Bug #111486 “[Feisty] no sound with hda-intel” : Bugs : linux-source-2.6.20 package : Ubuntu

Revision history for this message

pentacle (p3ntacl3) wrote on 2007-05-01:

#1

Download full text (6.3 KiB)

tail -2 /proc/asound/oss/sndstat

Mixers: NOT ENABLED IN CONFIG

---------------

amixer output

Simple mixer control 'Headphone',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 56 [88%] [-8.00dB] [on]
  Front Right: Playback 56 [88%] [-8.00dB] [on]
Simple mixer control 'Front Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 27 [87%] [6.00dB] [on]
  Front Right: Playback 27 [87%] [6.00dB] [on]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [12.00dB] [on]
  Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 27 [87%] [6.00dB] [on]
  Front Right: Playback 27 [87%] [6.00dB] [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [12.00dB] [on]
  Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 28 [90%] [28.50dB] [on]
  Front Right: Capture 28 [90%] [28.50dB] [on]
Simple mixer control 'Input Source',0
  Capabilities: enum
  Items: 'Mic' 'Front Mic' 'Line' 'CD'
  Item0: 'Line'

---------------

lspci -nv output

00:00.0 0600: 8086:2770 (rev 02)
        Subsystem: 1695:4019
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>

00:1b.0 0403: 8086:27d8 (rev 01)
        Subsystem: 1695:4019
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at d0100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: b0000000-cfffffff
        Prefetchable memory behind bridge: 0000000020000000-00000000200fffff
        Capabilities: <access denied>

00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at e300 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at e000 [size=32]

00:1d.2 0c03: 8086:27ca...

tail -2 /proc/asound/oss/sndstat

Mixers: NOT ENABLED IN CONFIG

---------------

amixer output

Simple mixer control 'Headphone',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 56 [88%] [-8.00dB] [on]
  Front Right: Playback 56 [88%] [-8.00dB] [on]
Simple mixer control 'Front Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 27 [87%] [6.00dB] [on]
  Front Right: Playback 27 [87%] [6.00dB] [on]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [12.00dB] [on]
  Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 27 [87%] [6.00dB] [on]
  Front Right: Playback 27 [87%] [6.00dB] [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [12.00dB] [on]
  Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 28 [90%] [28.50dB] [on]
  Front Right: Capture 28 [90%] [28.50dB] [on]
Simple mixer control 'Input Source',0
  Capabilities: enum
  Items: 'Mic' 'Front Mic' 'Line' 'CD'
  Item0: 'Line'

---------------

lspci -nv output

00:00.0 0600: 8086:2770 (rev 02)
        Subsystem: 1695:4019
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>

00:1b.0 0403: 8086:27d8 (rev 01)
        Subsystem: 1695:4019
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at d0100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: b0000000-cfffffff
        Prefetchable memory behind bridge: 0000000020000000-00000000200fffff
        Capabilities: <access denied>

00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at e300 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at e000 [size=32]

00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at e100 [size=32]

00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at e200 [size=32]

00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI])
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0, IRQ 17
        Memory at d0104000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 0604: 8086:244e (rev e1) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: d0000000-d00fffff
        Prefetchable memory behind bridge: 0000000020100000-00000000201fffff
        Capabilities: <access denied>

00:1f.0 0601: 8086:27b8 (rev 01)
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>

00:1f.1 0101: 8086:27df (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: 1695:4019
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at f000 [size=16]

00:1f.2 0101: 8086:27c0 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1695:4019
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
        I/O ports at e400 [size=8]
        I/O ports at e500 [size=4]
        I/O ports at e600 [size=8]
        I/O ports at e700 [size=4]
        I/O ports at e800 [size=16]
        Memory at d0105000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1f.3 0c05: 8086:27da (rev 01)
        Subsystem: 1695:4019
        Flags: medium devsel, IRQ 11
        I/O ports at 0500 [size=32]

01:00.0 0300: 1002:7142 (prog-if 00 [VGA])
        Subsystem: 1043:0142
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at b0000000 (64-bit, prefetchable) [size=256M]
        Memory at c0030000 (64-bit, non-prefetchable) [size=64K]
        I/O ports at c000 [size=256]
        [virtual] Expansion ROM at 20000000 [disabled] [size=128K]
        Capabilities: <access denied>

