[ 9.763942] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0 [ 9.776490] bbswitch: version 0.8 [ 9.776494] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 9.776497] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 9.776505] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 9.776549] bbswitch: detected an Optimus _DSM function [ 9.776557] pci 0000:01:00.0: enabling device (0006 -> 0007) [ 9.776580] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 9.777749] bbswitch: disabling discrete graphics [ 9.777757] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 9.797330] pci 0000:01:00.0: power state changed by ACPI to D3cold [ 9.820207] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.870959] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f01) [ 9.888556] psmouse serio1: elantech: Synaptics capabilities query result 0x50, 0x15, 0x0e. [ 9.982015] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input14 [ 11.079958] wlan0: authenticate with 00:1f:90:cd:53:d0 [ 11.084609] wlan0: send auth to 00:1f:90:cd:53:d0 (try 1/3) [ 11.086532] wlan0: authenticated [ 11.086633] iwlwifi 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 11.086635] iwlwifi 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 11.086637] wlan0: waiting for beacon from 00:1f:90:cd:53:d0 [ 11.170707] wlan0: associate with 00:1f:90:cd:53:d0 (try 1/3) [ 11.173175] wlan0: RX AssocResp from 00:1f:90:cd:53:d0 (capab=0x431 status=0 aid=2) [ 11.179722] wlan0: associated [ 11.179743] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 11.179788] cfg80211: Calling CRDA for country: US [ 11.181489] cfg80211: Regulatory domain changed to country: US [ 11.181491] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.181492] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 11.181493] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 11.181494] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.181495] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.181496] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.181496] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 11.181497] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 11.272498] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:1f:90:cd:53:d0 [ 24.473199] wlan0: deauthenticating from 00:1f:90:cd:53:d0 by local choice (reason=3) [ 24.553355] cfg80211: Calling CRDA to update world regulatory domain [ 24.555164] cfg80211: World regulatory domain updated: [ 24.555166] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.555167] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.555168] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.555169] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.555169] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.555170] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.576237] PM: Syncing filesystems ... done. [ 25.581133] PM: Preparing system for mem sleep [ 25.581350] bbswitch: enabling discrete graphics [ 25.633489] pci 0000:01:00.0: power state changed by ACPI to D0 [ 25.633579] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 25.634715] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 25.635806] PM: Entering mem sleep [ 25.635846] Suspending console(s) (use no_console_suspend to debug) [ 25.636038] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [ 25.636041] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 25.636072] sd 5:0:0:0: [sdb] Stopping disk [ 25.636114] sd 2:0:0:0: [sda] Stopping disk [ 25.651013] mei_me 0000:00:16.0: suspend [ 26.788548] PM: suspend of devices complete after 1152.224 msecs [ 26.788676] PM: late suspend of devices complete after 0.126 msecs [ 26.804536] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 26.820471] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 26.852458] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 26.868387] PM: noirq suspend of devices complete after 79.690 msecs [ 26.868675] ACPI: Preparing to enter system sleep state S3 [ 26.868852] PM: Saving platform NVS memory [ 26.869510] Disabling non-boot CPUs ... [ 26.972414] smpboot: CPU 1 is now offline [ 27.076412] smpboot: CPU 2 is now offline [ 27.076816] Broke affinity for irq 23 [ 27.076820] Broke affinity for irq 44 [ 27.180459] smpboot: CPU 3 is now offline [ 27.284489] smpboot: CPU 4 is now offline [ 27.284858] Broke affinity for irq 45 [ 27.388523] smpboot: CPU 5 is now offline [ 27.492542] smpboot: CPU 6 is now offline [ 27.492881] Broke affinity for irq 16 [ 27.596580] smpboot: CPU 7 is now offline [ 27.597956] ACPI: Low-level resume complete [ 27.597992] PM: Restoring platform NVS memory [ 27.598437] Enabling non-boot CPUs ... [ 27.598466] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 27.612947] CPU1 is up [ 27.612962] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 27.627364] CPU2 is up [ 27.627379] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 27.641772] CPU3 is up [ 27.641786] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 27.656191] CPU4 is up [ 27.656205] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 