audio is not working correctly - all I am getting when I play any sound is feedback - Intel82801G - was working fine under Edgy (6.10)
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
Ubuntu |
New
|
Undecided
|
Unassigned |
Bug Description
Here is the output of the test programs I have run. After installing Feisty, I am just getting a high-pitch sound (sort of like having feedback) out of my audio card when it used to work fine under edgy. This is on all channels.
soundstat
Mixers:
0: Realtek ALC861
amixer
Simple mixer control 'Master',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front Mic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Line',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'CD',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 23
Mono: Capture [on]
Front Left: Playback 23 [100%] [33.00dB] [on]
Front Right: Playback 23 [100%] [33.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 13
Front Left: Capture 0 [0%] [-6.00dB] [on]
Front Right: Capture 0 [0%] [-6.00dB] [on]
Simple mixer control 'Mixer',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Caller ID',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Off-hook',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
lspci
00:00.0 0600: 8086:27a0 (rev 03)
Subsystem: 1179:ff10
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA])
Subsystem: 1179:ff10
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at dc100000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 1800 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dc200000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
00:02.1 0380: 8086:27a6 (rev 03)
Subsystem: 1179:ff10
Flags: bus master, fast devsel, latency 0
Memory at dc180000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 0403: 8086:27d8 (rev 02)
Subsystem: 1179:ff10
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at dc240000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000d200000
Capabilities: <access denied>
00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: 00000000d400000
Capabilities: <access denied>
00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 1820 [size=32]
00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1840 [size=32]
00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1860 [size=32]
00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1880 [size=32]
00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=0b, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: dc000000-dc0fffff
Prefetchable memory behind bridge: 000000005000000
Capabilities: <access denied>
00:1f.0 0601: 8086:27b9 (rev 02)
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 80 [Master])
Subsystem: 1179:ff10
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 18b0 [size=16]
Capabilities: <access denied>
00:1f.3 0c05: 8086:27da (rev 02)
Subsystem: 1179:ff10
Flags: medium devsel, IRQ 10
I/O ports at 18c0 [size=32]
05:00.0 0280: 8086:4222 (rev 02)
Subsystem: 8086:1040
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at da000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
07:06.0 0607: 104c:8039
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 168, IRQ 18
Memory at dc007000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 54000000-57fff000
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
16-bit legacy interface ports at 0001
07:06.1 0c00: 104c:803a (prog-if 10 [OHCI])
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 128, IRQ 16
Memory at dc006000 (32-bit, non-prefetchable) [size=2K]
Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
07:06.2 0180: 104c:803b
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 128, IRQ 18
Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
07:06.3 0805: 104c:803c (prog-if 01)
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 128, IRQ 18
Memory at dc006800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
07:08.0 0200: 8086:1092 (rev 02)
Subsystem: 1179:ff10
Flags: bus master, medium devsel, latency 66, IRQ 21
Memory at dc005000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 4000 [size=64]
Capabilities: <access denied>
asound configuration list
Names of available sound cards:
Intel
dmesg
0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f570000 end: 000000003f670000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f670000 size: 0000000000090000 end: 000000003f700000 type: 4
[ 0.000000] copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
[ 0.000000] BIOS-e820: 000000003f670000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f65c0
[ 0.000000] Entering add_active_range(0, 0, 259696) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259696
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259696
[ 0.000000] On node 0 totalpages: 259696
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 236 pages used for memmap
[ 0.000000] HighMem zone: 30084 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 TOSINV ) @ 0x000f6510
[ 0.000000] ACPI: RSDT (v001 TOSINV Capell00 0x06040000 LTP 0x00000000) @ 0x3f67e1bf
[ 0.000000] ACPI: FADT (v001 TOSINV CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f685dee
[ 0.000000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f685e62
[ 0.000000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f685eca
[ 0.000000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f685f02
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3f685fd8
[ 0.000000] ACPI: MADT (v001 TOSINV APIC 0x06040000 LTP 0x00000000) @ 0x3f685f70
[ 0.000000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x3f67f263
[ 0.000000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x3f67ebd1
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x3f67e207
[ 0.000000] ACPI: DSDT (v001 TOSINV CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: 2 duplicate APIC table ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 1729.173 MHz processor.
[ 30.553664] Built 1 zonelists. Total pages: 257668
[ 30.553668] Kernel command line: root=UUID=
[ 30.553824] mapped APIC to ffffd000 (fee00000)
[ 30.553826] mapped IOAPIC to ffffc000 (fec00000)
[ 30.553829] Enabling fast FPU save and restore... done.
