chan()====ch:13
[ 9506.684464] ===>rtllib_start_scan()
[ 9506.684516] =====>rtl8192_set_chan()====ch:2
[ 9506.694659] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9506.694713] ===>rtllib_associate_procedure_wq(), chan:1
[ 9506.694721] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9506.694730] =====>rtl8192_set_chan()====ch:1
[ 9506.704844] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9506.705511] ===>rtllib_associate_procedure_wq(), chan:1
[ 9506.705517] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9506.705523] =====>rtl8192_set_chan()====ch:1
[ 9506.717331] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9506.721258] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9506.721266] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9506.721272] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9506.721278] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9506.721283] Associated successfully
[ 9506.721287] normal associate
[ 9506.721301] Using G rates:108
[ 9506.721305] Successfully associated, ht not enabled(0, 0)
[ 9506.721311] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9506.721321] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9506.722815] RX: IEEE802.1X EAPOL frame!
[ 9506.731641] RX: IEEE802.1X EAPOL frame!
[ 9506.731805] alg name:TKIP
[ 9506.732446] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9506.736939] RX: IEEE802.1X EAPOL frame!
[ 9506.737040] alg name:TKIP
[ 9506.737657] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9527.788852] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9527.788859] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9527.788863] ====>remove Tx_TS_admin_list
[ 9527.788866] ====>remove Tx_TS_admin_list
[ 9527.788873] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9527.788886] notify_wx_assoc_event(): Tell user space disconnected
[ 9527.889287] =====>rtl8192_set_chan()====ch:1
[ 9528.008245] =====>rtl8192_set_chan()====ch:2
[ 9528.128107] =====>rtl8192_set_chan()====ch:3
[ 9528.248056] =====>rtl8192_set_chan()====ch:4
[ 9528.367972] =====>rtl8192_set_chan()====ch:5
[ 9528.487879] =====>rtl8192_set_chan()====ch:6
[ 9528.607793] =====>rtl8192_set_chan()====ch:7
[ 9528.727752] =====>rtl8192_set_chan()====ch:8
[ 9528.847631] =====>rtl8192_set_chan()====ch:9
[ 9528.967539] =====>rtl8192_set_chan()====ch:10
[ 9529.087564] =====>rtl8192_set_chan()====ch:11
[ 9529.207433] =====>rtl8192_set_chan()====ch:12
[ 9529.327282] =====>rtl8192_set_chan()====ch:13
[ 9529.448510] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9529.448596] ===>rtllib_associate_procedure_wq(), chan:1
[ 9529.448607] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9529.448616] =====>rtl8192_set_chan()====ch:1
[ 9529.459455] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9529.459479] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9529.460474] ===>rtllib_associate_procedure_wq(), chan:1
[ 9529.460480] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9529.460485] =====>rtl8192_set_chan()====ch:1
[ 9529.474241] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9529.478185] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9529.478192] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9529.478198] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9529.478203] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9529.478208] Associated successfully
[ 9529.478212] normal associate
[ 9529.478224] Using G rates:108
[ 9529.478228] Successfully associated, ht not enabled(0, 0)
[ 9529.478235] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9529.478244] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9529.479657] RX: IEEE802.1X EAPOL frame!
[ 9529.485480] RX: IEEE802.1X EAPOL frame!
[ 9529.485696] alg name:TKIP
[ 9529.486351] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9529.492786] RX: IEEE802.1X EAPOL frame!
[ 9529.493159] alg name:TKIP
[ 9529.493775] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9540.805923] ==========>received disassoc/deauth(c0) frame, reason code:a
[ 9540.805956] notify_wx_assoc_event(): Tell user space disconnected
[ 9540.805966] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9540.805969] ====>remove Tx_TS_admin_list
[ 9540.805973] ====>remove Tx_TS_admin_list
[ 9540.806014] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9540.907138] =====>rtl8192_set_chan()====ch:1
[ 9541.018883] =====>rtl8192_set_chan()====ch:2
[ 9541.138693] =====>rtl8192_set_chan()====ch:3
[ 9541.258694] =====>rtl8192_set_chan()====ch:4
[ 9541.378581] =====>rtl8192_set_chan()====ch:5
[ 9541.498558] =====>rtl8192_set_chan()====ch:6
[ 9541.618470] =====>rtl8192_set_chan()====ch:7
[ 9541.738319] =====>rtl8192_set_chan()====ch:8
[ 9541.858231] =====>rtl8192_set_chan()====ch:9
[ 9541.978139] =====>rtl8192_set_chan()====ch:10
[ 9542.098051] =====>rtl8192_set_chan()====ch:11
[ 9542.217956] =====>rtl8192_set_chan()====ch:12
[ 9542.337869] =====>rtl8192_set_chan()====ch:13
[ 9542.459412] ===>rtllib_start_scan()
[ 9542.459446] =====>rtl8192_set_chan()====ch:2
[ 9542.469592] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9542.469663] ===>rtllib_associate_procedure_wq(), chan:1
[ 9542.469672] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9542.469680] =====>rtl8192_set_chan()====ch:1
[ 9542.479801] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9542.480534] ===>rtllib_associate_procedure_wq(), chan:1
[ 9542.480540] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9542.480545] =====>rtl8192_set_chan()====ch:1
[ 9542.492332] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9542.496291] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9542.496296] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9542.496299] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9542.496302] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9542.496306] Associated successfully
[ 9542.496308] normal associate
[ 9542.496317] Using G rates:108
[ 9542.496319] Successfully associated, ht not enabled(0, 0)
[ 9542.496323] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9542.496330] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9542.497781] RX: IEEE802.1X EAPOL frame!
[ 9542.504545] RX: IEEE802.1X EAPOL frame!
[ 9542.504749] alg name:TKIP
[ 9542.505450] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9542.509788] RX: IEEE802.1X EAPOL frame!
[ 9542.509953] alg name:TKIP
[ 9542.510570] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9543.109591] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9543.167289] =====>rtl8192_set_chan()====ch:1
[ 9543.287177] =====>rtl8192_set_chan()====ch:2
[ 9543.407089] =====>rtl8192_set_chan()====ch:3
[ 9543.527001] =====>rtl8192_set_chan()====ch:4
[ 9543.646896] =====>rtl8192_set_chan()====ch:5
[ 9543.766821] =====>rtl8192_set_chan()====ch:6
[ 9543.886766] =====>rtl8192_set_chan()====ch:7
[ 9544.006652] =====>rtl8192_set_chan()====ch:8
[ 9544.126568] =====>rtl8192_set_chan()====ch:9
[ 9544.246490] =====>rtl8192_set_chan()====ch:10
[ 9544.366409] =====>rtl8192_set_chan()====ch:11
[ 9544.486321] =====>rtl8192_set_chan()====ch:12
[ 9544.606229] =====>rtl8192_set_chan()====ch:13
[ 9544.726210] =====>rtl8192_set_chan()====ch:1
[ 9544.736396] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9544.736411] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9561.764153] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9561.764160] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9561.764164] ====>remove Tx_TS_admin_list
[ 9561.764168] ====>remove Tx_TS_admin_list
[ 9561.764174] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9561.764182] notify_wx_assoc_event(): Tell user space disconnected
[ 9561.864538] =====>rtl8192_set_chan()====ch:1
[ 9561.983679] =====>rtl8192_set_chan()====ch:2
[ 9562.103668] =====>rtl8192_set_chan()====ch:3
[ 9562.223505] =====>rtl8192_set_chan()====ch:4
[ 9562.343433] =====>rtl8192_set_chan()====ch:5
[ 9562.463299] =====>rtl8192_set_chan()====ch:6
[ 9562.583242] =====>rtl8192_set_chan()====ch:7
[ 9562.703192] =====>rtl8192_set_chan()====ch:8
[ 9562.823083] =====>rtl8192_set_chan()====ch:9
[ 9562.942993] =====>rtl8192_set_chan()====ch:10
[ 9563.062891] =====>rtl8192_set_chan()====ch:11
[ 9563.182858] =====>rtl8192_set_chan()====ch:12
[ 9563.302744] =====>rtl8192_set_chan()====ch:13
[ 9563.423243] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9563.423263] ===>rtllib_associate_procedure_wq(), chan:1
[ 9563.423267] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9563.423270] =====>rtl8192_set_chan()====ch:1
[ 9563.433698] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9563.433716] ===>rtllib_associate_procedure_wq(), chan:1
[ 9563.433728] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9563.433736] =====>rtl8192_set_chan()====ch:1
[ 9563.443849] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9563.444365] ===>rtllib_associate_procedure_wq(), chan:1
[ 9563.444370] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9563.444374] =====>rtl8192_set_chan()====ch:1
[ 9563.456208] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9563.460087] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9563.460093] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9563.460098] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9563.460103] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9563.460107] Associated successfully
[ 9563.460110] normal associate
[ 9563.460118] Using G rates:108
[ 9563.460121] Successfully associated, ht not enabled(0, 0)
[ 9563.460127] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9563.460135] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9563.461598] RX: IEEE802.1X EAPOL frame!
[ 9563.468823] RX: IEEE802.1X EAPOL frame!
[ 9563.468987] alg name:TKIP
[ 9563.469620] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9563.474046] RX: IEEE802.1X EAPOL frame!
[ 9563.474211] alg name:TKIP
[ 9563.474834] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9593.741161] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9593.741173] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9593.741179] ====>remove Tx_TS_admin_list
[ 9593.741185] ====>remove Tx_TS_admin_list
[ 9593.741194] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9593.741205] notify_wx_assoc_event(): Tell user space disconnected
[ 9593.841887] =====>rtl8192_set_chan()====ch:1
[ 9593.960579] =====>rtl8192_set_chan()====ch:2
[ 9594.080551] =====>rtl8192_set_chan()====ch:3
[ 9594.200388] =====>rtl8192_set_chan()====ch:4
[ 9594.320318] =====>rtl8192_set_chan()====ch:5
[ 9594.440288] =====>rtl8192_set_chan()====ch:6
[ 9594.560142] =====>rtl8192_set_chan()====ch:7
[ 9594.680063] =====>rtl8192_set_chan()====ch:8
[ 9594.799963] =====>rtl8192_set_chan()====ch:9
[ 9594.919895] =====>rtl8192_set_chan()====ch:10
[ 9595.039809] =====>rtl8192_set_chan()====ch:11
[ 9595.159739] =====>rtl8192_set_chan()====ch:12
[ 9595.279641] =====>rtl8192_set_chan()====ch:13
[ 9595.401066] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9595.401105] ===>rtllib_associate_procedure_wq(), chan:1
[ 9595.401114] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9595.401121] =====>rtl8192_set_chan()====ch:1
[ 9595.411696] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9595.411727] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9595.412408] ===>rtllib_associate_procedure_wq(), chan:1
[ 9595.412413] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9595.412417] =====>rtl8192_set_chan()====ch:1
[ 9595.424604] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9595.428548] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9595.428556] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9595.428562] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9595.428568] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9595.428573] Associated successfully
[ 9595.428577] normal associate
[ 9595.428586] Using G rates:108
[ 9595.428591] Successfully associated, ht not enabled(0, 0)
[ 9595.428597] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9595.428607] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9595.429990] RX: IEEE802.1X EAPOL frame!
[ 9595.437457] RX: IEEE802.1X EAPOL frame!
[ 9595.437713] alg name:TKIP
[ 9595.438353] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9595.442886] RX: IEEE802.1X EAPOL frame!
[ 9595.443255] alg name:TKIP
[ 9595.443869] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9621.721052] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9621.721060] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9621.721063] ====>remove Tx_TS_admin_list
[ 9621.721067] ====>remove Tx_TS_admin_list
[ 9621.721073] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9621.721085] notify_wx_assoc_event(): Tell user space disconnected
[ 9621.821610] =====>rtl8192_set_chan()====ch:1
[ 9621.940363] =====>rtl8192_set_chan()====ch:2
[ 9622.060364] =====>rtl8192_set_chan()====ch:3
[ 9622.180220] =====>rtl8192_set_chan()====ch:4
[ 9622.300136] =====>rtl8192_set_chan()====ch:5
[ 9622.419987] =====>rtl8192_set_chan()====ch:6
[ 9622.539982] =====>rtl8192_set_chan()====ch:7
[ 9622.659850] =====>rtl8192_set_chan()====ch:8
[ 9622.779757] =====>rtl8192_set_chan()====ch:9
[ 9622.899653] =====>rtl8192_set_chan()====ch:10
[ 9623.019576] =====>rtl8192_set_chan()====ch:11
[ 9623.139525] =====>rtl8192_set_chan()====ch:12
[ 9623.259405] =====>rtl8192_set_chan()====ch:13
[ 9623.380728] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9623.380754] ===>rtllib_associate_procedure_wq(), chan:1
[ 9623.380760] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9623.380765] =====>rtl8192_set_chan()====ch:1
[ 9623.391075] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9623.391113] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9623.391797] ===>rtllib_associate_procedure_wq(), chan:1
[ 9623.391801] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9623.391804] =====>rtl8192_set_chan()====ch:1
[ 9623.403677] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9623.407550] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9623.407558] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9623.407563] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9623.407569] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9623.407574] Associated successfully
[ 9623.407578] normal associate
[ 9623.407588] Using G rates:108
[ 9623.407593] Successfully associated, ht not enabled(0, 0)
[ 9623.407599] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9623.407608] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9623.409049] RX: IEEE802.1X EAPOL frame!
[ 9623.416320] RX: IEEE802.1X EAPOL frame!
[ 9623.416488] alg name:TKIP
[ 9623.417121] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9623.423007] RX: IEEE802.1X EAPOL frame!
[ 9623.423255] alg name:TKIP
[ 9623.423883] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9641.706622] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9641.706633] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9641.706639] ====>remove Tx_TS_admin_list
[ 9641.706645] ====>remove Tx_TS_admin_list
[ 9641.706655] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9641.706667] notify_wx_assoc_event(): Tell user space disconnected
[ 9641.807136] =====>rtl8192_set_chan()====ch:1
[ 9641.925855] =====>rtl8192_set_chan()====ch:2
[ 9642.045877] =====>rtl8192_set_chan()====ch:3
[ 9642.165770] =====>rtl8192_set_chan()====ch:4
[ 9642.285625] =====>rtl8192_set_chan()====ch:5
[ 9642.405604] =====>rtl8192_set_chan()====ch:6
[ 9642.525497] =====>rtl8192_set_chan()====ch:7
[ 9642.645445] =====>rtl8192_set_chan()====ch:8
[ 9642.765318] =====>rtl8192_set_chan()====ch:9
[ 9642.885252] =====>rtl8192_set_chan()====ch:10
[ 9643.005201] =====>rtl8192_set_chan()====ch:11
[ 9643.125062] =====>rtl8192_set_chan()====ch:12
[ 9643.244967] =====>rtl8192_set_chan()====ch:13
[ 9643.366073] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9643.366098] ===>rtllib_associate_procedure_wq(), chan:1
[ 9643.366104] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9643.366109] =====>rtl8192_set_chan()====ch:1
[ 9643.376294] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9643.376325] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9643.376530] ===>rtllib_associate_procedure_wq(), chan:1
[ 9643.376536] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9643.376540] =====>rtl8192_set_chan()====ch:1
[ 9643.388361] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9643.395709] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9643.395717] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9643.395722] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9643.395728] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9643.395733] Associated successfully
[ 9643.395737] normal associate
[ 9643.395747] Using G rates:108
[ 9643.395752] Successfully associated, ht not enabled(0, 0)
[ 9643.395758] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9643.395768] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9643.397283] RX: IEEE802.1X EAPOL frame!
[ 9643.402853] RX: IEEE802.1X EAPOL frame!
[ 9643.403025] alg name:TKIP
[ 9643.403690] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9643.410203] RX: IEEE802.1X EAPOL frame!
[ 9643.410338] alg name:TKIP
[ 9643.410953] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9657.694913] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9657.694921] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9657.694924] ====>remove Tx_TS_admin_list
[ 9657.694928] ====>remove Tx_TS_admin_list
[ 9657.694934] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9657.694946] notify_wx_assoc_event(): Tell user space disconnected
[ 9657.795411] =====>rtl8192_set_chan()====ch:1
[ 9657.914360] =====>rtl8192_set_chan()====ch:2
[ 9658.034330] =====>rtl8192_set_chan()====ch:3
[ 9658.154144] =====>rtl8192_set_chan()====ch:4
[ 9658.274093] =====>rtl8192_set_chan()====ch:5
[ 9658.394013] =====>rtl8192_set_chan()====ch:6
[ 9658.513987] =====>rtl8192_set_chan()====ch:7
[ 9658.633848] =====>rtl8192_set_chan()====ch:8
[ 9658.753760] =====>rtl8192_set_chan()====ch:9
[ 9658.873782] =====>rtl8192_set_chan()====ch:10
[ 9658.993585] =====>rtl8192_set_chan()====ch:11
[ 9659.113466] =====>rtl8192_set_chan()====ch:12
[ 9659.233420] =====>rtl8192_set_chan()====ch:13
[ 9659.354822] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9659.354863] ===>rtllib_associate_procedure_wq(), chan:1
[ 9659.354873] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9659.354882] =====>rtl8192_set_chan()====ch:1
[ 9659.365300] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9659.365337] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9659.366317] ===>rtllib_associate_procedure_wq(), chan:1
[ 9659.366323] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9659.366328] =====>rtl8192_set_chan()====ch:1
[ 9659.378426] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9659.382387] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9659.382394] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9659.382399] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9659.382405] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9659.382410] Associated successfully
[ 9659.382414] normal associate
[ 9659.382424] Using G rates:108
[ 9659.382428] Successfully associated, ht not enabled(0, 0)
[ 9659.382434] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9659.382444] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9659.383873] RX: IEEE802.1X EAPOL frame!
[ 9659.391473] RX: IEEE802.1X EAPOL frame!
[ 9659.391720] alg name:TKIP
[ 9659.392369] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9659.397268] RX: IEEE802.1X EAPOL frame!
[ 9659.397832] alg name:TKIP
[ 9659.398470] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9664.023032] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9664.080893] =====>rtl8192_set_chan()====ch:1
[ 9664.199810] =====>rtl8192_set_chan()====ch:2
[ 9664.319713] =====>rtl8192_set_chan()====ch:3
[ 9664.439871] =====>rtl8192_set_chan()====ch:4
[ 9664.559603] =====>rtl8192_set_chan()====ch:5
[ 9664.679472] =====>rtl8192_set_chan()====ch:6
[ 9664.799436] =====>rtl8192_set_chan()====ch:7
[ 9664.919290] =====>rtl8192_set_chan()====ch:8
[ 9665.039197] =====>rtl8192_set_chan()====ch:9
[ 9665.159140] =====>rtl8192_set_chan()====ch:10
[ 9665.279042] =====>rtl8192_set_chan()====ch:11
[ 9665.399129] =====>rtl8192_set_chan()====ch:12
[ 9665.518869] =====>rtl8192_set_chan()====ch:13
[ 9665.638831] =====>rtl8192_set_chan()====ch:1
[ 9665.649085] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9665.649096] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9673.619061] ==========>received disassoc/deauth(c0) frame, reason code:a
[ 9673.619083] notify_wx_assoc_event(): Tell user space disconnected
[ 9673.619098] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9673.619103] ====>remove Tx_TS_admin_list
[ 9673.619109] ====>remove Tx_TS_admin_list
[ 9673.619401] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9673.863377] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9673.863984] =====>rtl8192_set_chan()====ch:1
[ 9673.982782] =====>rtl8192_set_chan()====ch:2
[ 9674.102690] =====>rtl8192_set_chan()====ch:3
[ 9674.222580] =====>rtl8192_set_chan()====ch:4
[ 9674.342473] =====>rtl8192_set_chan()====ch:5
[ 9674.462480] =====>rtl8192_set_chan()====ch:6
[ 9674.582365] =====>rtl8192_set_chan()====ch:7
[ 9674.702348] =====>rtl8192_set_chan()====ch:8
[ 9674.822203] =====>rtl8192_set_chan()====ch:9
[ 9674.942121] =====>rtl8192_set_chan()====ch:10
[ 9675.061990] =====>rtl8192_set_chan()====ch:11
[ 9675.181933] =====>rtl8192_set_chan()====ch:12
[ 9675.301804] =====>rtl8192_set_chan()====ch:13
[ 9675.422515] ===>rtllib_start_scan()
[ 9675.422564] =====>rtl8192_set_chan()====ch:2
[ 9675.432717] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9675.432782] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9675.433543] ===>rtllib_associate_procedure_wq(), chan:1
[ 9675.433550] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9675.433555] =====>rtl8192_set_chan()====ch:1
[ 9675.445928] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9675.449872] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9675.449879] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9675.449886] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9675.449891] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9675.449897] Associated successfully
[ 9675.449900] normal associate
[ 9675.449914] Using G rates:108
[ 9675.449919] Successfully associated, ht not enabled(0, 0)
[ 9675.449925] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9675.449934] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9675.451291] RX: IEEE802.1X EAPOL frame!
[ 9675.459842] RX: IEEE802.1X EAPOL frame!
[ 9675.460059] alg name:TKIP
[ 9675.460696] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9675.467333] RX: IEEE802.1X EAPOL frame!
[ 9675.467547] alg name:TKIP
[ 9675.468173] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9698.494940] ==========>received disassoc/deauth(c0) frame, reason code:a
[ 9698.494973] notify_wx_assoc_event(): Tell user space disconnected
[ 9698.494983] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9698.494986] ====>remove Tx_TS_admin_list
[ 9698.494990] ====>remove Tx_TS_admin_list
[ 9698.495029] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9698.596163] =====>rtl8192_set_chan()====ch:1
[ 9698.715081] =====>rtl8192_set_chan()====ch:2
[ 9698.834798] =====>rtl8192_set_chan()====ch:3
[ 9698.954711] =====>rtl8192_set_chan()====ch:4
[ 9699.074604] =====>rtl8192_set_chan()====ch:5
[ 9699.194525] =====>rtl8192_set_chan()====ch:6
[ 9699.314394] =====>rtl8192_set_chan()====ch:7
[ 9699.434374] =====>rtl8192_set_chan()====ch:8
[ 9699.554275] =====>rtl8192_set_chan()====ch:9
[ 9699.674155] =====>rtl8192_set_chan()====ch:10
[ 9699.794137] =====>rtl8192_set_chan()====ch:11
[ 9699.914056] =====>rtl8192_set_chan()====ch:12
[ 9700.033938] =====>rtl8192_set_chan()====ch:13
[ 9700.154989] ===>rtllib_start_scan()
[ 9700.155134] =====>rtl8192_set_chan()====ch:2
[ 9700.165294] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9700.165357] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9700.166246] ===>rtllib_associate_procedure_wq(), chan:1
[ 9700.166253] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9700.166259] =====>rtl8192_set_chan()====ch:1
[ 9700.178819] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9700.182756] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9700.182761] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9700.182765] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9700.182769] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9700.182773] Associated successfully
[ 9700.182776] normal associate
[ 9700.182786] Using G rates:108
[ 9700.182789] Successfully associated, ht not enabled(0, 0)
[ 9700.182794] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9700.182802] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9700.184230] RX: IEEE802.1X EAPOL frame!
[ 9700.192535] RX: IEEE802.1X EAPOL frame!
[ 9700.192802] alg name:TKIP
[ 9700.193451] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9700.199504] RX: IEEE802.1X EAPOL frame!
[ 9700.199675] alg name:TKIP
[ 9700.200301] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9715.028581] ==========>received disassoc/deauth(c0) frame, reason code:a
[ 9715.028615] notify_wx_assoc_event(): Tell user space disconnected
[ 9715.028624] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9715.028627] ====>remove Tx_TS_admin_list
[ 9715.028631] ====>remove Tx_TS_admin_list
[ 9715.028667] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9715.174032] =====>rtl8192_set_chan()====ch:1
[ 9715.292941] =====>rtl8192_set_chan()====ch:2
[ 9715.412815] =====>rtl8192_set_chan()====ch:3
[ 9715.532728] =====>rtl8192_set_chan()====ch:4
[ 9715.652766] =====>rtl8192_set_chan()====ch:5
[ 9715.772545] =====>rtl8192_set_chan()====ch:6
[ 9715.892484] =====>rtl8192_set_chan()====ch:7
[ 9716.012420] =====>rtl8192_set_chan()====ch:8
[ 9716.132308] =====>rtl8192_set_chan()====ch:9
[ 9716.252126] =====>rtl8192_set_chan()====ch:10
[ 9716.372179] =====>rtl8192_set_chan()====ch:11
[ 9716.492036] =====>rtl8192_set_chan()====ch:12
[ 9716.611979] =====>rtl8192_set_chan()====ch:13
[ 9716.733023] ===>rtllib_start_scan()
[ 9716.733112] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9716.733143] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9716.733335] ===>rtllib_associate_procedure_wq(), chan:1
[ 9716.733345] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9716.733353] =====>rtl8192_set_chan()====ch:1
[ 9716.745155] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9716.748973] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9716.748979] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9716.748984] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9716.748989] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9716.748994] Associated successfully
[ 9716.748997] normal associate
[ 9716.749009] Using G rates:108
[ 9716.749012] Successfully associated, ht not enabled(0, 0)
[ 9716.749017] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9716.749025] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9716.750595] RX: IEEE802.1X EAPOL frame!
[ 9716.759086] RX: IEEE802.1X EAPOL frame!
[ 9716.759184] alg name:TKIP
[ 9716.759807] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9716.764404] RX: IEEE802.1X EAPOL frame!