27.670622] CPU5 is up [ 27.670636] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 27.685061] CPU6 is up [ 27.685075] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 27.699532] CPU7 is up [ 27.708476] ACPI: Waking up from system sleep state S3 [ 27.754295] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 27.786275] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 27.818283] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 27.834290] pci 0000:01:00.0: power state changed by ACPI to D0 [ 27.850397] PM: noirq resume of devices complete after 141.368 msecs [ 27.850490] PM: early resume of devices complete after 0.074 msecs [ 27.850509] i915 0000:00:02.0: setting latency timer to 64 [ 27.850520] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 27.850550] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 27.850570] ahci 0000:00:1f.2: setting latency timer to 64 [ 27.850623] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 27.850635] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X [ 27.850693] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 27.850811] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 28.001347] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [ 28.001348] PM: Device 00:07 failed to resume: error -19 [ 28.122488] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 28.203601] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025d0498c0 [ 28.250552] usb 3-7: reset full-speed USB device number 3 using xhci_hcd [ 28.268721] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c240 [ 28.268722] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c280 [ 28.268723] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c2c0 [ 28.268724] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8200 [ 28.268724] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8240 [ 28.514469] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 28.515575] ata6.00: configured for UDMA/133 [ 28.530479] sd 5:0:0:0: [sdb] Starting disk [ 29.863024] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 30.467091] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 30.479652] ata3.00: configured for UDMA/100 [ 30.495088] sd 2:0:0:0: [sda] Starting disk [ 30.525287] PM: resume of devices complete after 2673.971 msecs [ 30.525452] PM: Finishing wakeup. [ 30.525453] Restarting tasks ... done. [ 30.571192] video LNXVIDEO:00: Restoring backlight state [ 30.571195] video LNXVIDEO:01: Restoring backlight state [ 30.571198] bbswitch: disabling discrete graphics [ 30.571204] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 30.590732] pci 0000:01:00.0: power state changed by ACPI to D3cold [ 30.888260] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [28:d2:44:16:47:cb] [ 30.966124] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 30.973721] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0 [ 31.040552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.041471] alx 0000:08:00.0: irq 51 for MSI/MSI-X [ 31.041534] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.042336] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.288096] wlan0: authenticate with 00:1f:90:cd:53:d0 [ 32.290784] wlan0: send auth to 00:1f:90:cd:53:d0 (try 1/3) [ 32.292914] wlan0: authenticated [ 32.292984] iwlwifi 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 32.292987] iwlwifi 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 32.295630] wlan0: associate with 00:1f:90:cd:53:d0 (try 1/3) [ 32.297939] wlan0: RX AssocResp from 00:1f:90:cd:53:d0 (capab=0x431 status=0 aid=2) [ 32.305540] wlan0: associated [ 32.305560] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 32.305605] cfg80211: Calling CRDA for country: US [ 32.307031] cfg80211: Regulatory domain changed to country: US [ 32.307033] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 32.307034] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 32.307035] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 32.307036] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.307037] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.307038] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.307038] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 32.307039] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 32.342323] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:1f:90:cd:53:d0 [ 37.657133] wlan0: deauthenticating from 00:1f:90:cd:53:d0 by local choice (reason=3) [ 37.664637] cfg80211: Calling CRDA to update world regulatory domain [ 37.666827] cfg80211: World regulatory domain updated: [ 37.666829] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 37.666831] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 37.666832] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 37.666833] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 37.666833] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 37.666834] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 38.711174] PM: Syncing filesystems ... done. [ 38.713357] PM: Preparing system for mem sleep [ 38.713475] bbswitch: enabling discrete graphics [ 38.763456] pci 0000:01:00.0: power state changed by ACPI to D0 [ 38.763549] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 38.764740] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 38.765660] PM: Entering mem sleep [ 38.765696] Suspending console(s) (use no_console_suspend to debug) [ 38.765861] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [ 38.765864] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 38.765886] sd 5:0:0:0: [sdb] Stopping disk [ 38.769631] sd 2:0:0:0: [sda] Stopping disk [ 38.784668] mei_me 0000:00:16.0: suspend [ 39.958080] PM: suspend of devices complete after 1191.919 msecs [ 39.958177] PM: late suspend of devices complete after 0.095 msecs [ 39.974192] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 39.990146] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 40.022123] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 40.038047] PM: noirq suspend of devices complete after 79.844 msecs [ 40.038264] ACPI: Preparing to enter system sleep state S3 [ 40.038406] PM: Saving platform NVS memory [ 40.038918] Disabling non-boot CPUs ... [ 40.142072] smpboot: CPU 1 is now offline [ 40.246080] smpboot: CPU 2 is now offline [ 40.350128] smpboot: CPU 3 is now offline [ 40.454158] smpboot: CPU 4 is now offline [ 40.558163] smpboot: CPU 5 is now offline [ 40.662223] smpboot: CPU 6 is now offline [ 40.766277] smpboot: CPU 7 is now offline [ 40.767549] ACPI: Low-level resume complete [ 40.767585] PM: Restoring platform NVS memory [ 40.768045] Enabling non-boot CPUs ... [ 40.768074] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 40.782551] CPU1 is up [ 40.782566] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 40.796974] CPU2 is up [ 40.796988] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 40.811382] CPU3 is up [ 40.811395] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 40.825807] CPU4 is up [ 40.825821] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 40.840238] CPU5 is up [ 40.840251] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 40.854681] CPU6 is up [ 40.854694] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 40.869149] CPU7 is up [ 40.878124] ACPI: Waking up from system sleep state S3 [ 40.923856] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 40.955836] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 40.987844] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 41.003852] pci 0000:01:00.0: power state changed by ACPI to D0 [ 41.019958] PM: noirq resume of devices complete after 141.291 msecs [ 41.020052] PM: early resume of devices complete after 0.075 msecs [ 41.020070] i915 0000:00:02.0: setting latency timer to 64 [ 41.020085] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 41.020104] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 41.020136] ahci 0000:00:1f.2: setting latency timer to 64 [ 41.020165] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X [ 41.020201] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 41.020257] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 41.020342] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 41.169646] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [ 41.169647] PM: Device 00:07 failed to resume: error -19 [ 41.292123] usb 3-7: reset full-speed USB device number 3 using xhci_hcd [ 41.310255] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c240 [ 41.310255] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c280 [ 41.310256] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c2c0 [ 41.310257] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8200 [ 41.310257] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8240 [ 41.476096] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 41.557528] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025d0498c0 [ 41.684057] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 41.685181] ata6.00: configured for UDMA/133 [ 41.700070] sd 5:0:0:0: [sdb] Starting disk [ 42.833115] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 43.692670] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 43.705225] ata3.00: configured for UDMA/100 [ 43.720711] sd 2:0:0:0: [sda] Starting disk [ 43.748450] PM: resume of devices complete after 2727.555 msecs [ 43.748598] PM: Finishing wakeup. [ 43.748599] Restarting tasks ... done. [ 43.800833] video LNXVIDEO:00: Restoring backlight state [ 43.800836] video LNXVIDEO:01: Restoring backlight state [ 43.800839] bbswitch: disabling discrete graphics [ 43.800847] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 43.820369] pci 0000:01:00.0: power state changed by ACPI to D3cold [ 44.065337] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [28:d2:44:16:47:cb] [ 44.142685] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 44.150283] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0 [ 44.208709] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.209806] alx 0000:08:00.0: irq 51 for MSI/MSI-X [ 44.209873] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.210665] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.483592] wlan0: authenticate with 00:1f:90:cd:53:d0 [ 45.486582] wlan0: send auth to 00:1f:90:cd:53:d0 (try 1/3) [ 45.488969] wlan0: authenticated [ 45.489030] iwlwifi 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 45.489032] iwlwifi 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 45.489190] wlan0: associate with 00:1f:90:cd:53:d0 (try 1/3) [ 45.491496] wlan0: RX AssocResp from 00:1f:90:cd:53:d0 (capab=0x431 status=0 aid=2) [ 45.496700] wlan0: associated [ 45.496722] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 45.496768] cfg80211: Calling CRDA for country: US [ 45.498330] cfg80211: Regulatory domain changed to country: US [ 45.498332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 45.498333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 45.498334] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 45.498334] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.498335] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.498336] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.498337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 45.498338] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 45.502952] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:1f:90:cd:53:d0 [ 300.238318] mce: [Hardware Error]: Machine check events logged [ 1455.749056] hda_codec: invalid CONNECT_LIST verb 5[1]:0 [ 1455.749298] hda_codec: invalid CONNECT_LIST verb 6[1]:0 [ 1455.749549] hda_codec: invalid CONNECT_LIST verb 7[1]:0 [ 1604.586994] hda_codec: invalid CONNECT_LIST verb 5[1]:0 [ 1604.587236] hda_codec: invalid CONNECT_LIST verb 6[1]:0 [ 1604.587496] hda_codec: invalid CONNECT_LIST verb 7[1]:0 [ 1750.406739] hda_codec: invalid CONNECT_LIST verb 5[1]:0 [ 1750.406983] hda_codec: invalid CONNECT_LIST verb 6[1]:0 [ 1750.407280] hda_codec: invalid CONNECT_LIST verb 7[1]:0 [ 4626.693240] wlan0: deauthenticating from 00:1f:90:cd:53:d0 by local choice (reason=3) [ 4626.703456] cfg80211: Calling CRDA to update world regulatory domain [ 4626.709775] cfg80211: World regulatory domain updated: [ 4626.709785] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4626.709793] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4626.709800] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4626.709806] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4626.709812] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4626.709819] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4627.801029] PM: Syncing filesystems ... done. [ 4627.805740] PM: Preparing system for mem sleep [ 4627.805946] bbswitch: enabling discrete graphics [ 4627.856006] pci 0000:01:00.0: power state changed by ACPI to D0 [ 4627.856098] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 4627.857255] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4627.858373] PM: Entering mem sleep [ 4627.858412] Suspending console(s) (use no_console_suspend to debug) [ 4627.858581] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [ 4627.858609] sd 5:0:0:0: [sdb] Stopping disk [ 4627.858669] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 4627.858712] sd 2:0:0:0: [sda] Stopping disk [ 4627.874122] mei_me 0000:00:16.0: suspend [ 4629.018783] PM: suspend of devices complete after 1159.339 msecs [ 4629.018900] PM: late suspend of devices complete after 0.115 msecs [ 4629.034907] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 4629.050847] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 4629.082858] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 4629.098793] PM: noirq suspend of devices complete after 79.826 msecs [ 4629.099009] ACPI: Preparing to enter system sleep state S3 [ 4629.099152] PM: Saving platform NVS memory [ 4629.099659] Disabling non-boot CPUs ... [ 4629.202839] smpboot: CPU 1 is now offline [ 4629.203209] Broke affinity for irq 48 [ 4629.306922] smpboot: CPU 2 is now offline [ 4629.411006] smpboot: CPU 3 is now offline [ 4629.515086] smpboot: CPU 4 is now offline [ 4629.619170] smpboot: CPU 5 is now offline [ 4629.723255] smpboot: CPU 6 is now offline [ 4629.723545] Broke affinity for irq 16 [ 4629.723553] Broke affinity for irq 23 [ 4629.723556] Broke affinity for irq 44 [ 4629.827344] smpboot: CPU 7 is now offline [ 4629.828602] ACPI: Low-level resume complete [ 4629.828638] PM: Restoring platform NVS memory [ 4629.829096] Enabling non-boot CPUs ... [ 4629.829127] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 4629.843629] CPU1 is up [ 4629.843644] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 4629.858052] CPU2 is up [ 4629.858068] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 4629.872467] CPU3 is up [ 4629.872482] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 4629.886890] CPU4 is up [ 4629.886904] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 4629.901333] CPU5 is up [ 4629.901347] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 4629.915776] CPU6 is up [ 4629.915791] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 4629.930249] CPU7 is up [ 4629.939232] ACPI: Waking up from system sleep state S3 [ 4629.993047] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 