[ 30.553832] Enabling unmasked SIMD FPU exception support... done.
[ 30.553839] Initializing CPU#0
[ 30.553915] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 30.555644] Console: colour VGA+ 80x25
[ 30.555948] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 30.556334] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 30.585144] Memory: 1017960k/1038784k available (1992k kernel code, 20116k reserved, 893k data, 328k init, 121280k highmem)
[ 30.585153] virtual kernel memory layout:
[ 30.585154] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 30.585156] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 30.585157] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 30.585158] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 30.585160] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 30.585161] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 30.585162] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 30.585166] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 30.585332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 30.585337] hpet0: 3 64-bit timers, 14318180 Hz
[ 30.586344] Using HPET for base-timer
[ 30.665302] Calibrating delay using timer specific routine.. 3462.09 BogoMIPS (lpj=6924183)
[ 30.665342] Security Framework v1.0.0 initialized
[ 30.665349] SELinux: Disabled at boot.
[ 30.665364] Mount-cache hash table entries: 512
[ 30.665488] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
[ 30.665496] monitor/mwait feature present.
[ 30.665497] using mwait in idle threads.
[ 30.665501] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.665504] CPU: L2 cache: 2048K
[ 30.665507] CPU: Physical Processor ID: 0
[ 30.665509] CPU: Processor Core ID: 0
[ 30.665511] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000
[ 30.665519] Compat vDSO mapped to ffffe000.
[ 30.665523] Remapping vsyscall page to ffffe000
[ 30.665536] Checking 'hlt' instruction... OK.
[ 30.681396] SMP alternatives: switching to UP code
[ 30.681744] Early unpacking initramfs... done
[ 31.033242] ACPI: Core revision 20060707
[ 31.033470] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 31.098554] CPU0: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08
[ 31.098578] SMP alternatives: switching to SMP code
[ 31.098704] Booting processor 1/1 eip 3000
[ 31.109131] Initializing CPU#1
[ 31.189081] Calibrating delay using timer specific routine.. 3458.10 BogoMIPS (lpj=6916215)
[ 31.189088] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000
[ 31.189093] monitor/mwait feature present.
[ 31.189097] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 31.189099] CPU: L2 cache: 2048K
[ 31.189102] CPU: Physical Processor ID: 0
[ 31.189103] CPU: Processor Core ID: 1
[ 31.189105] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000
[ 31.189559] CPU1: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08
[ 31.189584] Total of 2 processors activated (6920.19 BogoMIPS).
[ 31.189790] ENABLING IO-APIC IRQs
[ 31.190002] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 31.337017] checking TSC synchronization across 2 CPUs: passed.
[ 0.004002] Brought up 2 CPUs
[ 0.204172] migration_cost=55
[ 0.204460] Booting paravirtualized kernel on bare hardware
[ 0.204564] Time: 13:56:33 Date: 03/22/107
[ 0.204594] NET: Registered protocol family 16
[ 0.204683] EISA bus registered
[ 0.204688] ACPI: bus type pci registered
[ 0.204836] PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7
[ 0.204839] PCI: Using configuration type 1
[ 0.204840] Setting up standard PCI resources
[ 0.215304] ACPI: Interpreter enabled
[ 0.215306] ACPI: Using IOAPIC for interrupt routing
[ 0.216089] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.216093] PCI: Probing PCI hardware (bus 00)
[ 0.217024] Boot video device is 0000:00:02.0
[ 0.217705] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.217709] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.218777] PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling
[ 0.218867] PCI: Transparent bridge - 0000:00:1e.0
[ 0.218942] PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#07) (try 'pci=assign-
[ 0.218945] Please report the result to linux-kernel to fix this permanently
[ 0.219015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.380759] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.381023] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.381289] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.382460] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.412264] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.412516] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.412767] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.413020] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.413271] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.413524] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.413775] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.414026] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.480098] ACPI: Power Resource [FN00] (off)
[ 0.480240] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.480248] pnp: PnP ACPI init
[ 0.575945] pnp: PnP ACPI: found 10 devices
[ 0.575950] PnPBIOS: Disabled by ACPI PNP
[ 0.575989] PCI: Using ACPI for IRQ routing
[ 0.575992] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.607714] NET: Registered protocol family 8
[ 0.607716] NET: Registered protocol family 20
[ 0.608183] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 0.608188] PCI: Bridge: 0000:00:1c.0
[ 0.608190] IO window: disabled.
