0421:026a [Gigabyte Z77-DS3H] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c8c

[mak berlin]

some days before, my Nokia N97 mini was mounted correctly:
Mar 9 20:01:13 tux kernel: [ 176.527753] usb 3-2: Product: Nokia N97 mini
Mar 9 20:01:13 tux kernel: [ 176.527756] usb 3-2: Manufacturer: Nokia
Mar 9 20:01:13 tux kernel: [ 176.528749] scsi7 : usb-storage 3-2:1.0
Mar 9 20:01:13 tux mtp-probe: bus: 3, device: 2 was not an MTP device
Mar 9 20:01:14 tux kernel: [ 177.525725] scsi 7:0:0:0: Direct-Access Nokia Nokia N97 mini 1.0 PQ: 0 ANSI: 0
Mar 9 20:01:14 tux kernel: [ 177.526141] scsi 7:0:0:1: Direct-Access Nokia Nokia N97 mini 1.0 PQ: 0 ANSI: 0
Mar 9 20:01:14 tux kernel: [ 177.527476] sd 7:0:0:0: Attached scsi generic sg7 type 0
but now:Mar 13 19:28:30 tux kernel: [ 3240.800540] usb 3-1: new high-speed USB device number 10 using xhci_hcd
Mar 13 19:28:30 tux mtp-probe: checking bus 3, device 10: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1"
Mar 13 19:28:30 tux kernel: [ 3240.817192] usb 3-1: New USB device found, idVendor=0421, idProduct=026a
Mar 13 19:28:30 tux kernel: [ 3240.817197] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 13 19:28:30 tux kernel: [ 3240.817200] usb 3-1: Product: Nokia N97 mini
Mar 13 19:28:30 tux kernel: [ 3240.817202] usb 3-1: Manufacturer: Nokia
Mar 13 19:28:30 tux kernel: [ 3240.818133] scsi13 : usb-storage 3-1:1.0
Mar 13 19:28:30 tux mtp-probe: bus: 3, device: 10 was not an MTP device
Mar 13 19:28:32 tux kernel: [ 3241.926770] usb 3-1: reset high-speed USB device number 10 using xhci_hcd
Mar 13 19:28:32 tux kernel: [ 3241.942875] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c8c
Mar 13 19:28:32 tux kernel: [ 3241.942880] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c60
Mar 13 19:28:32 tux kernel: [ 3242.062530] usb 3-1: reset high-speed USB device number 10 using xhci_hcd
Mar 13 19:28:32 tux kernel: [ 3242.078643] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c8c
Mar 13 19:28:32 tux kernel: [ 3242.078648] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c60
Mar 13 19:28:32 tux kernel: [ 3242.198294] usb 3-1: reset high-speed USB device number 10 using xhci_hcd
Mar 13 19:28:32 tux kernel: [ 3242.214360] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c8c
Mar 13 19:28:32 tux kernel: [ 3242.214365] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c60
Mar 13 19:28:32 tux kernel: [ 3242.334050] usb 3-1: reset high-speed USB device number 10 using xhci_hcd
Mar 13 19:28:32 tux kernel: [ 3242.350163] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c8c
Mar 13 19:28:32 tux kernel: [ 3242.350168] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep eab59c60

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: linux-image-3.5.0-25-generic 3.5.0-25.39
ProcVersionSignature: Ubuntu 3.5.0-25.39-generic 3.5.7.4
Uname: Linux 3.5.0-25-generic i686
NonfreeKernelModules: fglrx
ApportVersion: 2.6.1-0ubuntu10
Architecture: i386
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC1: mak 2784 F.... pulseaudio
 /dev/snd/controlC2: mak 2784 F.... pulseaudio
 /dev/snd/controlC0: mak 2784 F.... pulseaudio
CRDA:
 country DE:
  (2400 - 2483 @ 40), (N/A, 20)
  (5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR
  (5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS
  (5470 - 5725 @ 40), (N/A, 26), DFS
Date: Wed Mar 13 19:31:05 2013
HibernationDevice: RESUME=UUID=c4c41874-0af0-4e79-b550-6e8898554f07
InstallationDate: Installed on 2012-08-26 (199 days ago)
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release i386 (20120817.3)
MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M.
MarkForUpload: True
ProcEnviron:
 TERM=xterm
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=<set>
 LANG=de_DE.UTF-8
 SHELL=/bin/bash
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-25-generic root=UUID=a7a0735e-326e-40f3-9c89-a77cf01a0f56 ro radeon.audio=1
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
 linux-restricted-modules-3.5.0-25-generic N/A
 linux-backports-modules-3.5.0-25-generic N/A
 linux-firmware 1.95
RfKill:
 0: phy0: Wireless LAN
  Soft blocked: no
  Hard blocked: no
SourcePackage: linux
UpgradeStatus: Upgraded to quantal on 2013-01-03 (68 days ago)
dmi.bios.date: 04/25/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: F4
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: Z77-DS3H
dmi.board.vendor: Gigabyte Technology Co., Ltd.
dmi.board.version: x.x
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF4:bd04/25/2012:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ77-DS3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: To be filled by O.E.M.
dmi.product.version: To be filled by O.E.M.
dmi.sys.vendor: Gigabyte Technology Co., Ltd.