01:00.1 0380: 1002:7162
        Subsystem: 1043:0143
        Flags: bus master, fast devsel, latency 0
        Memory at c0020000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>

02:02.0 0200: 10ec:8139 (rev 10)
        Subsystem: 1695:9001
        Flags: bus master, medium devsel, latency 32, IRQ 20
        I/O ports at d000 [size=256]
        Memory at d0010000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at 20100000 [disabled] [size=64K]
        Capabilities: <access denied>

---------------
asoundconf list output

Names of available sound cards:
Intel

---------------
 cat /etc/asound.conf ~/.asoundrc* output:

cat: /etc/asound.conf: No such file or directory
cat: /home/ercan/.asoundrc*: No such file or directory

Revision history for this message

pentacle (p3ntacl3) wrote on 2007-05-01:

#2

Download full text (25.8 KiB)

dmesg output;

d: 000000001fee0000 type: 2
[ 0.000000] copy_e820_map() start: 000000001fee0000 size: 0000000000003000 end: 000000001fee3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fee3000 size: 000000000000d000 end: 000000001fef0000 type: 3
[ 0.000000] copy_e820_map() start: 000000001fef0000 size: 0000000000010000 end: 000000001ff00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fedf800 (usable)
[ 0.000000] BIOS-e820: 000000001fedf800 - 000000001fee0000 (reserved)
[ 0.000000] BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5230
[ 0.000000] Entering add_active_range(0, 0, 130783) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130783
[ 0.000000] HighMem 130783 -> 130783
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130783
[ 0.000000] On node 0 totalpages: 130783
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125698 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 IntelR ) @ 0x000f9230
[ 0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee3040
[ 0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee30c0
[ 0.000000] ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee79c0
[ 0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee78c0
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x1fee7a40
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0x1fee7ed0
[ 0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:6 AP...

dmesg output;