[ 9716.764559] alg name:TKIP
[ 9716.765181] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9743.206045] ==========>received disassoc/deauth(c0) frame, reason code:a
[ 9743.206102] notify_wx_assoc_event(): Tell user space disconnected
[ 9743.206121] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9743.206129] ====>remove Tx_TS_admin_list
[ 9743.206137] ====>remove Tx_TS_admin_list
[ 9743.207351] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9743.321138] =====>rtl8192_set_chan()====ch:1
[ 9743.432560] =====>rtl8192_set_chan()====ch:2
[ 9743.552506] =====>rtl8192_set_chan()====ch:3
[ 9743.672374] =====>rtl8192_set_chan()====ch:4
[ 9743.792311] =====>rtl8192_set_chan()====ch:5
[ 9743.912202] =====>rtl8192_set_chan()====ch:6
[ 9744.032180] =====>rtl8192_set_chan()====ch:7
[ 9744.152050] =====>rtl8192_set_chan()====ch:8
[ 9744.272007] =====>rtl8192_set_chan()====ch:9
[ 9744.391881] =====>rtl8192_set_chan()====ch:10
[ 9744.511784] =====>rtl8192_set_chan()====ch:11
[ 9744.631738] =====>rtl8192_set_chan()====ch:12
[ 9744.751615] =====>rtl8192_set_chan()====ch:13
[ 9744.872309] ===>rtllib_start_scan()
[ 9744.872427] =====>rtl8192_set_chan()====ch:2
[ 9744.882593] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9744.882631] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9744.883660] ===>rtllib_associate_procedure_wq(), chan:1
[ 9744.883672] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9744.883681] =====>rtl8192_set_chan()====ch:1
[ 9744.896768] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9744.903243] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9744.903251] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9744.903256] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9744.903262] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9744.903268] Associated successfully
[ 9744.903271] normal associate
[ 9744.903285] Using G rates:108
[ 9744.903290] Successfully associated, ht not enabled(0, 0)
[ 9744.903296] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9744.903305] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9744.904535] RX: IEEE802.1X EAPOL frame!
[ 9744.911156] RX: IEEE802.1X EAPOL frame!
[ 9744.911306] alg name:TKIP
[ 9744.911941] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9744.917918] RX: IEEE802.1X EAPOL frame!
[ 9744.918154] alg name:TKIP
[ 9744.918800] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9773.611073] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9773.611081] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9773.611084] ====>remove Tx_TS_admin_list
[ 9773.611088] ====>remove Tx_TS_admin_list
[ 9773.611095] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9773.611107] notify_wx_assoc_event(): Tell user space disconnected
[ 9773.711439] =====>rtl8192_set_chan()====ch:1
[ 9773.830600] =====>rtl8192_set_chan()====ch:2
[ 9773.950624] =====>rtl8192_set_chan()====ch:3
[ 9774.070543] =====>rtl8192_set_chan()====ch:4
[ 9774.190353] =====>rtl8192_set_chan()====ch:5
[ 9774.310274] =====>rtl8192_set_chan()====ch:6
[ 9774.430173] =====>rtl8192_set_chan()====ch:7
[ 9774.550946] =====>rtl8192_set_chan()====ch:8
[ 9774.670007] =====>rtl8192_set_chan()====ch:9
[ 9774.789948] =====>rtl8192_set_chan()====ch:10
[ 9774.909825] =====>rtl8192_set_chan()====ch:11
[ 9775.029734] =====>rtl8192_set_chan()====ch:12
[ 9775.149692] =====>rtl8192_set_chan()====ch:13
[ 9775.270488] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9775.270552] ===>rtllib_associate_procedure_wq(), chan:1
[ 9775.270558] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9775.270564] =====>rtl8192_set_chan()====ch:1
[ 9775.281094] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9775.281123] ===>rtllib_associate_procedure_wq(), chan:1
[ 9775.281132] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9775.281140] =====>rtl8192_set_chan()====ch:1
[ 9775.291339] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9775.292421] ===>rtllib_associate_procedure_wq(), chan:1
[ 9775.292431] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9775.292440] =====>rtl8192_set_chan()====ch:1
[ 9775.304584] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9775.308657] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9775.308663] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9775.308668] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9775.308674] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9775.308679] Associated successfully
[ 9775.308682] normal associate
[ 9775.308690] Using G rates:108
[ 9775.308694] Successfully associated, ht not enabled(0, 0)
[ 9775.308700] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9775.308709] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9775.310152] RX: IEEE802.1X EAPOL frame!
[ 9775.319278] RX: IEEE802.1X EAPOL frame!
[ 9775.319622] alg name:TKIP
[ 9775.320263] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9775.324850] RX: IEEE802.1X EAPOL frame!
[ 9775.325263] alg name:TKIP
[ 9775.325886] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9784.420131] =====>rtllib_sta_ps(): no need to ps,wake up!! ieee->ps is 0,ieee->iw_mode is 2,ieee->state is 5
[ 9784.936355] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9784.992554] =====>rtl8192_set_chan()====ch:1
[ 9785.112433] =====>rtl8192_set_chan()====ch:2
[ 9785.232405] =====>rtl8192_set_chan()====ch:3
[ 9785.352258] =====>rtl8192_set_chan()====ch:4
[ 9785.472184] =====>rtl8192_set_chan()====ch:5
[ 9785.592141] =====>rtl8192_set_chan()====ch:6
[ 9785.712069] =====>rtl8192_set_chan()====ch:7
[ 9785.831940] =====>rtl8192_set_chan()====ch:8
[ 9785.951854] =====>rtl8192_set_chan()====ch:9
[ 9786.071771] =====>rtl8192_set_chan()====ch:10
[ 9786.191657] =====>rtl8192_set_chan()====ch:11
[ 9786.311563] =====>rtl8192_set_chan()====ch:12
[ 9786.431496] =====>rtl8192_set_chan()====ch:13
[ 9786.551486] =====>rtl8192_set_chan()====ch:1
[ 9786.561562] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9786.561574] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9793.596657] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9793.596665] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9793.596668] ====>remove Tx_TS_admin_list
[ 9793.596672] ====>remove Tx_TS_admin_list
[ 9793.596679] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9793.596742] notify_wx_assoc_event(): Tell user space disconnected
[ 9793.697308] =====>rtl8192_set_chan()====ch:1
[ 9793.816182] =====>rtl8192_set_chan()====ch:2
[ 9793.936128] =====>rtl8192_set_chan()====ch:3
[ 9794.055966] =====>rtl8192_set_chan()====ch:4
[ 9794.175894] =====>rtl8192_set_chan()====ch:5
[ 9794.295839] =====>rtl8192_set_chan()====ch:6
[ 9794.415725] =====>rtl8192_set_chan()====ch:7
[ 9794.535677] =====>rtl8192_set_chan()====ch:8
[ 9794.655497] =====>rtl8192_set_chan()====ch:9
[ 9794.775481] =====>rtl8192_set_chan()====ch:10
[ 9794.895314] =====>rtl8192_set_chan()====ch:11
[ 9795.015308] =====>rtl8192_set_chan()====ch:12
[ 9795.135233] =====>rtl8192_set_chan()====ch:13
[ 9795.256312] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9795.256375] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9795.256391] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9795.256513] ===>rtllib_associate_procedure_wq(), chan:1
[ 9795.256519] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9795.256525] =====>rtl8192_set_chan()====ch:1
[ 9795.270205] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9795.275283] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9795.275289] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9795.275294] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9795.275299] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9795.275304] Associated successfully
[ 9795.275307] normal associate
[ 9795.275317] Using G rates:108
[ 9795.275321] Successfully associated, ht not enabled(0, 0)
[ 9795.275326] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9795.275335] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9795.276752] RX: IEEE802.1X EAPOL frame!
[ 9795.284246] RX: IEEE802.1X EAPOL frame!
[ 9795.284845] alg name:TKIP
[ 9795.285484] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9795.290078] RX: IEEE802.1X EAPOL frame!
[ 9795.290385] alg name:TKIP
[ 9795.291014] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9811.643192] too short to sleep::e85e2, e85dd, 5
[ 9817.579378] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9817.579391] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9817.579396] ====>remove Tx_TS_admin_list
[ 9817.579403] ====>remove Tx_TS_admin_list
[ 9817.579412] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9817.579424] notify_wx_assoc_event(): Tell user space disconnected
[ 9817.679907] =====>rtl8192_set_chan()====ch:1
[ 9817.798823] =====>rtl8192_set_chan()====ch:2
[ 9817.918736] =====>rtl8192_set_chan()====ch:3
[ 9818.038713] =====>rtl8192_set_chan()====ch:4
[ 9818.158576] =====>rtl8192_set_chan()====ch:5
[ 9818.278487] =====>rtl8192_set_chan()====ch:6
[ 9818.398456] =====>rtl8192_set_chan()====ch:7
[ 9818.518301] =====>rtl8192_set_chan()====ch:8
[ 9818.638167] =====>rtl8192_set_chan()====ch:9
[ 9818.758127] =====>rtl8192_set_chan()====ch:10
[ 9818.878109] =====>rtl8192_set_chan()====ch:11
[ 9818.997929] =====>rtl8192_set_chan()====ch:12
[ 9819.117983] =====>rtl8192_set_chan()====ch:13
[ 9819.239388] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9819.239457] ===>rtllib_associate_procedure_wq(), chan:1
[ 9819.239466] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9819.239474] =====>rtl8192_set_chan()====ch:1
[ 9819.250018] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9819.250038] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9819.250762] ===>rtllib_associate_procedure_wq(), chan:1
[ 9819.250768] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9819.250773] =====>rtl8192_set_chan()====ch:1
[ 9819.262899] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9819.266825] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9819.266837] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9819.266846] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9819.266856] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9819.266863] Associated successfully
[ 9819.266870] normal associate
[ 9819.266884] Using G rates:108
[ 9819.266891] Successfully associated, ht not enabled(0, 0)
[ 9819.266900] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9819.266913] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9819.268335] RX: IEEE802.1X EAPOL frame!
[ 9819.275354] RX: IEEE802.1X EAPOL frame!
[ 9819.275608] alg name:TKIP
[ 9819.276242] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9819.280786] RX: IEEE802.1X EAPOL frame!
[ 9819.281245] alg name:TKIP
[ 9819.281871] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9837.564829] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[ 9837.564843] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9837.564850] ====>remove Tx_TS_admin_list
[ 9837.564858] ====>remove Tx_TS_admin_list
[ 9837.564870] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9837.564884] notify_wx_assoc_event(): Tell user space disconnected
[ 9837.665436] =====>rtl8192_set_chan()====ch:1
[ 9837.784349] =====>rtl8192_set_chan()====ch:2
[ 9837.904238] =====>rtl8192_set_chan()====ch:3
[ 9838.024185] =====>rtl8192_set_chan()====ch:4
[ 9838.144113] =====>rtl8192_set_chan()====ch:5
[ 9838.264036] =====>rtl8192_set_chan()====ch:6
[ 9838.383950] =====>rtl8192_set_chan()====ch:7
[ 9838.503916] =====>rtl8192_set_chan()====ch:8
[ 9838.623784] =====>rtl8192_set_chan()====ch:9
[ 9838.743701] =====>rtl8192_set_chan()====ch:10
[ 9838.863690] =====>rtl8192_set_chan()====ch:11
[ 9838.983547] =====>rtl8192_set_chan()====ch:12
[ 9839.103432] =====>rtl8192_set_chan()====ch:13
[ 9839.224512] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9839.224595] ===>rtllib_associate_procedure_wq(), chan:1
[ 9839.224604] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9839.224612] =====>rtl8192_set_chan()====ch:1
[ 9839.234985] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9839.235014] ===>rtllib_associate_procedure_wq(), chan:1
[ 9839.235021] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9839.235027] =====>rtl8192_set_chan()====ch:1
[ 9839.245223] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9839.246758] ===>rtllib_associate_procedure_wq(), chan:1
[ 9839.246769] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9839.246777] =====>rtl8192_set_chan()====ch:1
[ 9839.311287] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9839.316974] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9839.316982] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9839.316988] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9839.316994] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9839.317000] Associated successfully
[ 9839.317003] normal associate
[ 9839.317015] Using G rates:108
[ 9839.317019] Successfully associated, ht not enabled(0, 0)
[ 9839.317026] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9839.317035] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9839.318434] RX: IEEE802.1X EAPOL frame!
[ 9839.325262] RX: IEEE802.1X EAPOL frame!
[ 9839.325735] alg name:TKIP
[ 9839.326428] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9839.330907] RX: IEEE802.1X EAPOL frame!
[ 9839.331134] alg name:TKIP
[ 9839.331749] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9847.667407] too short to sleep::e93f7, e93f2, 5
[ 9861.528599] ==========>received disassoc/deauth(c0) frame, reason code:a
[ 9861.528656] notify_wx_assoc_event(): Tell user space disconnected
[ 9861.528677] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9861.528685] ====>remove Tx_TS_admin_list
[ 9861.528694] ====>remove Tx_TS_admin_list
[ 9861.528763] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9861.717066] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9861.717421] =====>rtl8192_set_chan()====ch:1
[ 9861.837009] =====>rtl8192_set_chan()====ch:2
[ 9861.956881] =====>rtl8192_set_chan()====ch:3
[ 9862.076890] =====>rtl8192_set_chan()====ch:4
[ 9862.196658] =====>rtl8192_set_chan()====ch:5
[ 9862.316685] =====>rtl8192_set_chan()====ch:6
[ 9862.436567] =====>rtl8192_set_chan()====ch:7
[ 9862.556472] =====>rtl8192_set_chan()====ch:8
[ 9862.676393] =====>rtl8192_set_chan()====ch:9
[ 9862.796333] =====>rtl8192_set_chan()====ch:10
[ 9862.916251] =====>rtl8192_set_chan()====ch:11
[ 9863.036067] =====>rtl8192_set_chan()====ch:12
[ 9863.156012] =====>rtl8192_set_chan()====ch:13
[ 9863.277381] ===>rtllib_start_scan()
[ 9863.277439] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9863.277458] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9863.277684] ===>rtllib_associate_procedure_wq(), chan:1
[ 9863.277690] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9863.277695] =====>rtl8192_set_chan()====ch:1
[ 9863.289481] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9863.293381] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9863.293387] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9863.293392] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9863.293397] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9863.293402] Associated successfully
[ 9863.293406] normal associate
[ 9863.293421] Using G rates:108
[ 9863.293424] Successfully associated, ht not enabled(0, 0)
[ 9863.293430] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9863.293437] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9863.294963] RX: IEEE802.1X EAPOL frame!
[ 9863.301908] RX: IEEE802.1X EAPOL frame!
[ 9863.304267] alg name:TKIP
[ 9863.304897] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9863.310525] RX: IEEE802.1X EAPOL frame!
[ 9863.310700] alg name:TKIP
[ 9863.311325] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9880.924854] ==========>received disassoc/deauth(c0) frame, reason code:a
[ 9880.924888] notify_wx_assoc_event(): Tell user space disconnected
[ 9880.924898] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9880.924901] ====>remove Tx_TS_admin_list
[ 9880.924904] ====>remove Tx_TS_admin_list
[ 9880.924949] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9881.026150] =====>rtl8192_set_chan()====ch:1
[ 9881.143051] =====>rtl8192_set_chan()====ch:2
[ 9881.262906] =====>rtl8192_set_chan()====ch:3
[ 9881.382837] =====>rtl8192_set_chan()====ch:4
[ 9881.502802] =====>rtl8192_set_chan()====ch:5
[ 9881.622739] =====>rtl8192_set_chan()====ch:6
[ 9881.742658] =====>rtl8192_set_chan()====ch:7
[ 9881.862551] =====>rtl8192_set_chan()====ch:8
[ 9881.982415] =====>rtl8192_set_chan()====ch:9
[ 9882.102399] =====>rtl8192_set_chan()====ch:10
[ 9882.222316] =====>rtl8192_set_chan()====ch:11
[ 9882.342162] =====>rtl8192_set_chan()====ch:12
[ 9882.462115] =====>rtl8192_set_chan()====ch:13
[ 9882.583069] ===>rtllib_start_scan()
[ 9882.583156] =====>rtl8192_set_chan()====ch:2
[ 9882.593278] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9882.593316] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9882.594231] ===>rtllib_associate_procedure_wq(), chan:1
[ 9882.594242] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9882.594251] =====>rtl8192_set_chan()====ch:1
[ 9882.606112] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9882.610120] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9882.610127] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9882.610136] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9882.610140] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9882.610143] Associated successfully
[ 9882.610145] normal associate
[ 9882.610155] Using G rates:108
[ 9882.610158] Successfully associated, ht not enabled(0, 0)
[ 9882.610162] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9882.610168] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9882.611655] RX: IEEE802.1X EAPOL frame!
[ 9882.619785] RX: IEEE802.1X EAPOL frame!
[ 9882.619972] alg name:TKIP
[ 9882.620606] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9882.624981] RX: IEEE802.1X EAPOL frame!
[ 9882.625195] alg name:TKIP
[ 9882.625824] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9895.363370] ==========>received disassoc/deauth(c0) frame, reason code:a
[ 9895.363387] notify_wx_assoc_event(): Tell user space disconnected
[ 9895.363402] ===========>RemovePeerTS,00:27:0d:71:8f:80
[ 9895.363407] ====>remove Tx_TS_admin_list
[ 9895.363411] ====>remove Tx_TS_admin_list
[ 9895.363456] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9895.504086] =====>rtl8192_set_chan()====ch:1
[ 9895.622540] =====>rtl8192_set_chan()====ch:2
[ 9895.742460] =====>rtl8192_set_chan()====ch:3
[ 9895.862349] =====>rtl8192_set_chan()====ch:4
[ 9895.982350] =====>rtl8192_set_chan()====ch:5
[ 9896.102213] =====>rtl8192_set_chan()====ch:6
[ 9896.222146] =====>rtl8192_set_chan()====ch:7
[ 9896.342117] =====>rtl8192_set_chan()====ch:8
[ 9896.461972] =====>rtl8192_set_chan()====ch:9
[ 9896.581828] =====>rtl8192_set_chan()====ch:10
[ 9896.701836] =====>rtl8192_set_chan()====ch:11
[ 9896.821699] =====>rtl8192_set_chan()====ch:12
[ 9896.941647] =====>rtl8192_set_chan()====ch:13
[ 9897.063090] ===>rtllib_start_scan()
[ 9897.063130] =====>rtl8192_set_chan()====ch:2
[ 9897.073201] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9897.073239] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 9897.073391] ===>rtllib_associate_procedure_wq(), chan:1
[ 9897.073396] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 9897.073401] =====>rtl8192_set_chan()====ch:1
[ 9897.085345] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 9897.089322] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 9897.089326] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 9897.089329] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 9897.089333] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 9897.089336] Associated successfully
[ 9897.089338] normal associate
[ 9897.089349] Using G rates:108
[ 9897.089351] Successfully associated, ht not enabled(0, 0)
[ 9897.089355] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9897.089362] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9897.090918] RX: IEEE802.1X EAPOL frame!
[ 9897.099665] RX: IEEE802.1X EAPOL frame!
[ 9897.099872] alg name:TKIP
[ 9897.100503] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[ 9897.105799] RX: IEEE802.1X EAPOL frame!
[ 9897.105895] alg name:TKIP
[ 9897.106523] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 9905.846316] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9905.905280] =====>rtl8192_set_chan()====ch:1
[ 9906.025084] =====>rtl8192_set_chan()====ch:2
[ 9906.144960] =====>rtl8192_set_chan()====ch:3
[ 9906.264926] =====>rtl8192_set_chan()====ch:4
[ 9906.384837] =====>rtl8192_set_chan()====ch:5
[ 9906.504770] =====>rtl8192_set_chan()====ch:6
[ 9906.624641] =====>rtl8192_set_chan()====ch:7
[ 9906.744553] =====>rtl8192_set_chan()====ch:8
[ 9906.864481] =====>rtl8192_set_chan()====ch:9
[ 9906.984374] =====>rtl8192_set_chan()====ch:10
[ 9907.104280] =====>rtl8192_set_chan()====ch:11
[ 9907.224186] =====>rtl8192_set_chan()====ch:12
[ 9907.344139] =====>rtl8192_set_chan()====ch:13
[ 9907.464032] =====>rtl8192_set_chan()====ch:1
[ 9907.474353] ===>rtl8192se_link_change():ieee->iw_mode is 2
[ 9907.474365] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[ 9931.996311] too short to sleep::eb4ee, eb4e9, 5
[ 9983.269214] too short to sleep::ec8f9, ec8f4, 5
[10003.932974] ==========>received disassoc/deauth(c0) frame, reason code:a
[10003.933044] notify_wx_assoc_event(): Tell user space disconnected
[10003.933063] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10003.933070] ====>remove Tx_TS_admin_list
[10003.933077] ====>remove Tx_TS_admin_list
[10003.933133] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10004.085999] =====>rtl8192_set_chan()====ch:1
[10004.204171] =====>rtl8192_set_chan()====ch:2
[10004.324048] =====>rtl8192_set_chan()====ch:3
[10004.443973] =====>rtl8192_set_chan()====ch:4
[10004.573826] =====>rtl8192_set_chan()====ch:5
[10004.693738] =====>rtl8192_set_chan()====ch:6
[10004.813673] =====>rtl8192_set_chan()====ch:7
[10004.933567] =====>rtl8192_set_chan()====ch:8
[10005.053494] =====>rtl8192_set_chan()====ch:9
[10005.173424] =====>rtl8192_set_chan()====ch:10
[10005.293366] =====>rtl8192_set_chan()====ch:11
[10005.413243] =====>rtl8192_set_chan()====ch:12
[10005.533190] =====>rtl8192_set_chan()====ch:13
[10005.654080] ===>rtllib_start_scan()
[10005.654248] =====>rtl8192_set_chan()====ch:2
[10005.664455] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10005.664585] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10005.664695] ===>rtllib_associate_procedure_wq(), chan:1
[10005.664701] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10005.664707] =====>rtl8192_set_chan()====ch:1
[10005.677852] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10005.683529] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10005.683534] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10005.683537] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10005.683541] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10005.683545] Associated successfully
[10005.683547] normal associate
[10005.683558] Using G rates:108
[10005.683561] Successfully associated, ht not enabled(0, 0)
[10005.683565] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10005.683572] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10005.685119] RX: IEEE802.1X EAPOL frame!
[10005.692470] RX: IEEE802.1X EAPOL frame!
[10005.692671] alg name:TKIP
[10005.693314] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10005.698825] RX: IEEE802.1X EAPOL frame!
[10005.698956] alg name:TKIP
[10005.699582] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10024.219484] ==========>received disassoc/deauth(c0) frame, reason code:a
[10024.219506] notify_wx_assoc_event(): Tell user space disconnected
[10024.219520] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10024.219525] ====>remove Tx_TS_admin_list
[10024.219531] ====>remove Tx_TS_admin_list
[10024.219588] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10024.420788] =====>rtl8192_set_chan()====ch:1
[10024.539461] =====>rtl8192_set_chan()====ch:2
[10024.659423] =====>rtl8192_set_chan()====ch:3
[10024.779287] =====>rtl8192_set_chan()====ch:4
[10024.899078] =====>rtl8192_set_chan()====ch:5
[10025.018998] =====>rtl8192_set_chan()====ch:6
[10025.139048] =====>rtl8192_set_chan()====ch:7
[10025.258916] =====>rtl8192_set_chan()====ch:8
[10025.378845] =====>rtl8192_set_chan()====ch:9
[10025.498741] =====>rtl8192_set_chan()====ch:10
[10025.618585] =====>rtl8192_set_chan()====ch:11
[10025.738590] =====>rtl8192_set_chan()====ch:12
[10025.858498] =====>rtl8192_set_chan()====ch:13
[10025.979403] ===>rtllib_start_scan()
[10025.979559] =====>rtl8192_set_chan()====ch:2
[10025.989668] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10025.989743] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10025.990301] ===>rtllib_associate_procedure_wq(), chan:1
[10025.990307] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10025.990312] =====>rtl8192_set_chan()====ch:1
[10026.002263] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10026.008521] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10026.008527] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10026.008533] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10026.008538] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10026.008543] Associated successfully
[10026.008547] normal associate
[10026.008561] Using G rates:108
[10026.008565] Successfully associated, ht not enabled(0, 0)
[10026.008571] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10026.008579] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10026.010075] RX: IEEE802.1X EAPOL frame!
[10026.019752] RX: IEEE802.1X EAPOL frame!
[10026.019950] alg name:TKIP
[10026.020578] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10026.024941] RX: IEEE802.1X EAPOL frame!