[ 0.608196] MEM window: disabled.
[ 0.608201] PREFETCH window: disabled.
[ 0.608206] PCI: Bridge: 0000:00:1c.1
[ 0.608210] IO window: 2000-2fff
[ 0.608216] MEM window: d8000000-d9ffffff
[ 0.608221] PREFETCH window: d2000000-d3ffffff
[ 0.608227] PCI: Bridge: 0000:00:1c.2
[ 0.608231] IO window: 3000-3fff
[ 0.608237] MEM window: da000000-dbffffff
[ 0.608242] PREFETCH window: d4000000-d5ffffff
[ 0.608255] PCI: Bus 8, cardbus bridge: 0000:07:06.0
[ 0.608257] IO window: 00004400-000044ff
[ 0.608262] IO window: 00004800-000048ff
[ 0.608267] PREFETCH window: 50000000-53ffffff
[ 0.608272] MEM window: 54000000-57ffffff
[ 0.608277] PCI: Bridge: 0000:00:1e.0
[ 0.608280] IO window: 4000-4fff
[ 0.608287] MEM window: dc000000-dc0fffff
[ 0.608292] PREFETCH window: 50000000-53ffffff
[ 0.608323] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 0.608330] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.608356] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[ 0.608362] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.608387] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.608393] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.608408] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.608425] PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
[ 0.608429] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.608463] NET: Registered protocol family 2
[ 0.647777] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.647886] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.648614] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.648987] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.648989] TCP reno registered
[ 0.663854] checking if image is initramfs... it is
[ 1.360597] Freeing initrd memory: 7465k freed
[ 1.360788] Simple Boot Flag at 0x36 set to 0x1
[ 1.361265] audit: initializing netlink socket (disabled)
[ 1.361280] audit(117725019
[ 1.361376] highmem bounce pool size: 64 pages
[ 1.361461] VFS: Disk quotas dquot_6.5.1
[ 1.361479] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.361524] io scheduler noop registered
[ 1.361527] io scheduler anticipatory registered
[ 1.361529] io scheduler deadline registered
[ 1.361541] io scheduler cfq registered (default)
[ 1.361787] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.361849] assign_
[ 1.361853] Allocate Port Service[
[ 1.361887] Allocate Port Service[
[ 1.362021] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.362082] assign_
[ 1.362084] Allocate Port Service[
[ 1.362118] Allocate Port Service[
[ 1.362246] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.362307] assign_
[ 1.362309] Allocate Port Service[
[ 1.362341] Allocate Port Service[
[ 1.362526] isapnp: Scanning for PnP cards...
[ 1.716197] isapnp: No Plug & Play device found
[ 1.740415] Real Time Clock Driver v1.12ac
[ 1.740479] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.741132] mice: PS/2 mouse device common for all mice
[ 1.741698] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.741849] input: Macintosh mouse button emulation as /class/input/input0
[ 1.741888] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.741892] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.742199] PNP: PS/2 Controller [PNP0303:
[ 1.744766] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.746248] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.746252] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.746255] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.746260] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.746263] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.746362] EISA: Probing bus 0 at eisa.0
[ 1.746371] Cannot allocate resource for EISA slot 1
[ 1.746374] Cannot allocate resource for EISA slot 2
[ 1.746377] Cannot allocate resource for EISA slot 3
[ 1.746379] Cannot allocate resource for EISA slot 4
[ 1.746397] EISA: Detected 0 cards.
[ 1.776487] TCP cubic registered
[ 1.776497] NET: Registered protocol family 1
[ 1.776523] Starting balanced_irq
[ 1.776529] Using IPI No-Shortcut mode
[ 1.776633] ACPI: (supports S0 S3 S4 S5)
[ 1.776682] Magic number: 3:908:938
[ 1.776980] Freeing unused kernel memory: 328k freed
[ 1.779256] Time: tsc clocksource has been installed.
[ 1.780656] input: AT Translated Set 2 keyboard as /class/input/input1
[ 2.993856] Capability LSM initialized
[ 3.008868] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: <email address hidden>
[ 3.032853] ACPI: Transitioning device [FAN0] to D3
[ 3.032856] ACPI: Transitioning device [FAN0] to D3
[ 3.032859] ACPI: Fan [FAN0] (off)
[ 3.037469] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 3.037689] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 3.037967] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 3.037971] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.038474] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 3.038679] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 3.039026] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 3.039031] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.039846] ACPI: Thermal Zone [TZ00] (51 C)
[ 3.044413] ACPI: Invalid passive threshold
[ 3.049315] ACPI: Transitioning device [FAN0] to D0
[ 3.049317] ACPI: Transitioning device [FAN0] to D0
[ 3.049319] ACPI: Unable to turn cooling device [df83839c] 'on'
[ 3.049322] ACPI: Thermal Zone [TZ01] (49 C)
[ 3.660000] Time: hpet clocksource has been installed.