d: 000000001fee0000 type: 2
[    0.000000] copy_e820_map() start: 000000001fee0000 size: 0000000000003000 end: 000000001fee3000 type: 4
[    0.000000] copy_e820_map() start: 000000001fee3000 size: 000000000000d000 end: 000000001fef0000 type: 3
[    0.000000] copy_e820_map() start: 000000001fef0000 size: 0000000000010000 end: 000000001ff00000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fedf800 (usable)
[    0.000000]  BIOS-e820: 000000001fedf800 - 000000001fee0000 (reserved)
[    0.000000]  BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 510MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5230
[    0.000000] Entering add_active_range(0, 0, 130783) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   130783
[    0.000000]   HighMem    130783 ->   130783
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   130783
[    0.000000] On node 0 totalpages: 130783
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 989 pages used for memmap
[    0.000000]   Normal zone: 125698 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP (v000 IntelR                                ) @ 0x000f9230
[    0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee3040
[    0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee30c0
[    0.000000] ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee79c0
[    0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee78c0
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x1fee7a40
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20040311) @ 0x1fee7ed0
[    0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:6 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:6 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:c0100000)
[    0.000000] Detected 2800.237 MHz processor.
[   19.050028] Built 1 zonelists.  Total pages: 129762
[   19.050032] Kernel command line: root=UUID=c772420a-98ce-40f4-a325-3c6ff82497f5 ro quiet splash
[   19.050193] mapped APIC to ffffd000 (fee00000)
[   19.050196] mapped IOAPIC to ffffc000 (fec00000)
[   19.050199] Enabling fast FPU save and restore... done.
[   19.050202] Enabling unmasked SIMD FPU exception support... done.
[   19.050211] Initializing CPU#0
[   19.050271] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   19.051997] Console: colour VGA+ 80x25
[   19.052150] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   19.052319] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   19.059629] Memory: 507328k/523132k available (1992k kernel code, 15224k reserved, 893k data, 328k init, 0k highmem)
[   19.059640] virtual kernel memory layout:
[   19.059641]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   19.059642]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   19.059643]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   19.059644]     lowmem  : 0xc0000000 - 0xdfedf000   ( 510 MB)
[   19.059645]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   19.059646]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   19.059647]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   19.059651] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   19.138110] Calibrating delay using timer specific routine.. 5605.43 BogoMIPS (lpj=11210872)
[   19.138151] Security Framework v1.0.0 initialized
[   19.138155] SELinux:  Disabled at boot.
[   19.138172] Mount-cache hash table entries: 512
[   19.138303] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
[   19.138312] monitor/mwait feature present.
[   19.138315] using mwait in idle threads.
[   19.138321] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   19.138324] CPU: L2 cache: 2048K
[   19.138327] CPU: Physical Processor ID: 0
[   19.138329] CPU: Processor Core ID: 0
[   19.138331] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000e49d 00000000 00000001
[   19.138341] Compat vDSO mapped to ffffe000.
[   19.138344] Remapping vsyscall page to ffffe000
[   19.138360] Checking 'hlt' instruction... OK.
[   19.154184] SMP alternatives: switching to UP code
[   19.154518] Early unpacking initramfs... done
[   19.452798] ACPI: Core revision 20060707
[   19.458664] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   19.467997] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
[   19.468021] SMP alternatives: switching to SMP code
[   19.468114] Booting processor 1/1 eip 3000
[   19.478672] Initializing CPU#1
[   19.557311] Calibrating delay using timer specific routine.. 5600.50 BogoMIPS (lpj=11201017)
[   19.557321] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
[   19.557327] monitor/mwait feature present.
[   19.557332] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   19.557335] CPU: L2 cache: 2048K
[   19.557337] CPU: Physical Processor ID: 0
[   19.557339] CPU: Processor Core ID: 1
[   19.557341] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000e49d 00000000 00000001
[   19.557796] CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
[   19.557832] Total of 2 processors activated (11205.94 BogoMIPS).
[   19.557980] ENABLING IO-APIC IRQs
[   19.558158] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   19.705038] checking TSC synchronization across 2 CPUs: passed.
[    0.003997] Brought up 2 CPUs
[    0.138696] migration_cost=1647
[    0.138991] Booting paravirtualized kernel on bare hardware
[    0.139068] Time: 15:20:28  Date: 04/01/107
[    0.139100] NET: Registered protocol family 16
[    0.139190] EISA bus registered
[    0.139196] ACPI: bus type pci registered
[    0.163853] PCI: PCI BIOS revision 3.00 entry at 0xfb4b0, last bus=2
[    0.163855] PCI: Using configuration type 1
