SoundBlaster live 5.1 mic not working

[an_seawolf]

Binary package hint: linux-source-2.6.20

Im on ubuntu 7.04-x86-64
MB=Abit kn8-nforce4 chipset with onboard sound disabled
Im using a PCI soundblaster live 5.1

Sound output works perfectly, but I can't get the mic to work. I have used this mic and my sb live 5.1 in linux before with no problems. I have spent a bunch of time messing with alsamixer but coudn't get the mic to work and just turned everything off I don't need for output.

here is the information asked for in the reporting sound bugs section its in the order the commands are listed

Mixers:
0: SigmaTel STAC9708,11

Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 20 [65%] [-16.50dB] [on]
  Front Right: Playback 20 [65%] [-16.50dB] [on]
Simple mixer control 'Headphone LFE',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Headphone',1
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 100
  Mono:
  Front Left: Playback 66 [66%] [-13.60dB]
  Front Right: Playback 66 [66%] [-13.60dB]
Simple mixer control 'Headphone Center',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Tone',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'Bass',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 40
  Front Left: 20 [50%]
  Front Right: 20 [50%]
Simple mixer control 'Treble',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 40
  Front Left: 20 [50%]
  Front Right: 20 [50%]
Simple mixer control '3D Control - Switch',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control '3D Control Sigmatel - Depth',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: 0 - 3
  Mono: 0 [0%]
Simple mixer control '3D Control Sigmatel - Rear Depth',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: 0 - 3
  Mono: 0 [0%]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 8 [26%] [-22.50dB] [on]
  Front Right: Playback 8 [26%] [-22.50dB] [on]
Simple mixer control 'Front',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 100
  Front Left: Capture 0 [0%] [-99999.99dB] [on]
  Front Right: Capture 0 [0%] [-99999.99dB] [on]
Simple mixer control 'Surround',0
  Capabilities: pvolume cvolume cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 100 [100%] [0.00dB]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 100 [100%] [0.00dB]
Simple mixer control 'Synth',0
  Capabilities: pvolume cvolume cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
Simple mixer control 'Wave',0
  Capabilities: pvolume cvolume cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 96 [96%] [-1.60dB] Capture 98 [98%] [0.80dB] [on]
  Front Right: Playback 96 [96%] [-1.60dB] Capture 98 [98%] [0.80dB] [on]
Simple mixer control 'Wave Center',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 0 [0%] [-99999.99dB]
Simple mixer control 'Wave LFE',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 0 [0%] [-99999.99dB]
Simple mixer control 'Wave Surround',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 100
  Mono:
  Front Left: Playback 0 [0%] [-99999.99dB]
  Front Right: Playback 0 [0%] [-99999.99dB]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 31 [100%] [12.00dB] [on] Capture [off]
  Front Right: Playback 31 [100%] [12.00dB] [on] Capture [off]
Simple mixer control 'Line LiveDrive',0
  Capabilities: pvolume cvolume cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
Simple mixer control 'Line2 LiveDrive',1
  Capabilities: pvolume cvolume cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 22 [71%] [-1.50dB] [on] Capture [off]
  Front Right: Playback 22 [71%] [-1.50dB] [on] Capture [off]
Simple mixer control 'Mic',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Mono
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono: Playback 31 [100%] [12.00dB] [off]
  Front Left: Capture [on]
  Front Right: Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Mic Select',0
  Capabilities: enum
  Items: 'Mic1' 'Mic2'
  Item0: 'Mic1'
Simple mixer control 'Video',0
  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Phone',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Mono
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono: Playback 0 [0%] [-34.50dB] [off]
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'IEC958 Coaxial',0
  Capabilities: pvolume cvolume cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
Simple mixer control 'IEC958 LiveDrive',0
  Capabilities: pvolume cvolume cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
Simple mixer control 'IEC958 Optical Raw',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [off]
  Front Right: Playback [off]
Simple mixer control 'IEC958 TTL',0
  Capabilities: pvolume cvolume cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB] [off]
Simple mixer control 'PC Speaker',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 15
  Mono: Playback 0 [0%] [-45.00dB] [off]
Simple mixer control 'Aux',0
  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 15
  Front Left: Capture 15 [100%] [22.50dB] [on]
  Front Right: Capture 15 [100%] [22.50dB] [on]
Simple mixer control 'Mix',0
  Capabilities: cswitch cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
  Capabilities: cswitch cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'AC97',0
  Capabilities: pvolume cvolume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 100 Capture 0 - 100
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
Simple mixer control 'External Amplifier',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'SB Live Analog/Digital Output Jack',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Sigmatel 4-Speaker Stereo',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Sigmatel Output Bias',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Sigmatel Surround',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-46.50dB] [off]
  Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]