[Brad Figg (brad-figg)]

This change was made by a bot.

[Joseph Salisbury (jsalisbury)]

Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.9 kernel[0] (Not a kernel in the daily directory) and install both the linux-image and linux-image-extra .deb packages.

If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as "Confirmed".

Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.9-rc2-raring/

[mak berlin (8-mak)]

hello joseph,
I cant't test the new kernel because after installing the latest gerneric kernel my compiz failed after login. Do you have any other idea to check the problem?
thanks
mak
==============
ProblemType: Package
DKMSBuildLog:
 DKMS make.log for fglrx-9.000 for kernel 3.9.0-030900rc2-generic (i686)
 Fr 15. Mär 18:32:15 CET 2013
 AMD kernel module generator version 2.1
 kernel includes at /lib/modules/3.9.0-030900rc2-generic/build/include not found or incomplete
 file: /lib/modules/3.9.0-030900rc2-generic/build/include/linux/version.h
DKMSKernelVersion: 3.9.0-030900rc2-generic
Date: Fri Mar 15 18:32:19 2013
DuplicateSignature:
 DKMS make.log for fglrx-9.000 for kernel 3.9.0-030900rc2-generic (i686)
 AMD kernel module generator version 2.1
 kernel includes at /lib/modules/3.9.0-030900rc2-generic/build/include not found or incomplete
 file: /lib/modules/3.9.0-030900rc2-generic/build/include/linux/version.h

FglrxBuildLog:
 AMD kernel module generator version 2.1
 .
 Active kernel:
 uname -a = Linux tux 3.5.0-25-generic #39-Ubuntu SMP Mon Feb 25 19:02:34 UTC 2013 i686 i686 i686 GNU/Linux
 uname -s = Linux
 uname -m = i686
 uname -r = 3.5.0-25-generic
 uname -v = #39-Ubuntu SMP Mon Feb 25 19:02:34 UTC 2013
 .
 Target kernel:
 uname -a = Linux tux 3.5.0-25-generic #39-Ubuntu SMP Mon Feb 25 19:02:34 UTC 2013 i686 i686 i686 GNU/Linux
 uname -s = Linux
 uname -m = i686
 uname -r = 3.9.0-030900rc2-generic
 uname -v = #39-Ubuntu SMP Mon Feb 25 19:02:34 UTC 2013
 .
 kernel includes at /lib/modules/3.9.0-030900rc2-generic/build/include not found or incomplete
 file: /lib/modules/3.9.0-030900rc2-generic/build/include/linux/version.h
Package: fglrx
PackageVersion: 2:9.000-0ubuntu3
SourcePackage: fglrx-installer
Title: fglrx 2:9.000-0ubuntu3: fglrx kernel module failed to build

[Launchpad Janitor (janitor)]

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]

[Jérôme Poulin (jeromepoulin)]

I have the same problem here with a Startech USB drive dock.

Description: Ubuntu 13.04

root@JeromeCauca:/sys/bus/pci/drivers/xhci_hcd# uname -a
Linux JeromeCauca.ad.cauca.ca 3.10.0-031000rc5-generic #201306082135 SMP Sun Jun 9 01:36:22 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

root@JeromeCauca:/sys/bus/pci/drivers/xhci_hcd# lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 004 Device 003: ID 152d:0551 JMicron Technology Corp. / JMicron USA Technology Corp.
...

root@JeromeCauca:/sys/bus/pci/drivers/xhci_hcd# lspci|grep USB
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
...

Jun 18 13:31:24 kernel: [143620.514573] scsi 8:0:0:0: Direct-Access WDC WD80 0AAJS-00WAA0 0000 PQ: 0 ANSI: 2 CCS
Jun 18 13:31:24 kernel: [143620.514880] sd 8:0:0:0: Attached scsi generic sg2 type 0
Jun 18 13:31:24 kernel: [143620.515094] sd 8:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Jun 18 13:31:24 kernel: [143620.515377] sd 8:0:0:0: [sdb] Write Protect is off
Jun 18 13:31:24 kernel: [143620.515381] sd 8:0:0:0: [sdb] Mode Sense: 28 00 00 00
Jun 18 13:31:24 kernel: [143620.515666] sd 8:0:0:0: [sdb] No Caching mode page present
Jun 18 13:31:24 kernel: [143620.515670] sd 8:0:0:0: [sdb] Assuming drive cache: write through
Jun 18 13:31:24 kernel: [143620.516965] sd 8:0:0:0: [sdb] No Caching mode page present
Jun 18 13:31:24 kernel: [143620.516968] sd 8:0:0:0: [sdb] Assuming drive cache: write through
Jun 18 13:31:29 kernel: [143626.209106] sdb:
Jun 18 13:31:29 kernel: [143626.210121] sd 8:0:0:0: [sdb] No Caching mode page present
Jun 18 13:31:29 kernel: [143626.210125] sd 8:0:0:0: [sdb] Assuming drive cache: write through
Jun 18 13:31:29 kernel: [143626.210128] sd 8:0:0:0: [sdb] Attached SCSI disk
Jun 18 13:32:00 kernel: [143657.260276] usb 4-3: Disable of device-initiated U1 failed.
Jun 18 13:32:00 kernel: [143657.263761] usb 4-3: Disable of device-initiated U2 failed.
Jun 18 13:32:01 kernel: [143657.633372] usb 4-3: reset SuperSpeed USB device number 2 using xhci_hcd
Jun 18 13:32:01 kernel: [143657.649978] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015d980d00
Jun 18 13:32:01 kernel: [143657.649982] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015d980d40
Jun 18 13:32:01 kernel: [143657.769465] usb 4-3: reset SuperSpeed USB device number 2 using xhci_hcd
Jun 18 13:32:01 kernel: [143657.785946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015d980d00
Jun 18 13:32:01 kernel: [143657.785950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015d980d40
Jun 18 13:32:09 kernel: [143665.311795] usb 4-3: reset SuperSpeed USB device number 2 using xhci_hcd
Ju...

[Jérôme Poulin (jeromepoulin)]

Stack dump when running ddrescue with this disk as source:
http://postimg.org/image/70fi6f39n/

Hand typed panic follows:
Null pointer dereference at 0x00000000
CPU: 1, PID: 0, Comm: swapper/1
RIP: xhci_stream_id_to_ring

Call Trace:
handle_set_deq_completion.isra
? handle_stopped_cmd_ring
handle_cmd_completion
xhci_handle_event
xhci_irq
xhci_msi_irq
handle_irq_event_percpu
handle_irq_event
handle_edge_irq
handle_irq
do_IRQ
common_interrupt
<EOI>
cpuidle_enter_state
cpuidle_enter_state
cpuidle_idle_call
arch_cpu_idle
cpu_idle_loop
cpu_startup_entry
start_secondary

CR2: 0x28

[richud (richud.com)]

03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

[ 264.896891] usb 10-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 264.914593] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 264.915843] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c8780
[ 264.915848] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c87c0
[ 325.664906] usb 10-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 325.682482] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 325.683732] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c8780
[ 325.683736] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c87c0
[ 360.552981] usb 10-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 360.570429] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 360.571678] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c8780
[ 360.571682] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c87c0
[ 385.976999] usb 10-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 385.994441] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 385.995689] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c8780
[ 385.995694] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c87c0
[ 882.192931] usb 10-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 882.210506] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 882.211753] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c8780
[ 882.211758] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c87c0
[ 917.476941] usb 10-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 917.494638] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 917.495886] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c8780
[ 917.495888] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c87c0
[ 917.696906] usb 10-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 917.714479] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 917.715731] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c8780
[ 917.715735] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022e2c87c0

[3DRaven (3draven)]

lsusb

Bus 001 Device 002: ID 041e:3f19 Creative Technology, Ltd
Bus 001 Device 003: ID 0bb4:0c03 HTC (High Tech Computer Corp.)
Bus 001 Device 004: ID 0bda:8723 Realtek Semiconductor Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 062a:3286 Creative Labs Nano Receiver [Sandstrom Laser Mouse SMWLL11]
Bus 004 Device 003: ID 5986:0319 Acer, Inc

lspci

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M] (rev ff)
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
05:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 0a)

dmesg

usb 1-2: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880221a2a9c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880221a2a980
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880221a2aa40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880221a2aa00
usb 1-2: reset full-speed USB device numbe...

[Abhishek (itzurabhi)]

[ 2122.170381] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2122.218959] usb 3-3: New USB device found, idVendor=1058, idProduct=0740
[ 2122.218964] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 2122.218967] usb 3-3: Product: My Passport 0740
[ 2122.218969] usb 3-3: Manufacturer: Western Digital
[ 2122.218971] usb 3-3: SerialNumber: 57583131453631434D363535
[ 2122.219908] scsi9 : usb-storage 3-3:1.0
[ 2144.070674] usb 3-3: reset high-speed USB device number 2 using xhci_hcd
[ 2144.118681] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f5d5c200
[ 2144.118687] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f5d5c240
[ 2154.230768] usb 3-3: reset high-speed USB device number 2 using xhci_hcd
[ 2154.278798] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f5d5c200
[ 2154.278804] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f5d5c240

Linux 3.5.0-43-generic #66~precise1-Ubuntu SMP Thu Oct 24 14:52:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

[penalvch (penalvch)]

mak berlin, as per http://www.gigabyte.us/products/product-page.aspx?pid=4147#bios an update is available for your BIOS (F9). If you update to this following https://help.ubuntu.com/community/BiosUpdate , does it change anything? If it doesn't, could you please both specify what happened, and just provide the output of the following terminal command:
sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date

Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful.

For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette .

Thank you for your understanding.

[Launchpad Janitor (janitor)]

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]