[ 49.116239] wlan0: send auth to 54:75:d0:e3:ab:35 (try 1/3) [ 49.118261] wlan0: authenticated [ 49.120408] wlan0: associate with 54:75:d0:e3:ab:35 (try 1/3) [ 49.124380] wlan0: RX AssocResp from 54:75:d0:e3:ab:35 (capab=0x411 status=0 aid=3) [ 49.124505] wlan0: associated [ 49.124996] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 99.292884] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 101.994652] hidraw: raw HID events driver (C) Jiri Kosina [ 102.116000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 102.116012] Bluetooth: HIDP socket layer initialized [ 252.731745] perf samples too long (5022 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [ 861.964406] wlan0: deauthenticating from 54:75:d0:e3:ab:35 by local choice (reason=3) [ 861.984699] cfg80211: Calling CRDA to update world regulatory domain [ 862.017787] cfg80211: World regulatory domain updated: [ 862.017798] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 862.017805] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 862.017812] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 862.017818] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 862.017825] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 862.017832] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 889.795303] PM: Syncing filesystems ... done. [ 889.956771] PM: Preparing system for mem sleep [ 889.956994] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 889.959000] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 889.960331] PM: Entering mem sleep [ 889.960386] Suspending console(s) (use no_console_suspend to debug) [ 889.960781] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 889.969990] sd 0:0:0:0: [sda] Stopping disk [ 890.512233] PM: suspend of devices complete after 551.626 msecs [ 890.512569] PM: late suspend of devices complete after 0.318 msecs [ 890.512906] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 890.560365] PM: noirq suspend of devices complete after 47.787 msecs [ 890.560407] ACPI: Preparing to enter system sleep state S3 [ 890.644289] PM: Saving platform NVS memory [ 890.645259] Disabling non-boot CPUs ... [ 890.748035] smpboot: CPU 1 is now offline [ 890.748572] ACPI: Low-level resume complete [ 890.748572] PM: Restoring platform NVS memory [ 890.748572] Enabling non-boot CPUs ... [ 890.748572] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 890.647025] Initializing CPU#1 [ 890.647025] Disabled fast string operations [ 890.760846] CPU1 is up [ 890.761386] ACPI: Waking up from system sleep state S3 [ 891.692262] PM: noirq resume of devices complete after 96.052 msecs [ 891.692499] PM: early resume of devices complete after 0.190 msecs [ 891.692791] i915 0000:00:02.0: setting latency timer to 64 [ 891.696412] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 891.696772] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 891.696810] usb usb2: root hub lost power or was reset [ 891.697017] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 891.697051] usb usb3: root hub lost power or was reset [ 891.697255] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 891.697289] usb usb4: root hub lost power or was reset [ 891.697492] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 891.697525] usb usb5: root hub lost power or was reset [ 891.697749] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 891.697793] pci 0000:00:1e.0: setting latency timer to 64 [ 891.697819] ahci 0000:00:1f.2: setting latency timer to 64 [ 891.698898] ath: phy0: ASPM enabled: 0x42 [ 891.698927] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 892.020076] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 892.021568] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 892.032100] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 892.032467] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 892.033057] ata1.00: configured for UDMA/133 [ 892.048318] sd 0:0:0:0: [sda] Starting disk [ 892.852191] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 893.053479] PM: resume of devices complete after 1360.966 msecs [ 893.053922] PM: Finishing wakeup. [ 893.053926] Restarting tasks ... done. [ 893.200453] video LNXVIDEO:00: Restoring backlight state [ 923.025714] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 923.034258] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [ 923.054223] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 925.300016] wlan0: authenticate with 54:75:d0:e3:ab:35 [ 925.324884] wlan0: send auth to 54:75:d0:e3:ab:35 (try 1/3) [ 925.326940] wlan0: authenticated [ 925.332091] wlan0: associate with 54:75:d0:e3:ab:35 (try 1/3) [ 925.335750] wlan0: RX AssocResp from 54:75:d0:e3:ab:35 (capab=0x411 status=0 aid=3) [ 925.335872] wlan0: associated [ 925.335947] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6079.529695] eeepc_laptop: Unknown key 51 pressed [ 6631.502404] wlan0: deauthenticating from 54:75:d0:e3:ab:35 by local choice (reason=3) [ 6631.527889] cfg80211: Calling CRDA to update world regulatory domain [ 6631.625245] cfg80211: World regulatory domain updated: [ 6631.625261] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6631.625275] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6631.625288] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6631.625301] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6631.625313] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6631.625327] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6660.244204] PM: Syncing filesystems ... done. [ 6660.502836] PM: Preparing system for mem sleep [ 6660.503062] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6660.505169] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6660.506819] PM: Entering mem sleep [ 6660.506868] Suspending console(s) (use no_console_suspend to debug) [ 6660.507385] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6660.508250] sd 0:0:0:0: [sda] Stopping disk [ 6661.052244] PM: suspend of devices complete after 545.065 msecs [ 6661.052580] PM: late suspend of devices complete after 0.380 msecs [ 6661.052908] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 6661.102945] PM: noirq suspend of devices complete after 50.341 msecs [ 6661.102989] ACPI: Preparing to enter system sleep state S3 [ 6661.196287] PM: Saving platform NVS memory [ 6661.197269] Disabling non-boot CPUs ... [ 6661.300037] smpboot: CPU 1 is now offline [ 6661.300529] ACPI: Low-level resume complete [ 6661.300529] PM: Restoring platform NVS memory [ 6661.300529] Enabling non-boot CPUs ... [ 6661.300529] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6661.198877] Initializing CPU#1 [ 6661.198877] Disabled fast string operations [ 6661.312772] CPU1 is up [ 6661.313305] ACPI: Waking up from system sleep state S3 [ 6662.244260] PM: noirq resume of devices complete after 96.043 msecs [ 6662.244495] PM: early resume of devices complete after 0.187 msecs [ 6662.244790] i915 0000:00:02.0: setting latency timer to 64 [ 6662.248422] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6662.248795] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6662.248833] usb usb2: root hub lost power or was reset [ 6662.249041] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6662.249076] usb usb3: root hub lost power or was reset [ 6662.249282] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6662.249316] usb usb4: root hub lost power or was reset [ 6662.249522] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 6662.249556] usb usb5: root hub lost power or was reset [ 6662.249784] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 6662.249828] pci 0000:00:1e.0: setting latency timer to 64 [ 6662.249855] ahci 0000:00:1f.2: setting latency timer to 64 [ 6662.250934] ath: phy0: ASPM enabled: 0x42 [ 6662.250963] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 6662.572155] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6662.573602] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6662.584131] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 6662.587035] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6662.587577] ata1.00: configured for UDMA/133 [ 6662.600261] sd 0:0:0:0: [sda] Starting disk [ 6662.832147] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 6663.554205] PM: resume of devices complete after 1309.696 msecs [ 6663.554644] PM: Finishing wakeup. [ 6663.554648] Restarting tasks ... done. [ 6663.668843] video LNXVIDEO:00: Restoring backlight state [ 6722.503048] PM: Syncing filesystems ... done. [ 6722.665800] PM: Preparing system for mem sleep [ 6722.666062] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6722.668277] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6722.669995] PM: Entering mem sleep [ 6722.670052] Suspending console(s) (use no_console_suspend to debug) [ 6722.670574] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6722.674415] sd 0:0:0:0: [sda] Stopping disk [ 6723.220168] PM: suspend of devices complete after 549.795 msecs [ 