00:00.0 0580: 10de:005e (rev a3)
 Subsystem: 147b:1c05
 Flags: bus master, 66MHz, fast devsel, latency 0
 Capabilities: <access denied>

00:01.0 0601: 10de:0050 (rev a3)
 Subsystem: 147b:1c05
 Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 0c05: 10de:0052 (rev a2)
 Subsystem: 147b:1c05
 Flags: 66MHz, fast devsel, IRQ 3
 I/O ports at fc00 [size=32]
 I/O ports at 1c00 [size=64]
 I/O ports at 1c40 [size=64]
 Capabilities: <access denied>

00:02.0 0c03: 10de:005a (rev a2) (prog-if 10 [OHCI])
 Subsystem: 147b:1c05
 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: <access denied>

00:02.1 0c03: 10de:005b (rev a3) (prog-if 20 [EHCI])
 Subsystem: 147b:1c05
 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
 Memory at feb00000 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>

00:06.0 0101: 10de:0053 (rev f2) (prog-if 8a [Master SecP PriP])
 Subsystem: 147b:1c05
 Flags: bus master, 66MHz, fast devsel, latency 0
 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
 [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
 [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
 [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
 I/O ports at e800 [size=16]
 Capabilities: <access denied>

00:07.0 0101: 10de:0054 (rev f3) (prog-if 85 [Master SecO PriO])
 Subsystem: 147b:1c05
 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
 I/O ports at 09f0 [size=8]
 I/O ports at 0bf0 [size=4]
 I/O ports at 0970 [size=8]
 I/O ports at 0b70 [size=4]
 I/O ports at d400 [size=16]
 Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: <access denied>

00:08.0 0101: 10de:0055 (rev f3) (prog-if 85 [Master SecO PriO])
 Subsystem: 147b:1c05
 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
 I/O ports at 09e0 [size=8]
 I/O ports at 0be0 [size=4]
 I/O ports at 0960 [size=8]
 I/O ports at 0b60 [size=4]
 I/O ports at c000 [size=16]
 Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: <access denied>

00:09.0 0604: 10de:005c (rev a2) (prog-if 01 [Subtractive decode])
 Flags: bus master, 66MHz, fast devsel, latency 0
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
 I/O behind bridge: 0000a000-0000afff
 Memory behind bridge: fde00000-fdefffff
 Prefetchable memory behind bridge: fdf00000-fdffffff

00:0a.0 0680: 10de:0057 (rev a3)
 Subsystem: 147b:1c05
 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
 Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
 I/O ports at bc00 [size=8]
 Capabilities: <access denied>

00:0b.0 0604: 10de:005d (rev a3) (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 I/O behind bridge: 00009000-00009fff
 Memory behind bridge: fdd00000-fddfffff
 Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
 Capabilities: <access denied>

00:0c.0 0604: 10de:005d (rev a3) (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
 I/O behind bridge: 00008000-00008fff
 Memory behind bridge: fdb00000-fdbfffff
 Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
 Capabilities: <access denied>

00:0d.0 0604: 10de:005d (rev a3) (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
 I/O behind bridge: 00007000-00007fff
 Memory behind bridge: fd900000-fd9fffff
 Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
 Capabilities: <access denied>

