Atheros 5005 permanently disappears all of a sudden
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux-restricted-modules-2.6.20 (Ubuntu) |
Fix Released
|
Undecided
|
Unassigned |
Bug Description
I'm using Ubuntu 7.04 on my Acer Laptop. ( Turion X2, 1.5 GiG RAM, Atheros 5005 WLAN, Broadcom Bluetooth, ATI Xpress 1100, etc., )
---
When I install Ubuntu, the linux distro works out of the box. WLAN, Bluetooth, ATI Display, etc., after a few days suddenly the
Wireless interface is not found on the system., only reiunstalluing helps., ( i tried recompiling madwifi without any luck )
ifconfig shows eth0 and lo only.
Can anyone help me get back wifi without reinstalling wifi.
---
cat /proc/version:
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
---
lspci:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]
08:01.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
08:01.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
08:01.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
08:01.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
08:01.4 FLASH memory: ENE Technology Inc Unknown device 0551 (rev 01)
08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/
08:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
---
dmesg:
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009dc00 end: 000000000009dc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009dc00 size: 0000000000002400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000030000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000004fd90000 end: 000000004fe90000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000004fe90000 size: 000000000000c000 end: 000000004fe9c000 type: 3
[ 0.000000] copy_e820_map() start: 000000004fe9c000 size: 0000000000064000 end: 000000004ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000004ff00000 size: 0000000010100000 end: 0000000060000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004fe90000 (usable)
[ 0.000000] BIOS-e820: 000000004fe90000 - 000000004fe9c000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004fe9c000 - 000000004ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004ff00000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 382MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f8a50
[ 0.000000] Entering add_active_range(0, 0, 327312) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 327312
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 327312
[ 0.000000] On node 0 totalpages: 327312
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 765 pages used for memmap
[ 0.000000] HighMem zone: 97171 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f8a20
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x4fe94d0c
[ 0.000000] ACPI: FADT (v001 ATI Bowfin 0x06040000 ATI 0x000f4240) @ 0x4fe9bd52
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x4fe9bdc6
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x4fe9bf48
[ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x4fe9bf9c
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x4fe9bfd8
[ 0.000000] ACPI: DSDT (v001 ATI SB460 0x06040000 MSFT 0x02000002) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
[ 0.000000] Detected 1600.128 MHz processor.
[ 25.056225] Built 1 zonelists. Total pages: 324755
[ 25.056229] Kernel command line: root=UUID=
[ 25.056384] mapped APIC to ffffd000 (fee00000)
[ 25.056387] mapped IOAPIC to ffffc000 (fec00000)
[ 25.056390] Enabling fast FPU save and restore... done.
[ 25.056393] Enabling unmasked SIMD FPU exception support... done.
[ 25.056401] Initializing CPU#0
[ 25.056467] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 25.057457] Console: colour VGA+ 80x25
[ 25.060445] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 25.061221] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 25.099602] Memory: 1286256k/1309248k available (1992k kernel code, 21760k reserved, 893k data, 328k init, 391744k highmem)
[ 25.099668] virtual kernel memory layout:
[ 25.099669] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 25.099671] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 25.099672] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 25.099674] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 25.099675] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 25.099677] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 25.099678] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 25.100033] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 25.176294] Calibrating delay using timer specific routine.. 3203.64 BogoMIPS (lpj=6407297)
[ 25.176424] Security Framework v1.0.0 initialized
[ 25.176475] SELinux: Disabled at boot.
[ 25.176534] Mount-cache hash table entries: 512
[ 25.176721] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 25.176731] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 25.176779] CPU: L2 Cache: 256K (64 bytes/line)
[ 25.176828] CPU 0(2) -> Core 0
[ 25.176870] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 25.176883] Compat vDSO mapped to ffffe000.
[ 25.176929] Remapping vsyscall page to ffffe000
[ 25.176983] Checking 'hlt' instruction... OK.