6723.220492] PM: late suspend of devices complete after 0.370 msecs [ 6723.220760] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 6723.270718] PM: noirq suspend of devices complete after 50.205 msecs [ 6723.270767] ACPI: Preparing to enter system sleep state S3 [ 6723.356285] PM: Saving platform NVS memory [ 6723.357285] Disabling non-boot CPUs ... [ 6723.460036] smpboot: CPU 1 is now offline [ 6723.460508] ACPI: Low-level resume complete [ 6723.460508] PM: Restoring platform NVS memory [ 6723.460508] Enabling non-boot CPUs ... [ 6723.460508] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6723.358875] Initializing CPU#1 [ 6723.358875] Disabled fast string operations [ 6723.472778] CPU1 is up [ 6723.473318] ACPI: Waking up from system sleep state S3 [ 6724.404263] PM: noirq resume of devices complete after 95.765 msecs [ 6724.404499] PM: early resume of devices complete after 0.189 msecs [ 6724.404886] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6724.404923] usb usb2: root hub lost power or was reset [ 6724.404976] pci 0000:00:1e.0: setting latency timer to 64 [ 6724.405001] ahci 0000:00:1f.2: setting latency timer to 64 [ 6724.405019] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6724.405057] usb usb3: root hub lost power or was reset [ 6724.405335] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6724.405365] usb usb4: root hub lost power or was reset [ 6724.405543] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 6724.405574] usb usb5: root hub lost power or was reset [ 6724.405789] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 6724.405938] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 6724.406162] ath: phy0: ASPM enabled: 0x42 [ 6724.406339] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6724.406420] i915 0000:00:02.0: setting latency timer to 64 [ 6724.724154] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6724.740147] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 6724.783163] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6724.800784] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6724.801362] ata1.00: configured for UDMA/133 [ 6724.816337] sd 0:0:0:0: [sda] Starting disk [ 6724.988582] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 6725.710209] PM: resume of devices complete after 1305.696 msecs [ 6725.710728] PM: Finishing wakeup. [ 6725.710734] Restarting tasks ... done. [ 6725.763092] video LNXVIDEO:00: Restoring backlight state [ 6785.062116] PM: Syncing filesystems ... done. [ 6785.233232] PM: Preparing system for mem sleep [ 6785.233465] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6785.235580] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6785.237186] PM: Entering mem sleep [ 6785.237244] Suspending console(s) (use no_console_suspend to debug) [ 6785.237752] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6785.238665] sd 0:0:0:0: [sda] Stopping disk [ 6785.788265] PM: suspend of devices complete after 550.704 msecs [ 6785.788603] PM: late suspend of devices complete after 0.383 msecs [ 6785.788931] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 6785.838726] PM: noirq suspend of devices complete after 50.107 msecs [ 6785.838769] ACPI: Preparing to enter system sleep state S3 [ 6785.924287] PM: Saving platform NVS memory [ 6785.925298] Disabling non-boot CPUs ... [ 6786.028054] smpboot: CPU 1 is now offline [ 6786.028567] ACPI: Low-level resume complete [ 6786.028567] PM: Restoring platform NVS memory [ 6786.028567] Enabling non-boot CPUs ... [ 6786.028567] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6785.926898] Initializing CPU#1 [ 6785.926898] Disabled fast string operations [ 6786.040832] CPU1 is up [ 6786.041364] ACPI: Waking up from system sleep state S3 [ 6786.976264] PM: noirq resume of devices complete after 96.049 msecs [ 6786.976501] PM: early resume of devices complete after 0.190 msecs [ 6786.976784] i915 0000:00:02.0: setting latency timer to 64 [ 6786.980426] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6786.980793] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6786.980832] usb usb2: root hub lost power or was reset [ 6786.981038] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6786.981072] usb usb3: root hub lost power or was reset [ 6786.981271] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6786.981305] usb usb4: root hub lost power or was reset [ 6786.981506] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 6786.981540] usb usb5: root hub lost