TCP hangs for most sites
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
Ubuntu |
New
|
Undecided
|
Unassigned |
Bug Description
Strange...
I have a dual boot machine with WinXP and Ubuntu 2.6.17-generic.
WinXP works fine with internet.
Ubuntu has problems with web-browsers/
The sites it does connect to are: www.google.co.il and some other ubuntu forumes site in .nl
aMule works fine...
ping/tracerout work OK for ALL sites
I used wireShark to sniff around and it seems that that all sites are resolved and contacted. they even transfer the first packets, but then something hangs ( maybe my system does not ACK something...)
wireShark also says that there might be a checksum overloading error (??) in some of my tranmissions...
HELP...
yoni
ifconfig
---------------
eth0 Link encap:Ethernet HWaddr 00:14:85:DC:2D:F2
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::214:
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2426 errors:0 dropped:0 overruns:0 frame:0
TX packets:2884 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:1882702 (1.7 MiB) TX bytes:520469 (508.2 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:98 errors:0 dropped:0 overruns:0 frame:0
TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:8130 (7.9 KiB) TX bytes:8130 (7.9 KiB)
-------
sysctl.conf
-------
kernel.printk = 4 4 1 7
net.ipv4.
net.ipv4.
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
-------
dmesg
-------
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5200
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 P4M80P ) @ 0x000f6b60
[17179569.184000] ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
[17179569.184000] ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff30c0
[17179569.184000] ACPI: MADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6700
[17179569.184000] ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2667.600 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.772000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.772000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.800000] Memory: 1026940k/1048512k available (1911k kernel code, 20900k reserved, 1073k data, 308k init, 131008k highmem)
[17179569.800000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.880000] Calibrating delay using timer specific routine.. 5341.56 BogoMIPS (lpj=10683124)
[17179569.880000] Security Framework v1.0.0 initialized
[17179569.880000] SELinux: Disabled at boot.
[17179569.880000] Mount-cache hash table entries: 512
[17179569.880000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[17179569.880000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[17179569.880000] monitor/mwait feature present.
[17179569.880000] using mwait in idle threads.
[17179569.880000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179569.880000] CPU: L2 cache: 1024K
[17179569.880000] CPU: Hyper-Threading is disabled
[17179569.880000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
[17179569.880000] Checking 'hlt' instruction... OK.
[17179569.896000] SMP alternatives: switching to UP code
[17179569.896000] checking if image is initramfs... it is
[17179570.624000] Freeing initrd memory: 8090k freed
[17179570.624000] ACPI: Core revision 20060707
[17179570.628000] ACPI: Looking for DSDT ... not found!
[17179570.632000] CPU0: Intel(R) Pentium(R) D CPU 2.66GHz stepping 07
[17179570.632000] SMP alternatives: switching to SMP code
[17179570.632000] Booting processor 1/1 eip 3000
[17179570.644000] Initializing CPU#1
[17179570.724000] Calibrating delay using timer specific routine.. 5333.94 BogoMIPS (lpj=10667887)
[17179570.724000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[17179570.724000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[17179570.724000] monitor/mwait feature present.
[17179570.724000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179570.724000] CPU: L2 cache: 1024K
[17179570.724000] CPU: Hyper-Threading is disabled
[17179570.724000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
[17179570.724000] CPU1: Intel(R) Pentium(R) D CPU 2.66GHz stepping 07
[17179570.724000] Total of 2 processors activated (10675.50 BogoMIPS).
[17179570.724000] ENABLING IO-APIC IRQs
[17179570.724000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.868000] checking TSC synchronization across 2 CPUs: passed.
