shadows@shadows-ThinkPad-Z60t:~$ sudo hp-setup [sudo] password for shadows: HP Linux Imaging and Printing System (ver. 3.10.6) Printer/Fax Setup Utility ver. 9.0 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Searching... (bus=usb, search=(None), desc=0) / Done. shadows@shadows-ThinkPad-Z60t:~$ sudo hp-check -r HP Linux Imaging and Printing System (ver. 3.10.6) Dependency/Version Check Utility ver. 14.3 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux shadows-ThinkPad-Z60t 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 10:18:49 UTC 2010 i686 GNU/Linux Distribution: ubuntu 10.10 Checking Python version... OK, version 2.6.6 installed Checking PyQt 4.x version... OK, version 4.7.4 installed. Checking for CUPS... Status: scheduler is running warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.) error_log is set to level: warn Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.83.0 ------------------------ | RUNTIME DEPENDENCIES | ------------------------ Checking for dependency: CUPS - Common Unix Printing System... OK, found. Checking for dependency: CUPS DDK - CUPS driver development kit... warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: PolicyKit - Administrative policy framework... OK, found. Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... OK, found. Checking for dependency: Python DBus - Python bindings for DBus... OK, found. Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications... OK, found. Checking for dependency: Python XML libraries... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... OK, found. Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 3.10.6 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.10.6 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.10.6.15 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes hpijs-only-build=no lite-build=no udev-acl-rules=yes hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: [plugin] eula = 1 installed = 1 Current contents of '~/.hplip/hplip.conf' file: [last_used] printer_name=HP-Fax-3 working_dir=. device_uri="hpfax:/usb/HP_LaserJet_Professional_M1212nf_MFP?serial=000000000QJ21FG5PR1a" [commands] scan=/usr/bin/simple-scan %SANE_URI% [settings] systray_messages=0 systray_visible=0 [fax] email_address= voice_phone= [refresh] rate=30 enable=false type=1 [polling] enable=false device_list= interval=5 -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------- -------------------------------- hp:/usb/HP_LaserJet_Professional HP LaserJet Professional M1212nf _M1212nf_MFP?serial=000000000QJ2 MFP 1FG5PR1a --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP_LaserJet_Professional_M1212nf_MFP ------------------------------------ Type: Printer Device URI: hp:/usb/HP_LaserJet_Professional_M1212nf_MFP?serial=000000000QJ21FG5PR1a PPD: /etc/cups/ppd/HP_LaserJet_Professional_M1212nf_MFP.ppd PPD Description: HP LaserJet Professional m1212nf MFP, hpcups 3.10.6 Printer status: printer HP_LaserJet_Professional_M1212nf_MFP is idle. enabled since Tueready to print0:21:02 AM CST Required plug-in status: Installed Communication status: Good HP_LaserJet_Professional_M1212nf_MFP_fax ---------------------------------------- Type: Fax Device URI: hpfax:/usb/HP_LaserJet_Professional_M1212nf_MFP?serial=000000000QJ21FG5PR1a PPD: /etc/cups/ppd/HP_LaserJet_Professional_M1212nf_MFP_fax.ppd PPD Description: HP Fax3 hpcups Printer status: printer HP_LaserJet_Professional_M1212nf_MFP_fax is idle. enabled since Tue 21 Dec 2010 10:20:06 AM CST Required plug-in status: Installed Communication status: Good ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... 'hpaio' in '/etc/sane.d/dll.d/hplip'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... device `hpaio:/usb/HP_LaserJet_Professional_M1212nf_MFP?serial=000000000QJ21FG5PR1a' is a Hewlett-Packard HP_LaserJet_Professional_M1212nf_MFP all-in-one --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... OK, found. ----------------- | USB I/O SETUP | ----------------- Checking for permissions of USB attached printers... HP Device 0x52a at 001:003: Device URI: hp:/usb/HP_LaserJet_Professional_M1212nf_MFP?serial=000000000QJ21FG5PR1a Device node: /dev/bus/usb/001/003 Mode: 0664 --------------- | USER GROUPS | --------------- root error: User needs to be member of group 'lp' to enable print, scan & fax. error: User needs to be member of group 'lpadmin' to manage printers. ----------- | SUMMARY | ----------- error: 1 error or warning. Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html Done. shadows@shadows-ThinkPad-Z60t:~$