4630.025049] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 4630.057074] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 4630.073088] pci 0000:01:00.0: power state changed by ACPI to D0 [ 4630.089202] PM: noirq resume of devices complete after 143.638 msecs [ 4630.089297] PM: early resume of devices complete after 0.077 msecs [ 4630.089315] i915 0000:00:02.0: setting latency timer to 64 [ 4630.089328] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 4630.089345] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 4630.089385] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X [ 4630.089461] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 4630.089493] ahci 0000:00:1f.2: setting latency timer to 64 [ 4630.089527] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 4630.089565] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 4630.238890] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [ 4630.238891] PM: Device 00:07 failed to resume: error -19 [ 4630.361463] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 4630.442603] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025d0498c0 [ 4630.489573] usb 3-7: reset full-speed USB device number 3 using xhci_hcd [ 4630.507744] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c240 [ 4630.507745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c280 [ 4630.507745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c2c0 [ 4630.507746] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8200 [ 4630.507747] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8240 [ 4630.697559] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4630.698677] ata6.00: configured for UDMA/133 [ 4630.713585] sd 5:0:0:0: [sdb] Starting disk [ 4631.890531] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4632.707181] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4632.719808] ata3.00: configured for UDMA/100 [ 4632.735216] sd 2:0:0:0: [sda] Starting disk [ 4632.763921] PM: resume of devices complete after 2672.464 msecs [ 4632.764080] PM: Finishing wakeup. [ 4632.764081] Restarting tasks ... done. [ 4632.815376] video LNXVIDEO:00: Restoring backlight state [ 4632.815379] video LNXVIDEO:01: Restoring backlight state [ 4632.815382] bbswitch: disabling discrete graphics [ 4632.815388] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 4632.834939] pci 0000:01:00.0: power state changed by ACPI to D3cold [ 4633.083890] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [28:d2:44:16:47:cb] [ 4633.161855] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 4633.169471] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0 [ 4633.233814] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4633.234774] alx 0000:08:00.0: irq 51 for MSI/MSI-X [ 4633.234849] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4633.235701] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4633.298989] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 4633.306623] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0 [ 4633.373165] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4633.375458] alx 0000:08:00.0: irq 51 for MSI/MSI-X [ 4633.375621] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4634.473384] wlan0: authenticate with 00:1f:90:cd:53:d0 [ 4634.476914] wlan0: send auth to 00:1f:90:cd:53:d0 (try 1/3) [ 4634.479435] wlan0: authenticated [ 4634.479595] iwlwifi 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4634.479597] iwlwifi 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4634.480654] wlan0: associate with 00:1f:90:cd:53:d0 (try 1/3) [ 4634.483079] wlan0: RX AssocResp from 00:1f:90:cd:53:d0 (capab=0x431 status=0 aid=2) [ 4634.491232] wlan0: associated [ 4634.491262] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4634.491318] cfg80211: Calling CRDA for country: US [ 4634.492907] cfg80211: Regulatory domain changed to country: US [ 4634.492909] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4634.492910] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4634.492911] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 4634.492912] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4634.492912] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4634.492913] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4634.492914] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4634.492915] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 4634.612563] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:1f:90:cd:53:d0 [ 4653.916356] mce: [Hardware Error]: Machine check events logged [ 4661.403107] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [ 4661.403112] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [ 4893.022463] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [ 4893.022480] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [ 4893.228745] wlan0: deauthenticating from 00:1f:90:cd:53:d0 by local choice (reason=3) [ 4893.245532] cfg80211: Calling CRDA to update world regulatory domain [ 4893.250494] cfg80211: World regulatory domain updated: [ 