[10026.025114] alg name:TKIP
[10026.025741] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10026.759676] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10026.817814] =====>rtl8192_set_chan()====ch:1
[10026.937635] =====>rtl8192_set_chan()====ch:2
[10027.057578] =====>rtl8192_set_chan()====ch:3
[10027.177516] =====>rtl8192_set_chan()====ch:4
[10027.297422] =====>rtl8192_set_chan()====ch:5
[10027.417392] =====>rtl8192_set_chan()====ch:6
[10027.537294] =====>rtl8192_set_chan()====ch:7
[10027.657180] =====>rtl8192_set_chan()====ch:8
[10027.777088] =====>rtl8192_set_chan()====ch:9
[10027.896965] =====>rtl8192_set_chan()====ch:10
[10028.016941] =====>rtl8192_set_chan()====ch:11
[10028.136874] =====>rtl8192_set_chan()====ch:12
[10028.256729] =====>rtl8192_set_chan()====ch:13
[10028.376633] =====>rtl8192_set_chan()====ch:1
[10028.386723] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10028.386739] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10042.993204] ==========>received disassoc/deauth(c0) frame, reason code:a
[10042.993260] notify_wx_assoc_event(): Tell user space disconnected
[10042.993275] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10042.993280] ====>remove Tx_TS_admin_list
[10042.993286] ====>remove Tx_TS_admin_list
[10042.993491] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10043.102005] =====>rtl8192_set_chan()====ch:1
[10043.224118] =====>rtl8192_set_chan()====ch:2
[10043.345885] =====>rtl8192_set_chan()====ch:3
[10043.465781] =====>rtl8192_set_chan()====ch:4
[10043.585662] =====>rtl8192_set_chan()====ch:5
[10043.705611] =====>rtl8192_set_chan()====ch:6
[10043.825485] =====>rtl8192_set_chan()====ch:7
[10043.945453] =====>rtl8192_set_chan()====ch:8
[10044.065284] =====>rtl8192_set_chan()====ch:9
[10044.185254] =====>rtl8192_set_chan()====ch:10
[10044.305156] =====>rtl8192_set_chan()====ch:11
[10044.425065] =====>rtl8192_set_chan()====ch:12
[10044.544991] =====>rtl8192_set_chan()====ch:13
[10044.669546] ===>rtllib_start_scan()
[10044.669628] =====>rtl8192_set_chan()====ch:2
[10044.679805] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10044.679864] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10044.680769] ===>rtllib_associate_procedure_wq(), chan:1
[10044.680776] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10044.680781] =====>rtl8192_set_chan()====ch:1
[10044.692935] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10044.696895] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10044.696902] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10044.696908] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10044.696914] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10044.696919] Associated successfully
[10044.696923] normal associate
[10044.696938] Using G rates:108
[10044.696942] Successfully associated, ht not enabled(0, 0)
[10044.696949] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10044.696958] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10044.698325] RX: IEEE802.1X EAPOL frame!
[10044.705015] RX: IEEE802.1X EAPOL frame!
[10044.705222] alg name:TKIP
[10044.705850] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10044.712522] RX: IEEE802.1X EAPOL frame!
[10044.712798] alg name:TKIP
[10044.713426] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10057.904326] ==========>received disassoc/deauth(c0) frame, reason code:a
[10057.904348] notify_wx_assoc_event(): Tell user space disconnected
[10057.904362] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10057.904367] ====>remove Tx_TS_admin_list
[10057.904373] ====>remove Tx_TS_admin_list
[10057.904627] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10058.066590] =====>rtl8192_set_chan()====ch:1
[10058.185138] =====>rtl8192_set_chan()====ch:2
[10058.305042] =====>rtl8192_set_chan()====ch:3
[10058.424999] =====>rtl8192_set_chan()====ch:4
[10058.544816] =====>rtl8192_set_chan()====ch:5
[10058.664770] =====>rtl8192_set_chan()====ch:6
[10058.784678] =====>rtl8192_set_chan()====ch:7
[10058.904602] =====>rtl8192_set_chan()====ch:8
[10059.024512] =====>rtl8192_set_chan()====ch:9
[10059.144401] =====>rtl8192_set_chan()====ch:10
[10059.264359] =====>rtl8192_set_chan()====ch:11
[10059.384274] =====>rtl8192_set_chan()====ch:12
[10059.504235] =====>rtl8192_set_chan()====ch:13
[10059.625608] ===>rtllib_start_scan()
[10059.625747] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10059.625778] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10059.625895] ===>rtllib_associate_procedure_wq(), chan:1
[10059.625903] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10059.625911] =====>rtl8192_set_chan()====ch:1
[10059.638046] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10059.641981] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10059.641989] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10059.641995] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10059.642001] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10059.642006] Associated successfully
[10059.642010] normal associate
[10059.642024] Using G rates:108
[10059.642028] Successfully associated, ht not enabled(0, 0)
[10059.642035] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10059.642044] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10059.643512] RX: IEEE802.1X EAPOL frame!
[10059.653534] RX: IEEE802.1X EAPOL frame!
[10059.653704] alg name:TKIP
[10059.654334] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10059.659989] RX: IEEE802.1X EAPOL frame!
[10059.660193] alg name:TKIP
[10059.660820] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10101.473931] too short to sleep::ef72e, ef729, 5
[10119.361276] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10119.361290] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10119.361298] ====>remove Tx_TS_admin_list
[10119.361306] ====>remove Tx_TS_admin_list
[10119.361318] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10119.361389] notify_wx_assoc_event(): Tell user space disconnected
[10119.462013] =====>rtl8192_set_chan()====ch:1
[10119.580839] =====>rtl8192_set_chan()====ch:2
[10119.700637] =====>rtl8192_set_chan()====ch:3
[10119.820551] =====>rtl8192_set_chan()====ch:4
[10119.940452] =====>rtl8192_set_chan()====ch:5
[10120.060358] =====>rtl8192_set_chan()====ch:6
[10120.180312] =====>rtl8192_set_chan()====ch:7
[10120.300190] =====>rtl8192_set_chan()====ch:8
[10120.420160] =====>rtl8192_set_chan()====ch:9
[10120.540041] =====>rtl8192_set_chan()====ch:10
[10120.659944] =====>rtl8192_set_chan()====ch:11
[10120.779964] =====>rtl8192_set_chan()====ch:12
[10120.899781] =====>rtl8192_set_chan()====ch:13
[10121.021224] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10121.021351] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10121.021381] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10121.021456] ===>rtllib_associate_procedure_wq(), chan:1
[10121.021465] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10121.021474] =====>rtl8192_set_chan()====ch:1
[10121.036113] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10121.040829] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10121.040834] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10121.040837] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10121.040840] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10121.040844] Associated successfully
[10121.040846] normal associate
[10121.040855] Using G rates:108
[10121.040857] Successfully associated, ht not enabled(0, 0)
[10121.040861] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10121.040868] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10121.042366] RX: IEEE802.1X EAPOL frame!
[10121.051315] RX: IEEE802.1X EAPOL frame!
[10121.051498] alg name:TKIP
[10121.052141] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10121.057334] RX: IEEE802.1X EAPOL frame!
[10121.057617] alg name:TKIP
[10121.058244] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10139.347305] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10139.347320] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10139.347328] ====>remove Tx_TS_admin_list
[10139.347335] ====>remove Tx_TS_admin_list
[10139.347347] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10139.347364] notify_wx_assoc_event(): Tell user space disconnected
[10139.447832] =====>rtl8192_set_chan()====ch:1
[10139.566307] =====>rtl8192_set_chan()====ch:2
[10139.686167] =====>rtl8192_set_chan()====ch:3
[10139.796148] =====>rtl8192_set_chan()====ch:4
[10139.916055] =====>rtl8192_set_chan()====ch:5
[10140.035964] =====>rtl8192_set_chan()====ch:6
[10140.155894] =====>rtl8192_set_chan()====ch:7
[10140.275855] =====>rtl8192_set_chan()====ch:8
[10140.395732] =====>rtl8192_set_chan()====ch:9
[10140.515705] =====>rtl8192_set_chan()====ch:10
[10140.635607] =====>rtl8192_set_chan()====ch:11
[10140.755441] =====>rtl8192_set_chan()====ch:12
[10140.875319] =====>rtl8192_set_chan()====ch:13
[10140.998577] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10140.998632] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10140.998648] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10140.998707] ===>rtllib_associate_procedure_wq(), chan:1
[10140.998713] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10140.998718] =====>rtl8192_set_chan()====ch:1
[10141.010798] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10141.015527] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10141.015533] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10141.015538] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10141.015542] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10141.015546] Associated successfully
[10141.015549] normal associate
[10141.015558] Using G rates:108
[10141.015561] Successfully associated, ht not enabled(0, 0)
[10141.015566] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10141.015573] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10141.017180] RX: IEEE802.1X EAPOL frame!
[10141.025518] RX: IEEE802.1X EAPOL frame!
[10141.025768] alg name:TKIP
[10141.026406] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10141.030803] RX: IEEE802.1X EAPOL frame!
[10141.031041] alg name:TKIP
[10141.031671] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10147.676573] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10147.730600] =====>rtl8192_set_chan()====ch:1
[10147.850316] =====>rtl8192_set_chan()====ch:2
[10147.970207] =====>rtl8192_set_chan()====ch:3
[10148.090165] =====>rtl8192_set_chan()====ch:4
[10148.210054] =====>rtl8192_set_chan()====ch:5
[10148.329936] =====>rtl8192_set_chan()====ch:6
[10148.449877] =====>rtl8192_set_chan()====ch:7
[10148.569856] =====>rtl8192_set_chan()====ch:8
[10148.689743] =====>rtl8192_set_chan()====ch:9
[10148.809673] =====>rtl8192_set_chan()====ch:10
[10148.929543] =====>rtl8192_set_chan()====ch:11
[10149.049512] =====>rtl8192_set_chan()====ch:12
[10149.169357] =====>rtl8192_set_chan()====ch:13
[10149.289330] =====>rtl8192_set_chan()====ch:1
[10149.299592] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10149.299608] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10162.909250] ==========>received disassoc/deauth(c0) frame, reason code:a
[10162.909308] notify_wx_assoc_event(): Tell user space disconnected
[10162.909327] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10162.909334] ====>remove Tx_TS_admin_list
[10162.909342] ====>remove Tx_TS_admin_list
[10162.909411] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10163.081711] =====>rtl8192_set_chan()====ch:1
[10163.199255] =====>rtl8192_set_chan()====ch:2
[10163.319160] =====>rtl8192_set_chan()====ch:3
[10163.439103] =====>rtl8192_set_chan()====ch:4
[10163.558988] =====>rtl8192_set_chan()====ch:5
[10163.678899] =====>rtl8192_set_chan()====ch:6
[10163.798802] =====>rtl8192_set_chan()====ch:7
[10163.918719] =====>rtl8192_set_chan()====ch:8
[10164.038626] =====>rtl8192_set_chan()====ch:9
[10164.158558] =====>rtl8192_set_chan()====ch:10
[10164.278487] =====>rtl8192_set_chan()====ch:11
[10164.398398] =====>rtl8192_set_chan()====ch:12
[10164.518286] =====>rtl8192_set_chan()====ch:13
[10164.639378] ===>rtllib_start_scan()
[10164.639400] =====>rtl8192_set_chan()====ch:2
[10164.649542] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10164.649596] ===>rtllib_associate_procedure_wq(), chan:1
[10164.649605] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10164.649614] =====>rtl8192_set_chan()====ch:1
[10164.659829] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10164.660490] ===>rtllib_associate_procedure_wq(), chan:1
[10164.660495] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10164.660499] =====>rtl8192_set_chan()====ch:1
[10164.672568] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10164.676605] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10164.676611] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10164.676616] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10164.676621] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10164.676625] Associated successfully
[10164.676628] normal associate
[10164.676640] Using G rates:108
[10164.676643] Successfully associated, ht not enabled(0, 0)
[10164.676649] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10164.676656] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10164.678004] RX: IEEE802.1X EAPOL frame!
[10164.686053] RX: IEEE802.1X EAPOL frame!
[10164.686326] alg name:TKIP
[10164.686962] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10164.691490] RX: IEEE802.1X EAPOL frame!
[10164.691751] alg name:TKIP
[10164.692383] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10178.806092] ==========>received disassoc/deauth(c0) frame, reason code:a
[10178.806149] notify_wx_assoc_event(): Tell user space disconnected
[10178.806164] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10178.806169] ====>remove Tx_TS_admin_list
[10178.806176] ====>remove Tx_TS_admin_list
[10178.806226] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10178.979050] =====>rtl8192_set_chan()====ch:1
[10179.097741] =====>rtl8192_set_chan()====ch:2
[10179.217707] =====>rtl8192_set_chan()====ch:3
[10179.337582] =====>rtl8192_set_chan()====ch:4
[10179.457494] =====>rtl8192_set_chan()====ch:5
[10179.577442] =====>rtl8192_set_chan()====ch:6
[10179.697277] =====>rtl8192_set_chan()====ch:7
[10179.817182] =====>rtl8192_set_chan()====ch:8
[10179.937142] =====>rtl8192_set_chan()====ch:9
[10180.056988] =====>rtl8192_set_chan()====ch:10
[10180.177046] =====>rtl8192_set_chan()====ch:11
[10180.296891] =====>rtl8192_set_chan()====ch:12
[10180.416762] =====>rtl8192_set_chan()====ch:13
[10180.537837] ===>rtllib_start_scan()
[10180.537922] =====>rtl8192_set_chan()====ch:2
[10180.548018] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10180.548075] ===>rtllib_associate_procedure_wq(), chan:1
[10180.548084] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10180.548093] =====>rtl8192_set_chan()====ch:1
[10180.558202] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10180.558806] ===>rtllib_associate_procedure_wq(), chan:1
[10180.558811] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10180.558816] =====>rtl8192_set_chan()====ch:1
[10180.570607] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10180.575740] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10180.575750] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10180.575758] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10180.575766] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10180.575773] Associated successfully
[10180.575778] normal associate
[10180.575795] Using G rates:108
[10180.575801] Successfully associated, ht not enabled(0, 0)
[10180.575810] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10180.575821] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10180.576054] RX: IEEE802.1X EAPOL frame!
[10180.590991] RX: IEEE802.1X EAPOL frame!
[10180.591235] alg name:TKIP
[10180.591866] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10180.596257] RX: IEEE802.1X EAPOL frame!
[10180.596414] alg name:TKIP
[10180.597034] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10194.312306] ==========>received disassoc/deauth(c0) frame, reason code:a
[10194.312360] notify_wx_assoc_event(): Tell user space disconnected
[10194.312375] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10194.312380] ====>remove Tx_TS_admin_list
[10194.312386] ====>remove Tx_TS_admin_list
[10194.312434] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10194.458433] =====>rtl8192_set_chan()====ch:1
[10194.576563] =====>rtl8192_set_chan()====ch:2
[10194.696532] =====>rtl8192_set_chan()====ch:3
[10194.816378] =====>rtl8192_set_chan()====ch:4
[10194.936264] =====>rtl8192_set_chan()====ch:5
[10195.056125] =====>rtl8192_set_chan()====ch:6
[10195.176169] =====>rtl8192_set_chan()====ch:7
[10195.296009] =====>rtl8192_set_chan()====ch:8
[10195.415953] =====>rtl8192_set_chan()====ch:9
[10195.535846] =====>rtl8192_set_chan()====ch:10
[10195.655821] =====>rtl8192_set_chan()====ch:11
[10195.775711] =====>rtl8192_set_chan()====ch:12
[10195.895658] =====>rtl8192_set_chan()====ch:13
[10196.017471] ===>rtllib_start_scan()
[10196.017509] =====>rtl8192_set_chan()====ch:2
[10196.027679] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10196.027748] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10196.027861] ===>rtllib_associate_procedure_wq(), chan:1
[10196.027870] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10196.027878] =====>rtl8192_set_chan()====ch:1
[10196.039680] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10196.043677] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10196.043686] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10196.043692] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10196.043698] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10196.043704] Associated successfully
[10196.043708] normal associate
[10196.043723] Using G rates:108
[10196.043727] Successfully associated, ht not enabled(0, 0)
[10196.043734] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10196.043743] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10196.045141] RX: IEEE802.1X EAPOL frame!
[10196.053578] RX: IEEE802.1X EAPOL frame!
[10196.053791] alg name:TKIP
[10196.054435] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10196.058803] RX: IEEE802.1X EAPOL frame!
[10196.058962] alg name:TKIP
[10196.059588] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10211.294756] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10211.294767] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10211.294772] ====>remove Tx_TS_admin_list
[10211.294777] ====>remove Tx_TS_admin_list
[10211.294785] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10211.294798] notify_wx_assoc_event(): Tell user space disconnected
[10211.395211] =====>rtl8192_set_chan()====ch:1
[10211.514295] =====>rtl8192_set_chan()====ch:2
[10211.634199] =====>rtl8192_set_chan()====ch:3
[10211.754131] =====>rtl8192_set_chan()====ch:4
[10211.874085] =====>rtl8192_set_chan()====ch:5
[10211.993956] =====>rtl8192_set_chan()====ch:6
[10212.113860] =====>rtl8192_set_chan()====ch:7
[10212.233774] =====>rtl8192_set_chan()====ch:8
[10212.353710] =====>rtl8192_set_chan()====ch:9
[10212.473638] =====>rtl8192_set_chan()====ch:10
[10212.593523] =====>rtl8192_set_chan()====ch:11
[10212.713384] =====>rtl8192_set_chan()====ch:12
[10212.833342] =====>rtl8192_set_chan()====ch:13
[10212.953984] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10212.954033] ===>rtllib_associate_procedure_wq(), chan:1
[10212.954039] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10212.954044] =====>rtl8192_set_chan()====ch:1
[10212.964166] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10212.964185] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10212.965178] ===>rtllib_associate_procedure_wq(), chan:1
[10212.965184] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10212.965189] =====>rtl8192_set_chan()====ch:1
[10212.977035] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10212.980888] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10212.980894] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10212.980899] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10212.980903] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10212.980907] Associated successfully
[10212.980910] normal associate
[10212.980920] Using G rates:108
[10212.980923] Successfully associated, ht not enabled(0, 0)
[10212.980928] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10212.980936] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10212.982476] RX: IEEE802.1X EAPOL frame!
[10212.989113] RX: IEEE802.1X EAPOL frame!
[10212.989300] alg name:TKIP
[10212.989929] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10212.994338] RX: IEEE802.1X EAPOL frame!
[10212.994543] alg name:TKIP
[10212.995167] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10237.276201] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10237.276212] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10237.276218] ====>remove Tx_TS_admin_list
[10237.276224] ====>remove Tx_TS_admin_list
[10237.276234] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10237.276245] notify_wx_assoc_event(): Tell user space disconnected
[10237.376817] =====>rtl8192_set_chan()====ch:1
[10237.495613] =====>rtl8192_set_chan()====ch:2
[10237.615585] =====>rtl8192_set_chan()====ch:3
[10237.735372] =====>rtl8192_set_chan()====ch:4
[10237.855342] =====>rtl8192_set_chan()====ch:5
[10237.975264] =====>rtl8192_set_chan()====ch:6
[10238.095106] =====>rtl8192_set_chan()====ch:7
[10238.215085] =====>rtl8192_set_chan()====ch:8
[10238.334949] =====>rtl8192_set_chan()====ch:9
[10238.454888] =====>rtl8192_set_chan()====ch:10
[10238.574812] =====>rtl8192_set_chan()====ch:11
[10238.694733] =====>rtl8192_set_chan()====ch:12
[10238.814644] =====>rtl8192_set_chan()====ch:13
[10238.936048] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10238.936086] ===>rtllib_associate_procedure_wq(), chan:1
[10238.936094] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10238.936103] =====>rtl8192_set_chan()====ch:1
[10238.946529] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10238.946552] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10238.947248] ===>rtllib_associate_procedure_wq(), chan:1
[10238.947258] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10238.947268] =====>rtl8192_set_chan()====ch:1
[10238.959456] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10238.963273] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10238.963279] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10238.963283] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10238.963288] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10238.963292] Associated successfully
[10238.963295] normal associate
[10238.963304] Using G rates:108
[10238.963308] Successfully associated, ht not enabled(0, 0)
[10238.963313] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10238.963320] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10238.964794] RX: IEEE802.1X EAPOL frame!
[10238.972492] RX: IEEE802.1X EAPOL frame!
[10238.972765] alg name:TKIP
[10238.973408] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10238.982848] RX: IEEE802.1X EAPOL frame!
[10238.983337] alg name:TKIP
[10238.983970] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10249.357061] too short to sleep::f30fd, f30f8, 5
[10255.263128] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10255.263135] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10255.263138] ====>remove Tx_TS_admin_list
[10255.263142] ====>remove Tx_TS_admin_list
[10255.263149] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10255.263163] notify_wx_assoc_event(): Tell user space disconnected
[10255.363598] =====>rtl8192_set_chan()====ch:1
[10255.482558] =====>rtl8192_set_chan()====ch:2
[10255.602547] =====>rtl8192_set_chan()====ch:3
[10255.722345] =====>rtl8192_set_chan()====ch:4
[10255.842315] =====>rtl8192_set_chan()====ch:5
[10255.962177] =====>rtl8192_set_chan()====ch:6
[10256.082113] =====>rtl8192_set_chan()====ch:7
[10256.202051] =====>rtl8192_set_chan()====ch:8
[10256.321948] =====>rtl8192_set_chan()====ch:9
[10256.441877] =====>rtl8192_set_chan()====ch:10
[10256.561713] =====>rtl8192_set_chan()====ch:11
[10256.681684] =====>rtl8192_set_chan()====ch:12
[10256.801601] =====>rtl8192_set_chan()====ch:13
[10256.923123] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10256.923159] ===>rtllib_associate_procedure_wq(), chan:1
[10256.923168] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10256.923175] =====>rtl8192_set_chan()====ch:1
[10256.933553] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10256.933576] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10256.934176] ===>rtllib_associate_procedure_wq(), chan:1
[10256.934186] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10256.934195] =====>rtl8192_set_chan()====ch:1
[10256.946072] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10256.949981] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10256.949989] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10256.949995] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10256.950000] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10256.950006] Associated successfully
[10256.950009] normal associate
[10256.950020] Using G rates:108
[10256.950024] Successfully associated, ht not enabled(0, 0)
[10256.950030] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10256.950040] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10256.951454] RX: IEEE802.1X EAPOL frame!
[10256.958323] RX: IEEE802.1X EAPOL frame!
[10256.958496] alg name:TKIP
[10256.959137] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10256.965713] RX: IEEE802.1X EAPOL frame!
[10256.965905] alg name:TKIP
[10256.966530] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10268.584763] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10268.643050] =====>rtl8192_set_chan()====ch:1
[10268.762928] =====>rtl8192_set_chan()====ch:2
[10268.882848] =====>rtl8192_set_chan()====ch:3
[10269.002784] =====>rtl8192_set_chan()====ch:4
[10269.122743] =====>rtl8192_set_chan()====ch:5
[10269.242603] =====>rtl8192_set_chan()====ch:6
[10269.362662] =====>rtl8192_set_chan()====ch:7
[10269.482501] =====>rtl8192_set_chan()====ch:8
[10269.605440] =====>rtl8192_set_chan()====ch:9
[10269.722253] =====>rtl8192_set_chan()====ch:10
[10269.842132] =====>rtl8192_set_chan()====ch:11
[10269.962068] =====>rtl8192_set_chan()====ch:12
[10270.081927] =====>rtl8192_set_chan()====ch:13
[10270.201936] =====>rtl8192_set_chan()====ch:1
[10270.212198] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10270.212210] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10294.245130] ==========>received disassoc/deauth(c0) frame, reason code:a
[10294.245183] notify_wx_assoc_event(): Tell user space disconnected
[10294.245199] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10294.245204] ====>remove Tx_TS_admin_list
[10294.245210] ====>remove Tx_TS_admin_list
[10294.245263] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10294.472415] =====>rtl8192_set_chan()====ch:1
[10294.584284] =====>rtl8192_set_chan()====ch:2
[10294.704209] =====>rtl8192_set_chan()====ch:3
[10294.824075] =====>rtl8192_set_chan()====ch:4
[10294.944036] =====>rtl8192_set_chan()====ch:5
[10295.063952] =====>rtl8192_set_chan()====ch:6
[10295.183828] =====>rtl8192_set_chan()====ch:7
[10295.303743] =====>rtl8192_set_chan()====ch:8
[10295.423649] =====>rtl8192_set_chan()====ch:9
[10295.543659] =====>rtl8192_set_chan()====ch:10
[10295.663543] =====>rtl8192_set_chan()====ch:11
[10295.783435] =====>rtl8192_set_chan()====ch:12
[10295.903327] =====>rtl8192_set_chan()====ch:13
[10296.024194] ===>rtllib_start_scan()
[10296.024255] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10296.024275] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10296.024471] ===>rtllib_associate_procedure_wq(), chan:1
[10296.024477] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10296.024483] =====>rtl8192_set_chan()====ch:1
[10296.036293] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10296.041279] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10296.041286] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10296.041291] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10296.041297] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10296.041302] Associated successfully
[10296.041305] normal associate
[10296.041320] Using G rates:108
[10296.041324] Successfully associated, ht not enabled(0, 0)
[10296.041330] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10296.041338] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10296.041711] RX: IEEE802.1X EAPOL frame!
[10296.049814] RX: IEEE802.1X EAPOL frame!
[10296.049984] alg name:TKIP
[10296.050612] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10296.055079] RX: IEEE802.1X EAPOL frame!
[10296.055354] alg name:TKIP
[10296.055982] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10315.073924] ==========>received disassoc/deauth(c0) frame, reason code:a
[10315.073979] notify_wx_assoc_event(): Tell user space disconnected
[10315.073994] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10315.074000] ====>remove Tx_TS_admin_list
[10315.074006] ====>remove Tx_TS_admin_list
[10315.074058] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10315.175772] =====>rtl8192_set_chan()====ch:1
[10315.289335] =====>rtl8192_set_chan()====ch:2
[10315.409281] =====>rtl8192_set_chan()====ch:3
[10315.529094] =====>rtl8192_set_chan()====ch:4
[10315.649074] =====>rtl8192_set_chan()====ch:5
[10315.769062] =====>rtl8192_set_chan()====ch:6
[10315.888891] =====>rtl8192_set_chan()====ch:7
[10316.008822] =====>rtl8192_set_chan()====ch:8
[10316.128754] =====>rtl8192_set_chan()====ch:9
[10316.248604] =====>rtl8192_set_chan()====ch:10
[10316.368513] =====>rtl8192_set_chan()====ch:11
[10316.488420] =====>rtl8192_set_chan()====ch:12
[10316.608333] =====>rtl8192_set_chan()====ch:13
[10316.729293] ===>rtllib_start_scan()
[10316.729378] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10316.729396] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10316.729516] ===>rtllib_associate_procedure_wq(), chan:1
[10316.729522] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10316.729527] =====>rtl8192_set_chan()====ch:1
[10316.743361] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10316.747233] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10316.747238] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10316.747241] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10316.747245] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10316.747248] Associated successfully
[10316.747250] normal associate
[10316.747259] Using G rates:108
[10316.747262] Successfully associated, ht not enabled(0, 0)
[10316.747266] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10316.747272] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10316.748801] RX: IEEE802.1X EAPOL frame!