[ 25.192456] SMP alternatives: switching to UP code
[ 25.192925] Early unpacking initramfs... done
[ 25.553696] ACPI: Core revision 20060707
[ 25.557238] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 26.032323] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 26.032462] SMP alternatives: switching to SMP code
[ 26.032617] Booting processor 1/1 eip 3000
[ 26.045023] Initializing CPU#1
[ 26.125054] Calibrating delay using timer specific routine.. 3200.22 BogoMIPS (lpj=6400443)
[ 26.125063] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 26.125070] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 26.125073] CPU: L2 Cache: 256K (64 bytes/line)
[ 26.125076] CPU 1(2) -> Core 1
[ 26.125077] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 26.123057] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 26.123394] Total of 2 processors activated (6403.87 BogoMIPS).
[ 26.123603] ENABLING IO-APIC IRQs
[ 26.123837] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 26.270640] checking TSC synchronization across 2 CPUs:
[ 0.000040] CPU#0 had -1100 usecs TSC skew, fixed it up.
[ 0.000084] CPU#1 had 1100 usecs TSC skew, fixed it up.
[ 0.003958] Brought up 2 CPUs
[ 0.049588] migration_cost=184
[ 0.049977] Booting paravirtualized kernel on bare hardware
[ 0.050117] Time: 21:44:37 Date: 04/26/107
[ 0.050191] NET: Registered protocol family 16
[ 0.050320] EISA bus registered
[ 0.050367] ACPI: bus type pci registered
[ 0.066227] PCI: BIOS BUG #81[49435000] found
[ 0.066272] PCI: Using configuration type 1
[ 0.066315] Setting up standard PCI resources
[ 0.073593] ACPI: Interpreter enabled
[ 0.073642] ACPI: Using IOAPIC for interrupt routing
[ 0.074184] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.074233] PCI: Probing PCI hardware (bus 00)
[ 0.076242] Boot video device is 0000:01:05.0
[ 0.077247] PCI: Transparent bridge - 0000:00:14.4
[ 0.077366] PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-
[ 0.077417] Please report the result to linux-kernel to fix this permanently
[ 0.077506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.080882] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.081140] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.081376] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.081679] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.083284] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.083869] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.084410] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.084947] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.085482] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.086020] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.086557] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.087092] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.087629] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 0.110007] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.110331] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.110947] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.111004] pnp: PnP ACPI init
[ 0.113854] pnp: PnP ACPI: found 10 devices
[ 0.113902] PnPBIOS: Disabled by ACPI PNP
[ 0.114000] PCI: Using ACPI for IRQ routing
[ 0.114044] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.114099] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[ 0.114144] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[ 0.114189] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 0.114233] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 0.114279] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 0.114323] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 0.114368] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 0.114412] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 0.114575] NET: Registered protocol family 8
[ 0.114619] NET: Registered protocol family 20
[ 0.114939] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.114986] pnp: 00:08: ioport range 0x220-0x22f has been reserved
[ 0.115356] PCI: Bridge: 0000:00:01.0
[ 0.115400] IO window: 9000-9fff
[ 0.115444] MEM window: b0100000-b01fffff
[ 0.115489] PREFETCH window: c0000000-cfffffff
[ 0.115534] PCI: Bridge: 0000:00:04.0
[ 0.115576] IO window: disabled.
[ 0.115620] MEM window: disabled.
[ 0.115663] PREFETCH window: disabled.
[ 0.115706] PCI: Bridge: 0000:00:05.0
[ 0.115749] IO window: disabled.
[ 0.115806] MEM window: disabled.
[ 0.115848] PREFETCH window: disabled.
[ 0.115892] PCI: Bridge: 0000:00:06.0
[ 0.115935] IO window: disabled.
[ 0.115979] MEM window: disabled.
[ 0.116021] PREFETCH window: disabled.
[ 0.116065] PCI: Bridge: 0000:00:07.0
[ 0.116107] IO window: disabled.
[ 0.116150] MEM window: disabled.
[ 0.116192] PREFETCH window: disabled.