4893.250501] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4893.250506] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4893.250511] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4893.250514] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4893.250517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4893.250520] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4894.363979] PM: Syncing filesystems ... done. [ 4894.368309] PM: Preparing system for mem sleep [ 4894.368489] bbswitch: enabling discrete graphics [ 4894.418608] pci 0000:01:00.0: power state changed by ACPI to D0 [ 4894.418694] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 4894.419925] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4894.421092] PM: Entering mem sleep [ 4894.421130] Suspending console(s) (use no_console_suspend to debug) [ 4894.421328] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [ 4894.421330] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 4894.421482] sd 5:0:0:0: [sdb] Stopping disk [ 4894.421483] sd 2:0:0:0: [sda] Stopping disk [ 4894.436525] mei_me 0000:00:16.0: suspend [ 4895.539382] PM: suspend of devices complete after 1117.251 msecs [ 4895.539508] PM: late suspend of devices complete after 0.124 msecs [ 4895.555543] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 4895.571502] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 4895.603507] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 4895.619427] PM: noirq suspend of devices complete after 79.853 msecs [ 4895.619644] ACPI: Preparing to enter system sleep state S3 [ 4895.619787] PM: Saving platform NVS memory [ 4895.620293] Disabling non-boot CPUs ... [ 4895.723473] smpboot: CPU 1 is now offline [ 4895.827552] smpboot: CPU 2 is now offline [ 4895.931638] smpboot: CPU 3 is now offline [ 4896.035721] smpboot: CPU 4 is now offline [ 4896.047740] [drm:hsw_unclaimed_reg_clear] *ERROR* Unknown unclaimed register before writing to c7204 [ 4896.047742] [drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to c7204 [ 4896.139803] smpboot: CPU 5 is now offline [ 4896.243888] smpboot: CPU 6 is now offline [ 4896.244189] Broke affinity for irq 16 [ 4896.347973] smpboot: CPU 7 is now offline [ 4896.349242] ACPI: Low-level resume complete [ 4896.349277] PM: Restoring platform NVS memory [ 4896.349769] Enabling non-boot CPUs ... [ 4896.349798] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 4896.364270] CPU1 is up [ 4896.364284] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 4896.378692] CPU2 is up [ 4896.378706] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 4896.393099] CPU3 is up [ 4896.393112] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 4896.407524] CPU4 is up [ 4896.407537] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 4896.421964] CPU5 is up [ 4896.421977] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 4896.436412] CPU6 is up [ 4896.436427] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 4896.450887] CPU7 is up [ 4896.459859] ACPI: Waking up from system sleep state S3 [ 4896.505678] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 4896.537675] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 4896.569699] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 4896.585713] pci 0000:01:00.0: power state changed by ACPI to D0 [ 4896.601828] PM: noirq resume of devices complete after 141.362 msecs [ 4896.601920] PM: early resume of devices complete after 0.074 msecs [ 4896.601938] i915 0000:00:02.0: setting latency timer to 64 [ 4896.601955] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 4896.601987] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 4896.602007] ahci 0000:00:1f.2: setting latency timer to 64 [ 4896.602033] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X [ 4896.602070] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 4896.602169] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 4896.602231] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 4896.752222] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [ 4896.752223] PM: Device 00:07 failed to resume: error -19 [ 4896.874082] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 4896.955350] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025d0498c0 [ 4897.002198] usb 3-7: reset full-speed USB device number 3 using xhci_hcd [ 4897.020372] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c240 [ 4897.020373] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c280 [ 4897.020374] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c2c0 [ 4897.020374] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8200 [ 4897.020375] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8240 [ 4897.258208] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4897.259313] ata6.00: configured for UDMA/133 [ 4897.274236] sd 5:0:0:0: [sdb] Starting disk [ 4898.106905] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4899.227834] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4899.240487] ata3.00: configured for UDMA/100 [ 4899.255894] sd 2:0:0:0: [sda] Starting disk [ 4899.281674] PM: resume of devices