] fuse init (API version 7.22) [ 1.346829] msgmni has been set to 24026 [ 1.346878] Key type big_key registered [ 1.347526] Key type asymmetric registered [ 1.347528] Asymmetric key parser 'x509' registered [ 1.347555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.347615] io scheduler noop registered [ 1.347616] io scheduler deadline registered (default) [ 1.347638] io scheduler cfq registered [ 1.347857] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.347992] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 1.348125] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X [ 1.348254] pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X [ 1.348386] pcieport 0000:00:0b.0: irq 44 for MSI/MSI-X [ 1.348438] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.348450] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.348496] ipmi message handler version 39.2 [ 1.348503] IPMI System Interface driver. [ 1.348523] ipmi_si: Adding default-specified kcs state machine [ 1.348526] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 1.348531] ipmi_si: Interface detection failed [ 1.353922] ipmi_si: Adding default-specified smic state machine [ 1.353927] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 1.353932] ipmi_si: Interface detection failed [ 1.365924] ipmi_si: Adding default-specified bt state machine [ 1.365925] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 1.365931] ipmi_si: Interface detection failed [ 1.373949] ipmi_si: Unable to find any System Interface(s) [ 1.374570] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.374574] ACPI: Power Button [PWRB] [ 1.374607] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.374609] ACPI: Power Button [PWRF] [ 1.374663] ACPI: processor limited to max C-state 1 [ 1.375483] GHES: HEST is not enabled! [ 1.375579] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.396097] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.397586] Linux agpgart interface v0.103 [ 1.399008] brd: module loaded [ 1.399744] loop: module loaded [ 1.400087] libphy: Fixed MDIO Bus: probed [ 1.400162] tun: Universal TUN/TAP device driver, 1.6 [ 1.400163] tun: (C) 1999-2004 Max Krasnyansky [ 1.400217] PPP generic driver version 2.4.2 [ 1.400258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.400262] ehci-pci: EHCI PCI platform driver [ 1.400390] QUIRK: Enable AMD PLL fix [ 1.400409] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.400415] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.400419] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.400421] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.400435] ehci-pci 0000:00:12.2: debug port 1 [ 1.400478] ehci-pci 0000:00:12.2: irq 17, io mem 0xfbafe800 [ 1.409957] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.410006] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.410008] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.410010] usb usb1: Product: EHCI Host Controller [ 1.410012] usb usb1: Manufacturer: Linux 3.13.0-11-generic ehci_hcd [ 1.410013] usb usb1: SerialNumber: 0000:00:12.2 [ 1.410109] hub 1-0:1.0: USB hub found [ 1.410116] hub 1-0:1.0: 6 ports detected [ 1.410342] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.410346] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.410349] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.410351] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.410364] ehci-pci 0000:00:13.2: debug port 1 [ 1.410399] ehci-pci 0000:00:13.2: irq 19, io mem 0xfbafec00 [ 1.421971] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.422001] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.422003] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.422005] usb usb2: Product: EHCI Host Controller [ 1.422007] usb usb2: Manufacturer: Linux 3.13.0-11-generic ehci_hcd [ 1.422008] usb usb2: SerialNumber: 0000:00:13.2 [ 1.422097] hub 2-0:1.0: USB hub found [ 1.422103] hub 2-0:1.0: 6 ports detected [ 1.422217] ehci-platform: EHCI generic platform driver [ 1.422225] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.422226] ohci-pci: OHCI PCI platform driver [ 1.422334] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.422338] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.422357] ohci-pci 0000:00:12.0: irq 16, io mem 0xfbaf6000 [ 1.482044] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.482046] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.482048] usb usb3: Product: OHCI PCI host controller [ 1.482050] usb usb3: Manufacturer: Linux 3.13.0-11-generic ohci_hcd [ 1.482051] usb usb3: SerialNumber: 