00:0e.0 0604: 10de:005d (rev a3) (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
 I/O behind bridge: 00006000-00006fff
 Memory behind bridge: fa000000-fcffffff
 Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
 Capabilities: <access denied>

00:18.0 0600: 1022:1100
 Flags: fast devsel
 Capabilities: <access denied>

00:18.1 0600: 1022:1101
 Flags: fast devsel

00:18.2 0600: 1022:1102
 Flags: fast devsel

00:18.3 0600: 1022:1103
 Flags: fast devsel

01:06.0 0401: 1102:0002 (rev 07)
 Subsystem: 1102:8061
 Flags: bus master, medium devsel, latency 32, IRQ 18
 I/O ports at ac00 [size=32]
 Capabilities: <access denied>

01:06.1 0980: 1102:7002 (rev 07)
 Subsystem: 1102:0020
 Flags: bus master, medium devsel, latency 32
 I/O ports at a800 [size=8]
 Capabilities: <access denied>

05:00.0 0300: 10de:0292 (rev a1) (prog-if 00 [VGA])
 Subsystem: 107d:2a6a
 Flags: bus master, fast devsel, latency 0, IRQ 18
 Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
 Memory at d0000000 (64-bit, prefetchable) [size=256M]
 Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
 I/O ports at 6c00 [size=128]
 [virtual] Expansion ROM at fc000000 [disabled] [size=128K]
 Capabilities: <access denied>

Names of available sound cards:
Live

[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] Command line: root=UUID=9149744f-0c20-4a7d-9908-42325804bf97 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7930
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff3040
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff30c0
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000007fff9a00
[ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9c40
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9940
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fff0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524272
[ 0.000000] On node 0 totalpages: 524175
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1086 pages reserved
[ 0.000000] DMA zone: 2857 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515922
[ 0.000000] Kernel command line: root=UUID=9149744f-0c20-4a7d-9908-42325804bf97 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 18.964018] Console: colour VGA+ 80x25
[ 18.964919] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 18.966313] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 18.966788] Checking aperture...
[ 18.966792] CPU 0: aperture @ 880000000 size 32 MB
[ 18.966793] Aperture too small (32 MB)
[ 18.971722] No AGP bridge found
[ 18.988327] Memory: 2053124k/2097088k available (2217k kernel code, 43576k reserved, 1162k data, 304k init)
[ 19.064839] Calibrating delay using timer specific routine.. 4423.08 BogoMIPS (lpj=8846166)
[ 19.064887] Security Framework v1.0.0 initialized
[ 19.064892] SELinux: Disabled at boot.
[ 19.064913] Mount-cache hash table entries: 256
[ 19.065032] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 19.065034] CPU: L2 Cache: 512K (64 bytes/line)
[ 19.065037] CPU 0/0 -> Node 0
[ 19.065039] CPU: Physical Processor ID: 0
[ 19.065040] CPU: Processor Core ID: 0
[ 19.065055] SMP alternatives: switching to UP code
[ 19.065268] Early unpacking initramfs... done
[ 19.358901] ACPI: Core revision 20060707
[ 19.361198] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 19.420823] Using local APIC timer interrupts.
[ 19.466043] result 12558092
[ 19.466044] Detected 12.558 MHz APIC timer.
[ 19.468777] SMP alternatives: switching to SMP code
[ 19.468842] Booting processor 1/2 APIC 0x1
[ 19.479523] Initializing CPU#1
[ 19.556964] Calibrating delay using timer specific routine.. 4420.74 BogoMIPS (lpj=8841496)
[ 19.556970] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 19.556972] CPU: L2 Cache: 512K (64 bytes/line)
[ 19.556974] CPU 1/1 -> Node 0
[ 19.556976] CPU: Physical Processor ID: 0
[ 19.556977] CPU: Processor Core ID: 1
[ 19.557046] AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 19.560966] CPU 1: Syncing TSC to CPU 0.
[ 19.560618] CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 492 cycles)
[ 19.560627] Brought up 2 CPUs
[ 19.560669] Disabling vsyscall due to use of PM timer
[ 19.560671] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 19.560673] time.c: Detected 2210.220 MHz processor.
[ 20.248700] migration_cost=135
[ 20.248978] Time: 21:54:26 Date: 04/18/107
[ 20.249011] NET: Registered protocol family 16
[ 20.249080] ACPI: bus type pci registered
[ 20.249085] PCI: Using configuration type 1
[ 20.256314] ACPI: Interpreter enabled
[ 20.256317] ACPI: Using IOAPIC for interrupt routing
[ 20.256862] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.256865] PCI: Probing PCI hardware (bus 00)
[ 20.259239] PCI: Transparent bridge - 0000:00:09.0
[ 20.259438] Boot video device is 0000:05:00.0
[ 20.259494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.325316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 20.327286] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 20.327613] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 20.327934] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 10 11)
[ 20.328267] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 20.328586] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 20.328907] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 10 11)
[ 20.329230] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 20.329551] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 10 11)
[ 20.329874] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 20.330195] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 10 *11)
[ 20.330516] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 10 11)
[ 20.330839] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 *10 11)
[ 20.331160] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 20.331492] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 10 *11)
[ 20.331824] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 *10 11)
[ 20.332163] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 20.332528] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 20.332890] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 20.333248] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 20.333606] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 20.333882] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 20.334258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 20.334636] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 20.335007] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 20.335378] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 20.335750] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 20.336125] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 20.336496] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 20.336868] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 20.337249] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 20.337629] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 20.338009] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 20.444089] ACPI: Power Resource [PFAN] (off)
