vbetool crashes error 6 on resume with nvidia

[Rob Caskey]

Binary package hint: vbetool

When I wake from suspend it juts sits at a black screen. Mouse moved ,and area under where the mouse starts has some graphical corruption, but other than that pure black and it stays stuck there.

Log is below. This is on a laptop with a 7600gt. I am using the restricted drivers module. Option "AddARGBGLXVisuals" "True" is in xorg.conf but compiz is disabled.

May 10 13:47:39 robertj-laptop gnome-power-manager: (robertj) Suspending computer because the DBUS method Suspend() was invoked
May 10 13:47:41 robertj-laptop kernel: [ 4040.231980] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 10 13:47:41 robertj-laptop kernel: [ 4040.487514] ACPI: PCI interrupt for device 0000:04:00.0 disabled
May 10 13:47:45 robertj-laptop kernel: [ 4042.748509] Disabling non-boot CPUs ...
May 10 13:47:45 robertj-laptop kernel: [ 4042.863337] CPU 1 is now offline
May 10 13:47:45 robertj-laptop kernel: [ 4042.863342] SMP alternatives: switching to UP code
May 10 18:19:30 robertj-laptop -- MARK --
May 10 18:19:30 robertj-laptop kernel: [ 4042.870139] CPU1 is down
May 10 18:19:30 robertj-laptop kernel: [ 4042.870142] Stopping tasks ... done.
May 10 18:19:30 robertj-laptop kernel: [ 4043.086935] Suspending console(s)
May 10 18:19:30 robertj-laptop kernel: [ 4046.004631] ACPI: PCI interrupt for device 0000:06:04.2 disabled
May 10 18:19:30 robertj-laptop kernel: [ 4046.017803] ohci1394 does not fully support suspend and resume yet
May 10 18:19:30 robertj-laptop kernel: [ 4046.037763] eth1: Going into suspend...
May 10 18:19:30 robertj-laptop kernel: [ 4046.148953] ACPI: PCI interrupt for device 0000:02:00.0 disabled
May 10 18:19:30 robertj-laptop kernel: [ 4046.161578] NVRM: RmPowerManagement: 3
May 10 18:19:30 robertj-laptop kernel: [ 4047.192118] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
May 10 18:19:30 robertj-laptop kernel: [ 4047.205133] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
May 10 18:19:30 robertj-laptop kernel: [ 4047.221004] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
May 10 18:19:30 robertj-laptop kernel: [ 4047.221041] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
May 10 18:19:30 robertj-laptop kernel: [ 4047.221078] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
May 10 18:19:30 robertj-laptop kernel: [ 4047.221114] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
May 10 18:19:30 robertj-laptop kernel: [ 4047.228952] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
May 10 18:19:30 robertj-laptop kernel: [ 0.717799] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
May 10 18:19:30 robertj-laptop kernel: [ 0.921854] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
May 10 18:19:30 robertj-laptop kernel: [ 0.921923] usb usb2: root hub lost power or was reset
May 10 18:19:30 robertj-laptop kernel: [ 0.921946] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
May 10 18:19:30 robertj-laptop kernel: [ 0.922013] usb usb3: root hub lost power or was reset
May 10 18:19:30 robertj-laptop kernel: [ 0.922036] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 10 18:19:30 robertj-laptop kernel: [ 0.922103] usb usb4: root hub lost power or was reset
May 10 18:19:30 robertj-laptop kernel: [ 0.922139] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
May 10 18:19:30 robertj-laptop kernel: [ 0.922205] usb usb5: root hub lost power or was reset
May 10 18:19:30 robertj-laptop kernel: [ 0.937603] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
May 10 18:19:30 robertj-laptop kernel: [ 0.953643] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
May 10 18:19:30 robertj-laptop kernel: [ 0.955653] NVRM: RmPowerManagement: 4
May 10 18:19:30 robertj-laptop kernel: [ 2.982707] eth1: Coming out of suspend...
May 10 18:19:30 robertj-laptop kernel: [ 2.996490] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
May 10 18:19:30 robertj-laptop kernel: [ 2.996502] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 10 18:19:30 robertj-laptop kernel: [ 3.065664] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fabff800-fabfffff] Max Packet=[2048] IR/IT contexts=[4/8]
May 10 18:19:30 robertj-laptop kernel: [ 3.084500] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 17
May 10 18:19:30 robertj-laptop kernel: [ 3.091741] pnp: Device 00:09 does not support activation.
May 10 18:19:30 robertj-laptop kernel: [ 3.091746] pnp: Device 00:0a does not support activation.
May 10 18:19:30 robertj-laptop kernel: [ 4.083092] ata1: soft resetting port
May 10 18:19:30 robertj-laptop kernel: [ 4.083206] ata2: soft resetting port
May 10 18:19:30 robertj-laptop kernel: [ 4.240445] Restarting tasks ... <6>usb 4-1: USB disconnect, address 2
May 10 18:19:30 robertj-laptop kernel: [ 4.244932] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
May 10 18:19:30 robertj-laptop kernel: [ 4.253219] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
May 10 18:19:30 robertj-laptop kernel: [ 4.253227] ata1.00: configured for UDMA/133