[ 0.116244] PCI: Bus 9, cardbus bridge: 0000:08:01.0
[ 0.116287] IO window: 0000a400-0000a4ff
[ 0.116334] IO window: 0000a800-0000a8ff
[ 0.116382] PREFETCH window: 68000000-6bffffff
[ 0.116430] MEM window: 70000000-73ffffff
[ 0.116477] PCI: Bridge: 0000:00:14.4
[ 0.116522] IO window: a000-afff
[ 0.116569] MEM window: b0200000-b02fffff
[ 0.116616] PREFETCH window: 68000000-6bffffff
[ 0.116679] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.116688] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.116695] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.116703] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.116731] PCI: Enabling device 0000:08:01.0 (0000 -> 0003)
[ 0.116783] ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 23 (level, low) -> IRQ 16
[ 0.116913] NET: Registered protocol family 2
[ 0.163988] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.164200] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.165223] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.165782] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.166321] TCP reno registered
[ 0.180029] checking if image is initramfs... it is
[ 0.890192] Freeing initrd memory: 6991k freed
[ 0.890380] Simple Boot Flag at 0x36 set to 0x1
[ 1.536000] audit: initializing netlink socket (disabled)
[ 1.536000] audit(118021587
[ 1.536000] highmem bounce pool size: 64 pages
[ 1.536000] VFS: Disk quotas dquot_6.5.1
[ 1.536000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.536000] io scheduler noop registered
[ 1.536000] io scheduler anticipatory registered
[ 1.536000] io scheduler deadline registered
[ 1.536000] io scheduler cfq registered (default)
[ 1.536000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.536000] assign_
[ 1.536000] Allocate Port Service[
[ 1.536000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 1.536000] assign_
[ 1.536000] Allocate Port Service[
[ 1.536000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 1.536000] assign_
[ 1.536000] Allocate Port Service[0000:00:0
[ 1.536000] isapnp: Scanning for PnP cards...
[ 1.892000] isapnp: No Plug & Play device found
[ 1.928000] Real Time Clock Driver v1.12ac
[ 1.928000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.928000] mice: PS/2 mouse device common for all mice
[ 1.928000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.928000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.928000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.928000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.928000] PNP: PS/2 Controller [PNP0303:
[ 1.932000] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.932000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.932000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.932000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.932000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.932000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.932000] EISA: Probing bus 0 at eisa.0
[ 1.932000] Cannot allocate resource for EISA slot 1
[ 1.932000] Cannot allocate resource for EISA slot 8
[ 1.932000] EISA: Detected 0 cards.
[ 1.964000] TCP cubic registered
[ 1.964000] NET: Registered protocol family 1
[ 1.964000] Starting balanced_irq
[ 1.964000] Using IPI No-Shortcut mode
[ 1.964000] ACPI: (supports S0 S3 S4 S5)
[ 1.964000] Magic number: 7:859:753
[ 1.964000] Freeing unused kernel memory: 328k freed
[ 1.964000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.968000] Time: acpi_pm clocksource has been installed.
[ 2.212000] Capability LSM initialized
[ 2.268000] ACPI: Thermal Zone [THRM] (56 C)
[ 2.800000] SCSI subsystem initialized
[ 2.808000] libata version 2.20 loaded.
[ 2.812000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 2.812000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
[ 2.812000] ATIIXP: chipset revision 128
[ 2.812000] ATIIXP: not 100% native mode: will probe irqs later
[ 2.812000] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio
[ 2.812000] ATIIXP: simplex device: DMA disabled
[ 2.812000] ide1: ATIIXP Bus-Master DMA disabled (BIOS)
[ 2.812000] Probing IDE interface ide0...
[ 2.892000] usbcore: registered new interface driver usbfs
[ 2.892000] usbcore: registered new interface driver hub
[ 2.892000] usbcore: registered new device driver usb
[ 2.892000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.976000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.552000] hda: PIONEER DVD-RW DVR-K17RS, ATAPI CD/DVD-ROM drive
[ 3.888000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.888000] Probing IDE interface ide1...