0000:00:12.0 [ 1.482161] hub 3-0:1.0: USB hub found [ 1.482169] hub 3-0:1.0: 3 ports detected [ 1.482336] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.482340] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.482351] ohci-pci 0000:00:12.1: irq 16, io mem 0xfbaf7000 [ 1.542120] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.542122] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.542124] usb usb4: Product: OHCI PCI host controller [ 1.542126] usb usb4: Manufacturer: Linux 3.13.0-11-generic ohci_hcd [ 1.542127] usb usb4: SerialNumber: 0000:00:12.1 [ 1.542235] hub 4-0:1.0: USB hub found [ 1.542243] hub 4-0:1.0: 3 ports detected [ 1.542412] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.542417] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.542435] ohci-pci 0000:00:13.0: irq 18, io mem 0xfbafc000 [ 1.602192] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.602194] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.602195] usb usb5: Product: OHCI PCI host controller [ 1.602197] usb usb5: Manufacturer: Linux 3.13.0-11-generic ohci_hcd [ 1.602199] usb usb5: SerialNumber: 0000:00:13.0 [ 1.602313] hub 5-0:1.0: USB hub found [ 1.602321] hub 5-0:1.0: 3 ports detected [ 1.602487] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.602492] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.602505] ohci-pci 0000:00:13.1: irq 18, io mem 0xfbafd000 [ 1.662277] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.662279] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.662281] usb usb6: Product: OHCI PCI host controller [ 1.662282] usb usb6: Manufacturer: Linux 3.13.0-11-generic ohci_hcd [ 1.662284] usb usb6: SerialNumber: 0000:00:13.1 [ 1.662388] hub 6-0:1.0: USB hub found [ 1.662397] hub 6-0:1.0: 3 ports detected [ 1.662566] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.662570] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.662582] ohci-pci 0000:00:14.5: irq 18, io mem 0xfbaff000 [ 1.722315] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.722340] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.722343] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.722344] usb usb7: Product: OHCI PCI host controller [ 1.722346] usb usb7: Manufacturer: Linux 3.13.0-11-generic ohci_hcd [ 1.722348] usb usb7: SerialNumber: 0000:00:14.5 [ 1.722442] hub 7-0:1.0: USB hub found [ 1.722451] hub 7-0:1.0: 2 ports detected [ 1.722516] ohci-platform: OHCI generic platform driver [ 1.722523] uhci_hcd: USB Universal Host Controller Interface driver [ 1.722576] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.723141] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.723148] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.723273] mousedev: PS/2 mouse device common for all mice [ 1.723411] rtc_cmos 00:01: RTC can wake from S4 [ 1.723524] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.723551] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.723606] device-mapper: uevent: version 1.0.3 [ 1.723664] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.723670] ledtrig-cpu: registered to indicate activity on CPUs [ 1.723758] TCP: cubic registered [ 1.723837] NET: Registered protocol family 10 [ 1.723998] NET: Registered protocol family 17 [ 1.724006] Key type dns_resolver registered [ 1.724308] Loading compiled-in X.509 certificates [ 1.725357] Loaded X.509 cert 'Magrathea: Glacier signing key: 0eaba770ef754c46e356b032e5065130fe98f60e' [ 1.725367] registered taskstats version 1 [ 1.728353] Key type trusted registered [ 1.730564] Key type encrypted registered [ 1.732770] AppArmor: AppArmor sha1 policy hashing enabled [ 1.732774] IMA: No TPM chip found, activating TPM-bypass! [ 1.733175] Magic number: 2:166:303 [ 1.733200] tty tty32: hash matches [ 1.733273] rtc_cmos 00:01: setting system clock to 2014-02-27 23:16:37 UTC (1393542997) [ 1.733372] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.733766] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.733767] EDD information not available. [ 1.733787] PM: Hibernation image not present or could not be loaded. [ 1.735150] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000) [ 1.735153] Write protecting the kernel read-only data: 12288k [ 1.737427] Freeing unused kernel memory: 840K (ffff88000172e000 - ffff880001800000) [ 1.739229] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000) [ 1.753756] systemd-udevd[122]: starting version 204 [ 1.764263] wmi: Mapper loaded [ 1.771817] pps_core: LinuxPPS API ver. 1 registered [ 