[10316.755680] RX: IEEE802.1X EAPOL frame!
[10316.755912] alg name:TKIP
[10316.756572] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10316.760912] RX: IEEE802.1X EAPOL frame!
[10316.761056] alg name:TKIP
[10316.761678] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10331.208317] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10331.208328] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10331.208334] ====>remove Tx_TS_admin_list
[10331.208340] ====>remove Tx_TS_admin_list
[10331.208350] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10331.208362] notify_wx_assoc_event(): Tell user space disconnected
[10331.308852] =====>rtl8192_set_chan()====ch:1
[10331.427705] =====>rtl8192_set_chan()====ch:2
[10331.547623] =====>rtl8192_set_chan()====ch:3
[10331.667566] =====>rtl8192_set_chan()====ch:4
[10331.787456] =====>rtl8192_set_chan()====ch:5
[10331.907349] =====>rtl8192_set_chan()====ch:6
[10332.027205] =====>rtl8192_set_chan()====ch:7
[10332.147095] =====>rtl8192_set_chan()====ch:8
[10332.267087] =====>rtl8192_set_chan()====ch:9
[10332.386993] =====>rtl8192_set_chan()====ch:10
[10332.506828] =====>rtl8192_set_chan()====ch:11
[10332.626815] =====>rtl8192_set_chan()====ch:12
[10332.746716] =====>rtl8192_set_chan()====ch:13
[10332.867922] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10332.868046] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10332.868074] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10332.868150] ===>rtllib_associate_procedure_wq(), chan:1
[10332.868160] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10332.868170] =====>rtl8192_set_chan()====ch:1
[10332.879968] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10332.885429] RX: IEEE802.1X EAPOL frame!
[10332.885741] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10332.885746] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10332.885749] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10332.885753] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10332.885756] Associated successfully
[10332.885758] normal associate
[10332.885766] Using G rates:108
[10332.885768] Successfully associated, ht not enabled(0, 0)
[10332.885772] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10332.885779] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10332.892965] RX: IEEE802.1X EAPOL frame!
[10332.893121] alg name:TKIP
[10332.893751] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10332.898238] RX: IEEE802.1X EAPOL frame!
[10332.898425] alg name:TKIP
[10332.899051] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10353.192288] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10353.192296] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10353.192299] ====>remove Tx_TS_admin_list
[10353.192303] ====>remove Tx_TS_admin_list
[10353.192310] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10353.192319] notify_wx_assoc_event(): Tell user space disconnected
[10353.292698] =====>rtl8192_set_chan()====ch:1
[10353.411785] =====>rtl8192_set_chan()====ch:2
[10353.531784] =====>rtl8192_set_chan()====ch:3
[10353.651599] =====>rtl8192_set_chan()====ch:4
[10353.771525] =====>rtl8192_set_chan()====ch:5
[10353.891466] =====>rtl8192_set_chan()====ch:6
[10354.011419] =====>rtl8192_set_chan()====ch:7
[10354.131279] =====>rtl8192_set_chan()====ch:8
[10354.251164] =====>rtl8192_set_chan()====ch:9
[10354.371076] =====>rtl8192_set_chan()====ch:10
[10354.490995] =====>rtl8192_set_chan()====ch:11
[10354.610939] =====>rtl8192_set_chan()====ch:12
[10354.730814] =====>rtl8192_set_chan()====ch:13
[10354.851483] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10354.851622] ===>rtllib_associate_procedure_wq(), chan:1
[10354.851628] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10354.851634] =====>rtl8192_set_chan()====ch:1
[10354.862006] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10354.862025] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10354.862837] ===>rtllib_associate_procedure_wq(), chan:1
[10354.862843] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10354.862848] =====>rtl8192_set_chan()====ch:1
[10354.874906] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10354.880527] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10354.880531] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10354.880534] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10354.880537] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10354.880540] Associated successfully
[10354.880543] normal associate
[10354.880549] Using G rates:108
[10354.880552] Successfully associated, ht not enabled(0, 0)
[10354.880556] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10354.880562] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10354.882035] RX: IEEE802.1X EAPOL frame!
[10354.891145] RX: IEEE802.1X EAPOL frame!
[10354.891421] alg name:TKIP
[10354.892069] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10354.896618] RX: IEEE802.1X EAPOL frame!
[10354.897081] alg name:TKIP
[10354.897707] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10377.174942] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10377.174949] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10377.174953] ====>remove Tx_TS_admin_list
[10377.174957] ====>remove Tx_TS_admin_list
[10377.174963] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10377.174974] notify_wx_assoc_event(): Tell user space disconnected
[10377.275303] =====>rtl8192_set_chan()====ch:1
[10377.394434] =====>rtl8192_set_chan()====ch:2
[10377.514451] =====>rtl8192_set_chan()====ch:3
[10377.634293] =====>rtl8192_set_chan()====ch:4
[10377.754195] =====>rtl8192_set_chan()====ch:5
[10377.874140] =====>rtl8192_set_chan()====ch:6
[10377.994023] =====>rtl8192_set_chan()====ch:7
[10378.113928] =====>rtl8192_set_chan()====ch:8
[10378.233820] =====>rtl8192_set_chan()====ch:9
[10378.353761] =====>rtl8192_set_chan()====ch:10
[10378.473639] =====>rtl8192_set_chan()====ch:11
[10378.593591] =====>rtl8192_set_chan()====ch:12
[10378.713497] =====>rtl8192_set_chan()====ch:13
[10378.834058] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10378.834075] ===>rtllib_associate_procedure_wq(), chan:1
[10378.834079] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10378.834083] =====>rtl8192_set_chan()====ch:1
[10378.844444] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10378.844462] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10378.845278] ===>rtllib_associate_procedure_wq(), chan:1
[10378.845283] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10378.845287] =====>rtl8192_set_chan()====ch:1
[10378.857329] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10378.861323] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10378.861331] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10378.861336] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10378.861342] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10378.861347] Associated successfully
[10378.861351] normal associate
[10378.861361] Using G rates:108
[10378.861365] Successfully associated, ht not enabled(0, 0)
[10378.861371] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10378.861381] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10378.862792] RX: IEEE802.1X EAPOL frame!
[10378.869472] RX: IEEE802.1X EAPOL frame!
[10378.869699] alg name:TKIP
[10378.870332] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10378.874899] RX: IEEE802.1X EAPOL frame!
[10378.875330] alg name:TKIP
[10378.875954] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10389.499004] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[10389.499139] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10389.555712] =====>rtl8192_set_chan()====ch:1
[10389.675570] =====>rtl8192_set_chan()====ch:2
[10389.795536] =====>rtl8192_set_chan()====ch:3
[10389.915431] =====>rtl8192_set_chan()====ch:4
[10390.035334] =====>rtl8192_set_chan()====ch:5
[10390.155261] =====>rtl8192_set_chan()====ch:6
[10390.275162] =====>rtl8192_set_chan()====ch:7
[10390.394993] =====>rtl8192_set_chan()====ch:8
[10390.514994] =====>rtl8192_set_chan()====ch:9
[10390.634899] =====>rtl8192_set_chan()====ch:10
[10390.754770] =====>rtl8192_set_chan()====ch:11
[10390.874704] =====>rtl8192_set_chan()====ch:12
[10390.994652] =====>rtl8192_set_chan()====ch:13
[10391.114590] =====>rtl8192_set_chan()====ch:1
[10391.124667] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10391.124681] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10411.150741] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10411.150753] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10411.150759] ====>remove Tx_TS_admin_list
[10411.150765] ====>remove Tx_TS_admin_list
[10411.150774] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10411.150785] notify_wx_assoc_event(): Tell user space disconnected
[10411.251188] =====>rtl8192_set_chan()====ch:1
[10411.369880] =====>rtl8192_set_chan()====ch:2
[10411.489846] =====>rtl8192_set_chan()====ch:3
[10411.609748] =====>rtl8192_set_chan()====ch:4
[10411.729633] =====>rtl8192_set_chan()====ch:5
[10411.849552] =====>rtl8192_set_chan()====ch:6
[10411.969466] =====>rtl8192_set_chan()====ch:7
[10412.089367] =====>rtl8192_set_chan()====ch:8
[10412.209281] =====>rtl8192_set_chan()====ch:9
[10412.329214] =====>rtl8192_set_chan()====ch:10
[10412.449173] =====>rtl8192_set_chan()====ch:11
[10412.569044] =====>rtl8192_set_chan()====ch:12
[10412.688956] =====>rtl8192_set_chan()====ch:13
[10412.809584] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10412.809628] ===>rtllib_associate_procedure_wq(), chan:1
[10412.809633] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10412.809639] =====>rtl8192_set_chan()====ch:1
[10412.820091] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10412.820113] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10412.821052] ===>rtllib_associate_procedure_wq(), chan:1
[10412.821059] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10412.821063] =====>rtl8192_set_chan()====ch:1
[10412.832860] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10412.836839] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10412.836847] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10412.836853] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10412.836859] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10412.836864] Associated successfully
[10412.836868] normal associate
[10412.836878] Using G rates:108
[10412.836882] Successfully associated, ht not enabled(0, 0)
[10412.836888] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10412.836898] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10412.838295] RX: IEEE802.1X EAPOL frame!
[10412.844710] RX: IEEE802.1X EAPOL frame!
[10412.844953] alg name:TKIP
[10412.845588] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10412.849961] RX: IEEE802.1X EAPOL frame!
[10412.850174] alg name:TKIP
[10412.850802] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10437.131810] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10437.131822] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10437.131827] ====>remove Tx_TS_admin_list
[10437.131833] ====>remove Tx_TS_admin_list
[10437.131843] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10437.131910] notify_wx_assoc_event(): Tell user space disconnected
[10437.232526] =====>rtl8192_set_chan()====ch:1
[10437.351147] =====>rtl8192_set_chan()====ch:2
[10437.470991] =====>rtl8192_set_chan()====ch:3
[10437.590962] =====>rtl8192_set_chan()====ch:4
[10437.710869] =====>rtl8192_set_chan()====ch:5
[10437.830816] =====>rtl8192_set_chan()====ch:6
[10437.950695] =====>rtl8192_set_chan()====ch:7
[10438.070613] =====>rtl8192_set_chan()====ch:8
[10438.190573] =====>rtl8192_set_chan()====ch:9
[10438.310429] =====>rtl8192_set_chan()====ch:10
[10438.430328] =====>rtl8192_set_chan()====ch:11
[10438.550257] =====>rtl8192_set_chan()====ch:12
[10438.670124] =====>rtl8192_set_chan()====ch:13
[10438.790789] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10438.790808] ===>rtllib_associate_procedure_wq(), chan:1
[10438.790812] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10438.790815] =====>rtl8192_set_chan()====ch:1
[10438.801223] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10438.801250] ===>rtllib_associate_procedure_wq(), chan:1
[10438.801263] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10438.801268] =====>rtl8192_set_chan()====ch:1
[10438.811783] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10438.812812] ===>rtllib_associate_procedure_wq(), chan:1
[10438.812823] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10438.812832] =====>rtl8192_set_chan()====ch:1
[10438.825349] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10438.829281] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10438.829292] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10438.829300] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10438.829308] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10438.829316] Associated successfully
[10438.829321] normal associate
[10438.829334] Using G rates:108
[10438.829340] Successfully associated, ht not enabled(0, 0)
[10438.829349] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10438.829362] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10438.830783] RX: IEEE802.1X EAPOL frame!
[10438.837692] RX: IEEE802.1X EAPOL frame!
[10438.837911] alg name:TKIP
[10438.838543] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10438.843299] RX: IEEE802.1X EAPOL frame!
[10438.843831] alg name:TKIP
[10438.844464] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10449.130058] ==========>received disassoc/deauth(c0) frame, reason code:a
[10449.130090] notify_wx_assoc_event(): Tell user space disconnected
[10449.130100] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10449.130103] ====>remove Tx_TS_admin_list
[10449.130107] ====>remove Tx_TS_admin_list
[10449.130144] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10449.284083] =====>rtl8192_set_chan()====ch:1
[10449.402428] =====>rtl8192_set_chan()====ch:2
[10449.522363] =====>rtl8192_set_chan()====ch:3
[10449.642266] =====>rtl8192_set_chan()====ch:4
[10449.762166] =====>rtl8192_set_chan()====ch:5
[10449.882132] =====>rtl8192_set_chan()====ch:6
[10450.001975] =====>rtl8192_set_chan()====ch:7
[10450.121914] =====>rtl8192_set_chan()====ch:8
[10450.241848] =====>rtl8192_set_chan()====ch:9
[10450.361748] =====>rtl8192_set_chan()====ch:10
[10450.481643] =====>rtl8192_set_chan()====ch:11
[10450.601606] =====>rtl8192_set_chan()====ch:12
[10450.721466] =====>rtl8192_set_chan()====ch:13
[10450.842033] ===>rtllib_start_scan()
[10450.842055] =====>rtl8192_set_chan()====ch:2
[10450.852196] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10450.852343] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10450.852774] ===>rtllib_associate_procedure_wq(), chan:1
[10450.852780] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10450.852785] =====>rtl8192_set_chan()====ch:1
[10450.864638] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10450.870301] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10450.870309] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10450.870315] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10450.870321] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10450.870326] Associated successfully
[10450.870330] normal associate
[10450.870344] Using G rates:108
[10450.870348] Successfully associated, ht not enabled(0, 0)
[10450.870355] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10450.870364] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10450.871750] RX: IEEE802.1X EAPOL frame!
[10450.879621] RX: IEEE802.1X EAPOL frame!
[10450.879855] alg name:TKIP
[10450.880558] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10450.884873] RX: IEEE802.1X EAPOL frame!
[10450.885153] alg name:TKIP
[10450.885781] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10471.107094] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10471.107101] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10471.107105] ====>remove Tx_TS_admin_list
[10471.107108] ====>remove Tx_TS_admin_list
[10471.107115] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10471.107128] notify_wx_assoc_event(): Tell user space disconnected
[10471.207468] =====>rtl8192_set_chan()====ch:1
[10471.326632] =====>rtl8192_set_chan()====ch:2
[10471.446502] =====>rtl8192_set_chan()====ch:3
[10471.566454] =====>rtl8192_set_chan()====ch:4
[10471.686321] =====>rtl8192_set_chan()====ch:5
[10471.806188] =====>rtl8192_set_chan()====ch:6
[10471.926143] =====>rtl8192_set_chan()====ch:7
[10472.046059] =====>rtl8192_set_chan()====ch:8
[10472.166042] =====>rtl8192_set_chan()====ch:9
[10472.285891] =====>rtl8192_set_chan()====ch:10
[10472.405791] =====>rtl8192_set_chan()====ch:11
[10472.525700] =====>rtl8192_set_chan()====ch:12
[10472.645628] =====>rtl8192_set_chan()====ch:13
[10472.767339] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10472.767379] ===>rtllib_associate_procedure_wq(), chan:1
[10472.767388] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10472.767397] =====>rtl8192_set_chan()====ch:1
[10472.777942] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10472.777965] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10472.778701] ===>rtllib_associate_procedure_wq(), chan:1
[10472.778707] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10472.778712] =====>rtl8192_set_chan()====ch:1
[10472.790480] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10472.794466] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10472.794474] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10472.794480] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10472.794486] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10472.794491] Associated successfully
[10472.794495] normal associate
[10472.794506] Using G rates:108
[10472.794510] Successfully associated, ht not enabled(0, 0)
[10472.794517] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10472.794526] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10472.795915] RX: IEEE802.1X EAPOL frame!
[10472.803650] RX: IEEE802.1X EAPOL frame!
[10472.803886] alg name:TKIP
[10472.804521] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10472.809222] RX: IEEE802.1X EAPOL frame!
[10472.809431] alg name:TKIP
[10472.810047] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10490.974275] DHCP pkt src port:68, dest port:67!!
[10510.412515] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10510.468440] =====>rtl8192_set_chan()====ch:1
[10510.588301] =====>rtl8192_set_chan()====ch:2
[10510.708156] =====>rtl8192_set_chan()====ch:3
[10510.828040] =====>rtl8192_set_chan()====ch:4
[10510.947935] =====>rtl8192_set_chan()====ch:5
[10511.067910] =====>rtl8192_set_chan()====ch:6
[10511.187777] =====>rtl8192_set_chan()====ch:7
[10511.307696] =====>rtl8192_set_chan()====ch:8
[10511.427596] =====>rtl8192_set_chan()====ch:9
[10511.547526] =====>rtl8192_set_chan()====ch:10
[10511.667436] =====>rtl8192_set_chan()====ch:11
[10511.787352] =====>rtl8192_set_chan()====ch:12
[10511.907251] =====>rtl8192_set_chan()====ch:13
[10512.027220] =====>rtl8192_set_chan()====ch:1
[10512.037470] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10512.037482] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10537.069563] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10537.069570] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10537.069574] ====>remove Tx_TS_admin_list
[10537.069577] ====>remove Tx_TS_admin_list
[10537.069584] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10537.069596] notify_wx_assoc_event(): Tell user space disconnected
[10537.169943] =====>rtl8192_set_chan()====ch:1
[10537.288861] =====>rtl8192_set_chan()====ch:2
[10537.408836] =====>rtl8192_set_chan()====ch:3
[10537.528776] =====>rtl8192_set_chan()====ch:4
[10537.648663] =====>rtl8192_set_chan()====ch:5
[10537.768574] =====>rtl8192_set_chan()====ch:6
[10537.888475] =====>rtl8192_set_chan()====ch:7
[10538.008433] =====>rtl8192_set_chan()====ch:8
[10538.128351] =====>rtl8192_set_chan()====ch:9
[10538.248233] =====>rtl8192_set_chan()====ch:10
[10538.368177] =====>rtl8192_set_chan()====ch:11
[10538.488037] =====>rtl8192_set_chan()====ch:12
[10538.607955] =====>rtl8192_set_chan()====ch:13
[10538.728994] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10538.729056] ===>rtllib_associate_procedure_wq(), chan:1
[10538.729062] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10538.729068] =====>rtl8192_set_chan()====ch:1
[10538.739493] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10538.739511] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10538.740160] ===>rtllib_associate_procedure_wq(), chan:1
[10538.740169] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10538.740177] =====>rtl8192_set_chan()====ch:1
[10538.752324] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10538.756319] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10538.756330] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10538.756339] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10538.756348] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10538.756356] Associated successfully
[10538.756361] normal associate
[10538.756375] Using G rates:108
[10538.756381] Successfully associated, ht not enabled(0, 0)
[10538.756390] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10538.756404] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10538.757813] RX: IEEE802.1X EAPOL frame!
[10538.764240] RX: IEEE802.1X EAPOL frame!
[10538.764450] alg name:TKIP
[10538.765084] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10538.769587] RX: IEEE802.1X EAPOL frame!
[10538.770012] alg name:TKIP
[10538.770636] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10557.054965] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10557.054973] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10557.054976] ====>remove Tx_TS_admin_list
[10557.054980] ====>remove Tx_TS_admin_list
[10557.054987] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10557.054999] notify_wx_assoc_event(): Tell user space disconnected
[10557.155337] =====>rtl8192_set_chan()====ch:1
[10557.274471] =====>rtl8192_set_chan()====ch:2
[10557.394470] =====>rtl8192_set_chan()====ch:3
[10557.514293] =====>rtl8192_set_chan()====ch:4
[10557.634223] =====>rtl8192_set_chan()====ch:5
[10557.754169] =====>rtl8192_set_chan()====ch:6
[10557.874058] =====>rtl8192_set_chan()====ch:7
[10557.993949] =====>rtl8192_set_chan()====ch:8
[10558.113881] =====>rtl8192_set_chan()====ch:9
[10558.233773] =====>rtl8192_set_chan()====ch:10
[10558.353753] =====>rtl8192_set_chan()====ch:11
[10558.473602] =====>rtl8192_set_chan()====ch:12
[10558.593541] =====>rtl8192_set_chan()====ch:13
[10558.714470] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10558.714494] ===>rtllib_associate_procedure_wq(), chan:1
[10558.714499] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10558.714504] =====>rtl8192_set_chan()====ch:1
[10558.724961] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10558.724980] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10558.725693] ===>rtllib_associate_procedure_wq(), chan:1
[10558.725699] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10558.725703] =====>rtl8192_set_chan()====ch:1
[10558.738137] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10558.743757] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10558.743765] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10558.743771] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10558.743777] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10558.743783] Associated successfully
[10558.743786] normal associate
[10558.743796] Using G rates:108
[10558.743801] Successfully associated, ht not enabled(0, 0)
[10558.743807] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10558.743816] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10558.745252] RX: IEEE802.1X EAPOL frame!
[10558.752062] RX: IEEE802.1X EAPOL frame!
[10558.752306] alg name:TKIP
[10558.752955] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10558.760621] RX: IEEE802.1X EAPOL frame!
[10558.761050] alg name:TKIP
[10558.761666] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10573.043354] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10573.043362] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10573.043365] ====>remove Tx_TS_admin_list
[10573.043369] ====>remove Tx_TS_admin_list
[10573.043375] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10573.043389] notify_wx_assoc_event(): Tell user space disconnected
[10573.143863] =====>rtl8192_set_chan()====ch:1
[10573.262935] =====>rtl8192_set_chan()====ch:2
[10573.382845] =====>rtl8192_set_chan()====ch:3
[10573.502783] =====>rtl8192_set_chan()====ch:4
[10573.622641] =====>rtl8192_set_chan()====ch:5
[10573.742577] =====>rtl8192_set_chan()====ch:6
[10573.862544] =====>rtl8192_set_chan()====ch:7
[10573.982408] =====>rtl8192_set_chan()====ch:8
[10574.102373] =====>rtl8192_set_chan()====ch:9
[10574.222270] =====>rtl8192_set_chan()====ch:10
[10574.342170] =====>rtl8192_set_chan()====ch:11
[10574.462113] =====>rtl8192_set_chan()====ch:12
[10574.582051] =====>rtl8192_set_chan()====ch:13
[10574.702662] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10574.702714] ===>rtllib_associate_procedure_wq(), chan:1
[10574.702719] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10574.702724] =====>rtl8192_set_chan()====ch:1
[10574.713078] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10574.713091] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10574.713565] ===>rtllib_associate_procedure_wq(), chan:1
[10574.713572] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10574.713577] =====>rtl8192_set_chan()====ch:1
[10574.725817] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10574.729737] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10574.729744] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10574.729749] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10574.729755] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10574.729760] Associated successfully
[10574.729764] normal associate
[10574.729774] Using G rates:108
[10574.729778] Successfully associated, ht not enabled(0, 0)
[10574.729784] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10574.729793] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10574.731216] RX: IEEE802.1X EAPOL frame!
[10574.738238] RX: IEEE802.1X EAPOL frame!
[10574.738447] alg name:TKIP
[10574.739079] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10574.746016] RX: IEEE802.1X EAPOL frame!
[10574.746445] alg name:TKIP
[10574.747070] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10595.027588] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10595.027596] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10595.027599] ====>remove Tx_TS_admin_list
[10595.027603] ====>remove Tx_TS_admin_list
[10595.027609] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10595.027674] notify_wx_assoc_event(): Tell user space disconnected
[10595.128170] =====>rtl8192_set_chan()====ch:1
[10595.247028] =====>rtl8192_set_chan()====ch:2
[10595.366968] =====>rtl8192_set_chan()====ch:3
[10595.486934] =====>rtl8192_set_chan()====ch:4
[10595.606735] =====>rtl8192_set_chan()====ch:5
[10595.726699] =====>rtl8192_set_chan()====ch:6
[10595.846593] =====>rtl8192_set_chan()====ch:7
[10595.966523] =====>rtl8192_set_chan()====ch:8
[10596.086458] =====>rtl8192_set_chan()====ch:9
[10596.206355] =====>rtl8192_set_chan()====ch:10
[10596.326291] =====>rtl8192_set_chan()====ch:11
[10596.446295] =====>rtl8192_set_chan()====ch:12
[10596.566100] =====>rtl8192_set_chan()====ch:13
[10596.687709] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10596.687914] ===>rtllib_associate_procedure_wq(), chan:1
[10596.687925] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10596.687934] =====>rtl8192_set_chan()====ch:1
[10596.698215] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10596.698228] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10596.698997] ===>rtllib_associate_procedure_wq(), chan:1
[10596.699002] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10596.699007] =====>rtl8192_set_chan()====ch:1
[10596.711438] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10596.715398] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10596.715406] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10596.715412] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10596.715418] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10596.715423] Associated successfully
[10596.715427] normal associate
[10596.715438] Using G rates:108
[10596.715442] Successfully associated, ht not enabled(0, 0)
[10596.715449] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10596.715458] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10596.716909] RX: IEEE802.1X EAPOL frame!
[10596.723635] RX: IEEE802.1X EAPOL frame!
[10596.723830] alg name:TKIP
[10596.724468] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10596.728841] RX: IEEE802.1X EAPOL frame!