complete after 2677.588 msecs [ 4899.281854] PM: Finishing wakeup. [ 4899.281855] Restarting tasks ... done. [ 4899.327985] video LNXVIDEO:00: Restoring backlight state [ 4899.327988] video LNXVIDEO:01: Restoring backlight state [ 4899.327992] bbswitch: disabling discrete graphics [ 4899.327998] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 4899.347579] pci 0000:01:00.0: power state changed by ACPI to D3cold [ 4899.645867] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [28:d2:44:16:47:cb] [ 4899.733929] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 4899.741563] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0 [ 4899.806980] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4899.808531] alx 0000:08:00.0: irq 51 for MSI/MSI-X [ 4899.808631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4899.809573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4901.088229] wlan0: authenticate with 00:1f:90:cd:53:d0 [ 4901.091268] wlan0: send auth to 00:1f:90:cd:53:d0 (try 1/3) [ 4901.093545] wlan0: authenticated [ 4901.093615] iwlwifi 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 4901.093618] iwlwifi 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 4901.097323] wlan0: associate with 00:1f:90:cd:53:d0 (try 1/3) [ 4901.099621] wlan0: RX AssocResp from 00:1f:90:cd:53:d0 (capab=0x431 status=0 aid=2) [ 4901.108791] wlan0: associated [ 4901.108809] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:1f:90:cd:53:d0 [ 4901.108816] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4901.108866] cfg80211: Calling CRDA for country: US [ 4901.110433] cfg80211: Regulatory domain changed to country: US [ 4901.110434] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4901.110436] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4901.110437] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 4901.110437] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4901.110438] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4901.110439] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4901.110440] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4901.110441] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 5104.281380] mce: [Hardware Error]: Machine check events logged [ 9909.921061] hda-intel 0000:00:1b.0: Unstable LPIB (65532 >= 32768); disabling LPIB delay counting [ 9963.088066] wlan0: deauthenticating from 00:1f:90:cd:53:d0 by local choice (reason=3) [ 9963.097845] cfg80211: Calling CRDA to update world regulatory domain [ 9963.099493] cfg80211: World regulatory domain updated: [ 9963.099495] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9963.099496] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9963.099497] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9963.099498] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9963.099499] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9963.099500] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9964.392505] PM: Syncing filesystems ... done. [ 9964.397807] PM: Preparing system for mem sleep [ 9964.398066] bbswitch: enabling discrete graphics [ 9964.448699] pci 0000:01:00.0: power state changed by ACPI to D0 [ 9964.448788] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9964.449987] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9964.451094] PM: Entering mem sleep [ 9964.451138] Suspending console(s) (use no_console_suspend to debug) [ 9964.451353] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [ 9964.451479] sd 5:0:0:0: [sdb] Stopping disk [ 9964.451564] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 9964.451641] sd 2:0:0:0: [sda] Stopping disk [ 9964.466945] mei_me 0000:00:16.0: suspend [ 9965.661257] PM: suspend of devices complete after 1209.045 msecs [ 9965.661353] PM: late suspend of devices complete after 0.094 msecs [ 9965.677372] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 9965.693317] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 9965.725337] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 9965.741270] PM: noirq suspend of devices complete after 79.851 msecs [ 9965.741627] ACPI: Preparing to enter system sleep state S3 [ 9965.741769] PM: Saving platform NVS memory [ 9965.742278] Disabling non-boot CPUs ... [ 9965.845327] smpboot: CPU 1 is now offline [ 9965.949399] smpboot: CPU 2 is now offline [ 9966.053489] smpboot: CPU 3 is now offline [ 9966.157565] smpboot: CPU 4 is now offline [ 9966.261650] smpboot: CPU 5 is now offline [ 9966.365733] smpboot: CPU 6 is now offline [ 9966.469820] smpboot: CPU 7 is now offline [ 9966.471073] ACPI: Low-level resume complete [ 9966.471107] PM: Restoring platform NVS memory [ 9966.471578] Enabling non-boot CPUs ... [ 9966.471607] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 9966.486088] CPU1 is up [ 9966.486103] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 9966.500503] CPU2 is up [ 9966.500517] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 9966.514907] CPU3 is up [ 9966.514921] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 9966.529328] CPU4 is up [ 