[17179570.872000] Brought up 2 CPUs
[17179570.924000] migration_cost=4000
[17179570.928000] NET: Registered protocol family 16
[17179570.928000] EISA bus registered
[17179570.928000] ACPI: bus type pci registered
[17179570.932000] PCI: PCI BIOS revision 2.10 entry at 0xfb080, last bus=1
[17179570.932000] PCI: Using configuration type 1
[17179570.932000] Setting up standard PCI resources
[17179570.936000] mtrr: your CPUs had inconsistent fixed MTRR settings
[17179570.936000] mtrr: probably your BIOS does not setup all CPUs.
[17179570.936000] mtrr: corrected configuration.
[17179570.944000] ACPI: Interpreter enabled
[17179570.944000] ACPI: Using IOAPIC for interrupt routing
[17179570.944000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.944000] PCI: Probing PCI hardware (bus 00)
[17179570.948000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179570.948000] PCI: Quirk-MSI-K8T Soundcard On
[17179570.948000] PCI: Unexpected Value in PCI-Register: no Change!
[17179570.948000] Boot video device is 0000:01:00.0
[17179570.948000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.984000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[17179570.984000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[17179570.984000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[17179570.984000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.984000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.984000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.984000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.984000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.988000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[17179570.988000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[17179570.988000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[17179570.988000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[17179570.988000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.988000] pnp: PnP ACPI init
[17179570.992000] pnp: PnP ACPI: found 13 devices
[17179570.992000] PnPBIOS: Disabled by ACPI PNP
[17179570.992000] PCI: Using ACPI for IRQ routing
[17179570.992000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.008000] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
[17179571.008000] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[17179571.008000] PCI: Bridge: 0000:00:01.0
[17179571.008000] IO window: a000-afff
[17179571.008000] MEM window: e8000000-e9ffffff
[17179571.008000] PREFETCH window: d8000000-e7ffffff
[17179571.008000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.008000] NET: Registered protocol family 2
[17179571.048000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.048000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179571.048000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179571.048000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.048000] TCP reno registered
[17179571.048000] audit: initializing netlink socket (disabled)
[17179571.048000] audit(118229406
[17179571.048000] highmem bounce pool size: 64 pages
[17179571.048000] VFS: Disk quotas dquot_6.5.1
[17179571.048000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.048000] Initializing Cryptographic API
[17179571.048000] io scheduler noop registered
[17179571.048000] io scheduler anticipatory registered
[17179571.048000] io scheduler deadline registered
[17179571.048000] io scheduler cfq registered (default)
[17179571.048000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179571.052000] isapnp: Scanning for PnP cards...
[17179571.400000] isapnp: No Plug & Play device found
[17179571.432000] Real Time Clock Driver v1.12ac
[17179571.432000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.432000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.432000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.432000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.432000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.432000] mice: PS/2 mouse device common for all mice
[17179571.432000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.432000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.432000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.432000] PNP: PS/2 Controller [PNP0303:
[17179571.452000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.452000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.456000] EISA: Probing bus 0 at eisa.0
[17179571.456000] Cannot allocate resource for EISA slot 4
[17179571.456000] EISA: Detected 0 cards.
