The Ubuntu 6.06LTS installer crashed(due to problems with promise-controller?)

[Peter2K]

Binary package hint: ubiquity

Hi,

I have a BX chipset board with 1024MB main memory and promise PATA 66 Controller on board. My CDROM hangs as a master on the second master of the BX chipset IDE-controller and the samsung spinpoint P80 disk on the first master of the promise-controller, but with an 40 cable. During installation, the system works fine first, even with UDMA. But after a lot of time some errors occurs under dmesg (Timout waiting for DMA) and the DMA is switched off then. After a lot of miniutes crashed the installation routine then (That DMA error persists in 6.10, but I had no crashes during installation).
The summary of the crash whatcher is:
Traceback (most recent call last):
  File "/usr/bin/ubiquity", line 130, in ?
    install(sys.argv[1])
  File "/usr/bin/ubiquity", line 55, in install
    ret = wizard.run()
  File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 266, in run
    self.process_step()
  File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 755, in process_step
    self.mountpoints_to_summary()
  File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 1114, in mountpoints_to_summary
    self.progress_loop()
  File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 550, in progress_loop
    raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
  File "/usr/share/ubiquity/install.py", line 1263, in ?
    if install.run():
  File "/usr/share/ubiquity/install.py", line 284, in run
    if not self.copy_all():
  File "/usr/share/ubiquity/install.py", line 466, in copy_all
    shutil.copyfile(sourcepath, targetpath)
  File "/usr/lib/python2.4/shutil.py", line 49, in copyfile
    copyfileobj(fsrc, fdst)
  File "/usr/lib/python2.4/shutil.py", line 25, in copyfileobj
    fdst.write(buf)
IOError: [Errno 30] Read-only file system