1.771820] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.773147] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.773162] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.773231] PTP clock support registered [ 1.773385] r8169 0000:05:00.0: irq 45 for MSI/MSI-X [ 1.773563] r8169 0000:05:00.0 eth0: RTL8168b/8111b at 0xffffc90001818000, 00:24:8c:3b:c7:00, XID 18000000 IRQ 45 [ 1.773566] r8169 0000:05:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.779991] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.779994] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.780288] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.780314] e1000e 0000:03:00.0: irq 46 for MSI/MSI-X [ 1.780321] e1000e 0000:03:00.0: irq 47 for MSI/MSI-X [ 1.780328] e1000e 0000:03:00.0: irq 48 for MSI/MSI-X [ 1.780692] scsi0 : pata_atiixp [ 1.780788] scsi1 : pata_atiixp [ 1.780839] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.780840] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.780890] ahci 0000:00:11.0: version 3.0 [ 1.781111] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.781114] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 1.782055] scsi2 : ahci [ 1.782258] scsi3 : ahci [ 1.782518] scsi4 : ahci [ 1.782540] scsi5 : pata_marvell [ 1.782619] scsi6 : ahci [ 1.782697] scsi8 : ahci [ 1.782742] scsi7 : pata_marvell [ 1.782777] ata9: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 16 [ 1.782779] ata10: PATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 16 [ 1.782824] scsi9 : ahci [ 1.782859] ata3: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe500 irq 22 [ 1.782862] ata4: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe580 irq 22 [ 1.782864] ata5: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe600 irq 22 [ 1.782867] ata6: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe680 irq 22 [ 1.782870] ata7: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe700 irq 22 [ 1.782873] ata8: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe780 irq 22 [ 1.782976] ahci 0000:02:00.0: irq 49 for MSI/MSI-X [ 1.783033] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.783036] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.783374] scsi10 : ahci [ 1.783474] scsi11 : ahci [ 1.783509] ata11: SATA max UDMA/133 abar m2048@0xfbbff000 port 0xfbbff100 irq 49 [ 1.783512] ata12: SATA max UDMA/133 abar m2048@0xfbbff000 port 0xfbbff180 irq 49 [ 1.850539] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.867850] usb 1-1: New USB device found, idVendor=1415, idProduct=4000 [ 1.867854] usb 1-1: New USB device strings: Mfr=10, Product=11, SerialNumber=0 [ 1.867857] usb 1-1: Product: USB 2.0 HUB [ 1.867859] usb 1-1: Manufacturer: SONY [ 1.868245] hub 1-1:1.0: USB hub found [ 1.868961] hub 1-1:1.0: 1 port detected [ 1.885881] e1000e 0000:03:00.0 eth1: registered PHC clock [ 1.885885] e1000e 0000:03:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:1a:09:50 [ 1.885887] e1000e 0000:03:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.885900] e1000e 0000:03:00.0 eth1: MAC: 3, PHY: 8, PBA No: E46981-008 [ 1.978679] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.106782] ata8: SATA link down (SStatus 0 SControl 300) [ 2.116747] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 2.116750] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.116752] usb 1-2: Product: USB2.0 Hub [ 2.117141] hub 1-2:1.0: USB hub found [ 2.117493] hub 1-2:1.0: 4 ports detected [ 2.275028] ata3: softreset failed (device not ready) [ 2.275032] ata3: applying PMP SRST workaround and retrying [ 2.275048] ata5: softreset failed (device not ready) [ 2.275051] ata5: applying PMP SRST workaround and retrying [ 2.275068] ata4: softreset failed (device not ready) [ 2.275072] ata4: applying PMP SRST workaround and retrying [ 2.275088] ata6: softreset failed (device not ready) [ 2.275093] ata6: applying PMP SRST workaround and retrying [ 2.279027] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.280025] ata11.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133 [ 2.280027] ata11.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.281195] ata11.00: configured for UDMA/133 [ 2.283045] ata7: softreset failed (device not ready) [ 2.283048] ata7: applying PMP SRST workaround and retrying [ 2.283057] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 330) [ 2.285933] ata12.00: ATA-8: WDC WD15EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 2.285935] ata12.