[    0.163857] Setting up standard PCI resources
[    0.185922] ACPI: Interpreter enabled
[    0.185928] ACPI: Using IOAPIC for interrupt routing
[    0.186633] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.186638] PCI: Probing PCI hardware (bus 00)
[    0.187364] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.187369] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.187646] Boot video device is 0000:01:00.0
[    0.187905] PCI: Transparent bridge - 0000:00:1e.0
[    0.187946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.199149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.200121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.204338] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.204640] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.204943] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.205243] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.205542] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.205844] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.206142] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.206443] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.206765] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.206778] pnp: PnP ACPI init
[    0.211028] pnp: PnP ACPI: found 15 devices
[    0.211034] PnPBIOS: Disabled by ACPI PNP
[    0.211094] PCI: Using ACPI for IRQ routing
[    0.211098] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.227856] NET: Registered protocol family 8
[    0.227859] NET: Registered protocol family 20
[    0.228219] pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved
[    0.228676] PCI: Bridge: 0000:00:1c.0
[    0.228681]   IO window: c000-cfff
[    0.228688]   MEM window: b0000000-cfffffff
[    0.228693]   PREFETCH window: 20000000-200fffff
[    0.228700] PCI: Bridge: 0000:00:1e.0
[    0.228703]   IO window: d000-dfff
[    0.228709]   MEM window: d0000000-d00fffff
[    0.228714]   PREFETCH window: 20100000-201fffff
[    0.228742] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.228754] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.228766] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.228801] NET: Registered protocol family 2
[    0.272117] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.272208] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.272288] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.272329] TCP: Hash tables configured (established 16384 bind 8192)
[    0.272332] TCP reno registered
[    0.284193] checking if image is initramfs... it is
[    0.872474] Freeing initrd memory: 7007k freed
[    0.873153] audit: initializing netlink socket (disabled)
[    0.873168] audit(1178032828.608:1): initialized
[    0.873454] VFS: Disk quotas dquot_6.5.1
[    0.873487] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.873558] io scheduler noop registered
[    0.873562] io scheduler anticipatory registered
[    0.873565] io scheduler deadline registered
[    0.873602] io scheduler cfq registered (default)
[    0.873820] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.873867] assign_interrupt_mode Found MSI capability
[    0.873871] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.873910] Allocate Port Service[0000:00:1c.0:pcie02]
[    0.874090] isapnp: Scanning for PnP cards...
[    1.225144] isapnp: No Plug & Play device found
[    1.252878] Real Time Clock Driver v1.12ac
[    1.252936] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.253061] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.253732] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.254015] mice: PS/2 mouse device common for all mice
[    1.254648] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.254889] input: Macintosh mouse button emulation as /class/input/input0
[    1.254930] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.254935] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.255146] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.257743] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.257748] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.257878] EISA: Probing bus 0 at eisa.0
[    1.257911] EISA: Detected 0 cards.
[    1.287946] TCP cubic registered
[    1.287966] NET: Registered protocol family 1
[    1.287998] Starting balanced_irq
[    1.288005] Using IPI No-Shortcut mode
[    1.288099] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.288103] ACPI: (supports S0 S1 S4 S5)
[    1.288160]   Magic number: 7:927:334
[    1.288251]   hash matches device tty55
[    1.288429] Freeing unused kernel memory: 328k freed
[    1.289540] Time: tsc clocksource has been installed.
[    2.510639] Capability LSM initialized
[    2.545658] ACPI: Fan [FAN] (on)
[    2.550086] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[    2.550141] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    2.550149] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    2.551583] ACPI: Thermal Zone [THRM] (33 C)
[    2.918625] usbcore: registered new interface driver usbfs
[    2.918652] usbcore: registered new interface driver hub
[    2.921702] usbcore: registered new device driver usb
[    2.922646] USB Universal Host Controller Interface driver v3.0
[    2.922694] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[    2.922706] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    2.922711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.922835] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    2.922866] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e300
[    2.922977] usb usb1: configuration #1 chosen from 1 choice
