Linux version 2.6.22-10-generic (buildd@palmer) (gcc version 4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 SMP Wed Aug 22 08:11:52 GMT 2007 (Ubuntu 2.6.22-10.30-generic) BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000018000000 (usable) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 384MB LOWMEM available. Entering add_active_range(0, 0, 98304) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 98304 HighMem 98304 -> 98304 early_node_map[1] active PFN ranges 0: 0 -> 98304 On node 0 totalpages: 98304 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 736 pages used for memmap Normal zone: 93472 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI not present or invalid. ACPI: RSDP 000E8000, 0014 (r0 QEMU ) ACPI: RSDT 000E8024, 002C (r0 QEMU QEMURSDT 1 QEMU 1) ACPI: FACP 000E8050, 0074 (r0 QEMU QEMUFACP 1 QEMU 1) ACPI: DSDT 000E8140, 0832 (r1 QEMU QEMUDSDT 1 INTL 20060421) ACPI: FACS 000E8100, 0040 ACPI: APIC 000E8978, 0040 (r0 QEMU QEMUAPIC 1 QEMU 1) ACPI: no DMI BIOS year, acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 20000000 (gap: 18000000:e7fc0000) Built 1 zonelists. Total pages: 97536 Kernel command line: root=UUID=25d3f8bd-36f3-41d6-9b9d-9e177bdee8c9 ro quiet splash Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1667.096 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 378004k/393216k available (2010k kernel code, 14672k reserved, 917k data, 364k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB) lowmem : 0xc0000000 - 0xd8000000 ( 384 MB) .init : 0xc03e1000 - 0xc043c000 ( 364 kB) .data : 0xc02f69c6 - 0xc03dbe64 ( 917 kB) .text : 0xc0100000 - 0xc02f69c6 (2010 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 3371.99 BogoMIPS (lpj=6743990) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0781abfd 00000000 00000000 00000000 00000009 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: 0781abfd 00000000 00000000 00000040 00000009 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed Early unpacking initramfs... done CPU0: Intel Pentium II (Klamath) stepping 03 SMP motherboard not detected. Brought up 1 CPUs Booting paravirtualized kernel on bare hardware Time: 0:26:08 Date: 09/10/107 NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf9fa0, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: PnP BIOS support was not detected. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region b000-b03f claimed by PIIX4 ACPI PCI: Using IRQ router PIIX/ICH [8086/7000] at 0000:00:01.0 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 PCI: BIOS reporting unknown device 01:00 NET: Registered protocol family 8 NET: Registered protocol family 20 Time: tsc clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs...<4>Clocksource tsc unstable (delta = 92018255 ns) Time: pit clocksource has been installed. it is Freeing initrd memory: 7332k freed audit: initializing netlink socket (disabled) audit(1191975974.956:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Activating ISA DMA hang workarounds. Boot video device is 0000:00:02.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 EISA: Probing bus 0 at eisa.0 EISA: Detected 0 cards. TCP cubic registered NET: Registered protocol family 1 Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! Using IPI No-Shortcut mode Magic number: 11:146:405 Freeing unused kernel memory: 364k freed AppArmor: AppArmor initialized audit(1191975979.457:2): AppArmor initialized AppArmor: Registered secondary security module: capability. Capability LSM initialized as secondary thermal: Unknown symbol acpi_processor_set_thermal_limit SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:01.1: version 2.11 PCI: Setting latency timer of device 0000:00:01.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001c000 irq 14 ata2: PATA max MWDMA2 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001c008 irq 15 ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker ata1.00: ATA-7: QEMU HARDDISK, 0.8.2, max UDMA/100 ata1.00: 8388608 sectors, multi 16: LBA48 ata1.00: configured for MWDMA2 ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max MWDMA1 ata2.00: configured for MWDMA1 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.8. PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.8. PQ: 0 ANSI: 5 PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:03.0 eth0: RealTek RTL-8029 found at 0xc100, IRQ 10, 52:54:00:12:34:56. sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port Attempting manual resume swsusp: Resume From Partition 8:5 PM: Checking swsusp image. PM: Resume from disk failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 48/01:02:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 48/01:02:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 48/01:02:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in res 48/01:02:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port NET: Registered protocol family 17 ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete sr 1:0:0:0: ioctl_internal_command return code = 8000002 : Sense Key : Aborted Command [current] [descriptor] : Add. Sense: No additional sense information ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete sr 1:0:0:0: ioctl_internal_command return code = 8000002 : Sense Key : Aborted Command [current] [descriptor] : Add. Sense: No additional sense information piix4_smbus 0000:00:01.3: Found 0000:00:01.3 device piix4_smbus 0000:00:01.3: SMB base address uninitialized - upgrade BIOS or use force_addr=0xaddr input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 fuse init (API version 7.8) parport0: PC-style at 0x378 [PCSPP,EPP] lp0: using parport0 (polling). Adding 240932k swap on /dev/sda5. Priority:-1 extents:1 across:240932k EXT3 FS on sda1, internal journal NET: Registered protocol family 10 lo: Disabled Privacy Extensions AppArmor: Unregistered secondary security module: capability eth0: no IPv6 routers present acpi_cpufreq: Unknown symbol acpi_processor_notify_smm acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance acpi_cpufreq: Unknown symbol acpi_processor_register_performance ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete sr 1:0:0:0: ioctl_internal_command return code = 8000002 : Sense Key : Aborted Command [current] [descriptor] : Add. Sense: No additional sense information ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00 sr: Sense Key : Aborted Command [current] [descriptor] sr: Add. Sense: No additional sense information ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ppdev: user-space parallel port driver ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port audit(1191950876.682:3): REJECTING m access to /etc/passwd (cupsd(4174) profile /usr/sbin/cupsd active /usr/sbin/cupsd) audit(1191950876.682:4): REJECTING m access to /etc/group (cupsd(4174) profile /usr/sbin/cupsd active /usr/sbin/cupsd) audit(1191950876.682:5): REJECTING m access to /etc/group (cupsd(4174) profile /usr/sbin/cupsd active /usr/sbin/cupsd) audit(1191950877.182:6): REJECTING w access to /dev/tty (cupsd(4174) profile /usr/sbin/cupsd active /usr/sbin/cupsd) ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) ata2.00: configured for MWDMA1 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0 res 41/20:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA1 ata2: EH complete sr 1:0:0:0: ioctl_internal_command return code = 8000002 : Sense Key : Aborted Command [current] [descriptor] : Add. Sense: No additional sense information AppArmor: Registered secondary security module: capability. Capability LSM initialized as secondary Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: cmd e3/00:f4:00:00:00/00:00:00:00:00/40 tag 0 cdb 0x0 data 0 res 41/04:f4:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) ata1.00: configured for MWDMA2 ata1: EH complete sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA