[ 0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable [ 44.147326] init: avahi-cups-reload main process (1360) terminated with status 1 [ 44.245695] ppdev: user-space parallel port driver [ 44.854996] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.858001] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 45.253400] r8169 0000:09:00.0 eth0: link down [ 45.253423] r8169 0000:09:00.0 eth0: link down [ 45.253455] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.253703] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.967470] vboxdrv: Found 8 processor cores. [ 45.967607] vboxdrv: fAsync=0 offMin=0xea offMax=0xead [ 45.967669] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 45.967671] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004). [ 45.987455] vboxpci: IOMMU not found (not registered) [ 46.859374] r8169 0000:09:00.0 eth0: link up [ 46.859382] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [21557.577381] PM: Syncing filesystems ... done. [21557.822580] Freezing user space processes ... (elapsed 0.01 seconds) done. [21557.838301] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [21557.854334] Suspending console(s) (use no_console_suspend to debug) [21557.854887] sd 0:0:0:0: [sda] Synchronizing SCSI cache [21557.855018] sd 0:0:0:0: [sda] Stopping disk [21558.613471] PM: suspend of devices complete after 759.859 msecs [21558.613605] PM: late suspend of devices complete after 0.132 msecs [21558.613806] r8169 0000:09:00.0: System wakeup enabled by ACPI [21558.645442] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [21558.661419] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [21558.693199] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [21558.709213] PM: noirq suspend of devices complete after 95.710 msecs [21558.709746] ACPI: Preparing to enter system sleep state S3 [21558.761103] PM: Saving platform NVS memory [21558.763802] Disabling non-boot CPUs ... [21558.765069] smpboot: CPU 1 is now offline [21558.868952] smpboot: CPU 2 is now offline [21558.869412] Broke affinity for irq 16 [21558.972838] smpboot: CPU 3 is now offline [21559.076722] smpboot: CPU 4 is now offline [21559.180614] smpboot: CPU 5 is now offline [21559.284490] smpboot: CPU 6 is now offline [21559.284940] Broke affinity for irq 41 [21559.284941] Broke affinity for irq 43 [21559.285945] smpboot: CPU 7 is now offline [21559.292363] ACPI: Low-level resume complete [21559.292403] PM: Restoring platform NVS memory [21559.292847] Enabling non-boot CPUs ... [21559.292904] smpboot: Booting Node 0 Processor 1 APIC 0x1 [21559.306714] CPU1 is up [21559.306771] smpboot: Booting Node 0 Processor 2 APIC 0x2 [21559.320592] CPU2 is up [21559.320652] smpboot: Booting Node 0 Processor 3 APIC 0x3 [21559.334451] CPU3 is up [21559.334497] smpboot: Booting Node 0 Processor 4 APIC 0x4 [21559.348302] CPU4 is up [21559.348349] smpboot: Booting Node 0 Processor 5 APIC 0x5 [21559.362174] CPU5 is up [21559.362227] smpboot: Booting Node 0 Processor 6 APIC 0x6 [21559.376055] CPU6 is up [21559.376108] smpboot: Booting Node 0 Processor 7 APIC 0x7 [21559.389918] CPU7 is up [21559.397346] ACPI: Waking up from system sleep state S3 [21559.502966] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [21559.534929] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [21559.566894] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [21559.662878] PM: noirq resume of devices complete after 176.005 msecs [21559.663009] PM: early resume of devices complete after 0.088 msecs [21559.663042] xhci_hcd 0000:00:14.0: setting latency timer to 64 [21559.663050] ehci-pci 0000:00:1a.0: setting latency timer to 64 [21559.663092] ehci-pci 0000:00:1d.0: setting latency timer to 64 [21559.663136] mei 0000:00:16.0: irq 46 for MSI/MSI-X [21559.663146] ahci 0000:00:1f.2: setting latency timer to 64 [21559.663159] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [21559.663213] ath: phy0: ASPM enabled: 0x42 [21559.663216] r8169 0000:09:00.0: System wakeup disabled by ACPI [21559.663384] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [21559.666511] [drm] probing gen 2 caps for device 8086:151 = 3/e [21559.666513] [drm] PCIE gen 2 link speeds already enabled [21559.668682] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [21559.668776] radeon 0000:01:00.0: WB enabled [21559.668778] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023bbe7c00 [21559.668779] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023bbe7c0c [21559.684907] [drm] ring test on 0 succeeded in 1 usecs [21559.684964] [drm] ring test on 3 succeeded in 1 usecs [21559.685008] [drm] ib test on ring 0 succeeded in 0 usecs [21559.685057] [drm] ib test on ring 3 succeeded in 1 usecs [21559.878734] usb 3-2: reset high-speed USB device number 2 using xhci_hcd [21559.990434] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21559.994236] ata5.00: configured for UDMA/133 [21560.074530] usb 3-4: reset full-speed USB device number 3 using xhci_hcd [21560.090729] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023cf3d700 [21560.090739] usb 3-4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [21560.110238] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023ce844c0 [21560.119969] snd-usb-audio 3-2:1.2: no reset_resume for driver snd-usb-audio? [21560.119972] snd-usb-audio 3-2:1.3: no reset_resume for driver snd-usb-audio? [21560.370263] usb 3-4.4: reset full-speed USB device number 4 using xhci_hcd [21560.386299] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023ce84c00 [21560.386317] usb 3-4.4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [21560.853746] usb 3-4.4.2: reset low-speed USB device number 6 using xhci_hcd [21560.872559] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023d16c700 [21560.872562] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023d16c540 [21560.872571] usb 3-4.