[    2.923009] hub 1-0:1.0: USB hub found
[    2.923017] hub 1-0:1.0: 2 ports detected
[    2.935825] SCSI subsystem initialized
[    2.941329] libata version 2.20 loaded.
[    3.028318] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[    3.028332] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.028336] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.028364] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.028394] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e000
[    3.028494] usb usb2: configuration #1 chosen from 1 choice
[    3.028522] hub 2-0:1.0: USB hub found
[    3.028529] hub 2-0:1.0: 2 ports detected
[    3.042593] 8139too Fast Ethernet driver 0.9.28
[    3.045437] Floppy drive(s): fd0 is 1.44M
[    3.063402] FDC 0 is a post-1991 82077
[    3.132143] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[    3.132156] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.132161] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.132189] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.132219] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e100
[    3.132311] usb usb3: configuration #1 chosen from 1 choice
[    3.132341] hub 3-0:1.0: USB hub found
[    3.132347] hub 3-0:1.0: 2 ports detected
[    3.235944] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    3.235957] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.235961] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.235987] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.236014] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[    3.236102] usb usb4: configuration #1 chosen from 1 choice
[    3.236131] hub 4-0:1.0: USB hub found
[    3.236137] hub 4-0:1.0: 2 ports detected
[    3.267801] usb 1-2: new full speed USB device using uhci_hcd and address 2
[    3.339838] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[    3.340026] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.340031] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.340072] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.340107] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[    3.340114] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xd0104000
[    3.343988] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.344084] usb usb5: configuration #1 chosen from 1 choice
[    3.344118] hub 5-0:1.0: USB hub found
[    3.344126] hub 5-0:1.0: 8 ports detected
[    3.447273] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 20
[    3.447775] eth0: RealTek RTL8139 at 0xe086c000, 00:04:61:4c:24:0c, IRQ 20
[    3.447778] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    3.449364] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    3.451407] ata_piix 0000:00:1f.1: version 2.10ac1
[    3.451423] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[    3.451443] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    3.451886] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[    3.451916] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[    3.451936] scsi0 : ata_piix
[    3.898851] usb 5-7: new high speed USB device using ehci_hcd and address 3
[    3.934471] ata1.00: ATAPI, max UDMA/33
[    3.934475] ata1.01: ATAPI, max UDMA/33
[    4.031768] usb 5-7: configuration #1 chosen from 1 choice
[    4.098832] ata1.00: configured for UDMA/33
[    4.270305] usb 1-2: new full speed USB device using uhci_hcd and address 3
[    4.282552] ata1.01: configured for UDMA/33
[    4.282565] scsi1 : ata_piix
[    4.282647] ata2: port disabled. ignoring.
[    4.287876] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4081B A100 PQ: 0 ANSI: 5
[    4.288261] scsi 0:0:1:0: CD-ROM            HL-DT-ST CD-RW GCE-8527B  1.01 PQ: 0 ANSI: 5
[    4.288669] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    4.288695] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[    4.288714] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.288752] ata3: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e502 bmdma 0x0001e800 irq 18
[    4.288787] ata4: SATA max UDMA/133 cmd 0x0001e600 ctl 0x0001e702 bmdma 0x0001e808 irq 18
[    4.288798] scsi2 : ata_piix
[    4.458983] usb 1-2: configuration #1 chosen from 1 choice
[    4.462173] usbcore: registered new interface driver libusual
[    4.466541] Initializing USB Mass Storage driver...
[    4.466599] scsi4 : SCSI emulation for USB Mass Storage devices
[    4.466647] usb-storage: device found at 3
[    4.466650] usb-storage: waiting for device to settle before scanning
[    4.466663] usbcore: registered new interface driver usb-storage
[    4.466665] USB Mass Storage support registered.
[    4.490761] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[    4.490770] ata3.00: ATA-7: ST3250820AS, 3.AAD, max UDMA/133
[    4.490774] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.557267] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[    4.557272] ata3.00: configured for UDMA/133
[    4.557282] scsi3 : ata_piix
[    4.723008] ATA: abnormal status 0x7F on port 0x0001e607
[    4.723138] scsi 2:0:0:0: Direct-Access     ATA      ST3250820AS      3.AA PQ: 0 ANSI: 5
[    4.756213] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.756219] Uniform CD-ROM driver Revision: 3.20
[    4.756383] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.758098] sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[    4.758245] sr 0:0:1:0: Attached scsi CD-ROM sr1
[    4.758615] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[    4.758630] sda: Write Protect is off
[    4.758633] sda: Mode Sense: 00 3a 00 00