[17179571.456000] TCP bic registered
[17179571.456000] NET: Registered protocol family 1
[17179571.456000] NET: Registered protocol family 8
[17179571.456000] NET: Registered protocol family 20
[17179571.456000] Starting balanced_irq
[17179571.456000] Using IPI No-Shortcut mode
[17179571.456000] ACPI: (supports S0 S1 S4 S5)
[17179571.456000] Freeing unused kernel memory: 308k freed
[17179571.476000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.672000] Capability LSM initialized
[17179572.688000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: <email address hidden>
[17179572.724000] ACPI Exception (acpi_processor
[17179572.724000] ACPI: Getting cpuindex for acpiid 0x2
[17179572.724000] ACPI Exception (acpi_processor
[17179572.724000] ACPI: Getting cpuindex for acpiid 0x3
[17179572.788000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179572.788000] md: bitmap version 4.39
[17179572.788000] md: linear personality registered for level -1
[17179572.792000] md: multipath personality registered for level -4
[17179572.796000] md: raid0 personality registered for level 0
[17179572.804000] md: raid1 personality registered for level 1
[17179572.812000] raid5: automatically using best checksumming function: pIII_sse
[17179572.832000] pIII_sse : 4291.000 MB/sec
[17179572.832000] raid5: using function: pIII_sse (4291.000 MB/sec)
[17179572.832000] md: raid5 personality registered for level 5
[17179572.832000] md: raid4 personality registered for level 4
[17179572.904000] raid6: int32x1 637 MB/s
[17179572.972000] raid6: int32x2 761 MB/s
[17179573.040000] raid6: int32x4 628 MB/s
[17179573.108000] raid6: int32x8 494 MB/s
[17179573.176000] raid6: mmxx1 1600 MB/s
[17179573.244000] raid6: mmxx2 1879 MB/s
[17179573.312000] raid6: sse1x1 946 MB/s
[17179573.380000] raid6: sse1x2 1853 MB/s
[17179573.448000] raid6: sse2x1 1934 MB/s
[17179573.516000] raid6: sse2x2 2820 MB/s
[17179573.516000] raid6: using algorithm sse2x2 (2820 MB/s)
[17179573.516000] md: raid6 personality registered for level 6
[17179573.516000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179573.516000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[17179573.516000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179573.516000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179573.516000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179573.516000] VP_IDE: chipset revision 6
[17179573.516000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.516000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179573.516000] ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:pio
[17179573.516000] ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:pio, hdd:pio
[17179573.516000] Probing IDE interface ide0...
[17179573.528000] usbcore: registered new driver usbfs
[17179573.528000] usbcore: registered new driver hub
[17179573.532000] SCSI subsystem initialized
[17179573.540000] USB Universal Host Controller Interface driver v3.0
[17179573.540000] libata version 1.20 loaded.
[17179573.560000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179573.568000] md: raid10 personality registered for level 10
[17179574.380000] hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
[17179575.052000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.052000] Probing IDE interface ide1...
[17179575.620000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[17179575.620000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[17179575.620000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.620000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1
[17179575.620000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179575.620000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179575.620000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000cc00
[17179575.620000] usb usb1: configuration #1 chosen from 1 choice
[17179575.620000] hub 1-0:1.0: USB hub found
[17179575.620000] hub 1-0:1.0: 2 ports detected
[17179575.724000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.724000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1
[17179575.724000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179575.724000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179575.724000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d000
[17179575.724000] usb usb2: configuration #1 chosen from 1 choice
[17179575.724000] hub 2-0:1.0: USB hub found
[17179575.724000] hub 2-0:1.0: 2 ports detected
[17179575.828000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.828000] PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 1
[17179575.828000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179575.828000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179575.828000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d400
[17179575.828000] usb usb3: configuration #1 chosen from 1 choice
[17179575.828000] hub 3-0:1.0: USB hub found
[17179575.828000] hub 3-0:1.0: 2 ports detected
[17179575.932000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.932000] PCI: Via IRQ fixup for 0000:00:10.3, from 5 to 1
[17179575.932000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179575.932000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179575.932000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d800
[17179575.932000] usb usb4: configuration #1 chosen from 1 choice
[17179575.932000] hub 4-0:1.0: USB hub found
[17179575.932000] hub 4-0:1.0: 2 ports detected
[17179576.036000] sata_via 0000:00:0f.0: version 1.1
[17179576.036000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179576.036000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9
[17179576.036000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179576.036000] ata1: SATA max UDMA/133 cmd 0xB000 ctl 0xB402 bmdma 0xC000 irq 169
[17179576.036000] ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma 0xC008 irq 169
[17179576.200000] ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7468 86:3c41 87:4023 88:407f
[17179576.200000] ata1: dev 0 ATA-7, max UDMA/133, 312579695 sectors: LBA48
[17179576.208000] ata1: dev 0 configured for UDMA/133
[17179576.208000] scsi0 : sata_via
[17179576.372000] scsi1 : sata_via
[17179576.372000] Vendor: ATA Model: WDC WD1600JS-22N Rev: 10.0
[17179576.372000] Type: Direct-Access ANSI SCSI revision: 05
[17179576.372000] 8139cp: pci dev 0000:00:13.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[17179576.372000] 8139cp: Try the "8139too" driver instead.