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [21560.872584] usb 3-4.4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [21560.941635] usb 3-4.4.4: reset full-speed USB device number 7 using xhci_hcd [21561.996157] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [21563.020470] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023ce848c0 [21563.020479] usb 3-4.4.4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [21564.052174] usb 3-4.4.1: reset low-speed USB device number 5 using xhci_hcd [21565.084136] ata1.00: configured for UDMA/133 [21565.085446] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023ce84340 [21565.085454] usb 3-4.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [21565.096964] sd 0:0:0:0: [sda] Starting disk [21565.189187] PM: resume of devices complete after 5532.244 msecs [21569.714613] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. [21569.714613] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1Restarting tasks ... done. [21569.736450] video LNXVIDEO:00: Restoring backlight state [21569.743863] usb 1-1.2: USB disconnect, device number 5 [21569.943525] usb 1-1.2: new full-speed USB device number 6 using ehci-pci [21570.037584] usb 1-1.2: New USB device found, idVendor=0489, idProduct=e036 [21570.037591] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21570.037594] usb 1-1.2: Product: Bluetooth USB Host Controller [21570.037597] usb 1-1.2: Manufacturer: Atheros Communications [21570.037600] usb 1-1.2: SerialNumber: Alaska Day 2006 [21570.365135] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [21570.472915] r8169 0000:09:00.0 eth0: link down [21570.472930] r8169 0000:09:00.0 eth0: link down [21570.472989] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [21570.692564] mmc0: SD Status: Invalid Allocation Unit size. [21571.509748] mmc0: error -110 whilst initialising SD card [21572.119627] r8169 0000:09:00.0 eth0: link up [21572.119645] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [21574.818804] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20121018/evregion-501) [21574.818832] ACPI Error: Method parse/execution failed [\_SB_.BAT1.UPBS] (Node ffff88024305deb0), AE_TIME (20121018/psparse-537) [21574.818851] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node ffff88024305de88), AE_TIME (20121018/psparse-537) [21574.818871] i8042: Can't write CTR while closing AUX port [21574.821163] ACPI Exception: AE_TIME, Evaluating _BST (20121018/battery-492) [21575.334438] i8042: Can't reactivate AUX port [21576.058968] mmc0: SD Status: Invalid Allocation Unit size. [21576.110447] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 1999, fw id: 1106483 [21576.143291] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16 [21576.456292] mmc0: error -110 whilst initialising SD card [21576.932860] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 1999, fw id: 1106483 [21576.966467] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input17 [21577.509162] mmc0: SD Status: Invalid Allocation Unit size. [21577.906685] mmc0: error -110 whilst initialising SD card [26609.990056] show_signal_msg: 21 callbacks suppressed [26609.990064] Chrome_IOThread[2542]: segfault at 0 ip 00007f4733ffa4d4 sp 00007f471b31a030 error 4 in chromium-browser[7f47336fc000+53e1000] [33499.527791] usb 3-4.4.4.1: new full-speed USB device number 8 using xhci_hcd [33499.544065] usb 3-4.4.4.1: not running at top speed; connect to a high speed hub [33499.544812] usb 3-4.4.4.1: New USB device found, idVendor=0421, idProduct=0156 [33499.544818] usb 3-4.4.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33499.544822] usb 3-4.4.4.1: Product: Nokia 5800 XpressMusic [33499.544826] usb 3-4.4.4.1: Manufacturer: Nokia [33499.544828] usb 3-4.4.4.1: SerialNumber: 358279034921039 [33499.612407] Initializing USB Mass Storage driver... [33499.612543] scsi6 : usb-storage 3-4.4.4.1:1.0 [33499.612688] usbcore: registered new interface driver usb-storage [33499.612691] USB Mass Storage support registered. [33500.611346] scsi 6:0:0:0: Direct-Access Nokia S60 1.0 PQ: 0 ANSI: 0 [33500.612710] sd 6:0:0:0: Attached scsi generic sg2 type 0 [33500.613625] sd 6:0:0:0: [sdb] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [33500.614051] sd 6:0:0:0: [sdb] Write Protect is off [33500.614060] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [33500.615295] sd 6:0:0:0: [sdb] No Caching mode page present [33500.615301] sd 6:0:0:0: [sdb] Assuming drive cache: write through [33500.618455] sd 6:0:0:0: [sdb] No Caching mode page present [33500.618464] sd 6:0:0:0: [sdb] Assuming drive cache: write through [33500.624430] sdb: sdb1 [33500.626596] sd 6:0:0:0: [sdb] No Caching mode page present [33500.626603] sd 6:0:0:0: [sdb] Assuming drive cache: write through [33500.626608] sd 6:0:0:0: [sdb] Attached SCSI removable disk [33868.080350] usb 3-4.4.4.1: USB disconnect, device number 8 [33873.385026] usb 3-4.4.4.1: new full-speed USB device number 9 using xhci_hcd [33873.405935] usb 3-4.4.4.1: not running at top speed; connect to a high speed hub [33873.417994] usb 3-4.4.4.1: New USB device found, idVendor=18d1, idProduct=4e41 [33873.418001] usb 3-4.4.4.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [33873.418005] usb 3-4.4.4.1: Product: Nexus 7 [33873.418008] usb 3-4.4.4.1: Manufacturer: asus [33873.418011] usb 3-4.4.4.1: SerialNumber: 015d456d8560100f [33873.418264] usb 3-4.4.4.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 48 microframes [34007.117422] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.117495] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34007.186189] usb 3-4.4.4.1: reset full-speed USB device number 9 using xhci_hcd [34007.208905] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f0840 [34007.208913] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f0880 [34007.208917] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f08c0 [34007.208938] usb 3-4.4.4.