9966.529342] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 9966.543755] CPU5 is up [ 9966.543768] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 9966.558191] CPU6 is up [ 9966.558205] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 9966.572657] CPU7 is up [ 9966.581590] ACPI: Waking up from system sleep state S3 [ 9966.627530] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 9966.659528] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 9966.691553] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 9966.707567] pci 0000:01:00.0: power state changed by ACPI to D0 [ 9966.723682] PM: noirq resume of devices complete after 141.364 msecs [ 9966.723774] PM: early resume of devices complete after 0.075 msecs [ 9966.723795] i915 0000:00:02.0: setting latency timer to 64 [ 9966.723810] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 9966.723820] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 9966.723871] ahci 0000:00:1f.2: setting latency timer to 64 [ 9966.723878] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X [ 9966.723923] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 9966.723971] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9966.724013] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9966.873393] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [ 9966.873394] PM: Device 00:07 failed to resume: error -19 [ 9966.995949] usb 3-7: reset full-speed USB device number 3 using xhci_hcd [ 9967.014130] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c240 [ 9967.014131] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c280 [ 9967.014131] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025e55c2c0 [ 9967.014132] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8200 [ 9967.014133] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802635b8240 [ 9967.180081] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 9967.261668] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025d0498c0 [ 9967.388084] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9967.389202] ata6.00: configured for UDMA/133 [ 9967.408105] sd 5:0:0:0: [sdb] Starting disk [ 9968.176731] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 9969.341644] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9969.354210] ata3.00: configured for UDMA/100 [ 9969.369703] sd 2:0:0:0: [sda] Starting disk [ 9969.400468] PM: resume of devices complete after 2674.530 msecs [ 9969.400632] PM: Finishing wakeup. [ 9969.400633] Restarting tasks ... done. [ 9969.445830] video LNXVIDEO:00: Restoring backlight state [ 9969.445833] video LNXVIDEO:01: Restoring backlight state [ 9969.445838] bbswitch: disabling discrete graphics [ 9969.445845] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 9969.465566] pci 0000:01:00.0: power state changed by ACPI to D3cold [ 9969.748782] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [28:d2:44:16:47:cb] [ 9969.828501] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 9969.836122] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0 [ 9969.899674] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9969.900805] alx 0000:08:00.0: irq 51 for MSI/MSI-X [ 9969.900884] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9969.901138] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9969.953570] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 9969.961197] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0 [ 9970.029169] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9970.030395] alx 0000:08:00.0: irq 51 for MSI/MSI-X [ 9970.030475] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9971.162170] wlan0: authenticate with 00:1f:90:cd:53:d0 [ 9971.166354] wlan0: send auth to 00:1f:90:cd:53:d0 (try 1/3) [ 9971.168885] wlan0: authenticated [ 9971.169113] iwlwifi 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 9971.169121] iwlwifi 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 9971.171177] wlan0: associate with 00:1f:90:cd:53:d0 (try 1/3) [ 9971.175450] wlan0: RX AssocResp from 00:1f:90:cd:53:d0 (capab=0x431 status=0 aid=2) [ 9971.183170] wlan0: associated [ 9971.183252] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 9971.183424] cfg80211: Calling CRDA for country: US [ 9971.188403] cfg80211: Regulatory domain changed to country: US [ 9971.188411] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9971.188416] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 9971.188420] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 9971.188423] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9971.188444] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9971.188447] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9971.188451] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 9971.188454] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 9971.276450] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:1f:90:cd:53:d0 [10058.242796] mce: [Hardware Error]: Machine check events logged [13035.579344] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [13035.579360] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root