power or was reset [ 6786.981762] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 6786.981807] pci 0000:00:1e.0: setting latency timer to 64 [ 6786.981834] ahci 0000:00:1f.2: setting latency timer to 64 [ 6786.982912] ath: phy0: ASPM enabled: 0x42 [ 6786.982941] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 6787.300159] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6787.301607] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6787.316093] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 6787.317504] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6787.318058] ata1.00: configured for UDMA/133 [ 6787.332495] sd 0:0:0:0: [sda] Starting disk [ 6787.564169] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 6788.286773] PM: resume of devices complete after 1310.258 msecs [ 6788.287206] PM: Finishing wakeup. [ 6788.287210] Restarting tasks ... done. [ 6788.377724] video LNXVIDEO:00: Restoring backlight state [ 6790.058311] PM: Syncing filesystems ... done. [ 6790.279105] PM: Preparing system for mem sleep [ 6790.279338] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6790.281524] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6790.283086] PM: Entering mem sleep [ 6790.283137] Suspending console(s) (use no_console_suspend to debug) [ 6790.283547] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6790.284455] sd 0:0:0:0: [sda] Stopping disk [ 6790.832250] PM: suspend of devices complete after 548.880 msecs [ 6790.832576] PM: late suspend of devices complete after 0.316 msecs [ 6790.832856] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 6790.880360] PM: noirq suspend of devices complete after 47.776 msecs [ 6790.880409] ACPI: Preparing to enter system sleep state S3 [ 6790.893542] PM: Saving platform NVS memory [ 6790.894553] Disabling non-boot CPUs ... [ 6790.896273] smpboot: CPU 1 is now offline [ 6790.896722] ACPI: Low-level resume complete [ 6790.896722] PM: Restoring platform NVS memory [ 6790.896722] Enabling non-boot CPUs ... [ 6790.896722] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6790.896148] Initializing CPU#1 [ 6790.896148] Disabled fast string operations [ 6790.908942] CPU1 is up [ 6790.909473] ACPI: Waking up from system sleep state S3 [ 6791.840263] PM: noirq resume of devices complete after 96.046 msecs [ 6791.840498] PM: early resume of devices complete after 0.187 msecs [ 6791.840788] i915 0000:00:02.0: setting latency timer to 64 [ 6791.844434] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6791.844808] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6791.844846] usb usb2: root hub lost power or was reset [ 6791.845055] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6791.845090] usb usb3: root hub lost power or was reset [ 6791.845293] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6791.845327] usb usb4: root hub lost power or was reset [ 6791.845532] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 6791.845566] usb usb5: root hub lost power or was reset [ 6791.845791] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 6791.845835] pci 0000:00:1e.0: setting latency timer to 64 [ 6791.845862] ahci 0000:00:1f.2: setting latency timer to 64 [ 6791.846940] ath: phy0: ASPM enabled: 0x42 [ 6791.846966] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 6792.164202] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6792.165656] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6792.179634] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6792.180087] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 6792.180164] ata1.00: configured for UDMA/133 [ 6792.196208] sd 0:0:0:0: [sda] Starting disk [ 6792.428208] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 6793.151812] PM: resume of devices complete after 1311.302 msecs [ 6793.152334] PM: Finishing wakeup. [ 6793.152338] Restarting tasks ... done. [ 6793.292067] video LNXVIDEO:00: Restoring backlight state [ 6794.154014] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6794.176667] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [ 6794.196563] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6797.472815] wlan0: authenticate with 54:75:d0:e3:ab:35 [ 6797.497601] wlan0: send auth to 54:75:d0:e3:ab:35 (try 1/3) [ 6797.503947] wlan0: authenticated [ 6797.509459] wlan0: associate with 54:75:d0:e3:ab:35 (try 1/3) [ 6797.513184] wlan0: RX AssocResp from 54:75:d0:e3:ab:35 (capab=0x411 status=0 aid=3) [ 6797.513354] wlan0: associated [ 