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 48 microframes [34007.210589] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34007.210638] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210668] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210687] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210697] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210706] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210715] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210725] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210734] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210742] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210751] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210759] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210768] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210776] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210785] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210793] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210803] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210813] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210823] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210831] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210841] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210849] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210858] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210866] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210874] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210883] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210891] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210899] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210909] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210917] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210926] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210934] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210944] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210952] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210961] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210970] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210978] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210987] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.210995] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211003] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211011] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211020] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211028] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211037] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211046] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211055] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211063] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211071] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211081] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211090] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211099] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211108] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211116] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211124] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211132] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211141] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211149] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211158] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211166] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211175] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211184] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211193] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211202] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211211] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211219] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211227] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211235] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211244] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211269] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211285] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211298] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211313] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211336] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34007.211350] usb 3-4.4.4.1: usbfs: process 9948 (kio_mtp) did not claim interface 0 before use [34009.208811] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34009.208916] usb 3-4.4.4.1: usbfs: process 9954 (kio_mtp) did not claim interface 0 before use [34009.279909] usb 3-4.4.4.1: reset full-speed USB device number 9 using xhci_hcd [34009.302799] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f0840 [34009.302806] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f0880 [34009.302810] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f08c0 [34009.302833] usb 3-4.4.4.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 48 microframes [34009.304399] usb 3-4.4.4.1: usbfs: process 9954 (kio_mtp) did not claim interface 0 before use [34009.304446] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34009.304476] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34009.304498] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34009.304510] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34009.304522] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34009.304598] usb 3-4.4.4.1: usbfs: process 9951 (kio_mtp) did not claim interface 0 before use [34014.763302] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.763440] usb 3-4.4.4.1: usbfs: process 9966 (kio_mtp) did not claim interface 0 before use [34014.833741] usb 3-4.4.4.1: reset full-speed USB device number 9 using xhci_hcd [34014.856616] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f0840 [34014.856624] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f0880 [34014.856627] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f08c0 [34014.856650] usb 3-4.4.4.