[ 20.444191] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.444203] pnp: PnP ACPI init
[ 20.450835] pnp: PnP ACPI: found 14 devices
[ 20.450884] PCI: Using ACPI for IRQ routing
[ 20.450888] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 20.450949] NET: Registered protocol family 8
[ 20.450951] NET: Registered protocol family 20
[ 20.451377] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[ 20.451380] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 20.451383] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 20.451386] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[ 20.451389] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 20.451391] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 20.451655] PCI: Bridge: 0000:00:09.0
[ 20.451658] IO window: a000-afff
[ 20.451661] MEM window: fde00000-fdefffff
[ 20.451663] PREFETCH window: fdf00000-fdffffff
[ 20.451666] PCI: Bridge: 0000:00:0b.0
[ 20.451668] IO window: 9000-9fff
[ 20.451670] MEM window: fdd00000-fddfffff
[ 20.451673] PREFETCH window: fdc00000-fdcfffff
[ 20.451675] PCI: Bridge: 0000:00:0c.0
[ 20.451677] IO window: 8000-8fff
[ 20.451679] MEM window: fdb00000-fdbfffff
[ 20.451682] PREFETCH window: fda00000-fdafffff
[ 20.451684] PCI: Bridge: 0000:00:0d.0
[ 20.451686] IO window: 7000-7fff
[ 20.451689] MEM window: fd900000-fd9fffff
[ 20.451691] PREFETCH window: fd800000-fd8fffff
[ 20.451695] PCI: Bridge: 0000:00:0e.0
[ 20.451697] IO window: 6000-6fff
[ 20.451700] MEM window: fa000000-fcffffff
[ 20.451702] PREFETCH window: d0000000-dfffffff
[ 20.451708] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 20.451715] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 20.451720] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 20.451725] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 20.451729] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 20.451767] NET: Registered protocol family 2
[ 20.487983] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.488278] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 20.490258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 20.490756] TCP: Hash tables configured (established 262144 bind 65536)
[ 20.490759] TCP reno registered
[ 20.504033] checking if image is initramfs... it is
[ 21.056912] Freeing initrd memory: 7304k freed
[ 21.061006] audit: initializing netlink socket (disabled)
[ 21.061018] audit(1179525267.052:1): initialized
[ 21.061180] VFS: Disk quotas dquot_6.5.1
[ 21.061198] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 21.061238] io scheduler noop registered
[ 21.061240] io scheduler anticipatory registered
[ 21.061242] io scheduler deadline registered
[ 21.061254] io scheduler cfq registered (default)
[ 21.079569] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
[ 21.079576] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 21.079581] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
[ 21.079588] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 21.079593] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
[ 21.079599] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 21.079604] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
[ 21.079610] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 21.079750] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 21.079766] assign_interrupt_mode Found MSI capability
[ 21.079769] Allocate Port Service[0000:00:0b.0:pcie00]
[ 21.079825] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 21.079841] assign_interrupt_mode Found MSI capability
[ 21.079843] Allocate Port Service[0000:00:0c.0:pcie00]
[ 21.079897] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 21.079913] assign_interrupt_mode Found MSI capability
[ 21.079914] Allocate Port Service[0000:00:0d.0:pcie00]
[ 21.079966] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 21.079981] assign_interrupt_mode Found MSI capability
[ 21.079983] Allocate Port Service[0000:00:0e.0:pcie00]
[ 21.101930] Real Time Clock Driver v1.12ac
[ 21.101970] Linux agpgart interface v0.102 (c) Dave Jones
[ 21.101972] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.102078] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.102533] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.102710] mice: PS/2 mouse device common for all mice
[ 21.103226] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.103358] input: Macintosh mouse button emulation as /class/input/input0
[ 21.103388] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.103391] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.103547] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 21.105736] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.105740] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.105817] TCP cubic registered
[ 21.105825] NET: Registered protocol family 1
[ 21.105890] ACPI: (supports S0 S3 S4 S5)
[ 21.105931] Magic number: 7:465:955
[ 21.105983] hash matches device ptyzc
[ 21.106026] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 21.106091] Freeing unused kernel memory: 304k freed