syslog:
Ubiquity 1.0.17
Fri, 20 Apr 2007 22:18:20 INFO switched to page stepLanguage
ubiquity: Starting up '['/usr/lib/ubiquity/localechooser/localechooser']' for ubiquity.components.language.Language
ubiquity: Watching for question patterns ^languagechooser/language-name
Fr, 20 Apr 2007 22:18:28 INFO Step_before = stepLanguage
Fr, 20 Apr 2007 22:18:30 INFO switched to page stepLocation
Fr, 20 Apr 2007 22:18:30 INFO Step_after = stepLocation
ubiquity: Starting up '['/usr/share/ubiquity/tzsetup']' for ubiquity.components.timezone.Timezone
ubiquity: Watching for question patterns ^time/zone$
Fr, 20 Apr 2007 22:18:42 INFO Step_before = stepLocation
Fr, 20 Apr 2007 22:18:42 INFO switched to page stepKeyboardConf
Fr, 20 Apr 2007 22:18:42 INFO Step_after = stepKeyboardConf
ubiquity: kbd-chooser prepare
ubiquity: Starting up '['/bin/sh', '-c', '. /usr/share/debconf/confmodule; exec /usr/lib/ubiquity/kbd-chooser/kbd-chooser']' for ubiquity.components.kbd_chooser.KbdChooser
ubiquity: Watching for question patterns ^kbd-chooser/method$, ^console-keymaps.*/keymap$, ERROR
ubiquity: apply_keyboard: de-latin1-nodeadkeys
ubiquity: apply_keyboard: layout de, variant nodeadkeys
ubiquity: Display map: {u'Englisch (britisch)': u'uk', u'Russisch': u'ru', u'Japanisch (106 Tasten)': u'jp106', u'Niederl\xe4ndisch': u'nl', u'Franz\xf6sisch (mit Euro)': u'fr-latin9', u'Tschechisch': u'cz-lat2', u'Ukrainisch': u'ua', u'Italienisch': u'it', u'Brasilianisch (ABNT2 Anordnung)': u'br-abnt2', u'Bulgarisch': u'bg', u'Schwedisch': u'se-latin1', u'Polnisch': u'pl', u'Lateinamerikanisch': u'la-latin1', u'Schweizerdeutsch': u'sg-latin1', u'Hebr\xe4isch': u'hebrew', u'Franz\xf6sisch (Schweizerisch)': u'fr_CH-latin1', u'Belgisch': u'be2-latin1', u'T\xfcrkisch (F Anordnung)': u'trfu', u'Dvorak': u'dvorak', u'Englisch (amerikanisch)': u'us', u'Finnisch': u'fi-latin1', u'Portugiesisch': u'pt-latin1', u'Kroatisch': u'croat', u'Spanisch': u'es', u'Slowenisch': u'slovene', u'T\xfcrkisch (Q Anordnung)': u'trqu', u'Franz\xf6sisch (Kanadisch)': u'cf', u'Rum\xe4nisch': u'ro', u'Wei\xdfrussisch': u'by', u'Ungarisch': u'hu', u'Serbisch (Kyrillisch)': u'sr-cy', u'Deutsch': u'de-latin1-nodeadkeys', u'Litauisch': u'lt', u'Estnisch': u'et', u'Brasilianisch (EUA Anordnung)': u'br-latin1', u'D\xe4nisch': u'dk-latin1', u'Lateinamerika lv-latin4': u'lv-latin4', u'Slovakisch': u'sk-qwerty', u'Griechisch': u'gr', u'Isl\xe4ndisch': u'is-latin1', u'Mazedonisch': u'mk', u'Norwegisch': u'no-latin1'}
ubiquity: Untranslated choices: [u'by', u'bg', u'croat', u'cz-lat2', u'sg-latin1', u'de-latin1-nodeadkeys', u'dk-latin1', u'us', u'uk', u'dvorak', u'et', u'es', u'la-latin1', u'fi-latin1', u'fr-latin9', u'be2-latin1', u'cf', u'fr_CH-latin1', u'gr', u'hebrew', u'hu', u'is-latin1', u'it', u'lt', u'lv-latin4', u'jp106', u'mk', u'no-latin1', u'nl', u'pl', u'pt-latin1', u'br-abnt2', u'br-latin1', u'ro', u'ru', u'sk-qwerty', u'slovene', u'sr-cy', u'se-latin1', u'trfu', u'trqu', u'ua']
ubiquity: Choices: [u'Wei\xdfrussisch', u'Bulgarisch', u'Kroatisch', u'Tschechisch', u'Schweizerdeutsch', u'Deutsch', u'D\xe4nisch', u'Englisch (amerikanisch)', u'Englisch (britisch)', u'Dvorak', u'Estnisch', u'Spanisch', u'Lateinamerikanisch', u'Finnisch', u'Franz\xf6sisch (mit Euro)', u'Belgisch', u'Franz\xf6sisch (Kanadisch)', u'Franz\xf6sisch (Schweizerisch)', u'Griechisch', u'Hebr\xe4isch', u'Ungarisch', u'Isl\xe4ndisch', u'Italienisch', u'Litauisch', u'Lateinamerika lv-latin4', u'Japanisch (106 Tasten)', u'Mazedonisch', u'Norwegisch', u'Niederl\xe4ndisch', u'Polnisch', u'Portugiesisch', u'Brasilianisch (ABNT2 Anordnung)', u'Brasilianisch (EUA Anordnung)', u'Rum\xe4nisch', u'Russisch', u'Slovakisch', u'Slowenisch', u'Serbisch (Kyrillisch)', u'Schwedisch', u'T\xfcrkisch (F Anordnung)', u'T\xfcrkisch (Q Anordnung)', u'Ukrainisch']
ubiquity: console-keymaps-at/keymap db: de-latin1-nodeadkeys
ubiquity: apply_keyboard: us
ubiquity: apply_keyboard: layout us, model pc104
Fr, 20 Apr 2007 22:19:30 INFO Step_before = stepKeyboardConf
Fr, 20 Apr 2007 22:19:30 INFO switched to page stepUserInfo
Fr, 20 Apr 2007 22:19:30 INFO Step_after = stepUserInfo
ubiquity: Starting up '['/usr/lib/ubiquity/user-setup/user-setup-ask', '/target']' for ubiquity.components.usersetup.UserSetup
ubiquity: Watching for question patterns ^passwd/user-fullname$, ^passwd/username$, ^passwd/user-password$, ^passwd/user-password-again$, ERROR
ON STATE: 1
ON STATE: 2
ON STATE: 3
ON STATE: 4
ON STATE: 5
ON STATE: 6
ON STATE: 7
ON STATE: 8
Fr, 20 Apr 2007 22:19:53 INFO Step_before = stepUserInfo
Fr, 20 Apr 2007 22:19:53 INFO switched to page stepPartDisk
Fr, 20 Apr 2007 22:19:53 INFO Step_after = stepPartDisk
ubiquity: Starting up '/bin/partman' for ubiquity.components.partman.Partman
ubiquity: Watching for question patterns ^partman-auto/select_disk$, ^partman-auto/.*automatically_partition$, ^partman-partitioning/new_size$, ^partman/choose_partition$, ^partman/confirm.*, type:boolean, ERROR, PROGRESS
unsupported
kernelmodules_basicfilesystems
kernelmodules_ext3
kernelmodules_jfs
kernelmodules_reiserfs
kernelmodules_xfs
umount_target
parted
dump
update_partitions
filesystems_detected
auto_mountpoints
autouse_swap
backup
Fr, 20 Apr 2007 22:20:07 INFO switched to page stepPartAuto
ubiquity: /bin/partman exited with code 10
Fr, 20 Apr 2007 22:20:10 INFO Step_before = stepPartAuto
Fr, 20 Apr 2007 22:20:10 INFO gparted_loop()
Fr, 20 Apr 2007 22:20:10 INFO Disabling swap on /dev/hde5
Fr, 20 Apr 2007 22:20:10 INFO switched to page stepPartAdvanced
Fr, 20 Apr 2007 22:20:10 INFO Step_after = stepPartAdvanced
Error reading inode 1901.
Error reading inode 2707.
Error reading inode 2729.
Error reading inode 3482.
Error reading inode 4135.
Error reading inode 4358.
Error reading inode 4482.
Error reading inode 7031.
Error reading inode 7032.
Error reading inode 7035.
Error reading inode 7399.
Error reading inode 16648.
Error reading inode 16867.
Error reading inode 16961.
Error reading inode 18154.
Error reading inode 18233.
Error reading inode 20991.
Error reading inode 23885.
Error reading inode 24133.
dumpe2fs 1.38 (30-Jun-2005)
Warning: Kann /dev/hdc nicht zum Schreiben öffnen (Read-only file system). /dev/hdc wurde nur zum Lesen geöffnet.
Error: /dev/hdc kann nicht geöffnet werden - unerkanntes Disklabel.
Fr, 20 Apr 2007 22:21:11 INFO Step_before = stepPartAdvanced
Fr, 20 Apr 2007 22:21:17 INFO gparted replied: - FORMAT /dev/hde6 ext3
Error reading inode 1901.
Error reading inode 2707.
Error reading inode 2729.
Error reading inode 3482.
Error reading inode 4135.
Error reading inode 4358.
Error reading inode 4482.
Error reading inode 7031.
Error reading inode 7032.
Error reading inode 7035.
Error reading inode 7399.
Error reading inode 16648.
Error reading inode 16867.
Error reading inode 16961.
Error reading inode 18154.
Error reading inode 18233.
Error reading inode 20991.
Error reading inode 23885.
Error reading inode 24133.
Warning: Kann /dev/hdc nicht zum Schreiben öffnen (Read-only file system). /dev/hdc wurde nur zum Lesen geöffnet.
Error: /dev/hdc kann nicht geöffnet werden - unerkanntes Disklabel.
Fr, 20 Apr 2007 22:21:19 INFO gparted replied: 0 OK
Fr, 20 Apr 2007 22:21:19 INFO switched to page stepPartMountpoints
Fr, 20 Apr 2007 22:21:19 INFO Step_after = stepPartMountpoints
Fr, 20 Apr 2007 22:22:40 INFO Step_before = stepPartMountpoints
Fr, 20 Apr 2007 22:22:40 INFO mountpoints: {'/dev/hde1': ('/media/hde1', False, None), '/dev/hde5': ('swap', True, None), '/dev/hde6': ('/', True, 'ext3')}
ubiquity: Starting up '/bin/partman' for ubiquity.components.partman_commit.PartmanCommit
ubiquity: Watching for question patterns ^partman/choose_partition$, ^partman/confirm.*, type:boolean, ERROR, PROGRESS
mkdir: kann Verzeichnis „/var/lib/partman“ nicht anlegen: File exists
unsupported
kernelmodules_basicfilesystems
kernelmodules_ext3
kernelmodules_jfs
kernelmodules_reiserfs
kernelmodules_xfs
umount_target
parted
dump
update_partitions
filesystems_detected
auto_mountpoints
autouse_swap
backup
Fr, 20 Apr 2007 22:22:52 INFO switched to page stepReady
ubiquity: Starting up '['/usr/share/ubiquity/summary']' for ubiquity.components.summary.Summary
ubiquity: Watching for question patterns ^ubiquity/summary$
swapon: /dev/hde5: Device or resource busy
swapon: /dev/hde5: Device or resource busy
swapon: /dev/hde5: Device or resource busy
swapon: /dev/hde5: Device or resource busy
umount /target/
swapoff /dev/hde5
chroot: cannot run command `apt-get': No such file or directory
Fr, 20 Apr 2007 22:27:01 INFO progress_loop()
ubiquity: Starting up '['/usr/share/ubiquity/install.py']' for ubiquity.components.install.Install
ubiquity: Watching for question patterns ^.*/apt-install-failed$, grub-installer/install_to_xfs, CAPB, ERROR, PROGRESS
/usr/lib/python2.4/site-packages/apt/__init__.py:17: FutureWarning: apt API not stable yet
  warnings.warn("apt API not stable yet", FutureWarning)
Exception during installation:
Traceback (most recent call last):
  File "/usr/share/ubiquity/install.py", line 1263, in ?
    if install.run():
  File "/usr/share/ubiquity/install.py", line 284, in run
    if not self.copy_all():
  File "/usr/share/ubiquity/install.py", line 466, in copy_all
    shutil.copyfile(sourcepath, targetpath)
  File "/usr/lib/python2.4/shutil.py", line 49, in copyfile
    copyfileobj(fsrc, fdst)
  File "/usr/lib/python2.4/shutil.py", line 25, in copyfileobj
    fdst.write(buf)
IOError: [Errno 30] Read-only file system