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 48 microframes [34014.858252] usb 3-4.4.4.1: usbfs: process 9966 (kio_mtp) did not claim interface 0 before use [34014.858295] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858317] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858334] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858343] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858352] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858362] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858370] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858379] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858388] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858397] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858406] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858415] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858424] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858432] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858441] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858450] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858459] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858469] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858478] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858486] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858494] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858503] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858511] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858519] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858528] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858536] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858545] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858554] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858562] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858570] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858579] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858587] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858595] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858604] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858612] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34014.858691] usb 3-4.4.4.1: usbfs: process 9956 (kio_mtp) did not claim interface 0 before use [34079.359459] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.359520] usb 3-4.4.4.1: usbfs: process 10050 (kio_mtp) did not claim interface 0 before use [34079.430851] usb 3-4.4.4.1: reset full-speed USB device number 9 using xhci_hcd [34079.453552] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f0840 [34079.453559] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f0880 [34079.453563] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802410f08c0 [34079.453588] usb 3-4.4.4.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 48 microframes [34079.455112] usb 3-4.4.4.1: usbfs: process 10050 (kio_mtp) did not claim interface 0 before use [34079.455203] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455221] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455233] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455243] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455253] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455264] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455275] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455284] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455294] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455304] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455314] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455325] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455334] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455344] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455354] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455364] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455374] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455383] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455393] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455403] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455413] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455423] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455432] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455442] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455452] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455462] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455472] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455483] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455493] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455503] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455513] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455523] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455534] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455545] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455555] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455565] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455575] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455584] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455594] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455603] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455614] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455624] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455634] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455644] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455654] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455663] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455673] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455683] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455693] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455702] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455712] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455722] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455732] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455742] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455752] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455762] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455772] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455782] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455792] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455801] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455811] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455821] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455832] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455842] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455852] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455863] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455885] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455900] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455915] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455928] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455951] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.455965] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34079.456074] usb 