[10596.729063] alg name:TKIP
[10596.729687] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10613.014509] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10613.014517] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10613.014520] ====>remove Tx_TS_admin_list
[10613.014524] ====>remove Tx_TS_admin_list
[10613.014530] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10613.014539] notify_wx_assoc_event(): Tell user space disconnected
[10613.114962] =====>rtl8192_set_chan()====ch:1
[10613.234031] =====>rtl8192_set_chan()====ch:2
[10613.353944] =====>rtl8192_set_chan()====ch:3
[10613.473854] =====>rtl8192_set_chan()====ch:4
[10613.593781] =====>rtl8192_set_chan()====ch:5
[10613.713719] =====>rtl8192_set_chan()====ch:6
[10613.833586] =====>rtl8192_set_chan()====ch:7
[10613.953504] =====>rtl8192_set_chan()====ch:8
[10614.073422] =====>rtl8192_set_chan()====ch:9
[10614.193329] =====>rtl8192_set_chan()====ch:10
[10614.313244] =====>rtl8192_set_chan()====ch:11
[10614.433159] =====>rtl8192_set_chan()====ch:12
[10614.553067] =====>rtl8192_set_chan()====ch:13
[10614.674039] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10614.674078] ===>rtllib_associate_procedure_wq(), chan:1
[10614.674087] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10614.674096] =====>rtl8192_set_chan()====ch:1
[10614.684754] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10614.684782] ===>rtllib_associate_procedure_wq(), chan:1
[10614.684790] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10614.684799] =====>rtl8192_set_chan()====ch:1
[10614.695103] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10614.696155] ===>rtllib_associate_procedure_wq(), chan:1
[10614.696166] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10614.696175] =====>rtl8192_set_chan()====ch:1
[10614.708270] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10614.712223] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10614.712229] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10614.712234] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10614.712239] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10614.712244] Associated successfully
[10614.712247] normal associate
[10614.712255] Using G rates:108
[10614.712259] Successfully associated, ht not enabled(0, 0)
[10614.712265] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10614.712273] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10614.713657] RX: IEEE802.1X EAPOL frame!
[10614.720196] RX: IEEE802.1X EAPOL frame!
[10614.720439] alg name:TKIP
[10614.721090] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10614.727314] RX: IEEE802.1X EAPOL frame!
[10614.727732] alg name:TKIP
[10614.728358] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10629.002932] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10629.002940] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10629.002943] ====>remove Tx_TS_admin_list
[10629.002947] ====>remove Tx_TS_admin_list
[10629.002954] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10629.002965] notify_wx_assoc_event(): Tell user space disconnected
[10629.103343] =====>rtl8192_set_chan()====ch:1
[10629.222468] =====>rtl8192_set_chan()====ch:2
[10629.342375] =====>rtl8192_set_chan()====ch:3
[10629.462324] =====>rtl8192_set_chan()====ch:4
[10629.582206] =====>rtl8192_set_chan()====ch:5
[10629.702103] =====>rtl8192_set_chan()====ch:6
[10629.822037] =====>rtl8192_set_chan()====ch:7
[10629.941953] =====>rtl8192_set_chan()====ch:8
[10630.061894] =====>rtl8192_set_chan()====ch:9
[10630.181783] =====>rtl8192_set_chan()====ch:10
[10630.301734] =====>rtl8192_set_chan()====ch:11
[10630.421623] =====>rtl8192_set_chan()====ch:12
[10630.541544] =====>rtl8192_set_chan()====ch:13
[10630.662959] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10630.662997] ===>rtllib_associate_procedure_wq(), chan:1
[10630.663005] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10630.663013] =====>rtl8192_set_chan()====ch:1
[10630.673191] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10630.673222] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10630.673426] ===>rtllib_associate_procedure_wq(), chan:1
[10630.673431] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10630.673436] =====>rtl8192_set_chan()====ch:1
[10630.685860] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10630.690875] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10630.690880] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10630.690885] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10630.690889] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10630.690893] Associated successfully
[10630.690896] normal associate
[10630.690904] Using G rates:108
[10630.690907] Successfully associated, ht not enabled(0, 0)
[10630.690913] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10630.690921] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10630.692451] RX: IEEE802.1X EAPOL frame!
[10630.698226] RX: IEEE802.1X EAPOL frame!
[10630.698396] alg name:TKIP
[10630.699027] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10630.705574] RX: IEEE802.1X EAPOL frame!
[10630.705763] alg name:TKIP
[10630.706389] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10631.322947] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10631.380939] =====>rtl8192_set_chan()====ch:1
[10631.500868] =====>rtl8192_set_chan()====ch:2
[10631.620781] =====>rtl8192_set_chan()====ch:3
[10631.740645] =====>rtl8192_set_chan()====ch:4
[10631.860510] =====>rtl8192_set_chan()====ch:5
[10631.980408] =====>rtl8192_set_chan()====ch:6
[10632.100389] =====>rtl8192_set_chan()====ch:7
[10632.220309] =====>rtl8192_set_chan()====ch:8
[10632.340281] =====>rtl8192_set_chan()====ch:9
[10632.460157] =====>rtl8192_set_chan()====ch:10
[10632.580052] =====>rtl8192_set_chan()====ch:11
[10632.699988] =====>rtl8192_set_chan()====ch:12
[10632.819968] =====>rtl8192_set_chan()====ch:13
[10632.939813] =====>rtl8192_set_chan()====ch:1
[10632.949886] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10632.949901] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10646.220448] ==========>received disassoc/deauth(c0) frame, reason code:a
[10646.220476] notify_wx_assoc_event(): Tell user space disconnected
[10646.220495] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10646.220502] ====>remove Tx_TS_admin_list
[10646.220511] ====>remove Tx_TS_admin_list
[10646.220569] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10646.362656] =====>rtl8192_set_chan()====ch:1
[10646.490087] =====>rtl8192_set_chan()====ch:2
[10646.609907] =====>rtl8192_set_chan()====ch:3
[10646.729896] =====>rtl8192_set_chan()====ch:4
[10646.849743] =====>rtl8192_set_chan()====ch:5
[10646.969676] =====>rtl8192_set_chan()====ch:6
[10647.089619] =====>rtl8192_set_chan()====ch:7
[10647.209494] =====>rtl8192_set_chan()====ch:8
[10647.329384] =====>rtl8192_set_chan()====ch:9
[10647.449320] =====>rtl8192_set_chan()====ch:10
[10647.569184] =====>rtl8192_set_chan()====ch:11
[10647.689189] =====>rtl8192_set_chan()====ch:12
[10647.809074] =====>rtl8192_set_chan()====ch:13
[10647.930835] ===>rtllib_start_scan()
[10647.930872] =====>rtl8192_set_chan()====ch:2
[10647.941037] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10647.941115] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10647.942167] ===>rtllib_associate_procedure_wq(), chan:1
[10647.942173] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10647.942178] =====>rtl8192_set_chan()====ch:1
[10647.953956] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10647.957887] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10647.957895] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10647.957903] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10647.957907] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10647.957910] Associated successfully
[10647.957912] normal associate
[10647.957922] Using G rates:108
[10647.957924] Successfully associated, ht not enabled(0, 0)
[10647.957928] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10647.957935] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10647.959397] RX: IEEE802.1X EAPOL frame!
[10647.966908] RX: IEEE802.1X EAPOL frame!
[10647.967109] alg name:TKIP
[10647.967771] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10647.972149] RX: IEEE802.1X EAPOL frame!
[10647.972306] alg name:TKIP
[10647.972921] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10672.971243] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10672.971251] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10672.971255] ====>remove Tx_TS_admin_list
[10672.971259] ====>remove Tx_TS_admin_list
[10672.971266] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10672.971329] notify_wx_assoc_event(): Tell user space disconnected
[10673.071851] =====>rtl8192_set_chan()====ch:1
[10673.190691] =====>rtl8192_set_chan()====ch:2
[10673.310659] =====>rtl8192_set_chan()====ch:3
[10673.430517] =====>rtl8192_set_chan()====ch:4
[10673.550517] =====>rtl8192_set_chan()====ch:5
[10673.670540] =====>rtl8192_set_chan()====ch:6
[10673.790263] =====>rtl8192_set_chan()====ch:7
[10673.910190] =====>rtl8192_set_chan()====ch:8
[10674.030061] =====>rtl8192_set_chan()====ch:9
[10674.149940] =====>rtl8192_set_chan()====ch:10
[10674.269934] =====>rtl8192_set_chan()====ch:11
[10674.389781] =====>rtl8192_set_chan()====ch:12
[10674.509706] =====>rtl8192_set_chan()====ch:13
[10674.630963] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10674.631051] ===>rtllib_associate_procedure_wq(), chan:1
[10674.631062] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10674.631071] =====>rtl8192_set_chan()====ch:1
[10674.641550] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10674.641567] ===>rtllib_associate_procedure_wq(), chan:1
[10674.641573] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10674.641578] =====>rtl8192_set_chan()====ch:1
[10674.651799] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10674.652523] ===>rtllib_associate_procedure_wq(), chan:1
[10674.652529] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10674.652534] =====>rtl8192_set_chan()====ch:1
[10674.664753] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10674.668708] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10674.668715] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10674.668721] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10674.668727] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10674.668733] Associated successfully
[10674.668736] normal associate
[10674.668747] Using G rates:108
[10674.668751] Successfully associated, ht not enabled(0, 0)
[10674.668758] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10674.668767] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10674.670176] RX: IEEE802.1X EAPOL frame!
[10674.677603] RX: IEEE802.1X EAPOL frame!
[10674.677865] alg name:TKIP
[10674.678508] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10674.683117] RX: IEEE802.1X EAPOL frame!
[10674.683543] alg name:TKIP
[10674.684158] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10689.946010] ==========>received disassoc/deauth(c0) frame, reason code:a
[10689.946033] notify_wx_assoc_event(): Tell user space disconnected
[10689.946054] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10689.946061] ====>remove Tx_TS_admin_list
[10689.946069] ====>remove Tx_TS_admin_list
[10689.946129] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10690.047911] =====>rtl8192_set_chan()====ch:1
[10690.158430] =====>rtl8192_set_chan()====ch:2
[10690.278369] =====>rtl8192_set_chan()====ch:3
[10690.398305] =====>rtl8192_set_chan()====ch:4
[10690.518183] =====>rtl8192_set_chan()====ch:5
[10690.638095] =====>rtl8192_set_chan()====ch:6
[10690.758015] =====>rtl8192_set_chan()====ch:7
[10690.877915] =====>rtl8192_set_chan()====ch:8
[10690.997833] =====>rtl8192_set_chan()====ch:9
[10691.117745] =====>rtl8192_set_chan()====ch:10
[10691.237648] =====>rtl8192_set_chan()====ch:11
[10691.357561] =====>rtl8192_set_chan()====ch:12
[10691.477483] =====>rtl8192_set_chan()====ch:13
[10691.598497] ===>rtllib_start_scan()
[10691.598582] =====>rtl8192_set_chan()====ch:2
[10691.608725] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10691.608874] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10691.609674] ===>rtllib_associate_procedure_wq(), chan:1
[10691.609680] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10691.609686] =====>rtl8192_set_chan()====ch:1
[10691.621500] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10691.625428] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10691.625436] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10691.625442] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10691.625448] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10691.625453] Associated successfully
[10691.625457] normal associate
[10691.625471] Using G rates:108
[10691.625475] Successfully associated, ht not enabled(0, 0)
[10691.625482] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10691.625491] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10691.626953] RX: IEEE802.1X EAPOL frame!
[10691.635922] RX: IEEE802.1X EAPOL frame!
[10691.636127] alg name:TKIP
[10691.636788] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10691.641196] RX: IEEE802.1X EAPOL frame!
[10691.641331] alg name:TKIP
[10691.641963] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10708.945198] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10708.945205] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10708.945208] ====>remove Tx_TS_admin_list
[10708.945212] ====>remove Tx_TS_admin_list
[10708.945219] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10708.945227] notify_wx_assoc_event(): Tell user space disconnected
[10709.045600] =====>rtl8192_set_chan()====ch:1
[10709.164706] =====>rtl8192_set_chan()====ch:2
[10709.284644] =====>rtl8192_set_chan()====ch:3
[10709.404546] =====>rtl8192_set_chan()====ch:4
[10709.524462] =====>rtl8192_set_chan()====ch:5
[10709.644398] =====>rtl8192_set_chan()====ch:6
[10709.764282] =====>rtl8192_set_chan()====ch:7
[10709.884184] =====>rtl8192_set_chan()====ch:8
[10709.994102] =====>rtl8192_set_chan()====ch:9
[10710.114013] =====>rtl8192_set_chan()====ch:10
[10710.233977] =====>rtl8192_set_chan()====ch:11
[10710.353843] =====>rtl8192_set_chan()====ch:12
[10710.473777] =====>rtl8192_set_chan()====ch:13
[10710.594746] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10710.594835] ===>rtllib_associate_procedure_wq(), chan:1
[10710.594845] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10710.594854] =====>rtl8192_set_chan()====ch:1
[10710.605135] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10710.605148] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10710.605885] ===>rtllib_associate_procedure_wq(), chan:1
[10710.605890] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10710.605895] =====>rtl8192_set_chan()====ch:1
[10710.617724] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10710.621592] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10710.621599] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10710.621605] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10710.621611] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10710.621616] Associated successfully
[10710.621620] normal associate
[10710.621630] Using G rates:108
[10710.621634] Successfully associated, ht not enabled(0, 0)
[10710.621640] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10710.621649] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10710.623158] RX: IEEE802.1X EAPOL frame!
[10710.631351] RX: IEEE802.1X EAPOL frame!
[10710.631604] alg name:TKIP
[10710.632262] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10710.638642] RX: IEEE802.1X EAPOL frame!
[10710.638785] alg name:TKIP
[10710.639401] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10720.924560] ==========>received disassoc/deauth(c0) frame, reason code:a
[10720.924593] notify_wx_assoc_event(): Tell user space disconnected
[10720.924603] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10720.924606] ====>remove Tx_TS_admin_list
[10720.924610] ====>remove Tx_TS_admin_list
[10720.924647] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10721.154701] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10721.154822] =====>rtl8192_set_chan()====ch:1
[10721.265914] =====>rtl8192_set_chan()====ch:2
[10721.385878] =====>rtl8192_set_chan()====ch:3
[10721.505792] =====>rtl8192_set_chan()====ch:4
[10721.625745] =====>rtl8192_set_chan()====ch:5
[10721.745650] =====>rtl8192_set_chan()====ch:6
[10721.865572] =====>rtl8192_set_chan()====ch:7
[10721.985452] =====>rtl8192_set_chan()====ch:8
[10722.105374] =====>rtl8192_set_chan()====ch:9
[10722.225312] =====>rtl8192_set_chan()====ch:10
[10722.345205] =====>rtl8192_set_chan()====ch:11
[10722.465092] =====>rtl8192_set_chan()====ch:12
[10722.585043] =====>rtl8192_set_chan()====ch:13
[10722.706284] ===>rtllib_start_scan()
[10722.706365] =====>rtl8192_set_chan()====ch:2
[10722.716459] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10722.716522] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10722.717422] ===>rtllib_associate_procedure_wq(), chan:1
[10722.717430] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10722.717436] =====>rtl8192_set_chan()====ch:1
[10722.729496] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10722.733407] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10722.733418] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10722.733428] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10722.733438] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10722.733446] Associated successfully
[10722.733452] normal associate
[10722.733470] Using G rates:108
[10722.733477] Successfully associated, ht not enabled(0, 0)
[10722.733487] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10722.733500] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10722.734969] RX: IEEE802.1X EAPOL frame!
[10722.741629] RX: IEEE802.1X EAPOL frame!
[10722.741803] alg name:TKIP
[10722.742437] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10722.747213] RX: IEEE802.1X EAPOL frame!
[10722.747376] alg name:TKIP
[10722.748001] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10746.918141] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10746.918153] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10746.918158] ====>remove Tx_TS_admin_list
[10746.918165] ====>remove Tx_TS_admin_list
[10746.918174] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10746.918240] notify_wx_assoc_event(): Tell user space disconnected
[10747.018899] =====>rtl8192_set_chan()====ch:1
[10747.137228] =====>rtl8192_set_chan()====ch:2
[10747.257124] =====>rtl8192_set_chan()====ch:3
[10747.377099] =====>rtl8192_set_chan()====ch:4
[10747.497015] =====>rtl8192_set_chan()====ch:5
[10747.616964] =====>rtl8192_set_chan()====ch:6
[10747.736896] =====>rtl8192_set_chan()====ch:7
[10747.856744] =====>rtl8192_set_chan()====ch:8
[10747.976676] =====>rtl8192_set_chan()====ch:9
[10748.096585] =====>rtl8192_set_chan()====ch:10
[10748.216491] =====>rtl8192_set_chan()====ch:11
[10748.336444] =====>rtl8192_set_chan()====ch:12
[10748.456321] =====>rtl8192_set_chan()====ch:13
[10748.577801] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10748.577858] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10748.577868] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10748.577903] ===>rtllib_associate_procedure_wq(), chan:1
[10748.577907] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10748.577911] =====>rtl8192_set_chan()====ch:1
[10748.590084] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10748.594052] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10748.594060] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10748.594066] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10748.594072] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10748.594078] Associated successfully
[10748.594082] normal associate
[10748.594091] Using G rates:108
[10748.594096] Successfully associated, ht not enabled(0, 0)
[10748.594102] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10748.594112] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10748.595483] RX: IEEE802.1X EAPOL frame!
[10748.603039] RX: IEEE802.1X EAPOL frame!
[10748.603200] alg name:TKIP
[10748.603824] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10748.609192] RX: IEEE802.1X EAPOL frame!
[10748.609679] alg name:TKIP
[10748.610311] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10752.237147] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10752.293688] =====>rtl8192_set_chan()====ch:1
[10752.413460] =====>rtl8192_set_chan()====ch:2
[10752.533428] =====>rtl8192_set_chan()====ch:3
[10752.653276] =====>rtl8192_set_chan()====ch:4
[10752.773345] =====>rtl8192_set_chan()====ch:5
[10752.893130] =====>rtl8192_set_chan()====ch:6
[10753.013019] =====>rtl8192_set_chan()====ch:7
[10753.132937] =====>rtl8192_set_chan()====ch:8
[10753.252875] =====>rtl8192_set_chan()====ch:9
[10753.372717] =====>rtl8192_set_chan()====ch:10
[10753.492675] =====>rtl8192_set_chan()====ch:11
[10753.612597] =====>rtl8192_set_chan()====ch:12
[10753.732490] =====>rtl8192_set_chan()====ch:13
[10753.852409] =====>rtl8192_set_chan()====ch:1
[10753.862650] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10753.862661] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10770.900430] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10770.900438] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10770.900441] ====>remove Tx_TS_admin_list
[10770.900445] ====>remove Tx_TS_admin_list
[10770.900451] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10770.900460] notify_wx_assoc_event(): Tell user space disconnected
[10771.000843] =====>rtl8192_set_chan()====ch:1
[10771.119936] =====>rtl8192_set_chan()====ch:2
[10771.239854] =====>rtl8192_set_chan()====ch:3
[10771.359792] =====>rtl8192_set_chan()====ch:4
[10771.479692] =====>rtl8192_set_chan()====ch:5
[10771.599614] =====>rtl8192_set_chan()====ch:6
[10771.719508] =====>rtl8192_set_chan()====ch:7
[10771.839421] =====>rtl8192_set_chan()====ch:8
[10771.959516] =====>rtl8192_set_chan()====ch:9
[10772.079227] =====>rtl8192_set_chan()====ch:10
[10772.199148] =====>rtl8192_set_chan()====ch:11
[10772.319103] =====>rtl8192_set_chan()====ch:12
[10772.438983] =====>rtl8192_set_chan()====ch:13
[10772.560152] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10772.560192] ===>rtllib_associate_procedure_wq(), chan:1
[10772.560202] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10772.560211] =====>rtl8192_set_chan()====ch:1
[10772.570567] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10772.570600] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10772.571399] ===>rtllib_associate_procedure_wq(), chan:1
[10772.571404] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10772.571408] =====>rtl8192_set_chan()====ch:1
[10772.583260] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10772.588959] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10772.588967] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10772.588973] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10772.588979] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10772.588984] Associated successfully
[10772.588988] normal associate
[10772.588998] Using G rates:108
[10772.589002] Successfully associated, ht not enabled(0, 0)
[10772.589008] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10772.589017] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10772.590438] RX: IEEE802.1X EAPOL frame!
[10772.597138] RX: IEEE802.1X EAPOL frame!
[10772.597316] alg name:TKIP
[10772.597950] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10772.602419] RX: IEEE802.1X EAPOL frame!
[10772.602668] alg name:TKIP
[10772.603282] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10781.122838] too short to sleep::1000dc, 1000d7, 5
[10796.881772] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10796.881784] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10796.881790] ====>remove Tx_TS_admin_list
[10796.881796] ====>remove Tx_TS_admin_list
[10796.881806] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10796.881817] notify_wx_assoc_event(): Tell user space disconnected
[10796.982355] =====>rtl8192_set_chan()====ch:1
[10797.101117] =====>rtl8192_set_chan()====ch:2
[10797.221082] =====>rtl8192_set_chan()====ch:3
[10797.341031] =====>rtl8192_set_chan()====ch:4
[10797.460901] =====>rtl8192_set_chan()====ch:5
[10797.580871] =====>rtl8192_set_chan()====ch:6
[10797.700731] =====>rtl8192_set_chan()====ch:7
[10797.820643] =====>rtl8192_set_chan()====ch:8
[10797.940593] =====>rtl8192_set_chan()====ch:9
[10798.060482] =====>rtl8192_set_chan()====ch:10
[10798.180400] =====>rtl8192_set_chan()====ch:11
[10798.300339] =====>rtl8192_set_chan()====ch:12
[10798.420210] =====>rtl8192_set_chan()====ch:13
[10798.541109] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10798.541153] ===>rtllib_associate_procedure_wq(), chan:1
[10798.541158] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10798.541162] =====>rtl8192_set_chan()====ch:1
[10798.551579] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10798.551596] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10798.552211] ===>rtllib_associate_procedure_wq(), chan:1
[10798.552217] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10798.552221] =====>rtl8192_set_chan()====ch:1
[10798.564433] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10798.568263] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10798.568268] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10798.568271] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10798.568275] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10798.568279] Associated successfully
[10798.568281] normal associate
[10798.568288] Using G rates:108
[10798.568291] Successfully associated, ht not enabled(0, 0)
[10798.568295] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10798.568301] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10798.569866] RX: IEEE802.1X EAPOL frame!
[10798.577001] RX: IEEE802.1X EAPOL frame!
[10798.577307] alg name:TKIP
[10798.577943] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10798.582759] RX: IEEE802.1X EAPOL frame!
[10798.583356] alg name:TKIP
[10798.583988] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10812.870227] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10812.870238] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10812.870244] ====>remove Tx_TS_admin_list
[10812.870250] ====>remove Tx_TS_admin_list
[10812.870260] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10812.870271] notify_wx_assoc_event(): Tell user space disconnected
[10812.970732] =====>rtl8192_set_chan()====ch:1
[10813.089653] =====>rtl8192_set_chan()====ch:2
[10813.209546] =====>rtl8192_set_chan()====ch:3
[10813.329377] =====>rtl8192_set_chan()====ch:4
[10813.449352] =====>rtl8192_set_chan()====ch:5
[10813.569264] =====>rtl8192_set_chan()====ch:6
[10813.689199] =====>rtl8192_set_chan()====ch:7
[10813.809093] =====>rtl8192_set_chan()====ch:8
[10813.929234] =====>rtl8192_set_chan()====ch:9
[10814.048864] =====>rtl8192_set_chan()====ch:10
[10814.168841] =====>rtl8192_set_chan()====ch:11
[10814.288763] =====>rtl8192_set_chan()====ch:12
[10814.408683] =====>rtl8192_set_chan()====ch:13
[10814.530172] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10814.530240] ===>rtllib_associate_procedure_wq(), chan:1
[10814.530249] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10814.530258] =====>rtl8192_set_chan()====ch:1
[10814.540903] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10814.540938] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10814.541697] ===>rtllib_associate_procedure_wq(), chan:1
[10814.541703] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10814.541708] =====>rtl8192_set_chan()====ch:1
[10814.553826] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10814.557782] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10814.557790] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10814.557796] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10814.557802] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10814.557808] Associated successfully
[10814.557811] normal associate
[10814.557823] Using G rates:108
[10814.557827] Successfully associated, ht not enabled(0, 0)
[10814.557833] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10814.557842] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10814.559177] RX: IEEE802.1X EAPOL frame!
[10814.565862] RX: IEEE802.1X EAPOL frame!
[10814.566053] alg name:TKIP
[10814.566686] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10814.573278] RX: IEEE802.1X EAPOL frame!