6797.513463] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6800.939910] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 6820.320214] nfs: server chambre not responding, still trying [ 6823.805833] nfs: server chambre OK [ 7009.187150] show_signal_msg: 159 callbacks suppressed [ 7009.187168] wpa_supplicant[1117]: segfault at 37 ip 08102980 sp bfe089e0 error 4 in wpa_supplicant[8048000+166000] [ 7013.861039] wlan0: deauthenticating from 54:75:d0:e3:ab:35 by local choice (reason=2) [ 7013.877661] cfg80211: Calling CRDA to update world regulatory domain [ 7013.911547] cfg80211: World regulatory domain updated: [ 7013.911565] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7013.911580] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7013.911594] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7013.911607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7013.911620] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7013.911634] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7015.010293] wlan0: authenticate with 54:75:d0:e3:ab:35 [ 7015.059722] wlan0: send auth to 54:75:d0:e3:ab:35 (try 1/3) [ 7015.063566] wlan0: authenticated [ 7015.072139] wlan0: associate with 54:75:d0:e3:ab:35 (try 1/3) [ 7015.075859] wlan0: RX AssocResp from 54:75:d0:e3:ab:35 (capab=0x411 status=0 aid=3) [ 7015.076020] wlan0: associated [ 7134.563721] perf samples too long (10024 > 10000), lowering kernel.perf_event_max_sample_rate to 12500 [ 8164.440877] wlan0: deauthenticating from 54:75:d0:e3:ab:35 by local choice (reason=3) [ 8164.472450] cfg80211: Calling CRDA to update world regulatory domain [ 8164.608019] cfg80211: World regulatory domain updated: [ 8164.608019] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8164.608019] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8164.608129] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8164.608144] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8164.608156] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8164.608168] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8191.507414] PM: Syncing filesystems ... done. [ 8191.679468] PM: Preparing system for mem sleep [ 8191.679699] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8191.681619] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8191.683081] PM: Entering mem sleep [ 8191.683132] Suspending console(s) (use no_console_suspend to debug) [ 8191.683526] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8191.684363] sd 0:0:0:0: [sda] Stopping disk [ 8192.228252] PM: suspend of devices complete after 544.894 msecs [ 8192.228583] PM: late suspend of devices complete after 0.313 msecs [ 8192.228919] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 8192.276365] PM: noirq suspend of devices complete after 47.775 msecs [ 8192.276409] ACPI: Preparing to enter system sleep state S3 [ 8192.360288] PM: Saving platform NVS memory [ 8192.361258] Disabling non-boot CPUs ... [ 8192.464035] smpboot: CPU 1 is now offline [ 8192.464549] ACPI: Low-level resume complete [ 8192.464549] PM: Restoring platform NVS memory [ 8192.464549] Enabling non-boot CPUs ... [ 8192.464549] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 8192.362915] Initializing CPU#1 [ 8192.362915] Disabled fast string operations [ 8192.476815] CPU1 is up [ 8192.477344] ACPI: Waking up from system sleep state S3 [ 8193.408262] PM: noirq resume of devices complete after 96.046 msecs [ 8193.408499] PM: early resume of devices complete after 0.189 msecs [ 8193.408784] i915 0000:00:02.0: setting latency timer to 64 [ 8193.412504] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 8193.412888] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8193.412927] usb usb2: root hub lost power or was reset [ 8193.413136] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8193.413170] usb usb3: root hub lost power or was reset [ 8193.413376] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8193.413410] usb usb4: root hub lost power or was reset [ 8193.413616] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8193.413668] usb usb5: root hub lost power or was reset [ 8193.413880] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 8193.413923] pci 0000:00:1e.0: setting latency timer to 64 [ 8193.413949] ahci 0000:00:1f.2: setting latency timer to 64 [ 8193.415029] ath: phy0: ASPM enabled: 0x42 [ 8193.415057] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 