3-4.4.4.1: usbfs: process 10010 (kio_mtp) did not claim interface 0 before use [34205.371548] usb 3-4.4.4.1: USB disconnect, device number 9 [51130.621337] PM: Syncing filesystems ... done. [51130.859472] Freezing user space processes ... (elapsed 0.01 seconds) done. [51130.875155] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [51130.891187] Suspending console(s) (use no_console_suspend to debug) [51130.891949] sd 0:0:0:0: [sda] Synchronizing SCSI cache [51130.892056] sd 0:0:0:0: [sda] Stopping disk [51131.642333] PM: suspend of devices complete after 751.865 msecs [51131.642473] PM: late suspend of devices complete after 0.137 msecs [51131.642678] r8169 0000:09:00.0: System wakeup enabled by ACPI [51131.674323] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [51131.690310] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [51131.722064] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [51131.738076] PM: noirq suspend of devices complete after 95.705 msecs [51131.738613] ACPI: Preparing to enter system sleep state S3 [51131.789964] PM: Saving platform NVS memory [51131.792663] Disabling non-boot CPUs ... [51131.793924] smpboot: CPU 1 is now offline [51131.897814] smpboot: CPU 2 is now offline [51131.898280] Broke affinity for irq 16 [51132.001699] smpboot: CPU 3 is now offline [51132.003231] smpboot: CPU 4 is now offline [51132.003682] Broke affinity for irq 23 [51132.105584] smpboot: CPU 5 is now offline [51132.209469] smpboot: CPU 6 is now offline [51132.209939] Broke affinity for irq 41 [51132.209940] Broke affinity for irq 43 [51132.210943] smpboot: CPU 7 is now offline [51132.212330] ACPI: Low-level resume complete [51132.212377] PM: Restoring platform NVS memory [51132.212838] Enabling non-boot CPUs ... [51132.218040] smpboot: Booting Node 0 Processor 1 APIC 0x1 [51132.231867] CPU1 is up [51132.231919] smpboot: Booting Node 0 Processor 2 APIC 0x2 [51132.245719] CPU2 is up [51132.245775] smpboot: Booting Node 0 Processor 3 APIC 0x3 [51132.259535] CPU3 is up [51132.259587] smpboot: Booting Node 0 Processor 4 APIC 0x4 [51132.273397] CPU4 is up [51132.273443] smpboot: Booting Node 0 Processor 5 APIC 0x5 [51132.287263] CPU5 is up [51132.287313] smpboot: Booting Node 0 Processor 6 APIC 0x6 [51132.301189] CPU6 is up [51132.301263] smpboot: Booting Node 0 Processor 7 APIC 0x7 [51132.315119] CPU7 is up [51132.322532] ACPI: Waking up from system sleep state S3 [51132.450812] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [51132.482774] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [51132.514736] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [51132.610730] PM: noirq resume of devices complete after 176.006 msecs [51132.610857] PM: early resume of devices complete after 0.103 msecs [51132.610905] xhci_hcd 0000:00:14.0: setting latency timer to 64 [51132.610923] ehci-pci 0000:00:1a.0: setting latency timer to 64 [51132.610949] ahci 0000:00:1f.2: setting latency timer to 64 [51132.610953] ehci-pci 0000:00:1d.0: setting latency timer to 64 [51132.611073] ath: phy0: ASPM enabled: 0x42 [51132.611085] r8169 0000:09:00.0: System wakeup disabled by ACPI [51132.611124] mei 0000:00:16.0: irq 46 for MSI/MSI-X [51132.611192] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [51132.611340] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [51132.614198] [drm] probing gen 2 caps for device 8086:151 = 3/e [51132.614200] [drm] PCIE gen 2 link speeds already enabled [51132.616453] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [51132.616546] radeon 0000:01:00.0: WB enabled [51132.616548] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023bbe7c00 [51132.616549] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023bbe7c0c [51132.632669] [drm] ring test on 0 succeeded in 1 usecs [51132.632726] [drm] ring test on 3 succeeded in 1 usecs [51132.632774] [drm] ib test on ring 0 succeeded in 0 usecs [51132.632832] [drm] ib test on ring 3 succeeded in 1 usecs [51132.826582] usb 3-4: reset full-speed USB device number 3 using xhci_hcd [51132.842759] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023cf3d700 [51132.842766] usb 3-4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [51132.938304] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [51132.942092] ata5.00: configured for UDMA/133 [51132.954506] usb 3-2: reset high-speed USB device number 2 using xhci_hcd [51133.185787] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023ce844c0 [51133.195257] snd-usb-audio 3-2:1.2: no reset_resume for driver snd-usb-audio? [51133.195261] snd-usb-audio 3-2:1.3: no reset_resume for driver snd-usb-audio? [51135.007936] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [51138.032082] ata1.00: configured for UDMA/133 [51138.044816] sd 0:0:0:0: [sda] Starting disk [51138.065518] PM: resume of devices complete after 5460.650 msecs [51142.666037] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. [51142.666622] usb 3-4.4.1: USB disconnect, device number 5 [51142.666037] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1Restarting tasks ... done. [51142.677241] video LNXVIDEO:00: Restoring backlight state [51142.720013] usb 3-4.4.2: USB disconnect, device number 6 [51142.795465] usb 3-4.4.4: USB disconnect, device number 7 [51142.827617] usb 1-1.2: USB disconnect, device number 6 [51143.027269] usb 1-1.2: new full-speed USB device number 7 using ehci-pci [51143.121113] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [51143.123999] usb 1-1.2: New USB device found, idVendor=0489, idProduct=e036 [51143.124002] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [51143.124004] usb 1-1.2: Product: Bluetooth USB Host Controller [51143.124006] usb 1-1.2: Manufacturer: Atheros Communications [51143.124008] usb 1-1.2: SerialNumber: Alaska Day 2006 [51143.125006] usb 3-4.4: USB disconnect, device number 4 [51143.248977] r8169 0000:09:00.0 eth0: link down [51143.249047] r8169 0000:09:00.0 eth0: link down [51143.249057] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [51143.632260] mmc0: SD Status: Invalid Allocation Unit size. [51144.030020] mmc0: error -110 whilst initialising SD card [51144.908923] r8169 0000:09:00.0 eth0: link up [51144.908930] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [51147.760239] i8042: Can't write CTR while closing AUX port [51148.274166] i8042: Can't reactivate AUX port [51149.036766] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 1999, fw id: 1106483 [51149.076247] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input18 [51149.230158] mmc0: SD Status: Invalid Allocation Unit size. [51149.627947] mmc0: error -110 whilst initialising SD card [51149.891185] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 1999, fw id: 1106483 [51149.925140] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input19 [51151.683850] usb 3-4: USB disconnect, device number 3 [51151.953413] usb 3-4: new full-speed USB device number 10 using xhci_hcd [51151.970252] usb 3-4: New USB device found, idVendor=058f, idProduct=9254 [51151.970259] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [51151.970263] usb 3-4: Product: Generic USB Hub [51151.970265] usb 3-4: Manufacturer: ALCOR [51151.970472] usb 3-4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [51151.970655] hub 3-4:1.0: USB hub found [51151.970757] hub 3-4:1.0: 4 ports detected [51152.241179] usb 3-4.4: new full-speed USB device number 11 using xhci_hcd [51152.257461] usb 3-4.4: not running at top speed; connect to a high speed hub [51152.257772] usb 3-4.4: New USB device found, idVendor=1a40, idProduct=0101 [51152.257776] usb 3-4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [51152.257779] usb 3-4.4: Product: USB 2.0 Hub [51152.257992] usb 3-4.4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [51152.258205] hub 3-4.4:1.0: USB hub found [51152.258305] hub 3-4.4:1.0: 4 ports detected [51152.528815] usb 3-4.4.1: new low-speed USB device number 12 using xhci_hcd [51152.549021] usb 3-4.4.1: New USB device found, idVendor=046d, idProduct=c05a [51152.549028] usb 3-4.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [51152.549032] usb 3-4.4.1: Product: USB Optical Mouse [51152.549035] usb 3-4.4.1: Manufacturer: Logitech [51152.549275] usb 3-4.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [51152.551503] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4.1/3-4.4.1:1.0/input/input20 [51152.551825] hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4.4.1/input0 [51152.620752] usb 3-4.4.2: new low-speed USB device number 13 using xhci_hcd [51152.642874] usb 3-4.4.2: New USB device found, idVendor=0603, idProduct=00f2 [51152.642881] usb 3-4.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [51152.642884] usb 3-4.4.2: Product: USB Keyboard [51152.642887] usb 3-4.4.2: Manufacturer: NOVATEK [51152.643133] usb 3-4.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [51152.643141] usb 3-4.4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [51152.646313] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4.2/3-4.4.2:1.0/input/input21 [51152.646598] hid-generic 0003:0603:00F2.0005: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-4.4.2/input0 [51152.651851] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4.2/3-4.4.2:1.1/input/input22 [51152.652157] hid-generic 0003:0603:00F2.0006: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-4.4.2/input1 [51152.720659] usb 3-4.4.4: new full-speed USB device number 14 using xhci_hcd [51152.736726] usb 3-4.4.4: not running at top speed; connect to a high speed hub [51152.737063] usb 3-4.4.4: New USB device found, idVendor=1a40, idProduct=0101 [51152.737070] usb 3-4.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [51152.737076] usb 3-4.4.4: Product: USB 2.0 Hub [51152.737304] usb 3-4.4.4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [51152.737510] hub 3-4.4.4:1.0: USB hub found [51152.737605] hub 3-4.4.4:1.0: 4 ports detected [60095.674431] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [60095.697111] usb 4-1: New USB device found, idVendor=18a5, idProduct=0408 [60095.697119] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [60095.697123] usb 4-1: Product: Portable USB 3.0 Hard Drive [60095.697127] usb 4-1: Manufacturer: Verbatim [60095.697130] usb 4-1: SerialNumber: 217133010CDC [60095.698453] scsi7 : usb-storage 4-1:1.0 [60101.197745] scsi 7:0:0:0: Direct-Access ST1000LM 024 HN-M101M 2AR1 PQ: 0 ANSI: 2 [60101.199437] sd 7:0:0:0: Attached scsi generic sg2 type 0 [60101.202902] sd 7:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB) [60101.203349] sd 7:0:0:0: [sdb] Write Protect is off [60101.203355] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 [60101.203800] sd 7:0:0:0: [sdb] No Caching mode page present [60101.203806] sd 7:0:0:0: [sdb] Assuming drive cache: write through [60101.208517] sd 7:0:0:0: [sdb] No Caching mode page present [60101.208524] sd 7:0:0:0: [sdb] Assuming drive cache: write through [60101.217616] sdb: sdb1 sdb2 sdb3 sdb4 [60102.236808] sd 7:0:0:0: [sdb] No Caching mode page present [60102.236813] sd 7:0:0:0: [sdb] Assuming drive cache: write through [60102.236815] sd 7:0:0:0: [sdb] Attached SCSI disk [60109.498757] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [74254.441445] Chrome_IOThread[1540]: segfault at 0 ip 00007f525a8d34d4 sp 00007f5241bf3030 error 4 in chromium-browser[7f5259fd5000+53e1000] [87693.949198] mmc0: SD Status: Invalid Allocation Unit size. [87694.349948] mmc0: error -110 whilst initialising SD card [87695.403055] mmc0: SD Status: Invalid Allocation Unit size. [87695.800285] mmc0: error -110 whilst initialising SD card [87696.853715] mmc0: SD Status: Invalid Allocation Unit size. [87697.254714] mmc0: error -110 whilst initialising SD card