[10814.573712] alg name:TKIP
[10814.574329] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10848.376585] ==========>received disassoc/deauth(c0) frame, reason code:a
[10848.376640] notify_wx_assoc_event(): Tell user space disconnected
[10848.376655] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10848.376660] ====>remove Tx_TS_admin_list
[10848.376666] ====>remove Tx_TS_admin_list
[10848.378026] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10848.478401] =====>rtl8192_set_chan()====ch:1
[10848.593891] =====>rtl8192_set_chan()====ch:2
[10848.713879] =====>rtl8192_set_chan()====ch:3
[10848.833842] =====>rtl8192_set_chan()====ch:4
[10848.953664] =====>rtl8192_set_chan()====ch:5
[10849.073634] =====>rtl8192_set_chan()====ch:6
[10849.193515] =====>rtl8192_set_chan()====ch:7
[10849.313357] =====>rtl8192_set_chan()====ch:8
[10849.433378] =====>rtl8192_set_chan()====ch:9
[10849.553279] =====>rtl8192_set_chan()====ch:10
[10849.673287] =====>rtl8192_set_chan()====ch:11
[10849.793093] =====>rtl8192_set_chan()====ch:12
[10849.913001] =====>rtl8192_set_chan()====ch:13
[10850.033921] ===>rtllib_start_scan()
[10850.033976] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10850.033994] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10850.034280] ===>rtllib_associate_procedure_wq(), chan:1
[10850.034286] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10850.034291] =====>rtl8192_set_chan()====ch:1
[10850.046135] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10850.049918] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10850.049923] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10850.049926] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10850.049929] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10850.049932] Associated successfully
[10850.049935] normal associate
[10850.049944] Using G rates:108
[10850.049946] Successfully associated, ht not enabled(0, 0)
[10850.049950] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10850.049956] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10850.051548] RX: IEEE802.1X EAPOL frame!
[10850.059476] RX: IEEE802.1X EAPOL frame!
[10850.059647] alg name:TKIP
[10850.060282] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10850.064656] RX: IEEE802.1X EAPOL frame!
[10850.064804] alg name:TKIP
[10850.065427] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10864.832474] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10864.832481] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10864.832484] ====>remove Tx_TS_admin_list
[10864.832488] ====>remove Tx_TS_admin_list
[10864.832494] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10864.832503] notify_wx_assoc_event(): Tell user space disconnected
[10864.932870] =====>rtl8192_set_chan()====ch:1
[10865.052080] =====>rtl8192_set_chan()====ch:2
[10865.171987] =====>rtl8192_set_chan()====ch:3
[10865.291945] =====>rtl8192_set_chan()====ch:4
[10865.411806] =====>rtl8192_set_chan()====ch:5
[10865.531674] =====>rtl8192_set_chan()====ch:6
[10865.651630] =====>rtl8192_set_chan()====ch:7
[10865.771618] =====>rtl8192_set_chan()====ch:8
[10865.901433] =====>rtl8192_set_chan()====ch:9
[10866.021349] =====>rtl8192_set_chan()====ch:10
[10866.141319] =====>rtl8192_set_chan()====ch:11
[10866.261107] =====>rtl8192_set_chan()====ch:12
[10866.381127] =====>rtl8192_set_chan()====ch:13
[10866.501995] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10866.502032] ===>rtllib_associate_procedure_wq(), chan:1
[10866.502040] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10866.502049] =====>rtl8192_set_chan()====ch:1
[10866.512307] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10866.512330] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10866.513368] ===>rtllib_associate_procedure_wq(), chan:1
[10866.513379] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10866.513388] =====>rtl8192_set_chan()====ch:1
[10866.525153] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10866.529020] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10866.529025] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10866.529028] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10866.529031] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10866.529035] Associated successfully
[10866.529037] normal associate
[10866.529043] Using G rates:108
[10866.529046] Successfully associated, ht not enabled(0, 0)
[10866.529050] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10866.529056] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10866.530600] RX: IEEE802.1X EAPOL frame!
[10866.538911] RX: IEEE802.1X EAPOL frame!
[10866.539213] alg name:TKIP
[10866.539855] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10866.544198] RX: IEEE802.1X EAPOL frame!
[10866.544389] alg name:TKIP
[10866.545005] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10873.152283] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10873.207194] =====>rtl8192_set_chan()====ch:1
[10873.326102] =====>rtl8192_set_chan()====ch:2
[10873.446009] =====>rtl8192_set_chan()====ch:3
[10873.565856] =====>rtl8192_set_chan()====ch:4
[10873.685825] =====>rtl8192_set_chan()====ch:5
[10873.805728] =====>rtl8192_set_chan()====ch:6
[10873.925643] =====>rtl8192_set_chan()====ch:7
[10874.045495] =====>rtl8192_set_chan()====ch:8
[10874.165474] =====>rtl8192_set_chan()====ch:9
[10874.285414] =====>rtl8192_set_chan()====ch:10
[10874.415587] =====>rtl8192_set_chan()====ch:11
[10874.535209] =====>rtl8192_set_chan()====ch:12
[10874.655122] =====>rtl8192_set_chan()====ch:13
[10874.775038] =====>rtl8192_set_chan()====ch:1
[10874.785546] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10874.785557] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10892.822345] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10892.822356] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10892.822362] ====>remove Tx_TS_admin_list
[10892.822369] ====>remove Tx_TS_admin_list
[10892.822378] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10892.822392] notify_wx_assoc_event(): Tell user space disconnected
[10892.922926] =====>rtl8192_set_chan()====ch:1
[10893.041850] =====>rtl8192_set_chan()====ch:2
[10893.161769] =====>rtl8192_set_chan()====ch:3
[10893.281731] =====>rtl8192_set_chan()====ch:4
[10893.401654] =====>rtl8192_set_chan()====ch:5
[10893.521484] =====>rtl8192_set_chan()====ch:6
[10893.641482] =====>rtl8192_set_chan()====ch:7
[10893.761383] =====>rtl8192_set_chan()====ch:8
[10893.881270] =====>rtl8192_set_chan()====ch:9
[10894.001156] =====>rtl8192_set_chan()====ch:10
[10894.121083] =====>rtl8192_set_chan()====ch:11
[10894.240987] =====>rtl8192_set_chan()====ch:12
[10894.360958] =====>rtl8192_set_chan()====ch:13
[10894.481993] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10894.482081] ===>rtllib_associate_procedure_wq(), chan:1
[10894.482091] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10894.482100] =====>rtl8192_set_chan()====ch:1
[10894.492483] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10894.492501] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10894.493365] ===>rtllib_associate_procedure_wq(), chan:1
[10894.493371] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10894.493376] =====>rtl8192_set_chan()====ch:1
[10894.505566] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10894.509422] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10894.509430] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10894.509436] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10894.509442] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10894.509447] Associated successfully
[10894.509451] normal associate
[10894.509461] Using G rates:108
[10894.509466] Successfully associated, ht not enabled(0, 0)
[10894.509472] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10894.509481] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10894.510960] RX: IEEE802.1X EAPOL frame!
[10894.520796] RX: IEEE802.1X EAPOL frame!
[10894.521050] alg name:TKIP
[10894.521700] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10894.526292] RX: IEEE802.1X EAPOL frame!
[10894.526747] alg name:TKIP
[10894.527372] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10910.809514] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10910.809522] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10910.809525] ====>remove Tx_TS_admin_list
[10910.809529] ====>remove Tx_TS_admin_list
[10910.809535] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10910.809600] notify_wx_assoc_event(): Tell user space disconnected
[10910.910062] =====>rtl8192_set_chan()====ch:1
[10911.028846] =====>rtl8192_set_chan()====ch:2
[10911.148782] =====>rtl8192_set_chan()====ch:3
[10911.268673] =====>rtl8192_set_chan()====ch:4
[10911.388588] =====>rtl8192_set_chan()====ch:5
[10911.508537] =====>rtl8192_set_chan()====ch:6
[10911.628427] =====>rtl8192_set_chan()====ch:7
[10911.748324] =====>rtl8192_set_chan()====ch:8
[10911.868264] =====>rtl8192_set_chan()====ch:9
[10911.988156] =====>rtl8192_set_chan()====ch:10
[10912.108054] =====>rtl8192_set_chan()====ch:11
[10912.228042] =====>rtl8192_set_chan()====ch:12
[10912.347911] =====>rtl8192_set_chan()====ch:13
[10912.468491] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10912.468516] ===>rtllib_associate_procedure_wq(), chan:1
[10912.468522] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10912.468527] =====>rtl8192_set_chan()====ch:1
[10912.478846] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10912.478868] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10912.479634] ===>rtllib_associate_procedure_wq(), chan:1
[10912.479640] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10912.479645] =====>rtl8192_set_chan()====ch:1
[10912.491458] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10912.495798] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10912.495806] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10912.495812] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10912.495818] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10912.495823] Associated successfully
[10912.495830] normal associate
[10912.495836] Using G rates:108
[10912.495839] Successfully associated, ht not enabled(0, 0)
[10912.495843] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10912.495849] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10912.497289] RX: IEEE802.1X EAPOL frame!
[10912.503546] RX: IEEE802.1X EAPOL frame!
[10912.503753] alg name:TKIP
[10912.504416] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10912.508932] RX: IEEE802.1X EAPOL frame!
[10912.509156] alg name:TKIP
[10912.509780] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10930.795158] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10930.795169] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10930.795175] ====>remove Tx_TS_admin_list
[10930.795181] ====>remove Tx_TS_admin_list
[10930.795191] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10930.795259] notify_wx_assoc_event(): Tell user space disconnected
[10930.895848] =====>rtl8192_set_chan()====ch:1
[10931.014438] =====>rtl8192_set_chan()====ch:2
[10931.134326] =====>rtl8192_set_chan()====ch:3
[10931.254235] =====>rtl8192_set_chan()====ch:4
[10931.374237] =====>rtl8192_set_chan()====ch:5
[10931.493974] =====>rtl8192_set_chan()====ch:6
[10931.613967] =====>rtl8192_set_chan()====ch:7
[10931.733876] =====>rtl8192_set_chan()====ch:8
[10931.853964] =====>rtl8192_set_chan()====ch:9
[10931.973742] =====>rtl8192_set_chan()====ch:10
[10932.093635] =====>rtl8192_set_chan()====ch:11
[10932.213546] =====>rtl8192_set_chan()====ch:12
[10932.333474] =====>rtl8192_set_chan()====ch:13
[10932.453932] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10932.453953] ===>rtllib_associate_procedure_wq(), chan:1
[10932.453958] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10932.453963] =====>rtl8192_set_chan()====ch:1
[10932.464319] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10932.464346] ===>rtllib_associate_procedure_wq(), chan:1
[10932.464355] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10932.464362] =====>rtl8192_set_chan()====ch:1
[10932.474469] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10932.474855] ===>rtllib_associate_procedure_wq(), chan:1
[10932.474859] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10932.474862] =====>rtl8192_set_chan()====ch:1
[10932.487196] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10932.497400] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10932.497408] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10932.497414] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10932.497419] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10932.497425] Associated successfully
[10932.497429] normal associate
[10932.497439] Using G rates:108
[10932.497443] Successfully associated, ht not enabled(0, 0)
[10932.497450] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10932.497459] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10932.498977] RX: IEEE802.1X EAPOL frame!
[10932.508991] RX: IEEE802.1X EAPOL frame!
[10932.509252] alg name:TKIP
[10932.509886] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10932.514134] RX: IEEE802.1X EAPOL frame!
[10932.514388] alg name:TKIP
[10932.515015] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10944.763300] ==========>received disassoc/deauth(c0) frame, reason code:a
[10944.763352] notify_wx_assoc_event(): Tell user space disconnected
[10944.763367] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10944.763372] ====>remove Tx_TS_admin_list
[10944.763379] ====>remove Tx_TS_admin_list
[10944.763435] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10944.994176] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10944.994364] =====>rtl8192_set_chan()====ch:1
[10945.114218] =====>rtl8192_set_chan()====ch:2
[10945.234128] =====>rtl8192_set_chan()====ch:3
[10945.354023] =====>rtl8192_set_chan()====ch:4
[10945.473904] =====>rtl8192_set_chan()====ch:5
[10945.593918] =====>rtl8192_set_chan()====ch:6
[10945.713776] =====>rtl8192_set_chan()====ch:7
[10945.833698] =====>rtl8192_set_chan()====ch:8
[10945.953619] =====>rtl8192_set_chan()====ch:9
[10946.073579] =====>rtl8192_set_chan()====ch:10
[10946.193435] =====>rtl8192_set_chan()====ch:11
[10946.313404] =====>rtl8192_set_chan()====ch:12
[10946.433270] =====>rtl8192_set_chan()====ch:13
[10946.554925] ===>rtllib_start_scan()
[10946.555008] =====>rtl8192_set_chan()====ch:2
[10946.565153] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10946.565233] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10946.566156] ===>rtllib_associate_procedure_wq(), chan:1
[10946.566161] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10946.566166] =====>rtl8192_set_chan()====ch:1
[10946.577873] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10946.581805] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10946.581816] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10946.581819] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10946.581823] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10946.581826] Associated successfully
[10946.581828] normal associate
[10946.581839] Using G rates:108
[10946.581841] Successfully associated, ht not enabled(0, 0)
[10946.581845] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10946.581851] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10946.583316] RX: IEEE802.1X EAPOL frame!
[10946.592189] RX: IEEE802.1X EAPOL frame!
[10946.592387] alg name:TKIP
[10946.593025] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10946.597437] RX: IEEE802.1X EAPOL frame!
[10946.597602] alg name:TKIP
[10946.598229] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10960.773248] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[10960.773256] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10960.773259] ====>remove Tx_TS_admin_list
[10960.773263] ====>remove Tx_TS_admin_list
[10960.773270] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10960.773281] notify_wx_assoc_event(): Tell user space disconnected
[10960.873653] =====>rtl8192_set_chan()====ch:1
[10960.992744] =====>rtl8192_set_chan()====ch:2
[10961.112679] =====>rtl8192_set_chan()====ch:3
[10961.232587] =====>rtl8192_set_chan()====ch:4
[10961.352472] =====>rtl8192_set_chan()====ch:5
[10961.472416] =====>rtl8192_set_chan()====ch:6
[10961.592404] =====>rtl8192_set_chan()====ch:7
[10961.712243] =====>rtl8192_set_chan()====ch:8
[10961.832117] =====>rtl8192_set_chan()====ch:9
[10961.952063] =====>rtl8192_set_chan()====ch:10
[10962.071922] =====>rtl8192_set_chan()====ch:11
[10962.191929] =====>rtl8192_set_chan()====ch:12
[10962.311806] =====>rtl8192_set_chan()====ch:13
[10962.432808] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10962.432896] ===>rtllib_associate_procedure_wq(), chan:1
[10962.432906] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10962.432915] =====>rtl8192_set_chan()====ch:1
[10962.443177] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10962.443195] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10962.444033] ===>rtllib_associate_procedure_wq(), chan:1
[10962.444038] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10962.444044] =====>rtl8192_set_chan()====ch:1
[10962.457017] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10962.460872] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10962.460880] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10962.460886] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10962.460892] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10962.460897] Associated successfully
[10962.460901] normal associate
[10962.460911] Using G rates:108
[10962.460915] Successfully associated, ht not enabled(0, 0)
[10962.460922] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10962.460931] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10962.462411] RX: IEEE802.1X EAPOL frame!
[10962.470159] RX: IEEE802.1X EAPOL frame!
[10962.470326] alg name:TKIP
[10962.470959] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10962.477232] RX: IEEE802.1X EAPOL frame!
[10962.477419] alg name:TKIP
[10962.478042] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10980.050785] ==========>received disassoc/deauth(c0) frame, reason code:a
[10980.050840] notify_wx_assoc_event(): Tell user space disconnected
[10980.050855] ===========>RemovePeerTS,00:27:0d:71:8f:80
[10980.050860] ====>remove Tx_TS_admin_list
[10980.050866] ====>remove Tx_TS_admin_list
[10980.050923] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10980.152575] =====>rtl8192_set_chan()====ch:1
[10980.268750] =====>rtl8192_set_chan()====ch:2
[10980.388743] =====>rtl8192_set_chan()====ch:3
[10980.508636] =====>rtl8192_set_chan()====ch:4
[10980.628546] =====>rtl8192_set_chan()====ch:5
[10980.748469] =====>rtl8192_set_chan()====ch:6
[10980.868327] =====>rtl8192_set_chan()====ch:7
[10980.988288] =====>rtl8192_set_chan()====ch:8
[10981.108203] =====>rtl8192_set_chan()====ch:9
[10981.228122] =====>rtl8192_set_chan()====ch:10
[10981.348030] =====>rtl8192_set_chan()====ch:11
[10981.467950] =====>rtl8192_set_chan()====ch:12
[10981.587880] =====>rtl8192_set_chan()====ch:13
[10981.709092] ===>rtllib_start_scan()
[10981.709127] =====>rtl8192_set_chan()====ch:2
[10981.719298] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10981.719330] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[10981.720962] ===>rtllib_associate_procedure_wq(), chan:1
[10981.720972] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[10981.720980] =====>rtl8192_set_chan()====ch:1
[10981.732815] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[10981.738150] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[10981.738156] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[10981.738161] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[10981.738165] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[10981.738170] Associated successfully
[10981.738173] normal associate
[10981.738187] Using G rates:108
[10981.738190] Successfully associated, ht not enabled(0, 0)
[10981.738196] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10981.738204] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[10981.739721] RX: IEEE802.1X EAPOL frame!
[10981.747487] RX: IEEE802.1X EAPOL frame!
[10981.747807] alg name:TKIP
[10981.748452] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[10981.752751] RX: IEEE802.1X EAPOL frame!
[10981.752899] alg name:TKIP
[10981.753537] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[10995.061345] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10995.118481] =====>rtl8192_set_chan()====ch:1
[10995.237998] =====>rtl8192_set_chan()====ch:2
[10995.357942] =====>rtl8192_set_chan()====ch:3
[10995.477888] =====>rtl8192_set_chan()====ch:4
[10995.597729] =====>rtl8192_set_chan()====ch:5
[10995.717751] =====>rtl8192_set_chan()====ch:6
[10995.837518] =====>rtl8192_set_chan()====ch:7
[10995.957495] =====>rtl8192_set_chan()====ch:8
[10996.077462] =====>rtl8192_set_chan()====ch:9
[10996.197343] =====>rtl8192_set_chan()====ch:10
[10996.317318] =====>rtl8192_set_chan()====ch:11
[10996.437237] =====>rtl8192_set_chan()====ch:12
[10996.556964] =====>rtl8192_set_chan()====ch:13
[10996.677014] =====>rtl8192_set_chan()====ch:1
[10996.687269] ===>rtl8192se_link_change():ieee->iw_mode is 2
[10996.687284] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11010.776804] too short to sleep::105aa2, 105a9d, 5
[11016.742788] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11016.742796] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11016.742799] ====>remove Tx_TS_admin_list
[11016.742803] ====>remove Tx_TS_admin_list
[11016.742809] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11016.742821] notify_wx_assoc_event(): Tell user space disconnected
[11016.843197] =====>rtl8192_set_chan()====ch:1
[11016.962301] =====>rtl8192_set_chan()====ch:2
[11017.082258] =====>rtl8192_set_chan()====ch:3
[11017.202123] =====>rtl8192_set_chan()====ch:4
[11017.322048] =====>rtl8192_set_chan()====ch:5
[11017.441961] =====>rtl8192_set_chan()====ch:6
[11017.561854] =====>rtl8192_set_chan()====ch:7
[11017.681827] =====>rtl8192_set_chan()====ch:8
[11017.801614] =====>rtl8192_set_chan()====ch:9
[11017.921614] =====>rtl8192_set_chan()====ch:10
[11018.041566] =====>rtl8192_set_chan()====ch:11
[11018.161357] =====>rtl8192_set_chan()====ch:12
[11018.281334] =====>rtl8192_set_chan()====ch:13
[11018.402732] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11018.402757] ===>rtllib_associate_procedure_wq(), chan:1
[11018.402762] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11018.402767] =====>rtl8192_set_chan()====ch:1
[11018.413311] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11018.413333] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11018.414071] ===>rtllib_associate_procedure_wq(), chan:1
[11018.414076] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11018.414081] =====>rtl8192_set_chan()====ch:1
[11018.426231] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11018.430096] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11018.430103] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11018.430109] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11018.430115] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11018.430120] Associated successfully
[11018.430124] normal associate
[11018.430134] Using G rates:108
[11018.430138] Successfully associated, ht not enabled(0, 0)
[11018.430144] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11018.430154] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11018.431607] RX: IEEE802.1X EAPOL frame!
[11018.438430] RX: IEEE802.1X EAPOL frame!
[11018.438627] alg name:TKIP
[11018.439261] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11018.443836] RX: IEEE802.1X EAPOL frame!
[11018.444257] alg name:TKIP
[11018.444880] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11037.704741] ==========>received disassoc/deauth(c0) frame, reason code:a
[11037.704792] notify_wx_assoc_event(): Tell user space disconnected
[11037.704807] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11037.704813] ====>remove Tx_TS_admin_list
[11037.704819] ====>remove Tx_TS_admin_list
[11037.704872] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11037.838734] =====>rtl8192_set_chan()====ch:1
[11037.957169] =====>rtl8192_set_chan()====ch:2
[11038.077102] =====>rtl8192_set_chan()====ch:3
[11038.196922] =====>rtl8192_set_chan()====ch:4
[11038.316855] =====>rtl8192_set_chan()====ch:5
[11038.436705] =====>rtl8192_set_chan()====ch:6
[11038.556746] =====>rtl8192_set_chan()====ch:7
[11038.676601] =====>rtl8192_set_chan()====ch:8
[11038.796508] =====>rtl8192_set_chan()====ch:9
[11038.916430] =====>rtl8192_set_chan()====ch:10
[11039.036351] =====>rtl8192_set_chan()====ch:11
[11039.156310] =====>rtl8192_set_chan()====ch:12
[11039.276141] =====>rtl8192_set_chan()====ch:13
[11039.396780] ===>rtllib_start_scan()
[11039.396827] =====>rtl8192_set_chan()====ch:2
[11039.407030] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11039.407096] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11039.408041] ===>rtllib_associate_procedure_wq(), chan:1
[11039.408052] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11039.408061] =====>rtl8192_set_chan()====ch:1
[11039.420529] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11039.424430] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11039.424436] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11039.424441] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11039.424446] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11039.424451] Associated successfully
[11039.424454] normal associate
[11039.424468] Using G rates:108
[11039.424472] Successfully associated, ht not enabled(0, 0)
[11039.424477] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11039.424485] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11039.425922] RX: IEEE802.1X EAPOL frame!
[11039.437805] RX: IEEE802.1X EAPOL frame!
[11039.438134] alg name:TKIP
[11039.438770] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11039.443461] RX: IEEE802.1X EAPOL frame!
[11039.443625] alg name:TKIP
[11039.444248] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11073.668211] ==========>received disassoc/deauth(c0) frame, reason code:a
[11073.668264] notify_wx_assoc_event(): Tell user space disconnected
[11073.668279] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11073.668284] ====>remove Tx_TS_admin_list
[11073.668290] ====>remove Tx_TS_admin_list
[11073.668346] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11073.882168] =====>rtl8192_set_chan()====ch:1
[11074.001104] =====>rtl8192_set_chan()====ch:2
[11074.121035] =====>rtl8192_set_chan()====ch:3
[11074.240908] =====>rtl8192_set_chan()====ch:4
[11074.360785] =====>rtl8192_set_chan()====ch:5
[11074.480732] =====>rtl8192_set_chan()====ch:6
[11074.600646] =====>rtl8192_set_chan()====ch:7
[11074.720536] =====>rtl8192_set_chan()====ch:8
[11074.840461] =====>rtl8192_set_chan()====ch:9
[11074.960449] =====>rtl8192_set_chan()====ch:10
[11075.080315] =====>rtl8192_set_chan()====ch:11
[11075.200228] =====>rtl8192_set_chan()====ch:12
[11075.320140] =====>rtl8192_set_chan()====ch:13
[11075.441156] ===>rtllib_start_scan()
[11075.441178] =====>rtl8192_set_chan()====ch:2
[11075.451284] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11075.451359] ===>rtllib_associate_procedure_wq(), chan:1
[11075.451368] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11075.451376] =====>rtl8192_set_chan()====ch:1
[11075.461531] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11075.462055] ===>rtllib_associate_procedure_wq(), chan:1
[11075.462061] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11075.462066] =====>rtl8192_set_chan()====ch:1
[11075.473894] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11075.477793] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11075.477804] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11075.477814] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11075.477822] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11075.477830] Associated successfully
[11075.477835] normal associate
[11075.477855] Using G rates:108
[11075.477861] Successfully associated, ht not enabled(0, 0)
[11075.477870] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11075.477883] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11075.479349] RX: IEEE802.1X EAPOL frame!
[11075.487789] RX: IEEE802.1X EAPOL frame!
[11075.487971] alg name:TKIP
[11075.488604] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11075.492993] RX: IEEE802.1X EAPOL frame!
[11075.493232] alg name:TKIP
[11075.493864] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11114.973878] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11115.031430] =====>rtl8192_set_chan()====ch:1
[11115.151309] =====>rtl8192_set_chan()====ch:2
[11115.271200] =====>rtl8192_set_chan()====ch:3
[11115.391105] =====>rtl8192_set_chan()====ch:4
[11115.511095] =====>rtl8192_set_chan()====ch:5
[11115.631003] =====>rtl8192_set_chan()====ch:6
[11115.750898] =====>rtl8192_set_chan()====ch:7
[11115.870792] =====>rtl8192_set_chan()====ch:8
[11115.990737] =====>rtl8192_set_chan()====ch:9
[11116.110613] =====>rtl8192_set_chan()====ch:10
[11116.230506] =====>rtl8192_set_chan()====ch:11
[11116.350433] =====>rtl8192_set_chan()====ch:12
[11116.470436] =====>rtl8192_set_chan()====ch:13
[11116.590307] =====>rtl8192_set_chan()====ch:1
[11116.600389] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11116.600399] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11138.118159] ==========>received disassoc/deauth(c0) frame, reason code:a
[11138.118215] notify_wx_assoc_event(): Tell user space disconnected
[11138.118230] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11138.118235] ====>remove Tx_TS_admin_list
[11138.118241] ====>remove Tx_TS_admin_list
[11138.118288] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11138.295999] =====>rtl8192_set_chan()====ch:1
[11138.414573] =====>rtl8192_set_chan()====ch:2
[11138.534501] =====>rtl8192_set_chan()====ch:3
[11138.654346] =====>rtl8192_set_chan()====ch:4
[11138.774322] =====>rtl8192_set_chan()====ch:5
[11138.894237] =====>rtl8192_set_chan()====ch:6
[11139.014088] =====>rtl8192_set_chan()====ch:7
[11139.134050] =====>rtl8192_set_chan()====ch:8
[11139.253921] =====>rtl8192_set_chan()====ch:9
[11139.373831] =====>rtl8192_set_chan()====ch:10
[11139.493664] =====>rtl8192_set_chan()====ch:11
[11139.613677] =====>rtl8192_set_chan()====ch:12
[11139.733591] =====>rtl8192_set_chan()====ch:13
[11139.854577] ===>rtllib_start_scan()
[11139.854660] =====>rtl8192_set_chan()====ch:2
[11139.864809] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11139.864962] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11139.865712] ===>rtllib_associate_procedure_wq(), chan:1
[11139.865719] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11139.865723] =====>rtl8192_set_chan()====ch:1
[11139.877555] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11139.881415] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11139.881422] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11139.881428] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11139.881436] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11139.881439] Associated successfully
[11139.881441] normal associate
[11139.881451] Using G rates:108
[11139.881453] Successfully associated, ht not enabled(0, 0)
[11139.881457] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11139.881463] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11139.882947] RX: IEEE802.1X EAPOL frame!
[11139.895251] RX: IEEE802.1X EAPOL frame!
[11139.895417] alg name:TKIP
[11139.896050] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11139.900439] RX: IEEE802.1X EAPOL frame!
[11139.900592] alg name:TKIP
[11139.901217] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11158.565091] ==========>received disassoc/deauth(c0) frame, reason code:a
[11158.565145] notify_wx_assoc_event(): Tell user space disconnected
[11158.565160] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11158.565165] ====>remove Tx_TS_admin_list
[11158.565171] ====>remove Tx_TS_admin_list
[11158.565228] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11158.795968] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11158.796037] =====>rtl8192_set_chan()====ch:1
[11158.909727] =====>rtl8192_set_chan()====ch:2
[11159.029621] =====>rtl8192_set_chan()====ch:3
[11159.149600] =====>rtl8192_set_chan()====ch:4
[11159.269485] =====>rtl8192_set_chan()====ch:5
[11159.389373] =====>rtl8192_set_chan()====ch:6
[11159.509308] =====>rtl8192_set_chan()====ch:7
[11159.629257] =====>rtl8192_set_chan()====ch:8
[11159.749204] =====>rtl8192_set_chan()====ch:9
[11159.869006] =====>rtl8192_set_chan()====ch:10
[11159.989003] =====>rtl8192_set_chan()====ch:11
[11160.108880] =====>rtl8192_set_chan()====ch:12
[11160.228776] =====>rtl8192_set_chan()====ch:13
[11160.349240] ===>rtllib_start_scan()
[11160.349262] =====>rtl8192_set_chan()====ch:2
[11160.359423] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11160.359489] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11160.359931] ===>rtllib_associate_procedure_wq(), chan:1
[11160.359935] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11160.359939] =====>rtl8192_set_chan()====ch:1
[11160.371833] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11160.376528] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11160.376536] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11160.376543] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11160.376548] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11160.376554] Associated successfully
[11160.376557] normal associate
[11160.376571] Using G rates:108
[11160.376576] Successfully associated, ht not enabled(0, 0)
[11160.376582] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11160.376591] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11160.377999] RX: IEEE802.1X EAPOL frame!
[11160.385453] RX: IEEE802.1X EAPOL frame!
[11160.385621] alg name:TKIP
[11160.386292] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11160.391097] RX: IEEE802.1X EAPOL frame!
[11160.391193] alg name:TKIP
[11160.391808] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11173.918954] too short to sleep::109a68, 109a63, 5
[11206.318059] ==========>received disassoc/deauth(c0) frame, reason code:a
[11206.318092] notify_wx_assoc_event(): Tell user space disconnected
[11206.318101] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11206.318104] ====>remove Tx_TS_admin_list
[11206.318108] ====>remove Tx_TS_admin_list
[11206.318147] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11206.419275] =====>rtl8192_set_chan()====ch:1
[11206.535371] =====>rtl8192_set_chan()====ch:2
[11206.655279] =====>rtl8192_set_chan()====ch:3
[11206.775189] =====>rtl8192_set_chan()====ch:4
[11206.895071] =====>rtl8192_set_chan()====ch:5
[11207.014991] =====>rtl8192_set_chan()====ch:6
[11207.134940] =====>rtl8192_set_chan()====ch:7
[11207.254760] =====>rtl8192_set_chan()====ch:8
[11207.374766] =====>rtl8192_set_chan()====ch:9
[11207.494615] =====>rtl8192_set_chan()====ch:10
[11207.614495] =====>rtl8192_set_chan()====ch:11
[11207.734437] =====>rtl8192_set_chan()====ch:12
[11207.854360] =====>rtl8192_set_chan()====ch:13
[11207.975218] ===>rtllib_start_scan()
[11207.975270] =====>rtl8192_set_chan()====ch:2
[11207.985460] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11207.985533] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11207.986109] ===>rtllib_associate_procedure_wq(), chan:1
[11207.986114] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11207.986118] =====>rtl8192_set_chan()====ch:1
[11207.998154] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11208.002118] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11208.002122] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11208.002125] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11208.002128] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11208.002131] Associated successfully
[11208.002134] normal associate
[11208.002142] Using G rates:108
[11208.002145] Successfully associated, ht not enabled(0, 0)
[11208.002149] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11208.002155] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11208.003596] RX: IEEE802.1X EAPOL frame!
[11208.011971] RX: IEEE802.1X EAPOL frame!
[11208.012192] alg name:TKIP
[11208.012826] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11208.019057] RX: IEEE802.1X EAPOL frame!
[11208.019297] alg name:TKIP
[11208.019931] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11225.560571] ==========>received disassoc/deauth(c0) frame, reason code:a
[11225.560650] notify_wx_assoc_event(): Tell user space disconnected
[11225.560671] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11225.560679] ====>remove Tx_TS_admin_list
[11225.560687] ====>remove Tx_TS_admin_list
[11225.560756] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11225.694267] =====>rtl8192_set_chan()====ch:1
[11225.811323] =====>rtl8192_set_chan()====ch:2
[11225.931292] =====>rtl8192_set_chan()====ch:3
[11226.051222] =====>rtl8192_set_chan()====ch:4
[11226.171127] =====>rtl8192_set_chan()====ch:5
[11226.291063] =====>rtl8192_set_chan()====ch:6
[11226.400904] =====>rtl8192_set_chan()====ch:7
[11226.520947] =====>rtl8192_set_chan()====ch:8
[11226.640781] =====>rtl8192_set_chan()====ch:9
[11226.760698] =====>rtl8192_set_chan()====ch:10
[11226.880665] =====>rtl8192_set_chan()====ch:11
[11227.000426] =====>rtl8192_set_chan()====ch:12
[11227.120451] =====>rtl8192_set_chan()====ch:13
[11227.241859] ===>rtllib_start_scan()
[11227.241943] =====>rtl8192_set_chan()====ch:2
[11227.252052] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11227.252220] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11227.252407] ===>rtllib_associate_procedure_wq(), chan:1
[11227.252413] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11227.252417] =====>rtl8192_set_chan()====ch:1
[11227.264236] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11227.268118] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11227.268123] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11227.268127] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11227.268130] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11227.268133] Associated successfully
[11227.268136] normal associate
[11227.268147] Using G rates:108
[11227.268149] Successfully associated, ht not enabled(0, 0)
[11227.268153] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11227.268160] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11227.269701] RX: IEEE802.1X EAPOL frame!
[11227.276918] RX: IEEE802.1X EAPOL frame!
[11227.277114] alg name:TKIP
[11227.277739] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11227.283034] RX: IEEE802.1X EAPOL frame!
[11227.283171] alg name:TKIP
[11227.283799] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11235.887170] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11235.944232] =====>rtl8192_set_chan()====ch:1
[11236.063960] =====>rtl8192_set_chan()====ch:2
[11236.183894] =====>rtl8192_set_chan()====ch:3
[11236.303815] =====>rtl8192_set_chan()====ch:4
[11236.423718] =====>rtl8192_set_chan()====ch:5
[11236.543635] =====>rtl8192_set_chan()====ch:6
[11236.663557] =====>rtl8192_set_chan()====ch:7
[11236.783442] =====>rtl8192_set_chan()====ch:8
[11236.903320] =====>rtl8192_set_chan()====ch:9
[11237.023315] =====>rtl8192_set_chan()====ch:10
[11237.143150] =====>rtl8192_set_chan()====ch:11
[11237.273085] =====>rtl8192_set_chan()====ch:12
[11237.393048] =====>rtl8192_set_chan()====ch:13
[11237.512942] =====>rtl8192_set_chan()====ch:1
[11237.523190] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11237.523201] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11250.574006] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11250.574017] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11250.574023] ====>remove Tx_TS_admin_list
[11250.574029] ====>remove Tx_TS_admin_list
[11250.574038] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11250.574050] notify_wx_assoc_event(): Tell user space disconnected
[11250.674513] =====>rtl8192_set_chan()====ch:1
[11250.793358] =====>rtl8192_set_chan()====ch:2
[11250.913273] =====>rtl8192_set_chan()====ch:3
[11251.033186] =====>rtl8192_set_chan()====ch:4
[11251.153074] =====>rtl8192_set_chan()====ch:5
[11251.272996] =====>rtl8192_set_chan()====ch:6
[11251.392903] =====>rtl8192_set_chan()====ch:7
[11251.502733] =====>rtl8192_set_chan()====ch:8
[11251.622676] =====>rtl8192_set_chan()====ch:9
[11251.742629] =====>rtl8192_set_chan()====ch:10
[11251.862589] =====>rtl8192_set_chan()====ch:11
[11251.982516] =====>rtl8192_set_chan()====ch:12
[11252.102381] =====>rtl8192_set_chan()====ch:13
[11252.223209] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11252.223277] ===>rtllib_associate_procedure_wq(), chan:1
[11252.223286] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11252.223295] =====>rtl8192_set_chan()====ch:1
[11252.233565] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11252.233593] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11252.234383] ===>rtllib_associate_procedure_wq(), chan:1
[11252.234392] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11252.234400] =====>rtl8192_set_chan()====ch:1
[11252.246217] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11252.250136] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11252.250144] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11252.250150] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11252.250156] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11252.250161] Associated successfully
[11252.250165] normal associate
[11252.250176] Using G rates:108
[11252.250181] Successfully associated, ht not enabled(0, 0)
[11252.250188] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11252.250197] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11252.251656] RX: IEEE802.1X EAPOL frame!
[11252.259907] RX: IEEE802.1X EAPOL frame!
[11252.260057] alg name:TKIP
[11252.260680] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11252.265125] RX: IEEE802.1X EAPOL frame!
[11252.265328] alg name:TKIP
[11252.265965] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11264.968132] ==========>received disassoc/deauth(c0) frame, reason code:a
[11264.968159] notify_wx_assoc_event(): Tell user space disconnected
[11264.968181] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11264.968189] ====>remove Tx_TS_admin_list
[11264.968197] ====>remove Tx_TS_admin_list
[11264.968265] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11265.144860] =====>rtl8192_set_chan()====ch:1
[11265.262874] =====>rtl8192_set_chan()====ch:2
[11265.382859] =====>rtl8192_set_chan()====ch:3
[11265.502701] =====>rtl8192_set_chan()====ch:4
[11265.622601] =====>rtl8192_set_chan()====ch:5
[11265.742493] =====>rtl8192_set_chan()====ch:6
[11265.862429] =====>rtl8192_set_chan()====ch:7
[11265.982384] =====>rtl8192_set_chan()====ch:8
[11266.102233] =====>rtl8192_set_chan()====ch:9
[11266.222108] =====>rtl8192_set_chan()====ch:10
[11266.342080] =====>rtl8192_set_chan()====ch:11
[11266.462154] =====>rtl8192_set_chan()====ch:12
[11266.581912] =====>rtl8192_set_chan()====ch:13
[11266.702917] ===>rtllib_start_scan()
[11266.703003] =====>rtl8192_set_chan()====ch:2
[11266.713162] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11266.713320] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11266.714166] ===>rtllib_associate_procedure_wq(), chan:1
[11266.714173] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11266.714178] =====>rtl8192_set_chan()====ch:1
[11266.726019] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11266.729895] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11266.729902] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11266.729910] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11266.729913] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11266.729917] Associated successfully
[11266.729919] normal associate
[11266.729929] Using G rates:108
[11266.729932] Successfully associated, ht not enabled(0, 0)
[11266.729936] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11266.729942] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11266.731384] RX: IEEE802.1X EAPOL frame!
[11266.739017] RX: IEEE802.1X EAPOL frame!
[11266.739178] alg name:TKIP
[11266.739817] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11266.744248] RX: IEEE802.1X EAPOL frame!
[11266.744441] alg name:TKIP
[11266.745070] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11281.923359] ==========>received disassoc/deauth(c0) frame, reason code:a
[11281.923439] notify_wx_assoc_event(): Tell user space disconnected
[11281.923458] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11281.923466] ====>remove Tx_TS_admin_list
[11281.923474] ====>remove Tx_TS_admin_list
[11281.923554] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11282.027028] =====>rtl8192_set_chan()====ch:1
[11282.140688] =====>rtl8192_set_chan()====ch:2
[11282.260577] =====>rtl8192_set_chan()====ch:3
[11282.380537] =====>rtl8192_set_chan()====ch:4
[11282.500489] =====>rtl8192_set_chan()====ch:5
[11282.620332] =====>rtl8192_set_chan()====ch:6
[11282.740235] =====>rtl8192_set_chan()====ch:7
[11282.860153] =====>rtl8192_set_chan()====ch:8
[11282.980142] =====>rtl8192_set_chan()====ch:9
[11283.099999] =====>rtl8192_set_chan()====ch:10
[11283.219891] =====>rtl8192_set_chan()====ch:11
[11283.339766] =====>rtl8192_set_chan()====ch:12
[11283.459685] =====>rtl8192_set_chan()====ch:13
[11283.581161] ===>rtllib_start_scan()
[11283.581190] =====>rtl8192_set_chan()====ch:2
[11283.591384] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11283.591437] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11283.591752] ===>rtllib_associate_procedure_wq(), chan:1
[11283.591758] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11283.591763] =====>rtl8192_set_chan()====ch:1
[11283.603999] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11283.607890] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11283.607897] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11283.607903] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11283.607909] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11283.607914] Associated successfully
[11283.607918] normal associate
[11283.607932] Using G rates:108
[11283.607936] Successfully associated, ht not enabled(0, 0)
[11283.607943] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11283.607952] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11283.609282] RX: IEEE802.1X EAPOL frame!
[11283.616102] RX: IEEE802.1X EAPOL frame!
[11283.616332] alg name:TKIP
[11283.616972] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11283.624291] RX: IEEE802.1X EAPOL frame!
[11283.624563] alg name:TKIP
[11283.625191] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11305.680365] ==========>received disassoc/deauth(c0) frame, reason code:a
[11305.680397] notify_wx_assoc_event(): Tell user space disconnected
[11305.680410] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11305.680414] ====>remove Tx_TS_admin_list
[11305.680419] ====>remove Tx_TS_admin_list
[11305.680457] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11305.855094] =====>rtl8192_set_chan()====ch:1
[11305.973454] =====>rtl8192_set_chan()====ch:2
[11306.093386] =====>rtl8192_set_chan()====ch:3
[11306.213215] =====>rtl8192_set_chan()====ch:4
[11306.333144] =====>rtl8192_set_chan()====ch:5
[11306.453053] =====>rtl8192_set_chan()====ch:6
[11306.573073] =====>rtl8192_set_chan()====ch:7
[11306.702891] =====>rtl8192_set_chan()====ch:8
[11306.822847] =====>rtl8192_set_chan()====ch:9
[11306.942760] =====>rtl8192_set_chan()====ch:10
[11307.062629] =====>rtl8192_set_chan()====ch:11
[11307.182601] =====>rtl8192_set_chan()====ch:12
[11307.312451] =====>rtl8192_set_chan()====ch:13
[11307.435469] ===>rtllib_start_scan()
[11307.435522] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11307.435536] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11307.435695] ===>rtllib_associate_procedure_wq(), chan:1
[11307.435701] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11307.435706] =====>rtl8192_set_chan()====ch:1
[11307.447485] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11307.451328] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11307.451335] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11307.451341] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11307.451346] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11307.451351] Associated successfully
[11307.451355] normal associate
[11307.451368] Using G rates:108
[11307.451372] Successfully associated, ht not enabled(0, 0)
[11307.451378] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11307.451387] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11307.452908] RX: IEEE802.1X EAPOL frame!
[11307.459856] RX: IEEE802.1X EAPOL frame!
[11307.460026] alg name:TKIP
[11307.460657] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11307.465758] RX: IEEE802.1X EAPOL frame!
[11307.465925] alg name:TKIP
[11307.466548] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11328.630980] ==========>received disassoc/deauth(c0) frame, reason code:a
[11328.631044] notify_wx_assoc_event(): Tell user space disconnected
[11328.631059] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11328.631064] ====>remove Tx_TS_admin_list
[11328.631070] ====>remove Tx_TS_admin_list
[11328.631127] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11328.788291] =====>rtl8192_set_chan()====ch:1
[11328.906918] =====>rtl8192_set_chan()====ch:2
[11329.026742] =====>rtl8192_set_chan()====ch:3
[11329.146675] =====>rtl8192_set_chan()====ch:4
[11329.266650] =====>rtl8192_set_chan()====ch:5
[11329.386471] =====>rtl8192_set_chan()====ch:6
[11329.506367] =====>rtl8192_set_chan()====ch:7
[11329.626382] =====>rtl8192_set_chan()====ch:8
[11329.746303] =====>rtl8192_set_chan()====ch:9
[11329.866220] =====>rtl8192_set_chan()====ch:10
[11329.986096] =====>rtl8192_set_chan()====ch:11
[11330.106065] =====>rtl8192_set_chan()====ch:12
[11330.225982] =====>rtl8192_set_chan()====ch:13
[11330.347015] ===>rtllib_start_scan()
[11330.347076] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11330.347098] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11330.347184] ===>rtllib_associate_procedure_wq(), chan:1
[11330.347190] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11330.347196] =====>rtl8192_set_chan()====ch:1
[11330.359284] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11330.363149] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11330.363156] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11330.363160] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11330.363165] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11330.363170] Associated successfully
[11330.363173] normal associate
[11330.363187] Using G rates:108
[11330.363190] Successfully associated, ht not enabled(0, 0)
[11330.363196] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11330.363205] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11330.364764] RX: IEEE802.1X EAPOL frame!
[11330.372815] RX: IEEE802.1X EAPOL frame!
[11330.372938] alg name:TKIP
[11330.373561] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11330.378045] RX: IEEE802.1X EAPOL frame!
[11330.378225] alg name:TKIP
[11330.378849] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11347.801742] ==========>received disassoc/deauth(c0) frame, reason code:a
[11347.801795] notify_wx_assoc_event(): Tell user space disconnected
[11347.801810] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11347.801815] ====>remove Tx_TS_admin_list
[11347.801821] ====>remove Tx_TS_admin_list
[11347.801876] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11347.903770] =====>rtl8192_set_chan()====ch:1
[11348.023051] =====>rtl8192_set_chan()====ch:2
[11348.143032] =====>rtl8192_set_chan()====ch:3
[11348.262843] =====>rtl8192_set_chan()====ch:4
[11348.382756] =====>rtl8192_set_chan()====ch:5
[11348.502757] =====>rtl8192_set_chan()====ch:6
[11348.622627] =====>rtl8192_set_chan()====ch:7
[11348.742546] =====>rtl8192_set_chan()====ch:8
[11348.862492] =====>rtl8192_set_chan()====ch:9
[11348.982446] =====>rtl8192_set_chan()====ch:10
[11349.102345] =====>rtl8192_set_chan()====ch:11
[11349.222151] =====>rtl8192_set_chan()====ch:12
[11349.342154] =====>rtl8192_set_chan()====ch:13
[11349.464359] ===>rtllib_start_scan()
[11349.464495] =====>rtl8192_set_chan()====ch:2
[11349.474669] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11349.474763] ===>rtllib_associate_procedure_wq(), chan:1
[11349.474771] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11349.474779] =====>rtl8192_set_chan()====ch:1
[11349.485014] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11349.486017] ===>rtllib_associate_procedure_wq(), chan:1
[11349.486023] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11349.486029] =====>rtl8192_set_chan()====ch:1
[11349.498258] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11349.502243] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11349.502251] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11349.502257] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11349.502262] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11349.502268] Associated successfully
[11349.502271] normal associate
[11349.502286] Using G rates:108
[11349.502291] Successfully associated, ht not enabled(0, 0)
[11349.502297] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11349.502307] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11349.503713] RX: IEEE802.1X EAPOL frame!
[11349.510960] RX: IEEE802.1X EAPOL frame!
[11349.511203] alg name:TKIP
[11349.511839] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11349.516454] RX: IEEE802.1X EAPOL frame!
[11349.516720] alg name:TKIP
[11349.517360] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11356.801053] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11356.856882] =====>rtl8192_set_chan()====ch:1
[11356.976602] =====>rtl8192_set_chan()====ch:2
[11357.096760] =====>rtl8192_set_chan()====ch:3
[11357.216484] =====>rtl8192_set_chan()====ch:4
[11357.336339] =====>rtl8192_set_chan()====ch:5
[11357.456256] =====>rtl8192_set_chan()====ch:6
[11357.576293] =====>rtl8192_set_chan()====ch:7
[11357.696096] =====>rtl8192_set_chan()====ch:8
[11357.815968] =====>rtl8192_set_chan()====ch:9
[11357.935953] =====>rtl8192_set_chan()====ch:10
[11358.055852] =====>rtl8192_set_chan()====ch:11
[11358.175714] =====>rtl8192_set_chan()====ch:12
[11358.297286] =====>rtl8192_set_chan()====ch:13
[11358.415522] =====>rtl8192_set_chan()====ch:1
[11358.425785] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11358.425796] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11369.864738] ==========>received disassoc/deauth(c0) frame, reason code:a
[11369.864770] notify_wx_assoc_event(): Tell user space disconnected
[11369.864780] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11369.864783] ====>remove Tx_TS_admin_list
[11369.864786] ====>remove Tx_TS_admin_list
[11369.864846] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11370.028864] =====>rtl8192_set_chan()====ch:1
[11370.147059] =====>rtl8192_set_chan()====ch:2
[11370.267001] =====>rtl8192_set_chan()====ch:3
[11370.386925] =====>rtl8192_set_chan()====ch:4
[11370.506809] =====>rtl8192_set_chan()====ch:5
[11370.626684] =====>rtl8192_set_chan()====ch:6
[11370.746669] =====>rtl8192_set_chan()====ch:7
[11370.866579] =====>rtl8192_set_chan()====ch:8
[11370.986512] =====>rtl8192_set_chan()====ch:9
[11371.106419] =====>rtl8192_set_chan()====ch:10
[11371.226296] =====>rtl8192_set_chan()====ch:11
[11371.346205] =====>rtl8192_set_chan()====ch:12
[11371.466426] =====>rtl8192_set_chan()====ch:13
[11371.587972] ===>rtllib_start_scan()
[11371.588011] =====>rtl8192_set_chan()====ch:2
[11371.598092] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11371.598131] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11371.598769] ===>rtllib_associate_procedure_wq(), chan:1
[11371.598773] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11371.598777] =====>rtl8192_set_chan()====ch:1
[11371.610609] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11371.614405] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11371.614409] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11371.614412] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11371.614416] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11371.614419] Associated successfully
[11371.614421] normal associate
[11371.614432] Using G rates:108
[11371.614434] Successfully associated, ht not enabled(0, 0)
[11371.614438] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11371.614444] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11371.615984] RX: IEEE802.1X EAPOL frame!
[11371.622399] RX: IEEE802.1X EAPOL frame!
[11371.622571] alg name:TKIP
[11371.623211] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11371.629325] RX: IEEE802.1X EAPOL frame!
[11371.629484] alg name:TKIP
[11371.630118] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11387.837788] ==========>received disassoc/deauth(c0) frame, reason code:a
[11387.837844] notify_wx_assoc_event(): Tell user space disconnected
[11387.837860] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11387.837865] ====>remove Tx_TS_admin_list
[11387.837871] ====>remove Tx_TS_admin_list
[11387.837931] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11387.939720] =====>rtl8192_set_chan()====ch:1
[11388.054133] =====>rtl8192_set_chan()====ch:2
[11388.174039] =====>rtl8192_set_chan()====ch:3
[11388.293967] =====>rtl8192_set_chan()====ch:4
[11388.413932] =====>rtl8192_set_chan()====ch:5
[11388.533828] =====>rtl8192_set_chan()====ch:6
[11388.653729] =====>rtl8192_set_chan()====ch:7
[11388.773612] =====>rtl8192_set_chan()====ch:8
[11388.893552] =====>rtl8192_set_chan()====ch:9
[11389.013518] =====>rtl8192_set_chan()====ch:10
[11389.133372] =====>rtl8192_set_chan()====ch:11
[11389.253314] =====>rtl8192_set_chan()====ch:12
[11389.373248] =====>rtl8192_set_chan()====ch:13
[11389.494331] ===>rtllib_start_scan()
[11389.494575] =====>rtl8192_set_chan()====ch:2
[11389.504684] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11389.504722] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11389.505682] ===>rtllib_associate_procedure_wq(), chan:1
[11389.505688] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11389.505694] =====>rtl8192_set_chan()====ch:1
[11389.517493] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11389.521334] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11389.521340] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11389.521344] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11389.521347] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11389.521350] Associated successfully
[11389.521353] normal associate
[11389.521364] Using G rates:108
[11389.521366] Successfully associated, ht not enabled(0, 0)
[11389.521370] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11389.521376] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11389.522923] RX: IEEE802.1X EAPOL frame!