8193.736076] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8193.737549] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8193.743697] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8193.744196] ata1.00: configured for UDMA/133 [ 8193.748067] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 8193.760200] sd 0:0:0:0: [sda] Starting disk [ 8193.996153] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 8194.719475] PM: resume of devices complete after 1310.962 msecs [ 8194.719930] PM: Finishing wakeup. [ 8194.719935] Restarting tasks ... done. [ 8194.796138] video LNXVIDEO:00: Restoring backlight state [ 8252.105666] eeepc_laptop: Unknown key 50 pressed [ 8253.195244] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 8312.863658] PM: Syncing filesystems ... done. [ 8313.046541] PM: Preparing system for mem sleep [ 8313.046766] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8313.048344] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8313.049962] PM: Entering mem sleep [ 8313.050012] Suspending console(s) (use no_console_suspend to debug) [ 8313.050477] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8313.050630] sd 0:0:0:0: [sda] Stopping disk [ 8313.596145] PM: suspend of devices complete after 545.911 msecs [ 8313.596464] PM: late suspend of devices complete after 0.304 msecs [ 8313.596741] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 8313.644359] PM: noirq suspend of devices complete after 47.887 msecs [ 8313.644408] ACPI: Preparing to enter system sleep state S3 [ 8313.724291] PM: Saving platform NVS memory [ 8313.725322] Disabling non-boot CPUs ... [ 8313.828037] smpboot: CPU 1 is now offline [ 8313.828566] ACPI: Low-level resume complete [ 8313.828566] PM: Restoring platform NVS memory [ 8313.828566] Enabling non-boot CPUs ... [ 8313.828566] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 8313.726983] Initializing CPU#1 [ 8313.726983] Disabled fast string operations [ 8313.840850] CPU1 is up [ 8313.841387] ACPI: Waking up from system sleep state S3 [ 8314.772259] PM: noirq resume of devices complete after 96.046 msecs [ 8314.772498] PM: early resume of devices complete after 0.190 msecs [ 8314.772808] i915 0000:00:02.0: setting latency timer to 64 [ 8314.772969] pci 0000:00:1e.0: setting latency timer to 64 [ 8314.772996] ahci 0000:00:1f.2: setting latency timer to 64 [ 8314.774070] ath: phy0: ASPM enabled: 0x42 [ 8314.774100] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 8314.776510] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 8314.777085] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8314.777125] usb usb2: root hub lost power or was reset [ 8314.777347] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8314.777381] usb usb3: root hub lost power or was reset [ 8314.777702] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8314.777760] usb usb4: root hub lost power or was reset [ 8314.777971] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8314.778005] usb usb5: root hub lost power or was reset [ 8314.778216] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 8315.096174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8315.112175] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 8315.151901] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8315.170532] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8315.171026] ata1.00: configured for UDMA/133 [ 8315.184211] sd 0:0:0:0: [sda] Starting disk [ 8315.360223] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 8316.083752] PM: resume of devices complete after 1311.242 msecs [ 8316.084244] PM: Finishing wakeup. [ 8316.084248] Restarting tasks ... done. [ 8316.203172] video LNXVIDEO:00: Restoring backlight state [ 8377.076913] PM: Syncing filesystems ... done. [ 8377.163082] PM: Preparing system for mem sleep [ 8377.163300] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8377.165191] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8377.166812] PM: Entering mem sleep [ 8377.166863] Suspending console(s) (use no_console_suspend to debug) [ 8377.167295] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8377.167448] sd 0:0:0:0: [sda] Stopping disk [ 8377.716227] PM: suspend of devices complete after 549.142 msecs [ 8377.716566] PM: late suspend of devices complete after 0.321 msecs [ 8377.716903] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 8377.764363] PM: noirq suspend of devices complete after 47.788 msecs [ 8377.764405] ACPI: Preparing to enter system sleep state S3 [ 8377.844293] PM: Saving platform NVS memory [ 8377.845321] Disabling