ubiquity: ['/usr/share/ubiquity/install.py'] exited with code 1
Exception in GTK frontend (invoking crash handler):
Traceback (most recent call last):
  File "/usr/bin/ubiquity", line 130, in ?
    install(sys.argv[1])
  File "/usr/bin/ubiquity", line 55, in install
    ret = wizard.run()
  File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 266, in run
    self.process_step()
  File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 755, in process_step
    self.mountpoints_to_summary()
  File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 1114, in mountpoints_to_summary
    self.progress_loop()
  File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 550, in progress_loop
    raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
  File "/usr/share/ubiquity/install.py", line 1263, in ?
    if install.run():
  File "/usr/share/ubiquity/install.py", line 284, in run
    if not self.copy_all():
  File "/usr/share/ubiquity/install.py", line 466, in copy_all
    shutil.copyfile(sourcepath, targetpath)
  File "/usr/lib/python2.4/shutil.py", line 49, in copyfile
    copyfileobj(fsrc, fdst)
  File "/usr/lib/python2.4/shutil.py", line 25, in copyfileobj
    fdst.write(buf)
IOError: [Errno 30] Read-only file system

.....ill probe irqs later
Apr 20 22:16:31 ubuntu kernel: [17179575.576000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Apr 20 22:16:31 ubuntu kernel: [17179575.576000] Probing IDE interface ide1...
Apr 20 22:16:31 ubuntu kernel: [17179576.312000] hdc: TSSTcorp CD-ROM SH-C522C, ATAPI CD/DVD-ROM drive
Apr 20 22:16:31 ubuntu kernel: [17179576.984000] ide1 at 0x170-0x177,0x376 on irq 15
Apr 20 22:16:31 ubuntu kernel: [17179577.000000] hdc: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
Apr 20 22:16:31 ubuntu kernel: [17179577.000000] Uniform CD-ROM driver Revision: 3.20
Apr 20 22:16:31 ubuntu kernel: [17179577.072000] PDC20262: IDE controller at PCI slot 0000:00:0e.0
Apr 20 22:16:31 ubuntu kernel: [17179577.072000] **** SET: Misaligned resource pointer: dfe850c2 Type 07 Len 0
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] PCI: setting IRQ 11 as level-triggered
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] PDC20262: chipset revision 1
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] PDC20262: ROM enabled at 0xde000000
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] PDC20262: 100%% native mode on irq 11
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] ide2: BM-DMA at 0xc000-0xc007, BIOS settings: hde:DMA, hdf:DMA
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] ide3: BM-DMA at 0xc008-0xc00f, BIOS settings: hdg:pio, hdh:pio
Apr 20 22:16:31 ubuntu kernel: [17179577.076000] Probing IDE interface ide2...
Apr 20 22:16:31 ubuntu kernel: [17179577.364000] hde: SAMSUNG SP0812N, ATA DISK drive
Apr 20 22:16:31 ubuntu kernel: [17179578.036000] Warning: Primary channel requires an 80-pin cable for operation.
Apr 20 22:16:31 ubuntu kernel: [17179578.036000] hde reduced to Ultra33 mode.
Apr 20 22:16:31 ubuntu kernel: [17179578.036000] ide2 at 0xb000-0xb007,0xb402 on irq 11
Apr 20 22:16:31 ubuntu kernel: [17179578.036000] Probing IDE interface ide3...
Apr 20 22:16:31 ubuntu kernel: [17179578.616000] hde: max request size: 1024KiB
Apr 20 22:16:31 ubuntu kernel: [17179578.620000] hde: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
Apr 20 22:16:31 ubuntu kernel: [17179578.620000] hde: cache flushes supported
Apr 20 22:16:31 ubuntu kernel: [17179578.620000] hde: hde1 hde2 < hde5 hde6 >
Apr 20 22:16:31 ubuntu kernel: [17179578.940000] usbcore: registered new driver usbfs
Apr 20 22:16:31 ubuntu kernel: [17179578.940000] usbcore: registered new driver hub
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] **** SET: Misaligned resource pointer: dfd927e2 Type 07 Len 0
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] PCI: setting IRQ 5 as level-triggered
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] ehci_hcd 0000:00:0b.2: EHCI Host Controller
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] ehci_hcd 0000:00:0b.2: irq 5, io mem 0xdf02a000
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] hub 1-0:1.0: USB hub found
Apr 20 22:16:31 ubuntu kernel: [17179578.948000] hub 1-0:1.0: 4 ports detected
Apr 20 22:16:31 ubuntu kernel: [17179578.964000] USB Universal Host Controller Interface driver v2.3
Apr 20 22:16:31 ubuntu kernel: [17179578.968000] **** SET: Misaligned resource pointer: dfd925e2 Type 07 Len 0
Apr 20 22:16:31 ubuntu kernel: [17179578.968000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
Apr 20 22:16:31 ubuntu kernel: [17179578.968000] PCI: setting IRQ 10 as level-triggered
Apr 20 22:16:31 ubuntu kernel: [17179578.968000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Apr 20 22:16:31 ubuntu kernel: [17179578.968000] uhci_hcd 0000:00:07.2: UHCI Host Controller
Apr 20 22:16:31 ubuntu kernel: [17179579.052000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
Apr 20 22:16:31 ubuntu kernel: [17179579.052000] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000a000
Apr 20 22:16:31 ubuntu kernel: [17179579.052000] hub 2-0:1.0: USB hub found
Apr 20 22:16:31 ubuntu kernel: [17179579.052000] hub 2-0:1.0: 2 ports detected
Apr 20 22:16:31 ubuntu kernel: [17179579.156000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Apr 20 22:16:31 ubuntu kernel: [17179579.156000] uhci_hcd 0000:00:0b.0: UHCI Host Controller
Apr 20 22:16:31 ubuntu kernel: [17179579.156000] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3
Apr 20 22:16:31 ubuntu kernel: [17179579.156000] uhci_hcd 0000:00:0b.0: irq 10, io base 0x0000a800
Apr 20 22:16:31 ubuntu kernel: [17179579.156000] hub 3-0:1.0: USB hub found
Apr 20 22:16:31 ubuntu kernel: [17179579.156000] hub 3-0:1.0: 2 ports detected
Apr 20 22:16:31 ubuntu kernel: [17179579.260000] **** SET: Misaligned resource pointer: dfa15e02 Type 07 Len 0
Apr 20 22:16:31 ubuntu kernel: [17179579.260000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Apr 20 22:16:31 ubuntu kernel: [17179579.260000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr 20 22:16:31 ubuntu kernel: [17179579.260000] uhci_hcd 0000:00:0b.1: UHCI Host Controller
Apr 20 22:16:31 ubuntu kernel: [17179579.260000] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4
Apr 20 22:16:31 ubuntu kernel: [17179579.260000] uhci_hcd 0000:00:0b.1: irq 11, io base 0x0000ac00
Apr 20 22:16:31 ubuntu kernel: [17179579.260000] hub 4-0:1.0: USB hub found
Apr 20 22:16:31 ubuntu kernel: [17179579.260000] hub 4-0:1.0: 2 ports detected
Apr 20 22:16:31 ubuntu kernel: [17179579.396000] usb 2-2: new full speed USB device using uhci_hcd and address 2
Apr 20 22:16:31 ubuntu kernel: [17179579.452000] Probing IDE interface ide0...