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.288849] ata12.00: configured for UDMA/133 [ 2.343100] tsc: Refined TSC clocksource calibration: 2608.796 MHz [ 2.351170] firewire_core 0000:04:00.0: created device fw0: GUID fedcba9876543210, S400 [ 2.447247] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.447272] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.447293] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.448469] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 [ 2.449985] ata3.00: configured for UDMA/100 [ 2.451762] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 [ 2.453899] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.453901] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.454003] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.454069] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 2.455249] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.455271] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.464723] ata6.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133 [ 2.464726] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.465887] ata6.00: configured for UDMA/133 [ 2.472844] ata7.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133 [ 2.472845] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.474068] ata7.00: configured for UDMA/133 [ 2.475963] ata4.00: ATA-8: MAXTOR STM3320613AS, MC1H, max UDMA/133 [ 2.475965] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.483909] ata5.00: ATA-8: MAXTOR STM3320613AS, MC1H, max UDMA/133 [ 2.483911] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.517823] ata4.00: configured for UDMA/133 [ 2.517977] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332061 MC1H PQ: 0 ANSI: 5 [ 2.518125] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.518127] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 2.518231] sd 3:0:0:0: [sda] Write Protect is off [ 2.518233] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.518286] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.524769] sda: sda1 [ 2.525050] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.525766] ata5.00: configured for UDMA/133 [ 2.525873] scsi 4:0:0:0: Direct-Access ATA MAXTOR STM332061 MC1H PQ: 0 ANSI: 5 [ 2.526008] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.526025] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2.526108] sd 4:0:0:0: [sdb] Write Protect is off [ 2.526111] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.526153] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.526190] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5 [ 2.526307] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.526313] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 2.526359] sd 6:0:0:0: [sdc] Write Protect is off [ 2.526361] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.526382] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.526417] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5 [ 2.526546] sd 8:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.526548] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 2.526604] sd 8:0:0:0: [sdd] Write Protect is off [ 2.526606] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.526667] scsi 10:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5 [ 2.526669] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.526777] sd 10:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 2.526790] sd 10:0:0:0: Attached scsi generic sg5 type 0 [ 2.526840] sd 10:0:0:0: [sde] Write Protect is off [ 2.526843] sd 10:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.526882] sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.526912] scsi 11:0:0:0: Direct-Access ATA WDC WD15EARS-00M 51.0 PQ: 0 ANSI: 5 [ 2.527020] sd 11:0:0:0: Attached scsi generic sg6 type 0 [ 2.527046] sd 11:0:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 2.527137] sd 11:0:0:0: [sdf] Write Protect is off [ 2.527139] sd 11:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 2.527179] sd 11:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.527255] sde: sde1 [ 2.527451] sd 10:0:0:0: [sde] Attached SCSI disk [ 2.529085] sdd: sdd1 [ 2.529403] sd 8:0:0:0: [sdd] Attached SCSI disk [ 2.536377] sdc: [ 2.536635] sd 6:0:0:0: [sdc] Attached SCSI disk [ 2.552766] sdb: sdb1 [ 2.553092] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.703545] usb 4-1: new low-speed USB device number 2 using ohci-pci [ 2.885861] usb 4-1: New USB device found, idVendor=046d, idProduct=c31b [ 2.885865] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.885867] usb 4-1: Product: Logitech USB Keyboard [ 2.885869] usb 4-1: Manufacturer: Logitech [ 2.896048] hidraw: raw HID events driver (C) Jiri Kosina [ 2.920088] usbcore: registered new interface driver usbhid [ 2.920090] usbhid: USB HID core driver [ 2.921773] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input4 [ 2.921874] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-1/input0 [ 2.925052] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input5 [ 2.925158] hid-generic 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-1/input1 [ 2.975000] sdf: sdf1 sdf2 [ 2.975322] sd 11:0:0:0: [sdf] Attached SCSI disk [ 3.010306] md: bind [ 3.017093] md: bind [ 3.022497] md: raid1 personality registered for level 1 [ 3.022805] md/raid1:md0: active with 2 out of 2 mirrors [ 3.022827] md0: detected capacity change from 0 to 500106674176 [ 3.031484] random: nonblocking pool is initialized [ 3.043461] md0: unknown partition table [ 3.156092] usb 4-3: new full-speed USB device number 3 using ohci-pci [ 3.244399] bio: create slab at 1 [ 3.328407] usb 4-3: New USB device found, idVendor=0711, idProduct=0230 [ 3.328411] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.328413] usb 4-3: Product: Targus Group Intl [ 3.328415] usb 4-3: Manufacturer: Targus Group Intl [ 3.328417] usb 4-3: SerialNumber: 543262 [ 3.330770] bio: create slab at 2 [ 3.344485] Switched to clocksource tsc [ 3.536972] usb 1-1.1: new high-speed USB device number 6 using ehci-pci [ 3.631954] usb 1-1.1: New USB device found, idVendor=1415, idProduct=2000 [ 3.631959] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.631961] usb 1-1.1: Product: USB Camera-B3.04.06.1 [ 3.631963] usb 1-1.1: Manufacturer: OmniVision Technologies, Inc. [ 3.957437] usb 1-2.1: new full-speed USB device number 7 using ehci-pci [ 4.056190] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c52b [ 4.056193] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.056195] usb 1-2.1: Product: USB Receiver [ 4.056196] usb 1-2.1: Manufacturer: Logitech [ 4.067919] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.1/input2 [ 4.071155] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0005/input/input6 [ 4.071258] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:12.2-2.1:1 [ 4.133638] usb 1-2.2: new high-speed USB device number 8 using ehci-pci [ 4.226872] usb 1-2.2: New USB device found, idVendor=f182, idProduct=0003 [ 4.226875] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.226876] usb 1-2.2: Product: Leap Dev Kit [ 4.226878] usb 1-2.2: Manufacturer: Leap Motion [ 4.297821] usb 1-2.4: new high-speed USB device number 9 using ehci-pci [ 4.390196] usb 1-2.4: config 1 interface 1 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 16 [ 4.390198] usb 1-2.4: config 1 interface 1 altsetting 0 bulk endpoint 0x86 has invalid maxpacket 16 [ 4.547559] md: linear personality registered for level -1 [ 4.550368] md: multipath personality registered for level -4 [ 4.553150] md: raid0 personality registered for level 0 [ 4.581207] usb 1-2.4: New USB device found, idVendor=1307, idProduct=0361 [ 4.581211] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.581213] usb 1-2.4: Product: MultiCard Device [ 4.581215] usb 1-2.4: Manufacturer: Generic [ 4.581217] usb 1-2.4: SerialNumber: 00000000000006 [ 4.584462] usb-storage 1-2.4:1.0: USB Mass Storage device detected [ 4.584531] scsi12 : usb-storage 1-2.4:1.0 [ 4.584609] usbcore: registered new interface driver usb-storage [ 4.625818] raid6: sse2x1 3590 MB/s [ 4.693893] raid6: sse2x2 5318 MB/s [ 4.761978] raid6: sse2x4 6776 MB/s [ 4.761979] raid6: using algorithm sse2x4 (6776 MB/s) [ 4.761981] raid6: using intx1 recovery algorithm [ 4.763299] xor: measuring software checksum speed [ 4.802021] prefetch64-sse: 10706.000 MB/sec [ 4.842070] generic_sse: 10114.000 MB/sec [ 4.842072] xor: using function: prefetch64-sse (10706.000 MB/sec) [ 4.843301] async_tx: api initialized (async) [ 4.850863] md: raid6 personality registered for level 6 [ 4.850866] md: raid5 personality registered for level 5 [ 4.850868] md: raid4 personality registered for level 4 [ 4.857374] md: raid10 personality registered for level 10 [ 4.980209] bio: create slab at 3 [ 4.980459] Btrfs loaded [ 5.583986] scsi 12:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2 [ 5.584601] scsi 12:0:0:1: Direct-Access Generic SD/MMC 0.00 PQ: 0 ANSI: 2 [ 5.585216] scsi 12:0:0:2: Direct-Access Generic microSD 0.00 PQ: 0 ANSI: 2 [ 5.585846] scsi 12:0:0:3: Direct-Access Generic MS/MS-PRO 0.00 PQ: 0 ANSI: 2 [ 5.586475] scsi 12:0:0:4: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2 [ 5.586667] sd 12:0:0:0: Attached scsi generic sg7 type 0 [ 5.586793] sd 12:0:0:1: Attached scsi generic sg8 type 0 [ 5.587073] sd 12:0:0:2: Attached scsi generic sg9 type 0 [ 5.587292] sd 