[ 3.696000] md: linear personality registered for level -1
[ 3.700000] md: multipath personality registered for level -4
[ 3.704000] md: raid0 personality registered for level 0
[ 3.708000] md: raid1 personality registered for level 1
[ 3.712000] raid5: automatically using best checksumming function: pIII_sse
[ 3.732000] pIII_sse : 4391.000 MB/sec
[ 3.732000] raid5: using function: pIII_sse (4391.000 MB/sec)
[ 3.800000] raid6: int32x1 544 MB/s
[ 3.868000] raid6: int32x2 635 MB/s
[ 3.936000] raid6: int32x4 531 MB/s
[ 4.004000] raid6: int32x8 454 MB/s
[ 4.072000] raid6: mmxx1 1578 MB/s
[ 4.140000] raid6: mmxx2 1744 MB/s
[ 4.208000] raid6: sse1x1 1178 MB/s
[ 4.276000] raid6: sse1x2 1629 MB/s
[ 4.344000] raid6: sse2x1 1799 MB/s
[ 4.412000] raid6: sse2x2 1969 MB/s
[ 4.412000] raid6: using algorithm sse2x2 (1969 MB/s)
[ 4.412000] md: raid6 personality registered for level 6
[ 4.412000] md: raid5 personality registered for level 5
[ 4.412000] md: raid4 personality registered for level 4
[ 4.416000] SCSI subsystem initialized
[ 4.428000] ieee1394: Initialized config rom entry `ip1394'
[ 4.444000] libata version 2.20 loaded.
[ 4.448000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 4.448000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.452000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 4.452000] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.452000] usbcore: registered new interface driver usbfs
[ 4.452000] usbcore: registered new interface driver hub
[ 4.452000] usbcore: registered new device driver usb
[ 4.452000] USB Universal Host Controller Interface driver v3.0
[ 4.484000] md: raid10 personality registered for level 10
[ 4.604000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 4.604000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.604000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
[ 4.604000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
[ 4.604000] scsi0 : ata_piix
[ 4.768000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 4.768000] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100
[ 4.768000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.776000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 4.776000] ata1.00: configured for UDMA/100
[ 4.776000] scsi1 : ata_piix
[ 5.096000] ata2.00: ATAPI, max UDMA/33
[ 5.260000] ata2.00: configured for UDMA/33
[ 5.260000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 5.264000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.60 PQ: 0 ANSI: 5
[ 5.264000] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 16
[ 5.264000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 5.264000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 5.264000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.264000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.264000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
[ 5.264000] usb usb1: configuration #1 chosen from 1 choice
[ 5.264000] hub 1-0:1.0: USB hub found
[ 5.264000] hub 1-0:1.0: 2 ports detected
[ 5.312000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[dc006000-
[ 5.316000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 5.316000] sda: Write Protect is off
[ 5.316000] sda: Mode Sense: 00 3a 00 00
[ 5.316000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.316000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 5.316000] sda: Write Protect is off
[ 5.316000] sda: Mode Sense: 00 3a 00 00
[ 5.316000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.316000] sda: sda1 sda2 sda3
[ 5.368000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 5.368000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 5.368000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.368000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.368000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 5.368000] usb usb2: configuration #1 chosen from 1 choice
[ 5.368000] hub 2-0:1.0: USB hub found
[ 5.368000] hub 2-0:1.0: 2 ports detected
[ 5.372000] sd 0:0:0:0: Attached scsi disk sda
[ 5.376000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.376000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.376000] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.376000] Uniform CD-ROM driver Revision: 3.20
[ 5.376000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.472000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 5.472000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 5.472000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.472000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 5.472000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 5.472000] usb usb3: configuration #1 chosen from 1 choice
[ 5.472000] hub 3-0:1.0: USB hub found
[ 5.472000] hub 3-0:1.0: 2 ports detected
[ 5.576000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 5.576000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 5.576000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.580000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 5.580000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[ 5.580000] usb usb4: configuration #1 chosen from 1 choice
[ 5.580000] hub 4-0:1.0: USB hub found
[ 5.580000] hub 4-0:1.0: 2 ports detected
[ 5.636000] Attempting manual resume
[ 5.636000] swsusp: Resume From Partition 8:3
[ 5.636000] PM: Checking swsusp image.