Apr 20 22:16:31 ubuntu kernel: [17179579.540000] hub 2-2:1.0: USB hub found
Apr 20 22:16:31 ubuntu kernel: [17179579.544000] hub 2-2:1.0: 4 ports detected
Apr 20 22:16:31 ubuntu kernel: [17179580.016000] Probing IDE interface ide3...
Apr 20 22:16:31 ubuntu kernel: [17179581.532000] ISO 9660 Extensions: Microsoft Joliet Level 3
Apr 20 22:16:31 ubuntu kernel: [17179581.572000] ISO 9660 Extensions: RRIP_1991AApr 20 22:16:31 ubuntu kernel: [17179581.620000] loop: loaded (max 8 devices)
Apr 20 22:16:31 ubuntu kernel: [17179581.644000] Registering unionfs 1.1.2
Apr 20 22:16:31 ubuntu kernel: [17179581.700000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
Apr 20 22:16:31 ubuntu kernel: [17179629.928000] 8139too Fast Ethernet driver 0.9.27
Apr 20 22:16:31 ubuntu kernel: [17179629.932000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Apr 20 22:16:31 ubuntu kernel: [17179629.932000] eth0: RealTek RTL8139 at 0xf885c000, 00:15:e9:d9:f8:42, IRQ 11
Apr 20 22:16:31 ubuntu kernel: [17179629.932000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Apr 20 22:16:31 ubuntu kernel: [17179663.748000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr 20 22:16:31 ubuntu kernel: [17179664.828000] NET: Registered protocol family 17
Apr 20 22:16:31 ubuntu kernel: [17179667.072000] Linux agpgart interface v0.101 (c) Dave Jones
Apr 20 22:16:31 ubuntu kernel: [17179667.292000] agpgart: Detected an Intel 440BX Chipset.
Apr 20 22:16:31 ubuntu kernel: [17179667.296000] agpgart: AGP aperture is 64M @ 0xd8000000
Apr 20 22:16:31 ubuntu kernel: [17179667.480000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr 20 22:16:31 ubuntu kernel: [17179667.836000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Apr 20 22:16:31 ubuntu kernel: [17179667.836000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
Apr 20 22:16:31 ubuntu kernel: [17179668.300000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Apr 20 22:16:31 ubuntu kernel: [17179668.396000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
Apr 20 22:16:31 ubuntu kernel: [17179669.464000] Floppy drive(s): fd0 is 1.44M
Apr 20 22:16:31 ubuntu kernel: [17179669.484000] FDC 0 is a post-1991 82077
Apr 20 22:16:31 ubuntu kernel: [17179669.492000] logips2pp: Detected unknown logitech mouse model 0
Apr 20 22:16:31 ubuntu kernel: [17179669.524000] Real Time Clock Driver v1.12
Apr 20 22:16:31 ubuntu kernel: [17179669.580000] input: PC Speaker as /class/input/input1
Apr 20 22:16:31 ubuntu kernel: [17179669.852000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
Apr 20 22:16:31 ubuntu kernel: [17179669.896000] parport: PnPBIOS parport detected.
Apr 20 22:16:31 ubuntu kernel: [17179669.896000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Apr 20 22:16:31 ubuntu kernel: [17179670.692000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr 20 22:16:31 ubuntu kernel: [17179670.740000] ts: Compaq touchscreen protocol output
Apr 20 22:16:31 ubuntu kernel: [17179671.980000] NET: Registered protocol family 10
Apr 20 22:16:31 ubuntu kernel: [17179671.980000] lo: Disabled Privacy ExtensionsApr 20 22:16:31 ubuntu kernel: [17179671.980000] IPv6 over IPv4 tunneling driverApr 20 22:16:31 ubuntu kernel: [17179673.564000] Adding 2104472k swap on /dev/hde5. Priority:-1 extents:1 across:2104472k
Apr 20 22:16:31 ubuntu kernel: [17179674.260000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Apr 20 22:16:31 ubuntu kernel: [17179674.260000] md: bitmap version 4.39
Apr 20 22:16:31 ubuntu kernel: [17179674.760000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
Apr 20 22:16:31 ubuntu kernel: [17179682.804000] eth0: no IPv6 routers present
Apr 20 22:16:31 ubuntu kernel: [17179685.692000] ACPI: Power Button (FF) [PWRF]
Apr 20 22:16:31 ubuntu kernel: [17179685.692000] ACPI: Power Button (CM) [PWRB]
Apr 20 22:16:31 ubuntu kernel: [17179685.920000] ibm_acpi: ec object not found
Apr 20 22:16:31 ubuntu kernel: [17179685.980000] pcc_acpi: loading...
Apr 20 22:16:36 ubuntu hpiod: 0.9.7 accepting connections at 50826...
Apr 20 22:16:38 ubuntu kernel: [17179694.956000] [drm] Initialized drm 1.0.1 20051102
Apr 20 22:16:38 ubuntu kernel: [17179695.316000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr 20 22:16:38 ubuntu kernel: [17179695.316000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
Apr 20 22:16:40 ubuntu kernel: [17179697.276000] agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
Apr 20 22:16:40 ubuntu kernel: [17179697.276000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
Apr 20 22:16:40 ubuntu kernel: [17179697.276000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
Apr 20 22:16:41 ubuntu kernel: [17179697.836000] [drm] Setting GART location based on new memory map
Apr 20 22:16:41 ubuntu kernel: [17179697.836000] [drm] writeback test succeeded in 1 usecs
Apr 20 22:16:42 ubuntu kernel: [17179699.556000] lp0: using parport0 (interrupt-driven).
Apr 20 22:16:42 ubuntu kernel: [17179699.612000] ppdev: user-space parallel port driver
Apr 20 22:16:44 ubuntu kernel: [17179701.004000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Apr 20 22:16:44 ubuntu kernel: [17179701.004000] apm: overridden by ACPI.
Apr 20 22:16:51 ubuntu hcid[5997]: Bluetooth HCI daemon
Apr 20 22:16:51 ubuntu kernel: [17179708.308000] Bluetooth: Core ver 2.8
Apr 20 22:16:51 ubuntu kernel: [17179708.308000] NET: Registered protocol family 31
Apr 20 22:16:51 ubuntu kernel: [17179708.308000] Bluetooth: HCI device and connection manager initialized
Apr 20 22:16:51 ubuntu kernel: [17179708.308000] Bluetooth: HCI socket layer initialized
Apr 20 22:16:51 ubuntu sdpd[6002]: Bluetooth SDP daemon
Apr 20 22:16:51 ubuntu kernel: [17179708.472000] Bluetooth: L2CAP ver 2.8
Apr 20 22:16:51 ubuntu kernel: [17179708.472000] Bluetooth: L2CAP socket layer initialized
Apr 20 22:16:52 ubuntu hcid[5997]: Can't get system message bus name: Connection ":1.1" is not allowed to own the service "org.bluez" due to security policies in the configuration file
Apr 20 22:16:52 ubuntu kernel: [17179708.700000] Bluetooth: RFCOMM socket layer initialized
Apr 20 22:16:52 ubuntu kernel: [17179708.700000] Bluetooth: RFCOMM TTY layer initialized
Apr 20 22:16:52 ubuntu kernel: [17179708.700000] Bluetooth: RFCOMM ver 1.7
Apr 20 22:16:54 ubuntu gconfd (ubuntu-6037): (Version 2.14.0) wird gestartet, Prozesskennung 6037, Benutzer »ubuntu«
Apr 20 22:16:54 ubuntu gconfd (ubuntu-6037): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 20 22:16:54 ubuntu gconfd (ubuntu-6037): Die Adresse »xml:readwrite:/home/ubuntu/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Apr 20 22:16:54 ubuntu gconfd (ubuntu-6037): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 20 22:16:54 ubuntu gconfd (ubuntu-6037): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 20 22:16:54 ubuntu gconfd (ubuntu-6037): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 20 22:16:54 ubuntu /usr/sbin/cron[6059]: (CRON) INFO (pidfile fd = 3)