non-boot CPUs ... [ 8377.948036] smpboot: CPU 1 is now offline [ 8377.948532] ACPI: Low-level resume complete [ 8377.948532] PM: Restoring platform NVS memory [ 8377.948532] Enabling non-boot CPUs ... [ 8377.948532] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 8377.846974] Initializing CPU#1 [ 8377.846974] Disabled fast string operations [ 8377.960826] CPU1 is up [ 8377.961360] ACPI: Waking up from system sleep state S3 [ 8378.904265] PM: noirq resume of devices complete after 95.911 msecs [ 8378.904500] PM: early resume of devices complete after 0.187 msecs [ 8378.904783] i915 0000:00:02.0: setting latency timer to 64 [ 8378.908424] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 8378.908777] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8378.908816] usb usb2: root hub lost power or was reset [ 8378.909020] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8378.909054] usb usb3: root hub lost power or was reset [ 8378.909253] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8378.909287] usb usb4: root hub lost power or was reset [ 8378.909486] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8378.909520] usb usb5: root hub lost power or was reset [ 8378.909742] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 8378.909788] pci 0000:00:1e.0: setting latency timer to 64 [ 8378.909814] ahci 0000:00:1f.2: setting latency timer to 64 [ 8378.910892] ath: phy0: ASPM enabled: 0x42 [ 8378.910917] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 8379.228164] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8379.229633] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8379.243110] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8379.243637] ata1.00: configured for UDMA/133 [ 8379.244075] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 8379.256205] sd 0:0:0:0: [sda] Starting disk [ 8379.492172] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 8380.213836] PM: resume of devices complete after 1309.322 msecs [ 8380.214521] PM: Finishing wakeup. [ 8380.214527] Restarting tasks ... done. [ 8380.332112] video LNXVIDEO:00: Restoring backlight state [ 8391.648143] nfs: server chambre not responding, still trying [ 8411.988116] eeepc_laptop: Unknown key 51 pressed [ 8433.575733] PM: Syncing filesystems ... done. [ 8433.792456] PM: Preparing system for mem sleep [ 8433.792679] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 8433.794825] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8433.796370] PM: Entering mem sleep [ 8433.796424] Suspending console(s) (use no_console_suspend to debug) [ 8433.796824] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8433.808665] sd 0:0:0:0: [sda] Stopping disk [ 8434.388148] PM: suspend of devices complete after 591.501 msecs [ 8434.388471] PM: late suspend of devices complete after 0.308 msecs [ 8434.388750] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 8434.436358] PM: noirq suspend of devices complete after 47.879 msecs [ 8434.436408] ACPI: Preparing to enter system sleep state S3 [ 8434.516291] PM: Saving platform NVS memory [ 8434.517328] Disabling non-boot CPUs ... [ 8434.620036] smpboot: CPU 1 is now offline [ 8434.620534] ACPI: Low-level resume complete [ 8434.620534] PM: Restoring platform NVS memory [ 8434.620534] Enabling non-boot CPUs ... [ 8434.620534] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 8434.518990] Initializing CPU#1 [ 8434.518990] Disabled fast string operations [ 8434.632830] CPU1 is up [ 8434.633384] ACPI: Waking up from system sleep state S3 [ 8435.564266] PM: noirq resume of devices complete after 96.052 msecs [ 8435.564506] PM: early resume of devices complete after 0.192 msecs [ 8435.564797] i915 0000:00:02.0: setting latency timer to 64 [ 8435.568424] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 8435.568781] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8435.568820] usb usb2: root hub lost power or was reset [ 8435.569023] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8435.569057] usb usb3: root hub lost power or was reset [ 8435.569257] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8435.569291] usb usb4: root hub lost power or was reset [ 8435.569490] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8435.569523] usb usb5: root hub lost power or was reset [ 8435.569745] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 8435.569789] pci 0000:00:1e.0: setting latency timer to 64 [ 8435.569815] ahci 0000:00:1f.2: setting latency timer to 64 [ 8435.570895] ath: phy0: ASPM enabled: 0x42 [ 8435.570921] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 8435.888226] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8435.889674] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8435.897345] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8435.897884] ata1.00: configured for UDMA/133 [ 8435.904213] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 8435.912206] sd 0:0:0:0: [sda] Starting disk [ 8436.152084] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 8436.873793] PM: resume of devices complete after 1309.275 msecs [ 8436.874223] PM: Finishing wakeup. [ 8436.874227] Restarting tasks ... done. [ 8436.994338] video LNXVIDEO:00: Restoring backlight state [ 8438.354806] PM: Syncing filesystems ... done. [ 8438.526439] PM: Preparing system for mem sleep [ 8438.526658] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8438.528327] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8438.529962] PM: Entering mem sleep [ 8438.530017] Suspending console(s) (use no_console_suspend to debug) [ 8438.530428] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8438.530687] sd 0:0:0:0: [sda] Stopping disk [ 8439.084218] PM: suspend of devices complete after 553.969 msecs [ 8439.084543] PM: late suspend of devices complete after 0.315 msecs [ 8439.084824] pcieport 0000:00:1c.3: System wakeup enabled by ACPI [ 8439.132362] PM: noirq suspend of devices complete after 47.811 msecs [ 8439.132413] ACPI: Preparing to enter system sleep state S3 [ 8439.145930] PM: Saving platform NVS memory [ 8439.146986] Disabling non-boot CPUs ... [ 8439.148766] smpboot: CPU 1 is now offline [ 8439.149234] ACPI: Low-level resume complete [ 8439.149234] PM: Restoring platform NVS memory [ 8439.149234] Enabling non-boot CPUs ... [ 8439.149234] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 8439.148644] Initializing CPU#1 [ 8439.148644] Disabled fast string operations [ 8439.161479] CPU1 is up [ 8439.162010] ACPI: Waking up from system sleep state S3 [ 8440.092262] PM: noirq resume of devices complete after 96.044 msecs [ 8440.092500] PM: early resume of devices complete after 0.190 msecs [ 8440.092789] i915 0000:00:02.0: setting latency timer to 64 [ 8440.096467] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 8440.096831] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8440.096870] usb usb2: root hub lost power or was reset [ 8440.097078] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8440.097112] usb usb3: root hub lost power or was reset [ 8440.097317] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8440.097351] usb usb4: root hub lost power or was reset [ 8440.097557] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8440.097591] usb usb5: root hub lost power or was reset [ 8440.097894] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 8440.097938] pci 0000:00:1e.0: setting latency timer to 64 [ 8440.097966] ahci 0000:00:1f.2: setting latency timer to 64 [ 8440.099044] ath: phy0: ASPM enabled: 0x42 [ 8440.099073] pcieport 0000:00:1c.3: System wakeup disabled by ACPI [ 8440.416109] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8440.417549] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8440.432131] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 8440.432773] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8440.433340] ata1.00: configured for UDMA/133 [ 8440.448199] sd 0:0:0:0: [sda] Starting disk [ 8440.680858] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 8441.406415] PM: resume of devices complete after 1313.902 msecs [ 8441.406874] PM: Finishing wakeup. [ 8441.406879] Restarting tasks ... done. [ 8441.532707] video LNXVIDEO:00: Restoring backlight state [ 8442.127491] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8442.140523] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [ 8442.157895] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8444.856822] wlan0: authenticate with 54:75:d0:e3:ab:35 [ 8444.882488] wlan0: send auth to 54:75:d0:e3:ab:35 (try 1/3) [ 8444.884813] wlan0: authenticated [ 8444.888673] wlan0: associate with 54:75:d0:e3:ab:35 (try 1/3) [ 8444.893169] wlan0: RX AssocResp from 54:75:d0:e3:ab:35 (capab=0x411 status=0 aid=3) [ 8444.893298] wlan0: associated [ 8444.893364] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 8451.686955] nfs: server chambre OK [ 8465.827869] eeepc_laptop: Unknown key 50 pressed [ 8466.961027] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.