12:0:0:3: Attached scsi generic sg10 type 0 [ 5.587441] sd 12:0:0:4: Attached scsi generic sg11 type 0 [ 5.609383] sd 12:0:0:0: [sdg] Attached SCSI removable disk [ 5.611256] sd 12:0:0:2: [sdi] Attached SCSI removable disk [ 5.612502] sd 12:0:0:4: [sdk] Attached SCSI removable disk [ 5.613753] sd 12:0:0:1: [sdh] Attached SCSI removable disk [ 5.615004] sd 12:0:0:3: [sdj] Attached SCSI removable disk [ 10.150005] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [ 10.556472] init: ureadahead main process (450) terminated with status 5 [ 10.701616] Adding 1558400k swap on /dev/sdf2. Priority:-1 extents:1 across:1558400k FS [ 10.726294] EXT4-fs (sde1): re-mounted. Opts: discard,errors=remount-ro [ 10.838098] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 10.867243] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: user_xattr [ 11.791896] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.791904] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.846810] FS-Cache: Loaded [ 11.855959] RPC: Registered named UNIX socket transport module. [ 11.855963] RPC: Registered udp transport module. [ 11.855964] RPC: Registered tcp transport module. [ 11.855966] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.868865] FS-Cache: Netfs 'nfs' registered for caching [ 11.885198] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 11.976891] systemd-udevd[694]: starting version 204 [ 12.031269] lp: driver loaded but no devices found [ 12.039074] it87: Found IT8720F chip at 0x290, revision 2 [ 12.039135] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20131115/utaddress-251) [ 12.039140] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SIOE 2 (20131115/utaddress-251) [ 12.039144] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.060983] usbcore: registered new interface driver iforce [ 12.077925] 8021q: 802.1Q VLAN Support v1.8 [ 12.092186] AMD IOMMUv2 driver by Joerg Roedel [ 12.092190] AMD IOMMUv2 functionality not available on this system [ 12.111296] systemd-udevd[756]: renamed network interface eth1 to eth2 [ 12.158725] device-mapper: multipath: version 1.6.0 loaded [ 12.170044] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251) [ 12.170050] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 2 (20131115/utaddress-251) [ 12.170055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.181408] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 12.182333] sp5100_tco: PCI Revision ID: 0x3a [ 12.182353] sp5100_tco: failed to find MMIO address, giving up. [ 12.186986] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 12.186990] Disabling lock debugging due to kernel taint [ 12.203729] Bluetooth: Core ver 2.17 [ 12.203798] NET: Registered protocol family 31 [ 12.203800] Bluetooth: HCI device and connection manager initialized [ 12.203809] Bluetooth: HCI socket layer initialized [ 12.203812] Bluetooth: L2CAP socket layer initialized [ 12.203871] Bluetooth: SCO socket layer initialized [ 12.206140] fglrx: module verification failed: signature and/or required key missing - tainting kernel [ 12.215313] <6>[fglrx] Maximum main memory to use for locked dma buffers: 11712 MBytes. [ 12.215678] <6>[fglrx] vendor: 1002 device: 6818 count: 1 [ 12.216866] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 12.218253] <6>[fglrx] Kernel PAT support is enabled [ 12.218274] <6>[fglrx] module loaded - fglrx 13.35.5 [Jan 29 2014] with 1 minors [ 12.222692] Bluetooth: RFCOMM TTY layer initialized [ 12.222705] Bluetooth: RFCOMM socket layer initialized [ 12.222711] Bluetooth: RFCOMM ver 1.11 [ 12.234713] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.234717] Bluetooth: BNEP filters: protocol multicast [ 12.234726] Bluetooth: BNEP socket layer initialized [ 12.243402] type=1400 audit(1393543007.995:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/avahi-daemon" pid=909 comm="apparmor_parser" [ 12.281077] hda-intel 0000:00:14.2: Using LPIB position fix [ 12.287177] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 12.307186] SKU: Nid=0x1d sku_cfg=0x4015e601 [ 12.307190] SKU: port_connectivity=0x1 [ 12.307192] SKU: enable_pcbeep=0x1 [ 12.307193] SKU: check_sum=0x00000005 [ 12.307194] SKU: customization=0x000000e6 [ 12.307195] SKU: external_amp=0x0 [ 12.307196] SKU: platform_type=0x0 [ 12.307197] SKU: swap=0x0 [ 12.307198] SKU: override=0x1 [ 12.307578] MCE: In-kernel MCE decoding enabled. [ 12.307750] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 12.307752] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.307754] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.307755] mono: mono_out=0x0 [ 12.307756] dig-out=0x11/0x1e [ 12.307757] inputs: [ 12.307759] Front Mic=0x19 [ 12.307760] Rear Mic=0x18 [ 12.307762] Line=0x1a [ 12.307763] realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d [ 12.307764] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888 [ 12.334267] init: avahi-cups-reload main process (1008) terminated with status 1 [ 12.348126] EDAC MC: Ver: 3.0.0 [ 12.350896] ppdev: user-space parallel port driver [ 12.363078] AMD64 EDAC driver v3.4.0 [ 12.389244] type=1400 audit(1393543008.139:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1081 comm="apparmor_parser" [ 12.389252] type=1400 audit(1393543008.139:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1081 comm="apparmor_parser" [ 12.389256] type=1400 audit(1393543008.139:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1081 comm="apparmor_parser" [ 12.389732] type=1400 audit(1393543008.139:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1081 comm="apparmor_parser" [ 12.389737] type=1400 audit(1393543008.139:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1081 comm="apparmor_parser" [ 12.389968] type=1400 audit(1393543008.139:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1081 comm="apparmor_parser" [ 12.391187] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 12.392887] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 12.392949] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 12.392996] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 12.393043] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 12.393086] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 12.393133] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 12.393178] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 12.393392] EDAC amd64: DRAM ECC disabled. [ 12.393400] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 12.393400] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 12.393400] (Note that use of the override may cause unknown side effects.) [ 12.397620] hda-intel 0000:06:00.1: Handle VGA-switcheroo audio client [ 12.397624] hda-intel 0000:06:00.1: Using LPIB position fix [ 12.397625] hda-intel 0000:06:00.1: Force to non-snoop mode [ 12.397667] snd_hda_intel 0000:06:00.1: irq 50 for MSI/MSI-X [ 12.405332] type=1400 audit(1393543008.155:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1094 comm="apparmor_parser" [ 12.405340] type=1400 audit(1393543008.155:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1094 comm="apparmor_parser" [ 12.405695] hda-intel 0000:06:00.1: Enable sync_write for stable communication [ 12.405847] type=1400 audit(1393543008.155:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1094 comm="apparmor_parser" [ 12.419087] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input20 [ 12.419318] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input19 [ 12.419544] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input18 [ 12.419952] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input17 [ 12.420040] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input16 [ 12.420139] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:06:00.1/sound/card1/input15 [ 12.436946] usbcore: registered new interface driver usbserial [ 12.436986] usbcore: registered new interface driver usbserial_generic [ 12.437010] usbserial: USB Serial support registered for generic [ 12.446096] usbcore: registered new interface driver mct_u232 [ 12.446126] usbserial: USB Serial support registered for MCT U232 [ 12.446145] mct_u232 4-3:1.0: MCT U232 converter detected [ 12.446331] Linux video capture interface: v2.00 [ 12.446544] usb 4-3: MCT U232 converter now attached to ttyUSB0 [ 12.448792] gspca_main: v2.14.0 registered [ 12.450551] gspca_main: ov534-2.14.0 probing 1415:2000 [ 12.514113] uvcvideo: Found UVC 1.00 device Leap Dev Kit (f182:0003) [ 12.621794] microcode: CPU0: patch_level=0x010000c6 [ 12.629208] microcode: CPU0: new patch_level=0x010000db [ 12.629221] microcode: CPU1: patch_level=0x010000c6 [ 12.629229] microcode: CPU1: new patch_level=0x010000db [ 12.629237] microcode: CPU2: patch_level=0x010000c6 [ 12.629246] microcode: CPU2: new patch_level=0x010000db [ 12.629254] microcode: CPU3: patch_level=0x010000c6 [ 12.629262] microcode: CPU3: new patch_level=0x010000db [ 12.629324] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 12.651678] kvm: Nested Virtualization enabled [ 12.651683] kvm: Nested Paging enabled [ 12.721019] r8169 0000:05:00.0 eth0: link down [ 12.721036] r8169 0000:05:00.0 eth0: link down [ 