[17179576.376000] 8139too Fast Ethernet driver 0.9.27
[17179576.376000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.376000] PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 1
[17179576.376000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179576.376000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179576.376000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xea000000
[17179576.376000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.376000] usb usb5: configuration #1 chosen from 1 choice
[17179576.376000] hub 5-0:1.0: USB hub found
[17179576.376000] hub 5-0:1.0: 8 ports detected
[17179576.480000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179576.480000] eth0: RealTek RTL8139 at 0xf88a4000, 00:14:85:dc:2d:f2, IRQ 185
[17179576.480000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[17179576.496000] SCSI device sda: 312579695 512-byte hdwr sectors (160041 MB)
[17179576.496000] sda: Write Protect is off
[17179576.496000] sda: Mode Sense: 00 3a 00 00
[17179576.496000] SCSI device sda: drive cache: write back
[17179576.496000] SCSI device sda: 312579695 512-byte hdwr sectors (160041 MB)
[17179576.496000] sda: Write Protect is off
[17179576.496000] sda: Mode Sense: 00 3a 00 00
[17179576.496000] SCSI device sda: drive cache: write back
[17179576.496000] sda:<6>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.496000] Uniform CD-ROM driver Revision: 3.20
[17179576.508000] sda1 sda2 sda3 sda4 < sda5 >
[17179576.532000] sd 0:0:0:0: Attached scsi disk sda
[17179576.536000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179576.976000] kjournald starting. Commit interval 5 seconds
[17179576.976000] EXT3-fs: mounted filesystem with ordered data mode.
[17179584.228000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179584.788000] NET: Registered protocol family 10
[17179584.788000] lo: Disabled Privacy Extensions
[17179584.788000] IPv6 over IPv4 tunneling driver
[17179585.772000] Linux agpgart interface v0.101 (c) Dave Jones
[17179585.828000] agpgart: Detected VIA P4M800CE chipset
[17179585.840000] agpgart: AGP aperture is 128M @ 0xd0000000
[17179585.980000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179586.036000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179586.228000] input: PC Speaker as /class/input/input1
[17179586.260000] parport: PnPBIOS parport detected.
[17179586.260000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,
[17179586.496000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[17179586.496000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179586.496000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193
[17179586.496000] PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 1
[17179586.500000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179586.748000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179586.784000] ts: Compaq touchscreen protocol output
[17179587.144000] lp0: using parport0 (interrupt-driven).
[17179587.192000] fuse init (API version 7.6)
[17179587.252000] Adding 2843464k swap on /dev/disk/
[17179587.316000] EXT3 FS on sda3, internal journal
[17179592.416000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179592.416000] NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
[17179592.500000] NTFS volume version 3.1.
[17179592.552000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179592.608000] Adding 2843464k swap on /dev/disk/
[17179593.944000] NET: Registered protocol family 17
[17179595.748000] eth0: no IPv6 routers present
[17179599.172000] ACPI: Power Button (FF) [PWRF]
[17179599.172000] ACPI: Power Button (CM) [PWRB]
[17179599.300000] ibm_acpi: ec object not found
[17179599.336000] pcc_acpi: loading...
[17179602.948000] [drm] Initialized drm 1.0.1 20051102
[17179602.964000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[17179602.968000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179604.548000] ppdev: user-space parallel port driver
[17179604.804000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179604.804000] apm: disabled - APM is not SMP safe.
[17179606.124000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179606.124000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179606.124000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17179606.424000] [drm] Setting GART location based on new memory map
[17179606.424000] [drm] Loading R200 Microcode
[17179606.424000] [drm] writeback test succeeded in 1 usecs
[17180123.896000] cdrom: This disc doesn't have any tracks I recognize!
[17180223.152000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17180233.676000] eth0: no IPv6 routers present
[17180390.364000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17180400.616000] eth0: no IPv6 routers present
[17180700.644000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17180711.160000] eth0: no IPv6 routers present
[17181697.404000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17181707.780000] eth0: no IPv6 routers present
[17181842.144000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17181852.304000] eth0: no IPv6 routers present
[17181977.508000] eth0: Promiscuous mode enabled.
[17181977.508000] device eth0 entered promiscuous mode
[17181977.508000] audit(118228566
[17182003.144000] device eth0 left promiscuous mode
[17182003.144000] audit(118228569
[17182097.616000] eth0: Promiscuous mode enabled.
[17182097.616000] device eth0 entered promiscuous mode
[17182097.616000] audit(118228578
[17182128.348000] device eth0 left promiscuous mode
[17182128.348000] audit(118228582
[17182206.344000] eth0: Promiscuous mode enabled.
[17182206.344000] device eth0 entered promiscuous mode
[17182206.344000] audit(118228589
[17182234.852000] device eth0 left promiscuous mode
[17182234.852000] audit(118228592
[17182440.396000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17182451.380000] eth0: no IPv6 routers present
[17182722.532000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17182733.296000] eth0: no IPv6 routers present
[17182889.412000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17182899.680000] eth0: no IPv6 routers present
[17183027.864000] eth0: Promiscuous mode enabled.
[17183027.864000] device eth0 entered promiscuous mode
[17183027.864000] audit(118228671
[17183035.236000] device eth0 left promiscuous mode
[17183035.236000] audit(118228672
[17183041.228000] eth0: Promiscuous mode enabled.
[17183041.228000] device eth0 entered promiscuous mode
[17183041.228000] audit(118228673
[17183112.924000] device eth0 left promiscuous mode
[17183112.924000] audit(118228680
[17183343.668000] eth0: Promiscuous mode enabled.
[17183343.668000] device eth0 entered promiscuous mode
[17183343.668000] audit(118228703
[17183364.252000] device eth0 left promiscuous mode
[17183364.252000] audit(118228705
[17183759.344000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17183769.948000] eth0: no IPv6 routers present
[17184518.232000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17184529.220000] eth0: no IPv6 routers present
[17185766.640000] eth0: Promiscuous mode enabled.
[17185766.640000] device eth0 entered promiscuous mode
[17185766.640000] audit(118228945
[17185779.608000] device eth0 left promiscuous mode
[17185779.608000] audit(118228947
[17185820.752000] eth0: Promiscuous mode enabled.
[17185820.752000] device eth0 entered promiscuous mode
[17185820.752000] audit(118228951
[17185852.308000] device eth0 left promiscuous mode
[17185852.308000] audit(118228954
[17185852.396000] eth0: Promiscuous mode enabled.
[17185852.396000] device eth0 entered promiscuous mode
[17185852.396000] audit(118228954
[17185874.236000] device eth0 left promiscuous mode
[17185874.236000] audit(118228956
[17186091.696000] eth0: Promiscuous mode enabled.
[17186091.696000] device eth0 entered promiscuous mode
[17186091.696000] audit(118228978
[17186119.380000] device eth0 left promiscuous mode
[17186119.380000] audit(118228981
[17186119.504000] eth0: Promiscuous mode enabled.
[17186119.504000] device eth0 entered promiscuous mode
[17186119.504000] audit(118228981
[17186141.900000] device eth0 left promiscuous mode
[17186141.900000] audit(118228983
These symptoms look very similar to tcp window scaling problems, see bug #59331 and bug #89160 for more details. Please try and see if disabling tcp window scaling as per the instructions found in these bug reports fixes your problem.