[    4.758654] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.758700] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[    4.758713] sda: Write Protect is off
[    4.758716] sda: Mode Sense: 00 3a 00 00
[    4.758737] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.758740]  sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[    4.762402] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    4.762428] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    4.779781]  sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    4.846539] sd 2:0:0:0: Attached scsi disk sda
[    5.247251] Attempting manual resume
[    5.247255] swsusp: Resume From Partition 8:7
[    5.247257] PM: Checking swsusp image.
[    5.247420] PM: Resume from disk failed.
[    5.275771] kjournald starting.  Commit interval 5 seconds
[    5.275788] EXT3-fs: mounted filesystem with ordered data mode.
[    9.456868] usb-storage: device scan complete
[    9.457338] scsi 4:0:0:0: Direct-Access     SONY     NWWM MEM AAD2    1.00 PQ: 0 ANSI: 0 CCS
[    9.458606] sd 4:0:0:0: Attached scsi removable disk sdb
[    9.458654] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   12.386004] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   13.289632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   13.292382] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.358191] iTCO_vendor_support: vendor-support=0
[   13.359202] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   13.359279] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[   13.359312] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.576032] input: PC Speaker as /class/input/input2
[   13.592005] Linux agpgart interface v0.102 (c) Dave Jones
[   13.593850] agpgart: Detected an Intel 945G Chipset.
[   13.611685] agpgart: AGP aperture is 256M @ 0x0
[   13.678828] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   13.678850] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   13.715758] parport: PnPBIOS parport detected.
[   13.715815] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   13.738779] intel_rng: FWH not detected
[   13.751066] NET: Registered protocol family 17
[   13.770058] Bluetooth: Core ver 2.11
[   13.770131] NET: Registered protocol family 31
[   13.770134] Bluetooth: HCI device and connection manager initialized
[   13.770137] Bluetooth: HCI socket layer initialized
[   13.785592] Bluetooth: HCI USB driver ver 2.9
[   13.886560] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
[   13.889754] usbcore: registered new interface driver hci_usb
[   14.247842] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[   14.387569] fuse init (API version 7.8)
[   14.404181] lp0: using parport0 (interrupt-driven).
[   14.441224] Adding 530104k swap on /dev/disk/by-uuid/ede6d5c0-8a0d-4a0c-9248-a956c7186817.  Priority:-1 extents:1 across:530104k
[   14.628088] EXT3 FS on sda8, internal journal
[   14.946489] kjournald starting.  Commit interval 5 seconds
[   14.946629] EXT3 FS on sda10, internal journal
[   14.946636] EXT3-fs: mounted filesystem with ordered data mode.
[   14.956822] kjournald starting.  Commit interval 5 seconds
[   14.956957] EXT3 FS on sda9, internal journal
[   14.956962] EXT3-fs: mounted filesystem with ordered data mode.
[   16.801787] NET: Registered protocol family 10
[   16.801886] lo: Disabled Privacy Extensions
[   20.505227] Using specific hotkey driver
[   20.629819] input: Power Button (FF) as /class/input/input4
[   20.629976] ACPI: Power Button (FF) [PWRF]
[   20.630750] input: Power Button (CM) as /class/input/input5
[   20.630891] ACPI: Power Button (CM) [PWRB]
[   20.641391] ibm_acpi: ec object not found
[   20.688233] No dock devices found.
[   20.766081] pcc_acpi: loading...
[   25.946350] SCSI device sdb: 247169 2048-byte hdwr sectors (506 MB)
[   25.950341] sdb: Write Protect is off
[   25.950347] sdb: Mode Sense: 00 6a 00 00
[   25.950353] sdb: assuming drive cache: write through
[   25.958337] SCSI device sdb: 247169 2048-byte hdwr sectors (506 MB)
[   25.962327] sdb: Write Protect is off
[   25.962332] sdb: Mode Sense: 00 6a 00 00
[   25.962335] sdb: assuming drive cache: write through
[   25.962339]  sdb: sdb1
[   26.483231] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   26.489024] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[   26.489220] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[   26.513777] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   26.670780] ppdev: user-space parallel port driver
[   27.211767] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   27.211773] apm: disabled - APM is not SMP safe.
[   27.446359] Bluetooth: L2CAP ver 2.8
[   27.446364] Bluetooth: L2CAP socket layer initialized
[   27.582378] Bluetooth: RFCOMM socket layer initialized
[   27.582390] Bluetooth: RFCOMM TTY layer initialized
[   27.582392] Bluetooth: RFCOMM ver 1.8
[   28.404002] [fglrx] total      GART = 130023424
[   28.404011] [fglrx] free       GART = 114032640
[   28.404013] [fglrx] max single GART = 114032640
[   28.404018] [fglrx] total      LFB  = 268304384
[   28.404020] [fglrx] free       LFB  = 243060736
[   28.404023] [fglrx] max single LFB  = 243060736
[   28.404025] [fglrx] total      Inv  = 0
[   28.404027] [fglrx] free       Inv  = 0
[   28.404028] [fglrx] max single Inv  = 0
[   28.404030] [fglrx] total      TIM  = 0
[   42.260365] eth0: no IPv6 routers present
[   48.793199] cdrom: sr1: mrw address space DMA selected
[   48.925300] cdrom: sr1: mrw address space DMA selected
[   49.639879] ISO 9660 Extensions: Microsoft Joliet Level 3
[   49.663772] ISOFS: changing to secondary root