12.726427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.733425] device eth0 entered promiscuous mode [ 12.820446] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 12.820450] 8021q: adding VLAN 0 to HW filter on device eth2 [ 12.835340] systemd-udevd[1452]: failed to execute '/lib/udev/usb_modeswitch' 'usb_modeswitch --symlink-name /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/ttyUSB0/tty/ttyUSB0 0711 0230 ': No such file or directory [ 12.889451] systemd-udevd[757]: conflicting device node '/dev/mapper/pdc_bbbgggjccd1' found, link to '/dev/dm-0' will not be created [ 13.028670] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 13.254904] init: samba-ad-dc main process (1749) terminated with status 1 [ 13.273376] gre: GRE over IPv4 demultiplexor driver [ 13.284371] openvswitch: Open vSwitch switching datapath [ 13.634962] device ovs-system entered promiscuous mode [ 13.646879] device br-ex entered promiscuous mode [ 13.651257] device qg-36daef49-5b entered promiscuous mode [ 13.663031] device br0 entered promiscuous mode [ 13.663238] device eth2 entered promiscuous mode [ 13.679699] device qr-4113f48f-63 entered promiscuous mode [ 13.684641] device br-int entered promiscuous mode [ 13.690918] device tap4162ef36-c3 entered promiscuous mode [ 13.703514] device tap2eceb503-ea entered promiscuous mode [ 13.712030] device tap4e850e8c-4b entered promiscuous mode [ 13.731031] device tapa95b5477-e5 entered promiscuous mode [ 13.753789] device tap3b86fa14-33 entered promiscuous mode [ 13.794831] device tapb3329644-40 entered promiscuous mode [ 13.799290] device tapd280873c-ac entered promiscuous mode [ 14.103142] usbcore: registered new interface driver ov534 [ 14.112271] current rate 84948 is different from the runtime rate 16000 [ 14.114788] 3:1: cannot get min/max values for control 2 (id 3) [ 14.114971] usbcore: registered new interface driver snd-usb-audio [ 14.794578] r8169 0000:05:00.0 eth0: link up [ 14.794587] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.518157] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 17.518473] input: Leap Dev Kit as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input22 [ 17.518560] usbcore: registered new interface driver uvcvideo [ 17.518561] USB Video Class driver (1.1.1) [ 17.578050] init: udev-fallback-graphics main process (2532) terminated with status 1 [ 17.698978] e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.699278] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 20.928701] init: failsafe main process (1545) killed by TERM signal [ 20.946977] NET: Registered protocol family 15 [ 21.003120] AVX instructions are not detected. [ 21.051171] AVX instructions are not detected. [ 21.068279] AVX instructions are not detected. [ 21.096690] AVX or AES-NI instructions are not detected. [ 21.108118] AVX or AES-NI instructions are not detected. [ 21.145389] AVX instructions are not detected. [ 21.263501] audit_printk_skb: 24 callbacks suppressed [ 21.263505] type=1400 audit(1393543017.003:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=2946 comm="apparmor_parser" [ 21.263513] type=1400 audit(1393543017.003:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2946 comm="apparmor_parser" [ 21.263517] type=1400 audit(1393543017.003:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2946 comm="apparmor_parser" [ 21.263625] type=1400 audit(1393543017.003:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/bin/ping" pid=2944 comm="apparmor_parser" [ 21.263997] type=1400 audit(1393543017.003:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2946 comm="apparmor_parser" [ 21.264002] type=1400 audit(1393543017.003:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2946 comm="apparmor_parser" [ 21.264239] type=1400 audit(1393543017.003:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2946 comm="apparmor_parser" [ 21.264402] type=1400 audit(1393543017.003:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/share/gdm/guest-session/Xsession" pid=2945 comm="apparmor_parser" [ 21.265003] type=1400 audit(1393543017.003:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/klogd" pid=2947 comm="apparmor_parser" [ 21.266829] type=1400 audit(1393543017.007:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/syslog-ng" pid=2948 comm="apparmor_parser" [ 21.977912] Loading iSCSI transport class v2.0-870. [ 21.985467] iscsi: registered transport (tcp) [ 22.011034] iscsi: registered transport (iser) [ 22.198239] init: Failed to spawn tgt main process: unable to execute: No such file or directory [ 22.283943] nbd: registered device at major 43