[ 5.636000] PM: Resume from disk failed.
[ 5.664000] kjournald starting. Commit interval 5 seconds
[ 5.664000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.684000] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 5.696000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 5.696000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 5.696000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.696000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 5.696000] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.696000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 5.696000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc444000
[ 5.700000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.700000] usb usb5: configuration #1 chosen from 1 choice
[ 5.700000] hub 5-0:1.0: USB hub found
[ 5.700000] hub 5-0:1.0: 8 ports detected
[ 5.712000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 5.712000] e100: eth0: e100_probe: addr 0xdc005000, irq 21, MAC addr 00:A0:D1:51:96:F5
[ 6.228000] usb 2-1: new low speed USB device using uhci_hcd and address 3
[ 6.396000] usb 2-1: configuration #1 chosen from 1 choice
[ 21.352000] Linux agpgart interface v0.102 (c) Dave Jones
[ 21.360000] agpgart: Detected an Intel 945GM Chipset.
[ 21.360000] agpgart: Detected 7932K stolen memory.
[ 21.376000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 21.412000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.416000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.632000] iTCO_vendor_
[ 21.660000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 21.660000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 21.660000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.680000] intel_rng: FWH not detected
[ 21.808000] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 21.836000] NET: Registered protocol family 17
[ 21.936000] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
[ 21.936000] Yenta: Enabling burst memory read transactions
[ 21.936000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 21.936000] Yenta: Routing CardBus interrupts to PCI
[ 21.936000] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
[ 21.992000] ieee80211_crypt: registered algorithm 'NULL'
[ 21.992000] ieee80211: 802.11 data/management
[ 21.992000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 22.012000] sdhci: Secure Digital Host Controller Interface driver
[ 22.012000] sdhci: Copyright(c) Pierre Ossman
[ 22.084000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[ 22.084000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 22.088000] usbcore: registered new interface driver hiddev
[ 22.168000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[ 22.168000] Socket status: 30000006
[ 22.168000] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
[ 22.168000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 22.168000] cs: IO port probe 0x4000-0x4fff: clean.
[ 22.168000] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
[ 22.168000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 22.172000] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
[ 22.172000] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18
[ 22.172000] mmc0: SDHCI at 0xdc006800 irq 18 DMA
[ 22.180000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 22.180000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 22.184000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 22.200000] input: PS/2+USB Mouse as /class/input/input2
[ 22.200000] input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1
[ 22.200000] usbcore: registered new interface driver usbhid
[ 22.200000] drivers/
[ 22.320000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 22.320000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 22.528000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[ 22.528000] synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
[ 22.560000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 22.572000] cs: IO port probe 0x100-0x3af: clean.
[ 22.576000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 0x4d0-0x4d7
[ 22.576000] cs: IO port probe 0x820-0x8ff: clean.
[ 22.576000] cs: IO port probe 0xc00-0xcf7: clean.
[ 22.576000] cs: IO port probe 0xa00-0xaff: clean.
[ 24.076000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[ 24.908000] lp: driver loaded but no devices found
[ 24.972000] Adding 4192956k swap on /dev/disk/
[ 25.072000] EXT3 FS on sda2, internal journal
[ 25.856000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 25.924000] NTFS volume version 3.1.
[ 28.608000] NET: Registered protocol family 10
[ 28.608000] lo: Disabled Privacy Extensions
[ 28.608000] ADDRCONF(
[ 31.156000] DLM (built Apr 15 2007 05:39:11) installed
[ 31.184000] GFS2 (built Apr 15 2007 05:40:46) installed
[ 31.188000] Lock_DLM (built Apr 15 2007 05:41:06) installed
[ 33.156000] SCTP: Hash tables configured (established 65536 bind 65536)
[ 33.156000] Module sctp cannot be unloaded due to unsafe usage in net/sctp/
[ 33.612000] ACPI: AC Adapter [ADP0] (on-line)
[ 33.724000] ACPI: Battery Slot [BAT0] (battery present)
[ 33.740000] input: Power Button (FF) as /class/input/input4
[ 33.740000] ACPI: Power Button (FF) [PWRF]
[ 33.740000] input: Lid Switch as /class/input/input5
[ 33.740000] ACPI: Lid Switch [LID]
[ 33.740000] input: Power Button (CM) as /class/input/input6
[ 33.740000] ACPI: Power Button (CM) [PWRB]
[ 33.812000] Using specific hotkey driver
[ 33.864000] ACPI: Error installing notify handler
[ 33.864000] Device 'dock.0' does not have a release() function, it is broken and must be fixed.