[ 4.452000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.452000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.452000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 4.452000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xb0005000
[ 4.460000] hda: ATAPI 31X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(33)
[ 4.460000] Uniform CD-ROM driver Revision: 3.20
[ 4.508000] usb usb1: configuration #1 chosen from 1 choice
[ 4.508000] hub 1-0:1.0: USB hub found
[ 4.508000] hub 1-0:1.0: 4 ports detected
[ 4.612000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.612000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.612000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 4.612000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xb0006000
[ 4.668000] usb usb2: configuration #1 chosen from 1 choice
[ 4.668000] hub 2-0:1.0: USB hub found
[ 4.668000] hub 2-0:1.0: 4 ports detected
[ 4.772000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.772000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.772000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 4.772000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xb0007000
[ 4.772000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.772000] usb usb3: configuration #1 chosen from 1 choice
[ 4.772000] hub 3-0:1.0: USB hub found
[ 4.772000] hub 3-0:1.0: 8 ports detected
[ 4.876000] sata_sil 0000:00:12.0: version 2.2
[ 4.876000] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[ 4.876000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
[ 4.876000] ata1: SATA max UDMA/100 cmd 0xf8832080 ctl 0xf883208a bmdma 0xf8832000 irq 19
[ 4.876000] ata2: SATA max UDMA/100 cmd 0xf88320c0 ctl 0xf88320ca bmdma 0xf8832008 irq 19
[ 4.876000] scsi0 : sata_sil
[ 5.340000] usb 3-3: new high speed USB device using ehci_hcd and address 2
[ 5.344000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 5.352000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 5.352000] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[ 5.352000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.360000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 5.360000] ata1.00: configured for UDMA/100
[ 5.360000] scsi1 : sata_sil
[ 5.672000] ata2: SATA link down (SStatus 0 SControl 310)
[ 5.672000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[ 5.672000] 8139cp 0000:08:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 5.672000] 8139cp 0000:08:02.0: Try the "8139too" driver instead.
[ 5.676000] 8139too Fast Ethernet driver 0.9.28
[ 5.676000] ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 5.676000] eth0: RealTek RTL8139 at 0xf88d4c00, 00:16:36:b6:b0:3d, IRQ 20
[ 5.676000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.680000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 5.680000] sda: Write Protect is off
[ 5.680000] sda: Mode Sense: 00 3a 00 00
[ 5.680000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.680000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 5.680000] sda: Write Protect is off
[ 5.680000] sda: Mode Sense: 00 3a 00 00
[ 5.680000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.680000] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 5.768000] sd 0:0:0:0: Attached scsi disk sda
[ 5.772000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.088000] usb 1-4: new full speed USB device using ohci_hcd and address 3
[ 6.228000] Attempting manual resume
[ 6.228000] swsusp: Resume From Partition 8:7
[ 6.228000] PM: Checking swsusp image.
[ 6.228000] PM: Resume from disk failed.
[ 6.264000] kjournald starting. Commit interval 5 seconds
[ 6.264000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.300000] usb 1-4: configuration #1 chosen from 1 choice
[ 19.392000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 20.664000] NET: Registered protocol family 17
[ 20.740000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 20.744000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.844000] Linux agpgart interface v0.102 (c) Dave Jones
[ 20.968000] input: PC Speaker as /class/input/input2
[ 21.000000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 dev
[ 21.316000] Bluetooth: Core ver 2.11
[ 21.316000] NET: Registered protocol family 31
[ 21.316000] Bluetooth: HCI device and connection manager initialized
[ 21.316000] Bluetooth: HCI socket layer initialized
[ 21.384000] Bluetooth: HCI USB driver ver 2.9
[ 21.416000] ath_hal: module license 'Proprietary' taints kernel.
[ 21.416000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 21.456000] Yenta: CardBus bridge found at 0000:08:01.0 [1025:010f]
[ 21.456000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 21.456000] Yenta: Routing CardBus interrupts to PCI
[ 21.456000] Yenta TI: socket 0000:08:01.0, mfunc 0x00001202, devctl 0x44
[ 21.484000] sdhci: Secure Digital Host Controller Interface driver
[ 21.484000] sdhci: Copyright(c) Pierre Ossman
[ 21.516000] usbcore: registered new interface driver hci_usb
[ 21.604000] wlan: 0.8.4.2 (0.9.3)
[ 21.688000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 21.688000] Socket status: 30000006
[ 21.688000] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[ 21.688000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 21.688000] cs: IO port probe 0xa000-0xafff: clean.