Revision history for this message

pentacle (p3ntacl3) wrote on 2007-05-01:

#3

cat /proc/interrupts output:

           CPU0 CPU1
  0: 606058 0 IO-APIC-edge timer
  1: 5186 0 IO-APIC-edge i8042
  6: 4 0 IO-APIC-edge floppy
  7: 0 0 IO-APIC-edge parport0
  8: 3 0 IO-APIC-edge rtc
  9: 1 0 IO-APIC-fasteoi acpi
12: 182012 0 IO-APIC-edge i8042
14: 40152 0 IO-APIC-edge libata
15: 0 0 IO-APIC-edge libata
16: 183657 0 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel, fglrx
17: 244795 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
18: 22811 0 IO-APIC-fasteoi uhci_hcd:usb2, libata
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
20: 5374 0 IO-APIC-fasteoi eth0
NMI: 0 0
LOC: 605795 605884
ERR: 0
MIS: 0

Revision history for this message

pentacle (p3ntacl3) wrote on 2007-05-01:

#4

and if it helps, audio debug from a script.

ALSA Audio Debug v0.1.0 - Sal May 1 16:02:33 EEST 2007
http://alsa.opensrc.org/aadebug
http://www.gnu.org/licenses/gpl.txt

Kernel ----------------------------------------------------
Linux ubuntu 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux

Loaded Modules --------------------------------------------
snd_hda_intel 22552 1
snd_hda_codec 213376 1 snd_hda_intel
snd_pcm 81028 2 snd_hda_intel,snd_hda_codec
snd_timer 24196 1 snd_pcm
snd 56324 6 snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
snd_page_alloc 11272 2 snd_hda_intel,snd_pcm

Modprobe Conf ---------------------------------------------
Warning: module config file does not exist
This means any kernel modules will not be auto loaded
See your linux distro docs on how to create this file

Proc Asound -----------------------------------------------
cat: /proc/asound/{version,cards,devices,hwdep,pcm,seq/clients}: No such file or directory

Dev Snd ---------------------------------------------------
controlC0 pcmC0D0c pcmC0D0p timer

CPU -------------------------------------------------------
model name : Intel(R) Pentium(R) D CPU 2.80GHz
cpu MHz : 2400.000
model name : Intel(R) Pentium(R) D CPU 2.80GHz
cpu MHz : 2400.000

RAM -------------------------------------------------------
MemTotal: 514856 kB
SwapTotal: 530104 kB

Hardware --------------------------------------------------
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)

Revision history for this message

pentacle (p3ntacl3) wrote on 2007-05-01:

#5

Well. I think i solved the problem. Added the below line to the end of /etc/modprobe.d/alsa-base file. After reboot the sound seems OK.

options snd-hda-intel model=3stack

Changed in linux-source-2.6.20:
status:	Confirmed → Fix Committed

Revision history for this message

Guillaume Duveau (guix) wrote on 2007-06-16:

#6

I had to add the same line on my Thinkpad Z60t.
This bug shouldn't be marked as fixed until this line is automatically added at Ubuntu installation so I re-open it.

Revision history for this message

Guillaume Duveau (guix) wrote on 2007-06-16:

#7

Well "bug committed" is in fact all right, sorry !

Revision history for this message

Brian Murray (brian-murray) wrote on 2007-08-29:

#8

Thank you for taking the time to report this bug and helping to make Ubuntu better. This bug does not meet the criteria for a stable release update and is being marked as Won't Fix for this particular version of the kernel. You can learn more about the stable release update process at https://wiki.ubuntu.com/StableReleaseUpdates .
However, the issue that you reported is one that should be possible to test with the live environment of the Desktop CD of the development release - Gutsy Gibbon. It would help us greatly if you could test with it so we can work on getting it fixed in the actively developed kernel. You can find out more about the development release at http://www.ubuntu.com/testing/ .
If you do decide to test with the development release of Ubuntu please comment on this bug report and include at least the minimal information requested at http://wiki.ubuntu.com/KernelTeamBugPolicies . Thanks again and we appreciate your help.

Changed in linux-source-2.6.20:
assignee:	ubuntu-audio → brian-murray
status:	Fix Committed → Won't Fix

Ubuntu
linux-source-2.6.20 package

[Feisty] no sound with hda-intel

Bug Description

Other bug subscribers

Remote bug watches

Ubuntulinux-source-2.6.20 package

[Feisty] no sound with hda-intel

Bug Description

Other bug subscribers

Remote bug watches

Ubuntu
linux-source-2.6.20 package