[ 21.124203] input: AT Translated Set 2 keyboard as /class/input/input1
[ 22.272364] Capability LSM initialized
[ 22.506739] ACPI: Transitioning device [FAN] to D3
[ 22.506742] ACPI: Transitioning device [FAN] to D3
[ 22.506745] ACPI: Fan [FAN] (off)
[ 22.510837] ACPI: Invalid passive threshold
[ 22.511674] ACPI: Thermal Zone [THRM] (45 C)
[ 22.886130] SCSI subsystem initialized
[ 22.898153] libata version 2.20 loaded.
[ 22.926439] usbcore: registered new interface driver usbfs
[ 22.926464] usbcore: registered new interface driver hub
[ 22.926487] usbcore: registered new device driver usb
[ 22.944829] sata_nv 0000:00:07.0: version 3.3
[ 22.945369] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 22.945376] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
[ 22.945386] sata_nv 0000:00:07.0: Using ADMA mode
[ 22.945402] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 22.946890] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 22.946942] ata1: SATA max UDMA/133 cmd 0xffffc20000004480 ctl 0xffffc200000044a0 bmdma 0x000000000001d400 irq 23
[ 22.946986] ata2: SATA max UDMA/133 cmd 0xffffc20000004580 ctl 0xffffc200000045a0 bmdma 0x000000000001d408 irq 23
[ 22.946996] scsi0 : sata_nv
[ 22.971003] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 22.973686] Floppy drive(s): fd0 is 1.44M
[ 22.993864] FDC 0 is a post-1991 82077
[ 23.262122] ata1: SATA link down (SStatus 0 SControl 300)
[ 23.262134] scsi1 : sata_nv
[ 23.577914] ata2: SATA link down (SStatus 0 SControl 300)
[ 23.579049] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 23.579056] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 23.579066] sata_nv 0000:00:08.0: Using ADMA mode
[ 23.579079] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 23.579134] ata3: SATA max UDMA/133 cmd 0xffffc20000006480 ctl 0xffffc200000064a0 bmdma 0x000000000001c000 irq 22
[ 23.579173] ata4: SATA max UDMA/133 cmd 0xffffc20000006580 ctl 0xffffc200000065a0 bmdma 0x000000000001c008 irq 22
[ 23.579183] scsi2 : sata_nv
[ 23.893707] ata3: SATA link down (SStatus 0 SControl 300)
[ 23.893717] scsi3 : sata_nv
[ 24.209499] ata4: SATA link down (SStatus 0 SControl 300)
[ 24.213929] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 24.213938] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
[ 24.213944] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 24.213953] forcedeth: using HIGHDMA
[ 24.737629] eth0: forcedeth.c: subsystem: 0147b:1c05 bound to 0000:00:0a.0
[ 24.738164] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 24.738172] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 20
[ 24.738186] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.738189] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 24.738307] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 24.738323] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 24.799203] usb usb1: configuration #1 chosen from 1 choice
[ 24.799227] hub 1-0:1.0: USB hub found
[ 24.799234] hub 1-0:1.0: 10 ports detected
[ 24.905236] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[ 24.905253] NFORCE-CK804: chipset revision 242
[ 24.905255] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 24.905260] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[ 24.905267] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
[ 24.905275] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
[ 24.905281] Probing IDE interface ide0...
[ 25.196923] hda: Maxtor 4D040H2, ATA DISK drive
[ 25.208842] usb 1-6: new low speed USB device using ohci_hcd and address 2
[ 25.415779] usb 1-6: configuration #1 chosen from 1 choice
[ 25.437588] usbcore: registered new interface driver hiddev
[ 25.443772] input: Logitech USB Receiver as /class/input/input2
[ 25.443789] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6
[ 25.456749] input: Logitech USB Receiver as /class/input/input3
[ 25.456781] input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-6
[ 25.456788] usbcore: registered new interface driver usbhid
[ 25.456790] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 25.476765] hdb: WDC WD200BB-00AUA1, ATA DISK drive
[ 25.534762] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 25.570551] Probing IDE interface ide1...
[ 26.308195] hdc: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive
[ 27.091689] hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
[ 27.148236] hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
[ 27.148240] hdd: set_drive_speed_status: error=0x04 { AbortedCommand }
[ 27.148243] ide1: Drive 1 didn't accept speed setting. Oh, well.
[ 27.148271] ide1 at 0x170-0x177,0x376 on irq 15
[ 27.156332] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[ 27.156335] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
[ 27.156348] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 27.156351] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 27.156379] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 27.156404] ehci_hcd 0000:00:02.1: debug port 1
[ 27.156407] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 27.156412] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
[ 27.156417] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 27.156444] usb 1-6: USB disconnect, address 2
[ 27.156521] usb usb2: configuration #1 chosen from 1 choice
[ 27.156542] hub 2-0:1.0: USB hub found
[ 27.156552] hub 2-0:1.0: 10 ports detected
[ 27.161797] hda: max request size: 128KiB