Apr 20 22:16:54 ubuntu /usr/sbin/cron[6060]: (CRON) STARTUP (fork ok)
Apr 20 22:16:54 ubuntu /usr/sbin/cron[6060]: (CRON) INFO (Running @reboot jobs)
Apr 20 22:17:02 ubuntu /USR/SBIN/CRON[6265]: (root) CMD ( run-parts --report /etc/cron.hourly)
Apr 20 22:17:08 ubuntu gconfd (ubuntu-6037): Die Adresse »xml:readwrite:/home/ubuntu/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst
Apr 20 22:18:23 ubuntu localechooser: info: Locale has been preseeded to de
Apr 20 22:18:23 ubuntu localechooser: info: Set languagechooser/language-name = 'German'
Apr 20 22:18:23 ubuntu localechooser: info: Language input template is languagechooser/language-name
Apr 20 22:18:26 ubuntu localechooser: info: LANGNAME=German
Apr 20 22:18:26 ubuntu localechooser: info: line=German;1;de;de_DE.UTF-8;de;DE;de_DE:de:en_GB:en;kbd=lat0-sun16(utf8)
Apr 20 22:18:27 ubuntu localechooser: info: Set debian-installer/language = 'de_DE:de:en_GB:en'
Apr 20 22:18:27 ubuntu localechooser: info: Set debian-installer/locale = 'de'
Apr 20 22:18:27 ubuntu localechooser: info: Set debian-installer/fallbacklocale = 'de_DE.UTF-8'
Apr 20 22:18:27 ubuntu localechooser: info: Set debian-installer/country = 'DE'
Apr 20 22:18:27 ubuntu localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Apr 20 22:18:27 ubuntu localechooser: info: Set debconf/language = 'de_DE:de:en_GB:en'
Apr 20 22:18:27 ubuntu localechooser: info: Set countrychooser/country-name = 'Germany'
Apr 20 22:18:27 ubuntu localechooser: info: Set debian-installer/country = 'DE'
Apr 20 22:18:27 ubuntu localechooser: info: Set debian-installer/locale = 'de_DE.UTF-8'
Apr 20 22:18:27 ubuntu localechooser: info: Locale set successfully
Apr 20 22:18:27 ubuntu localechooser: info: Supported locales successfully set
Apr 20 22:18:38 ubuntu localechooser: info: Locale has been preseeded to de_DE.UTF-8
Apr 20 22:18:39 ubuntu localechooser: info: Set languagechooser/language-name = 'German'
Apr 20 22:18:39 ubuntu localechooser: info: Set countrychooser/shortlist-de = 'DE'
Apr 20 22:18:39 ubuntu localechooser: info: Set debian-installer/locale = 'de_DE.UTF-8'
Apr 20 22:18:39 ubuntu localechooser: info: Language input template is languagechooser/language-name
Apr 20 22:18:39 ubuntu localechooser: info: LANGNAME=German
Apr 20 22:18:39 ubuntu localechooser: info: line=German;1;de;de_DE.UTF-8;de;DE;de_DE:de:en_GB:en;kbd=lat0-sun16(utf8)
Apr 20 22:18:39 ubuntu localechooser: info: Set debian-installer/language = 'de_DE:de:en_GB:en'
Apr 20 22:18:39 ubuntu localechooser: info: Set debian-installer/locale = 'de'
Apr 20 22:18:39 ubuntu localechooser: info: Set debian-installer/fallbacklocale = 'de_DE.UTF-8'
Apr 20 22:18:39 ubuntu localechooser: info: Set debian-installer/country = 'DE'
Apr 20 22:18:39 ubuntu localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Apr 20 22:18:39 ubuntu localechooser: info: Set debconf/language = 'de_DE:de:en_GB:en'
Apr 20 22:18:39 ubuntu localechooser: info: Set countrychooser/country-name = 'Germany'
Apr 20 22:18:39 ubuntu localechooser: info: Set debian-installer/country = 'DE'
Apr 20 22:18:39 ubuntu localechooser: info: Set debian-installer/locale = 'de_DE.UTF-8'
Apr 20 22:18:39 ubuntu localechooser: info: Locale set successfully
Apr 20 22:18:42 ubuntu localechooser: info: Supported locales successfully set
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: DEBUG: Parsing /proc/bus/usb/devices
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: DEBUG: Adding generic entry for USB keymaps
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: keyboard type at: present: true:
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: keyboard type usb: present: unknown
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: Setting debian-installer/serial-console to false
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: Setting debian-installer/uml-console to false
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: default_keymap: have arch: at
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: default_keymap: check: at
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: keymap_ask: default map: de-latin1-nodeadkeys
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: keymap_ask: trans: de-latin1-nodeadkeys
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: kbd-chooser: arch at selected
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: default_keymap: have arch: at
Apr 20 22:18:44 ubuntu kbd-chooser[6562]: INFO: default_keymap: check: at
Apr 20 22:19:30 ubuntu kbd-chooser[6562]: INFO: choose_keymap: keymap = us
Apr 20 22:19:30 ubuntu kbd-chooser[6562]: INFO: kbd_chooser: setting keymap us
Apr 20 22:19:30 ubuntu kbd-chooser[6562]: INFO: default_keymap: have arch: at
Apr 20 22:19:30 ubuntu kbd-chooser[6562]: INFO: default_keymap: check: at
Apr 20 22:19:30 ubuntu kbd-chooser[6562]: INFO: keymap_ask: default map: us
Apr 20 22:19:30 ubuntu kbd-chooser[6562]: INFO: keymap_ask: trans: us
Apr 20 22:19:30 ubuntu kbd-chooser[6562]: INFO: kbd_chooser: setting keymap us
Apr 20 22:19:56 ubuntu kernel: [17179893.648000] NTFS driver 2.1.25 [Flags: R/O MODULE].
Apr 20 22:19:57 ubuntu kernel: [17179894.132000] JFS: nTxBlock = 8094, nTxLock = 64755
Apr 20 22:19:57 ubuntu kernel: [17179894.504000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
Apr 20 22:19:57 ubuntu kernel: [17179894.504000] SGI XFS Quota Management subsystem
Apr 20 22:21:19 ubuntu kernel: [17179976.076000] hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Apr 20 22:21:19 ubuntu kernel: [17179976.076000] hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
Apr 20 22:21:19 ubuntu kernel: [17179976.076000] ide: failed opcode was: unknownApr 20 22:22:40 ubuntu gconfd (root-7423): (Version 2.14.0) wird gestartet, Prozesskennung 7423, Benutzer »root«
Apr 20 22:22:40 ubuntu gconfd (root-7423): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 20 22:22:40 ubuntu gconfd (root-7423): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöstApr 20 22:22:40 ubuntu gconfd (root-7423): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 20 22:22:40 ubuntu gconfd (root-7423): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 20 22:22:40 ubuntu gconfd (root-7423): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 20 22:22:40 ubuntu gconfd (root-7423): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöstApr 20 22:23:09 ubuntu kernel: [17180086.136000] Adding 2104472k swap on /dev/hde5. Priority:-2 extents:1 across:2104472k
Apr 20 22:23:36 ubuntu kernel: [17180108.608000] hde: dma_timer_expiry: dma status == 0x60