[ 21.688000] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[ 21.688000] pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x6bffffff
[ 21.688000] sdhci: SDHCI controller found at 0000:08:01.2 [1524:0550] (rev 1)
[ 21.688000] ACPI: PCI Interrupt 0000:08:01.2[B] -> GSI 22 (level, low) -> IRQ 19
[ 21.688000] mmc0: SDHCI at 0xb0211400 irq 19 DMA
[ 21.708000] ath_pci: 0.9.4.5 (0.9.3)
[ 21.708000] ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 21.708000] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[ 21.708000] ACPI: PCI interrupt for device 0000:08:04.0 disabled
[ 21.916000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 21.952000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[ 22.000000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 22.068000] cs: IO port probe 0x100-0x3af: clean.
[ 22.072000] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[ 22.072000] cs: IO port probe 0x820-0x8ff: clean.
[ 22.072000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 22.072000] cs: IO port probe 0xa00-0xaff: clean.
[ 22.448000] fuse init (API version 7.8)
[ 22.552000] lp: driver loaded but no devices found
[ 22.652000] Adding 995988k swap on /dev/disk/
[ 22.868000] EXT3 FS on sda8, internal journal
[ 23.036000] NET: Registered protocol family 10
[ 23.036000] lo: Disabled Privacy Extensions
[ 23.240000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 23.312000] NTFS volume version 3.1.
[ 23.352000] NTFS volume version 3.1.
[ 23.396000] NTFS volume version 3.1.
[ 33.564000] eth0: no IPv6 routers present
[ 59.784000] ACPI: AC Adapter [ACAD] (on-line)
[ 59.820000] ACPI: Battery Slot [BAT1] (battery present)
[ 59.840000] No dock devices found.
[ 59.860000] Using specific hotkey driver
[ 59.972000] input: Power Button (FF) as /class/input/input4
[ 59.972000] ACPI: Power Button (FF) [PWRF]
[ 59.972000] input: Power Button (CM) as /class/input/input5
[ 59.972000] ACPI: Power Button (CM) [PWRB]
[ 59.996000] input: Lid Switch as /class/input/input6
[ 59.996000] ACPI: Lid Switch [LID]
[ 60.008000] input: Sleep Button (CM) as /class/input/input7
[ 60.008000] ACPI: Sleep Button (CM) [SLPB]
[ 60.160000] ibm_acpi: ec object not found
[ 60.240000] pcc_acpi: loading...
[ 60.260000] wmi_add device=c1be8c00
[ 60.260000] calling WQBA
[ 60.568000] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (version 2.00.00)
[ 60.568000] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x12
[ 60.568000] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 64.560000] cdrom: This disc doesn't have any tracks I recognize!
[ 66.500000] ppdev: user-space parallel port driver
[ 67.176000] [fglrx] Maximum main memory to use for locked dma buffers: 1171 MBytes.
[ 67.176000] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[ 67.288000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 69.132000] [fglrx] total GART = 130023424
[ 69.132000] [fglrx] free GART = 114032640
[ 69.132000] [fglrx] max single GART = 114032640
[ 69.132000] [fglrx] total LFB = 134217728
[ 69.132000] [fglrx] free LFB = 119828480
[ 69.132000] [fglrx] max single LFB = 119828480
[ 69.132000] [fglrx] total Inv = 134217728
[ 69.132000] [fglrx] free Inv = 134217728
[ 69.132000] [fglrx] max single Inv = 134217728
[ 69.132000] [fglrx] total TIM = 0
[ 71.936000] apm: BIOS not found.
[ 72.588000] Bluetooth: L2CAP ver 2.8
[ 72.588000] Bluetooth: L2CAP socket layer initialized
[ 72.732000] Bluetooth: RFCOMM socket layer initialized
[ 72.732000] Bluetooth: RFCOMM TTY layer initialized
[ 72.732000] Bluetooth: RFCOMM ver 1.8
[ 77.428000] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 81.264000] eth0: no IPv6 routers present
---
description: | updated |
Is this the lspci and '/proc/version' output with atheros running or after atheros vanished?
I have a similar problem (atheros vanished) but for me it happens after the upgrade to kernel 2.6.20-16-386. So if you have the problem in the same kernel version we could work on this bug together.