[ 33.864000] BUG: at drivers/
[ 33.864000] [<c01ed5f9>] kobject_
[ 33.864000] [<c01ed640>] kobject_
[ 33.864000] [<c01ee2fb>] kref_put+0x2b/0xa0
[ 33.864000] [<f8f3d723>] find_dock+
[ 33.864000] [<c021cb4d>] acpi_ns_
[ 33.864000] [<c021b304>] acpi_walk_
[ 33.864000] [<f8f3d553>] find_dock+0x0/0x1f0 [dock]
[ 33.864000] [<f8a1f03c>] dock_init+0x3c/0x55 [dock]
[ 33.864000] [<f8f3d553>] find_dock+0x0/0x1f0 [dock]
[ 33.864000] [<c014421d>] sys_init_
[ 33.864000] [<c0107a5d>] sys_mmap2+0xcd/0xd0
[ 33.864000] [<c01031f0>] sysenter_
[ 33.864000] =======
[ 33.864000] No dock devices found.
[ 33.932000] ibm_acpi: ec object not found
[ 34.048000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 34.048000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 34.084000] pcc_acpi: loading...
[ 38.904000] eth1: no IPv6 routers present
[ 40.040000] [drm] Initialized drm 1.1.0 20060810
[ 40.040000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 40.040000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 43.536000] ppdev: user-space parallel port driver
[ 49.912000] ACPI: Transitioning device [FAN0] to D0
[ 49.912000] ACPI: Transitioning device [FAN0] to D0
[ 49.912000] ACPI: Unable to turn cooling device [df83839c] 'on'
[ 50.076000] apm: BIOS not found.
[ 83.216000] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 84.720000] NFSD: Using /var/lib/
[ 84.740000] NFSD: starting 90-second grace period
[ 94.452000] vmmon: module license 'unspecified' taints kernel.
[ 94.456000] /dev/vmmon[6049]: Module vmmon: registered with major=10 minor=165
[ 94.456000] /dev/vmmon[6049]: Module vmmon: initialized
[ 95.320000] /dev/vmnet: open called by PID 6081 (vmnet-bridge)
[ 95.320000] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 95.320000] /dev/vmnet: port on hub 0 successfully opened
[ 95.324000] bridge-eth0: enabling the bridge
[ 95.324000] bridge-eth0: up
[ 95.324000] bridge-eth0: already up
[ 95.324000] bridge-eth0: attached
[ 95.772000] /dev/vmnet: open called by PID 6095 (vmnet-natd)
[ 95.772000] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 95.772000] /dev/vmnet: port on hub 8 successfully opened
[ 98.908000] Bluetooth: Core ver 2.11
[ 98.908000] NET: Registered protocol family 31
[ 98.908000] Bluetooth: HCI device and connection manager initialized
[ 98.908000] Bluetooth: HCI socket layer initialized
[ 99.044000] Bluetooth: L2CAP ver 2.8
[ 99.044000] Bluetooth: L2CAP socket layer initialized
[ 99.200000] Bluetooth: RFCOMM socket layer initialized
[ 99.200000] Bluetooth: RFCOMM TTY layer initialized
[ 99.200000] Bluetooth: RFCOMM ver 1.8
[ 105.352000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[ 105.840000] /dev/vmnet: open called by PID 6549 (vmnet-netifup)
[ 105.840000] /dev/vmnet: port on hub 8 successfully opened
[ 105.840000] /dev/vmnet: open called by PID 6550 (vmnet-netifup)
[ 105.840000] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 105.840000] /dev/vmnet: port on hub 1 successfully opened
[ 108.800000] /dev/vmnet: open called by PID 6572 (vmnet-dhcpd)
[ 108.800000] /dev/vmnet: port on hub 1 successfully opened
[ 108.800000] /dev/vmnet: open called by PID 6568 (vmnet-dhcpd)
[ 108.800000] /dev/vmnet: port on hub 8 successfully opened
[ 116.408000] vmnet1: no IPv6 routers present
[ 116.744000] vmnet8: no IPv6 routers present