Apr 20 22:23:36 ubuntu kernel: [17180108.608000] hde: DMA timeout retry
Apr 20 22:23:36 ubuntu kernel: [17180108.608000] PDC202XX: Primary channel reset.
Apr 20 22:23:36 ubuntu kernel: [17180108.608000] PDC202XX: Secondary channel reset.
Apr 20 22:23:36 ubuntu kernel: [17180112.776000] hde: timeout waiting for DMA
Apr 20 22:23:56 ubuntu kernel: [17180132.972000] hde: dma_timer_expiry: dma status == 0x61
Apr 20 22:24:06 ubuntu kernel: [17180142.972000] hde: DMA timeout error
Apr 20 22:24:06 ubuntu kernel: [17180142.972000] hde: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Apr 20 22:24:06 ubuntu kernel: [17180142.972000] ide: failed opcode was: unknownApr 20 22:24:26 ubuntu kernel: [17180163.004000] hde: dma_timer_expiry: dma status == 0x61
Apr 20 22:24:36 ubuntu kernel: [17180173.004000] hde: DMA timeout error
Apr 20 22:24:36 ubuntu kernel: [17180173.004000] hde: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Apr 20 22:24:36 ubuntu kernel: [17180173.004000] ide: failed opcode was: unknownApr 20 22:24:56 ubuntu kernel: [17180193.036000] hde: dma_timer_expiry: dma status == 0x61
Apr 20 22:25:06 ubuntu kernel: [17180203.036000] hde: DMA timeout error
Apr 20 22:25:06 ubuntu kernel: [17180203.036000] hde: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Apr 20 22:25:06 ubuntu kernel: [17180203.036000] ide: failed opcode was: unknownApr 20 22:26:01 ubuntu kernel: [17180233.076000] hde: irq timeout: status=0xd0 { Busy }
Apr 20 22:26:01 ubuntu kernel: [17180233.076000] ide: failed opcode was: unknownApr 20 22:26:01 ubuntu kernel: [17180233.076000] PDC202XX: Primary channel reset.
Apr 20 22:26:01 ubuntu kernel: [17180233.076000] PDC202XX: Secondary channel reset.
Apr 20 22:26:01 ubuntu kernel: [17180237.244000] ide2: reset: master: error (0x00?)
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] BUG: soft lockup detected on CPU#0!
Apr 20 22:26:01 ubuntu kernel: [17180252.980000]
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] Pid: 97, comm: pdflush
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] EIP: 0060:[ide_intr+199/512] CPU: 0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] EIP is at ide_intr+0xc7/0x200
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] EFLAGS: 00000292 Not tainted (2.6.15-26-386)
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] EAX: 00000001 EBX: 00000000 ECX: c03fe9e0 EDX: c041d1cc
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] ESI: c041d1cc EDI: dfe85080 EBP: 00000292 DS: 007b ES: 007b
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] CR0: 8005003b CR2: b74ef000 CR3: 25b3f000 CR4: 00000690
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [task_out_intr+0/256] task_out_intr+0x0/0x100
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [handle_IRQ_event+53/112] handle_IRQ_event+0x35/0x70
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [__do_IRQ+115/224] __do_IRQ+0x73/0xe0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [do_IRQ+26/48] do_IRQ+0x1a/0x30
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [common_interrupt+26/32] common_interrupt+0x1a/0x20
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [pg0+944104853/1069368320] ehci_hub_status_data+0x55/0x160 [ehci_hcd]
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [pg0+944239536/1069368320] rh_timer_func+0x0/0x10 [usbcore]
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [pg0+944239221/1069368320] usb_hcd_poll_rh_status+0x35/0x170 [usbcore]
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [pg0+944239536/1069368320] rh_timer_func+0x0/0x10 [usbcore]
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [pg0+944239536/1069368320] rh_timer_func+0x0/0x10 [usbcore]
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [run_timer_softirq+182/464] run_timer_softirq+0xb6/0x1d0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [__do_softirq+79/176] __do_softirq+0x4f/0xb0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [do_softirq+53/64] do_softirq+0x35/0x40
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [irq_exit+53/64] irq_exit+0x35/0x40
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [do_IRQ+31/48] do_IRQ+0x1f/0x30
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [common_interrupt+26/32] common_interrupt+0x1a/0x20
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [schedule+838/1680] schedule+0x346/0x690
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [schedule_timeout+67/176] schedule_timeout+0x43/0xb0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [process_timeout+0/16] process_timeout+0x0/0x10
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [io_schedule_timeout+17/32] io_schedule_timeout+0x11/0x20
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [blk_congestion_wait+115/144] blk_congestion_wait+0x73/0x90
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [autoremove_wake_function+0/64] autoremove_wake_function+0x0/0x40
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [background_writeout+57/192] background_writeout+0x39/0xc0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [__pdflush+225/432] __pdflush+0xe1/0x1b0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [pdflush+0/48] pdflush+0x0/0x30
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [pdflush+30/48] pdflush+0x1e/0x30
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [background_writeout+0/192] background_writeout+0x0/0xc0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [kthread+147/160] kthread+0x93/0xa0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [kthread+0/160] kthread+0x0/0xa0
Apr 20 22:26:01 ubuntu kernel: [17180252.980000] [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Apr 20 22:26:58 ubuntu kernel: [17180315.380000] kjournald starting. Commit interval 5 seconds
Apr 20 22:26:58 ubuntu kernel: [17180315.380000] EXT3 FS on hde6, internal journal
Apr 20 22:26:58 ubuntu kernel: [17180315.380000] EXT3-fs: mounted filesystem with ordered data mode.
Apr 20 22:30:56 ubuntu kernel: [17180553.572000] EXT3-fs error (device hde6): ext3_new_block: Allocating block in system zone - block = 65536
Apr 20 22:30:56 ubuntu kernel: [17180553.572000] Aborting journal on device hde6.
Apr 20 22:31:01 ubuntu kernel: [17180555.120000] ext3_abort called.
Apr 20 22:31:01 ubuntu kernel: [17180555.120000] EXT3-fs error (device hde6): ext3_journal_start_sb: Detected aborted journal
Apr 20 22:31:01 ubuntu kernel: [17180555.120000] Remounting filesystem read-onlyApr 20 22:31:03 ubuntu kernel: [17180560.272000] __journal_remove_journal_head: freeing b_committed_data
Apr 20 22:47:03 ubuntu gconfd (root-7423): Der GConf-Server wird nicht verwendet und daher beendet.
Apr 20 22:47:04 ubuntu gconfd (root-7423): Beenden