May 10 18:19:30 robertj-laptop kernel: [ 4.253232] ata1: EH complete
May 10 18:19:30 robertj-laptop kernel: [ 4.255786] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
May 10 18:19:30 robertj-laptop kernel: [ 4.257244] sda: Write Protect is off
May 10 18:19:30 robertj-laptop kernel: [ 4.259815] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 10 18:19:30 robertj-laptop kernel: [ 4.305722] done.
May 10 18:19:30 robertj-laptop kernel: [ 4.305744] Enabling non-boot CPUs ...
May 10 18:19:30 robertj-laptop kernel: [ 4.325877] SMP alternatives: switching to SMP code
May 10 18:19:30 robertj-laptop kernel: [ 4.326019] Booting processor 1/2 APIC 0x1
May 10 18:19:30 robertj-laptop kernel: [ 4.336682] Initializing CPU#1
May 10 18:19:30 robertj-laptop kernel: [ 4.415674] Calibrating delay using timer specific routine.. 3990.11 BogoMIPS (lpj=7980226)
May 10 18:19:30 robertj-laptop kernel: [ 4.415681] CPU: L1 I cache: 32K, L1 D cache: 32K
May 10 18:19:30 robertj-laptop kernel: [ 4.415683] CPU: L2 cache: 4096K
May 10 18:19:30 robertj-laptop kernel: [ 4.415685] CPU 1/1 -> Node 0
May 10 18:19:30 robertj-laptop kernel: [ 4.415687] CPU: Physical Processor ID: 0
May 10 18:19:30 robertj-laptop kernel: [ 4.415688] CPU: Processor Core ID: 1
May 10 18:19:30 robertj-laptop kernel: [ 4.416194] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
May 10 18:19:30 robertj-laptop kernel: [ 4.419671] CPU 1: Syncing TSC to CPU 0.
May 10 18:19:30 robertj-laptop kernel: [ 4.419848] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 948 cycles)
May 10 18:19:30 robertj-laptop kernel: [ 4.421775] CPU1 is up
May 10 18:19:30 robertj-laptop kernel: [ 4.451717] usb 4-2: USB disconnect, address 3
May 10 18:19:30 robertj-laptop gnome-power-manager: (robertj) DBUS timed out, but recovering
May 10 18:19:30 robertj-laptop gnome-power-manager: (robertj) Resuming computer
May 10 18:19:30 robertj-laptop kernel: [ 4.615585] usb 1-4: USB disconnect, address 2
May 10 18:19:30 robertj-laptop kernel: [ 4.640397] ata2.00: configured for UDMA/33
May 10 18:19:30 robertj-laptop kernel: [ 4.640406] ata2: EH complete
May 10 18:19:31 robertj-laptop kernel: [ 4.855440] usb 1-4: new high speed USB device using ehci_hcd and address 5
May 10 18:19:31 robertj-laptop kernel: [ 4.869318] vbetool[9958]: segfault at 000000000010ffef rip 00002aad81ee022f rsp 00007fff28fa7220 error 6
May 10 18:19:31 robertj-laptop kernel: [ 4.990117] usb 1-4: configuration #1 chosen from 1 choice
May 10 18:19:31 robertj-laptop kernel: [ 5.590372] usb 4-1: new low speed USB device using uhci_hcd and address 4
May 10 18:19:31 robertj-laptop kernel: [ 5.596979] vbetool[10014]: segfault at 000000000010ffef rip 00002b6854ff622f rsp 00007fff55f121b0 error 6
May 10 18:19:32 robertj-laptop kernel: [ 5.703452] r8169 Gigabit Ethernet driver 2.2LK loaded
May 10 18:19:32 robertj-laptop kernel: [ 5.703486] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
May 10 18:19:32 robertj-laptop kernel: [ 5.703907] eth0: RTL8168b/8111b at 0xffffc2000007e000, 00:16:d4:51:53:54, IRQ 18
May 10 18:19:32 robertj-laptop kernel: [ 5.733659] r8169: eth0: link down
May 10 18:19:32 robertj-laptop kernel: [ 5.733692] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 10 18:19:32 robertj-laptop kernel: [ 5.754529] usb 4-1: configuration #1 chosen from 1 choice
May 10 18:19:32 robertj-laptop kernel: [ 5.770497] input: Microsoft Basic Optical Mouse as /class/input/input7
May 10 18:19:32 robertj-laptop kernel: [ 5.770544] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-1
May 10 18:19:32 robertj-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
May 10 18:19:32 robertj-laptop kernel: [ 6.047261] usb 4-2: new full speed USB device using uhci_hcd and address 5
May 10 18:19:32 robertj-laptop kernel: [ 6.214226] usb 4-2: configuration #1 chosen from 1 choice
May 10 18:19:29 robertj-laptop kernel: [ 6.747931] vbetool[10126]: segfault at 000000000010ffef rip 00002b8e94bbb22f rsp 00007fff1634a600 error 6
May 10 18:19:29 robertj-laptop kernel: [ 6.838467] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 10 18:19:30 robertj-laptop kernel: [ 8.333008] input: Power Button (FF) as /class/input/input8
May 10 18:19:30 robertj-laptop kernel: [ 8.333347] ACPI: Power Button (FF) [PWRF]
May 10 18:19:30 robertj-laptop kernel: [ 8.334194] input: Lid Switch as /class/input/input9
May 10 18:19:30 robertj-laptop kernel: [ 8.334441] ACPI: Lid Switch [LID0]
May 10 18:19:30 robertj-laptop kernel: [ 8.337005] input: Power Button (CM) as /class/input/input10
May 10 18:19:30 robertj-laptop kernel: [ 8.337283] ACPI: Power Button (CM) [PWRB]
May 10 18:19:31 robertj-laptop kernel: [ 8.538305] ACPI: AC Adapter [ACAD] (on-line)
May 10 18:19:31 robertj-laptop kernel: [ 8.627408] ACPI: Battery Slot [BAT1] (battery present)

[Rob Caskey (rcaskey)]

Update, turns out compiz is enabled, but err...it would still be good to have this working.

[Sitsofe Wheeler (sitsofe)]

Thank you for your bug report.

This sounds like Bug #96240 ...