[ 27.163499] hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[ 27.163506] hda: cache flushes not supported
[ 27.163548] hda: hda1 hda2 <ide-floppy driver 0.99.newide
[ 27.197258] hda5 >
[ 27.197372] hdb: max request size: 128KiB
[ 27.248328] hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
[ 27.248333] hdb: cache flushes not supported
[ 27.248359] hdb: hdb1
[ 27.276368] hdd: No disk in drive
[ 27.279511] hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
[ 27.285261] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 27.285268] Uniform CD-ROM driver Revision: 3.20
[ 27.779165] usb 1-6: new low speed USB device using ohci_hcd and address 3
[ 27.807144] Attempting manual resume
[ 27.807147] swsusp: Resume From Partition 3:5
[ 27.807149] PM: Checking swsusp image.
[ 27.807305] PM: Resume from disk failed.
[ 27.830727] kjournald starting. Commit interval 5 seconds
[ 27.830743] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.986059] usb 1-6: configuration #1 chosen from 1 choice
[ 28.007048] input: Logitech USB Receiver as /class/input/input4
[ 28.007066] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6
[ 28.020039] input: Logitech USB Receiver as /class/input/input5
[ 28.020066] input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-6
[ 38.989123] hdd: No disk in drive
[ 40.159407] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 40.164990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 40.461816] gameport: EMU10K1 is pci0000:01:06.1/gameport0, io 0xa800, speed 1199kHz
[ 40.491429] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 40.491460] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 40.567446] input: PC Speaker as /class/input/input6
[ 40.596546] NET: Registered protocol family 17
[ 40.621565] nvidia: module license 'NVIDIA' taints kernel.
[ 40.879740] usbcore: registered new interface driver xpad
[ 40.879744] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 40.893364] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 40.893377] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 40.893388] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 40.893545] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006
[ 40.979662] parport: PnPBIOS parport detected.
[ 40.979707] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 41.317354] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 41.499074] fuse init (API version 7.8)
[ 41.541673] lp0: using parport0 (interrupt-driven).
[ 41.586551] Adding 1686784k swap on /dev/disk/by-uuid/d23ad086-2809-4081-99cf-787ac376cad1. Priority:-1 extents:1 across:1686784k
[ 41.750708] EXT3 FS on hda1, internal journal
[ 42.142818] NET: Registered protocol family 10
[ 42.142910] lo: Disabled Privacy Extensions
[ 48.689230] input: Power Button (FF) as /class/input/input7
[ 48.689256] ACPI: Power Button (FF) [PWRF]
[ 48.689289] input: Power Button (CM) as /class/input/input8
[ 48.689304] ACPI: Power Button (CM) [PWRB]
[ 48.778281] ibm_acpi: ec object not found
[ 48.834260] No dock devices found.
[ 48.931530] Using specific hotkey driver
[ 48.979188] pcc_acpi: loading...
[ 49.194870] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
[ 49.194911] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8
[ 49.194915] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa
[ 49.194917] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc
[ 49.194919] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 54.014673] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 5:00.0] forgot to specify physical device; fix it!
[ 54.014723] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 5:00.0] forgot to specify physical device; fix it!
[ 54.014745] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 5:00.0] forgot to specify physical device; fix it!
[ 54.105624] ppdev: user-space parallel port driver
[ 54.652014] Bluetooth: Core ver 2.11
[ 54.652069] NET: Registered protocol family 31
[ 54.652071] Bluetooth: HCI device and connection manager initialized
[ 54.652074] Bluetooth: HCI socket layer initialized
[ 54.671214] Bluetooth: L2CAP ver 2.8
[ 54.671218] Bluetooth: L2CAP socket layer initialized
[ 54.681783] Bluetooth: RFCOMM socket layer initialized
[ 54.681797] Bluetooth: RFCOMM TTY layer initialized
[ 54.681799] Bluetooth: RFCOMM ver 1.8
[ 60.424010] eth0: no IPv6 routers present

          CPU0 CPU1
  0: 3071329 0 IO-APIC-edge timer
  1: 59821 0 IO-APIC-edge i8042
  6: 5 0 IO-APIC-edge floppy
  7: 0 0 IO-APIC-edge parport0
  8: 0 0 IO-APIC-edge rtc
  9: 0 0 IO-APIC-fasteoi acpi
 12: 4 0 IO-APIC-edge i8042
 14: 37130 0 IO-APIC-edge ide0
 15: 109712 0 IO-APIC-edge ide1
 18: 1051391 0 IO-APIC-fasteoi EMU10K1, nvidia
 20: 301486 0 IO-APIC-fasteoi ohci_hcd:usb1
 21: 1450203 0 IO-APIC-fasteoi eth0
 22: 0 0 IO-APIC-fasteoi libata
 23: 2 0 IO-APIC-fasteoi libata, ehci_hcd:usb2
NMI: 0 0
LOC: 3071354 3071331
ERR: 0

let me know what you guys think thanks.

[Launchpad Janitor (janitor)]

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this bug to the new "linux" package. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!

[Leann Ogasawara (leannogasawara)]

The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:

1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to install and test.

--or--

2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD.

Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.

[Michele Mangili (mangilimic)]

We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again!