partman:

partitioning finished ok,
the list is here:
Model: SAMSUNG SP0812N
Path: /dev/hde
Sector size: 512
Sectors: 156368016
Sectors/track: 63
Heads: 255
Cylinders: 9733
Partition table: yes
Type: msdos
Partitions: # id length type fs path name
(0,0,0) (0,0,62) -1 0-32255 32256 primary label /dev/hde-1
(0,1,0) (1274,254,62) 1 32256-10487231999 10487199744 primary
ntfs /dev/hde1
(1275,0,0) (3335,254,62) 2 10487232000-27439534079 16952302080
primary extended /dev/hde2
(1275,0,0) (1275,0,62) -1 10487232000-10487264255 32256 logical
label /dev/hde-1
(1275,1,0) (1536,254,62) 5 10487264256-12642255359 2154991104
logical linux-swap /dev/hde5
(1537,0,0) (1548,254,62) -1 12642255360-12740958719 98703360
logical free /dev/hde-1
(1549,0,0) (1549,0,62) -1 12740958720-12740990975 32256 logical
label /dev/hde-1
(1549,1,0) (3335,254,62) 6 12740990976-27439534079 14698543104
logical ext3 /dev/hde6
(3336,0,0) (9732,254,62) -1 27439534080-80056650239 52617116160
pri/log free /dev/hde-1
(9733,0,0) (9733,116,62) -1 80056650240-80060424191 3773952 primary
label /dev/hde-1
Dump finished.
/lib/partman/init.d/70update_partitions: *******************************************************
/lib/partman/init.d/70update_partitions: IN: PARTITIONS =dev=hde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-10487231999 10487199744 primary ntfs
/dev/hde1

parted_server: OUT: 5 10487264256-12642255359 2154991104 logical linux-swap /dev/hde5

parted_server: OUT: -1 12642255360-12740958719 98703360 logical free
/dev/hde-1

parted_server: OUT: 6 12740990976-27439534079 14698543104 logical ext3
/dev/hde6

parted_server: OUT: -1 27439534080-80056650239 52617116160 pri/log free
/dev/hde-1

parted_server: Partitions printed
parted_server: OUT:

Regards,
Peter

[Colin Watson (cjwatson)]

The fact that the installer crashed in response to this is fixed in Ubuntu 7.04, but there's a kernel bug trace in the syslog that the kernel team should investigate. Reassigning.

[Launchpad Janitor (janitor)]

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this linux-source-2.6.15 kernel bug to the new "linux" package. We appreciate your patience and understanding as we make this transition. Also, if you would be interested in testing the upcoming Intrepid Ibex 8.10 release, it is available at http://www.ubuntu.com/testing . Please let us know your results. Thanks!

[Leann Ogasawara (leannogasawara)]

The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:

1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to install and test.

--or--

2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD.

Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.

[Brad Figg (brad-figg)]

This bug was filed against a series that is no longer supported and so is being marked as Won't Fix. If this issue still exists in supported series, please file a new bug.