[11389.530758] RX: IEEE802.1X EAPOL frame!
[11389.530910] alg name:TKIP
[11389.531537] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11389.535896] RX: IEEE802.1X EAPOL frame!
[11389.536057] alg name:TKIP
[11389.536688] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11406.461337] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11406.461349] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11406.461355] ====>remove Tx_TS_admin_list
[11406.461361] ====>remove Tx_TS_admin_list
[11406.461370] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11406.461382] notify_wx_assoc_event(): Tell user space disconnected
[11406.561816] =====>rtl8192_set_chan()====ch:1
[11406.680715] =====>rtl8192_set_chan()====ch:2
[11406.800627] =====>rtl8192_set_chan()====ch:3
[11406.920554] =====>rtl8192_set_chan()====ch:4
[11407.040398] =====>rtl8192_set_chan()====ch:5
[11407.160329] =====>rtl8192_set_chan()====ch:6
[11407.280297] =====>rtl8192_set_chan()====ch:7
[11407.410120] =====>rtl8192_set_chan()====ch:8
[11407.530021] =====>rtl8192_set_chan()====ch:9
[11407.650001] =====>rtl8192_set_chan()====ch:10
[11407.769971] =====>rtl8192_set_chan()====ch:11
[11407.889806] =====>rtl8192_set_chan()====ch:12
[11408.009731] =====>rtl8192_set_chan()====ch:13
[11408.130877] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11408.130901] ===>rtllib_associate_procedure_wq(), chan:1
[11408.130906] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11408.130911] =====>rtl8192_set_chan()====ch:1
[11408.141574] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11408.141598] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11408.142217] ===>rtllib_associate_procedure_wq(), chan:1
[11408.142224] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11408.142229] =====>rtl8192_set_chan()====ch:1
[11408.154392] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11408.158352] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11408.158359] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11408.158365] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11408.158371] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11408.158376] Associated successfully
[11408.158380] normal associate
[11408.158391] Using G rates:108
[11408.158395] Successfully associated, ht not enabled(0, 0)
[11408.158402] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11408.158411] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11408.159816] RX: IEEE802.1X EAPOL frame!
[11408.166607] RX: IEEE802.1X EAPOL frame!
[11408.166875] alg name:TKIP
[11408.167512] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11408.175717] RX: IEEE802.1X EAPOL frame!
[11408.176174] alg name:TKIP
[11408.176805] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11432.161410] ==========>received disassoc/deauth(c0) frame, reason code:a
[11432.161444] notify_wx_assoc_event(): Tell user space disconnected
[11432.161454] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11432.161457] ====>remove Tx_TS_admin_list
[11432.161461] ====>remove Tx_TS_admin_list
[11432.161506] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11432.262740] =====>rtl8192_set_chan()====ch:1
[11432.382149] =====>rtl8192_set_chan()====ch:2
[11432.501960] =====>rtl8192_set_chan()====ch:3
[11432.621979] =====>rtl8192_set_chan()====ch:4
[11432.741885] =====>rtl8192_set_chan()====ch:5
[11432.861777] =====>rtl8192_set_chan()====ch:6
[11432.981678] =====>rtl8192_set_chan()====ch:7
[11433.101645] =====>rtl8192_set_chan()====ch:8
[11433.221568] =====>rtl8192_set_chan()====ch:9
[11433.341350] =====>rtl8192_set_chan()====ch:10
[11433.461341] =====>rtl8192_set_chan()====ch:11
[11433.581213] =====>rtl8192_set_chan()====ch:12
[11433.701170] =====>rtl8192_set_chan()====ch:13
[11433.822373] ===>rtllib_start_scan()
[11433.822455] =====>rtl8192_set_chan()====ch:2
[11433.832617] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11433.832774] ===>rtllib_associate_procedure_wq(), chan:1
[11433.832783] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11433.832792] =====>rtl8192_set_chan()====ch:1
[11433.843016] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11433.843593] ===>rtllib_associate_procedure_wq(), chan:1
[11433.843599] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11433.843603] =====>rtl8192_set_chan()====ch:1
[11433.857432] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11433.861302] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11433.861307] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11433.861310] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11433.861314] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11433.861317] Associated successfully
[11433.861319] normal associate
[11433.861328] Using G rates:108
[11433.861330] Successfully associated, ht not enabled(0, 0)
[11433.861334] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11433.861340] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11433.862810] RX: IEEE802.1X EAPOL frame!
[11433.870236] RX: IEEE802.1X EAPOL frame!
[11433.870449] alg name:TKIP
[11433.871109] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11433.875589] RX: IEEE802.1X EAPOL frame!
[11433.875819] alg name:TKIP
[11433.876443] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11454.222552] ==========>received disassoc/deauth(c0) frame, reason code:a
[11454.222607] notify_wx_assoc_event(): Tell user space disconnected
[11454.222622] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11454.222627] ====>remove Tx_TS_admin_list
[11454.222633] ====>remove Tx_TS_admin_list
[11454.222686] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11454.377472] =====>rtl8192_set_chan()====ch:1
[11454.496079] =====>rtl8192_set_chan()====ch:2
[11454.616023] =====>rtl8192_set_chan()====ch:3
[11454.736094] =====>rtl8192_set_chan()====ch:4
[11454.855883] =====>rtl8192_set_chan()====ch:5
[11454.975774] =====>rtl8192_set_chan()====ch:6
[11455.095702] =====>rtl8192_set_chan()====ch:7
[11455.215608] =====>rtl8192_set_chan()====ch:8
[11455.335520] =====>rtl8192_set_chan()====ch:9
[11455.455397] =====>rtl8192_set_chan()====ch:10
[11455.575440] =====>rtl8192_set_chan()====ch:11
[11455.695262] =====>rtl8192_set_chan()====ch:12
[11455.815211] =====>rtl8192_set_chan()====ch:13
[11455.935880] ===>rtllib_start_scan()
[11455.935926] =====>rtl8192_set_chan()====ch:2
[11455.946075] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11455.946142] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11455.946974] ===>rtllib_associate_procedure_wq(), chan:1
[11455.946980] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11455.946986] =====>rtl8192_set_chan()====ch:1
[11455.958805] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11455.969103] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11455.969111] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11455.969115] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11455.969120] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11455.969125] Associated successfully
[11455.969128] normal associate
[11455.969142] Using G rates:108
[11455.969145] Successfully associated, ht not enabled(0, 0)
[11455.969150] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11455.969159] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11455.970668] RX: IEEE802.1X EAPOL frame!
[11455.976706] RX: IEEE802.1X EAPOL frame!
[11455.976959] alg name:TKIP
[11455.977599] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11455.981961] RX: IEEE802.1X EAPOL frame!
[11455.982080] alg name:TKIP
[11455.982699] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11470.414982] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11470.414993] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11470.414999] ====>remove Tx_TS_admin_list
[11470.415005] ====>remove Tx_TS_admin_list
[11470.415015] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11470.415026] notify_wx_assoc_event(): Tell user space disconnected
[11470.515588] =====>rtl8192_set_chan()====ch:1
[11470.634463] =====>rtl8192_set_chan()====ch:2
[11470.754361] =====>rtl8192_set_chan()====ch:3
[11470.874279] =====>rtl8192_set_chan()====ch:4
[11470.994257] =====>rtl8192_set_chan()====ch:5
[11471.114122] =====>rtl8192_set_chan()====ch:6
[11471.234030] =====>rtl8192_set_chan()====ch:7
[11471.353970] =====>rtl8192_set_chan()====ch:8
[11471.473878] =====>rtl8192_set_chan()====ch:9
[11471.593747] =====>rtl8192_set_chan()====ch:10
[11471.713673] =====>rtl8192_set_chan()====ch:11
[11471.833593] =====>rtl8192_set_chan()====ch:12
[11471.953552] =====>rtl8192_set_chan()====ch:13
[11472.074934] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11472.074972] ===>rtllib_associate_procedure_wq(), chan:1
[11472.074981] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11472.074989] =====>rtl8192_set_chan()====ch:1
[11472.085216] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11472.085230] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11472.086139] ===>rtllib_associate_procedure_wq(), chan:1
[11472.086145] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11472.086149] =====>rtl8192_set_chan()====ch:1
[11472.097991] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11472.105357] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11472.105363] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11472.105367] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11472.105370] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11472.105374] Associated successfully
[11472.105376] normal associate
[11472.105385] Using G rates:108
[11472.105388] Successfully associated, ht not enabled(0, 0)
[11472.105392] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11472.105399] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11472.106873] RX: IEEE802.1X EAPOL frame!
[11472.113758] RX: IEEE802.1X EAPOL frame!
[11472.113947] alg name:TKIP
[11472.114586] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11472.119179] RX: IEEE802.1X EAPOL frame!
[11472.119449] alg name:TKIP
[11472.120077] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11477.715240] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11477.769414] =====>rtl8192_set_chan()====ch:1
[11477.889214] =====>rtl8192_set_chan()====ch:2
[11478.009128] =====>rtl8192_set_chan()====ch:3
[11478.129086] =====>rtl8192_set_chan()====ch:4
[11478.248979] =====>rtl8192_set_chan()====ch:5
[11478.368841] =====>rtl8192_set_chan()====ch:6
[11478.488947] =====>rtl8192_set_chan()====ch:7
[11478.608724] =====>rtl8192_set_chan()====ch:8
[11478.728604] =====>rtl8192_set_chan()====ch:9
[11478.848555] =====>rtl8192_set_chan()====ch:10
[11478.968382] =====>rtl8192_set_chan()====ch:11
[11479.088363] =====>rtl8192_set_chan()====ch:12
[11479.208385] =====>rtl8192_set_chan()====ch:13
[11479.328243] =====>rtl8192_set_chan()====ch:1
[11479.338492] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11479.338503] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11500.393515] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11500.393522] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11500.393526] ====>remove Tx_TS_admin_list
[11500.393530] ====>remove Tx_TS_admin_list
[11500.393536] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11500.393600] notify_wx_assoc_event(): Tell user space disconnected
[11500.494195] =====>rtl8192_set_chan()====ch:1
[11500.612773] =====>rtl8192_set_chan()====ch:2
[11500.732706] =====>rtl8192_set_chan()====ch:3
[11500.852691] =====>rtl8192_set_chan()====ch:4
[11500.972540] =====>rtl8192_set_chan()====ch:5
[11501.092494] =====>rtl8192_set_chan()====ch:6
[11501.212308] =====>rtl8192_set_chan()====ch:7
[11501.332406] =====>rtl8192_set_chan()====ch:8
[11501.452240] =====>rtl8192_set_chan()====ch:9
[11501.572127] =====>rtl8192_set_chan()====ch:10
[11501.692029] =====>rtl8192_set_chan()====ch:11
[11501.811954] =====>rtl8192_set_chan()====ch:12
[11501.931889] =====>rtl8192_set_chan()====ch:13
[11502.053665] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11502.053734] ===>rtllib_associate_procedure_wq(), chan:1
[11502.053741] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11502.053750] =====>rtl8192_set_chan()====ch:1
[11502.064051] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11502.064075] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11502.065331] ===>rtllib_associate_procedure_wq(), chan:1
[11502.065343] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11502.065352] =====>rtl8192_set_chan()====ch:1
[11502.077169] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11502.081070] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11502.081078] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11502.081084] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11502.081089] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11502.081094] Associated successfully
[11502.081098] normal associate
[11502.081108] Using G rates:108
[11502.081112] Successfully associated, ht not enabled(0, 0)
[11502.081118] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11502.081127] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11502.082629] RX: IEEE802.1X EAPOL frame!
[11502.091524] RX: IEEE802.1X EAPOL frame!
[11502.091779] alg name:TKIP
[11502.092411] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11502.096824] RX: IEEE802.1X EAPOL frame!
[11502.097027] alg name:TKIP
[11502.097652] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11522.377345] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11522.377352] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11522.377356] ====>remove Tx_TS_admin_list
[11522.377360] ====>remove Tx_TS_admin_list
[11522.377366] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11522.377379] notify_wx_assoc_event(): Tell user space disconnected
[11522.477789] =====>rtl8192_set_chan()====ch:1
[11522.596894] =====>rtl8192_set_chan()====ch:2
[11522.716885] =====>rtl8192_set_chan()====ch:3
[11522.836739] =====>rtl8192_set_chan()====ch:4
[11522.956685] =====>rtl8192_set_chan()====ch:5
[11523.076573] =====>rtl8192_set_chan()====ch:6
[11523.196578] =====>rtl8192_set_chan()====ch:7
[11523.316417] =====>rtl8192_set_chan()====ch:8
[11523.436366] =====>rtl8192_set_chan()====ch:9
[11523.556289] =====>rtl8192_set_chan()====ch:10
[11523.676169] =====>rtl8192_set_chan()====ch:11
[11523.796077] =====>rtl8192_set_chan()====ch:12
[11523.916011] =====>rtl8192_set_chan()====ch:13
[11524.036920] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11524.037004] ===>rtllib_associate_procedure_wq(), chan:1
[11524.037014] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11524.037021] =====>rtl8192_set_chan()====ch:1
[11524.047523] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11524.047544] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11524.048245] ===>rtllib_associate_procedure_wq(), chan:1
[11524.048254] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11524.048261] =====>rtl8192_set_chan()====ch:1
[11524.061183] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11524.066109] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11524.066117] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11524.066123] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11524.066129] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11524.066134] Associated successfully
[11524.066138] normal associate
[11524.066148] Using G rates:108
[11524.066152] Successfully associated, ht not enabled(0, 0)
[11524.066159] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11524.066168] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11524.067490] RX: IEEE802.1X EAPOL frame!
[11524.075110] RX: IEEE802.1X EAPOL frame!
[11524.075340] alg name:TKIP
[11524.076078] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11524.080570] RX: IEEE802.1X EAPOL frame!
[11524.080988] alg name:TKIP
[11524.081611] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11536.342385] ==========>received disassoc/deauth(c0) frame, reason code:a
[11536.342420] notify_wx_assoc_event(): Tell user space disconnected
[11536.342434] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11536.342438] ====>remove Tx_TS_admin_list
[11536.342442] ====>remove Tx_TS_admin_list
[11536.342490] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11536.576298] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11536.576487] =====>rtl8192_set_chan()====ch:1
[11536.686660] =====>rtl8192_set_chan()====ch:2
[11536.806638] =====>rtl8192_set_chan()====ch:3
[11536.926494] =====>rtl8192_set_chan()====ch:4
[11537.046475] =====>rtl8192_set_chan()====ch:5
[11537.166397] =====>rtl8192_set_chan()====ch:6
[11537.286263] =====>rtl8192_set_chan()====ch:7
[11537.406226] =====>rtl8192_set_chan()====ch:8
[11537.526150] =====>rtl8192_set_chan()====ch:9
[11537.646029] =====>rtl8192_set_chan()====ch:10
[11537.767144] =====>rtl8192_set_chan()====ch:11
[11537.885800] =====>rtl8192_set_chan()====ch:12
[11538.005778] =====>rtl8192_set_chan()====ch:13
[11538.127380] ===>rtllib_start_scan()
[11538.127417] =====>rtl8192_set_chan()====ch:2
[11538.137588] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11538.137654] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11538.137857] ===>rtllib_associate_procedure_wq(), chan:1
[11538.137863] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11538.137869] =====>rtl8192_set_chan()====ch:1
[11538.150028] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11538.153920] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11538.153931] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11538.153941] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11538.153950] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11538.153958] Associated successfully
[11538.153964] normal associate
[11538.153981] Using G rates:108
[11538.153988] Successfully associated, ht not enabled(0, 0)
[11538.153997] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11538.154010] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11538.155420] RX: IEEE802.1X EAPOL frame!
[11538.253509] RX: IEEE802.1X EAPOL frame!
[11538.259951] RX: IEEE802.1X EAPOL frame!
[11538.260226] alg name:TKIP
[11538.260859] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11538.265452] RX: IEEE802.1X EAPOL frame!
[11538.265788] alg name:TKIP
[11538.266419] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11554.354186] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11554.354197] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11554.354203] ====>remove Tx_TS_admin_list
[11554.354209] ====>remove Tx_TS_admin_list
[11554.354218] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11554.354229] notify_wx_assoc_event(): Tell user space disconnected
[11554.454622] =====>rtl8192_set_chan()====ch:1
[11554.573824] =====>rtl8192_set_chan()====ch:2
[11554.693723] =====>rtl8192_set_chan()====ch:3
[11554.813639] =====>rtl8192_set_chan()====ch:4
[11554.933589] =====>rtl8192_set_chan()====ch:5
[11555.053510] =====>rtl8192_set_chan()====ch:6
[11555.173371] =====>rtl8192_set_chan()====ch:7
[11555.293315] =====>rtl8192_set_chan()====ch:8
[11555.413225] =====>rtl8192_set_chan()====ch:9
[11555.533076] =====>rtl8192_set_chan()====ch:10
[11555.653034] =====>rtl8192_set_chan()====ch:11
[11555.772881] =====>rtl8192_set_chan()====ch:12
[11555.892996] =====>rtl8192_set_chan()====ch:13
[11556.014119] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11556.014159] ===>rtllib_associate_procedure_wq(), chan:1
[11556.014169] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11556.014178] =====>rtl8192_set_chan()====ch:1
[11556.024462] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11556.024478] ===>rtllib_associate_procedure_wq(), chan:1
[11556.024482] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11556.024487] =====>rtl8192_set_chan()====ch:1
[11556.034640] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11556.035206] ===>rtllib_associate_procedure_wq(), chan:1
[11556.035212] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11556.035217] =====>rtl8192_set_chan()====ch:1
[11556.047083] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11556.052757] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11556.052766] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11556.052772] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11556.052779] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11556.052784] Associated successfully
[11556.052789] normal associate
[11556.052800] Using G rates:108
[11556.052806] Successfully associated, ht not enabled(0, 0)
[11556.052814] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11556.052830] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11556.054217] RX: IEEE802.1X EAPOL frame!
[11556.060304] RX: IEEE802.1X EAPOL frame!
[11556.060459] alg name:TKIP
[11556.061095] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11556.065606] RX: IEEE802.1X EAPOL frame!
[11556.065795] alg name:TKIP
[11556.066421] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11569.682770] ==========>received disassoc/deauth(c0) frame, reason code:a
[11569.682785] notify_wx_assoc_event(): Tell user space disconnected
[11569.682794] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11569.682797] ====>remove Tx_TS_admin_list
[11569.682801] ====>remove Tx_TS_admin_list
[11569.682843] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11569.844016] =====>rtl8192_set_chan()====ch:1
[11569.962684] =====>rtl8192_set_chan()====ch:2
[11570.082535] =====>rtl8192_set_chan()====ch:3
[11570.202452] =====>rtl8192_set_chan()====ch:4
[11570.322450] =====>rtl8192_set_chan()====ch:5
[11570.442350] =====>rtl8192_set_chan()====ch:6
[11570.562236] =====>rtl8192_set_chan()====ch:7
[11570.682198] =====>rtl8192_set_chan()====ch:8
[11570.802094] =====>rtl8192_set_chan()====ch:9
[11570.922055] =====>rtl8192_set_chan()====ch:10
[11571.041873] =====>rtl8192_set_chan()====ch:11
[11571.161782] =====>rtl8192_set_chan()====ch:12
[11571.281742] =====>rtl8192_set_chan()====ch:13
[11571.402495] ===>rtllib_start_scan()
[11571.402578] =====>rtl8192_set_chan()====ch:2
[11571.412674] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11571.412739] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11571.413572] ===>rtllib_associate_procedure_wq(), chan:1
[11571.413580] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11571.413586] =====>rtl8192_set_chan()====ch:1
[11571.427429] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11571.431318] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11571.431325] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11571.431331] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11571.431336] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11571.431345] Associated successfully
[11571.431347] normal associate
[11571.431357] Using G rates:108
[11571.431359] Successfully associated, ht not enabled(0, 0)
[11571.431363] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11571.431369] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11571.432815] RX: IEEE802.1X EAPOL frame!
[11571.439921] RX: IEEE802.1X EAPOL frame!
[11571.440059] alg name:TKIP
[11571.440692] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11571.445200] RX: IEEE802.1X EAPOL frame!
[11571.445342] alg name:TKIP
[11571.445966] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11586.331306] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11586.331318] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11586.331324] ====>remove Tx_TS_admin_list
[11586.331330] ====>remove Tx_TS_admin_list
[11586.331340] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11586.331352] notify_wx_assoc_event(): Tell user space disconnected
[11586.431884] =====>rtl8192_set_chan()====ch:1
[11586.550637] =====>rtl8192_set_chan()====ch:2
[11586.670666] =====>rtl8192_set_chan()====ch:3
[11586.790596] =====>rtl8192_set_chan()====ch:4
[11586.910450] =====>rtl8192_set_chan()====ch:5
[11587.030410] =====>rtl8192_set_chan()====ch:6
[11587.150252] =====>rtl8192_set_chan()====ch:7
[11587.270186] =====>rtl8192_set_chan()====ch:8
[11587.390108] =====>rtl8192_set_chan()====ch:9
[11587.509997] =====>rtl8192_set_chan()====ch:10
[11587.630002] =====>rtl8192_set_chan()====ch:11
[11587.749800] =====>rtl8192_set_chan()====ch:12
[11587.869759] =====>rtl8192_set_chan()====ch:13
[11587.990995] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11587.991186] ===>rtllib_associate_procedure_wq(), chan:1
[11587.991197] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11587.991206] =====>rtl8192_set_chan()====ch:1
[11588.001606] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11588.001629] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11588.001932] ===>rtllib_associate_procedure_wq(), chan:1
[11588.001937] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11588.001942] =====>rtl8192_set_chan()====ch:1
[11588.014027] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11588.019837] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11588.019850] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11588.019859] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11588.019867] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11588.019874] Associated successfully
[11588.019880] normal associate
[11588.019895] Using G rates:108
[11588.019901] Successfully associated, ht not enabled(0, 0)
[11588.019910] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11588.019923] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11588.021257] RX: IEEE802.1X EAPOL frame!
[11588.028688] RX: IEEE802.1X EAPOL frame!
[11588.028931] alg name:TKIP
[11588.029621] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11588.034160] RX: IEEE802.1X EAPOL frame!
[11588.034637] alg name:TKIP
[11588.035279] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11598.625984] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[11598.626081] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11598.681974] =====>rtl8192_set_chan()====ch:1
[11598.801856] =====>rtl8192_set_chan()====ch:2
[11598.921741] =====>rtl8192_set_chan()====ch:3
[11599.041672] =====>rtl8192_set_chan()====ch:4
[11599.161633] =====>rtl8192_set_chan()====ch:5
[11599.281578] =====>rtl8192_set_chan()====ch:6
[11599.401338] =====>rtl8192_set_chan()====ch:7
[11599.521381] =====>rtl8192_set_chan()====ch:8
[11599.641230] =====>rtl8192_set_chan()====ch:9
[11599.761204] =====>rtl8192_set_chan()====ch:10
[11599.880989] =====>rtl8192_set_chan()====ch:11
[11600.000983] =====>rtl8192_set_chan()====ch:12
[11600.120894] =====>rtl8192_set_chan()====ch:13
[11600.240870] =====>rtl8192_set_chan()====ch:1
[11600.250947] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11600.250958] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11620.306542] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11620.306555] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11620.306560] ====>remove Tx_TS_admin_list
[11620.306566] ====>remove Tx_TS_admin_list
[11620.306576] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11620.306643] notify_wx_assoc_event(): Tell user space disconnected
[11620.407282] =====>rtl8192_set_chan()====ch:1
[11620.526183] =====>rtl8192_set_chan()====ch:2
[11620.646085] =====>rtl8192_set_chan()====ch:3
[11620.765896] =====>rtl8192_set_chan()====ch:4
[11620.875881] =====>rtl8192_set_chan()====ch:5
[11620.995859] =====>rtl8192_set_chan()====ch:6
[11621.115787] =====>rtl8192_set_chan()====ch:7
[11621.235646] =====>rtl8192_set_chan()====ch:8
[11621.355611] =====>rtl8192_set_chan()====ch:9
[11621.475511] =====>rtl8192_set_chan()====ch:10
[11621.595411] =====>rtl8192_set_chan()====ch:11
[11621.715281] =====>rtl8192_set_chan()====ch:12
[11621.835203] =====>rtl8192_set_chan()====ch:13
[11621.956506] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11621.956546] ===>rtllib_associate_procedure_wq(), chan:1
[11621.956555] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11621.956564] =====>rtl8192_set_chan()====ch:1
[11621.966791] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11621.966809] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11621.967708] ===>rtllib_associate_procedure_wq(), chan:1
[11621.967713] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11621.967717] =====>rtl8192_set_chan()====ch:1
[11621.979981] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11621.984971] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11621.984976] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11621.984980] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11621.985040] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11621.985046] Associated successfully
[11621.985050] normal associate
[11621.985060] Using G rates:108
[11621.985064] Successfully associated, ht not enabled(0, 0)
[11621.985071] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11621.985080] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11621.986504] RX: IEEE802.1X EAPOL frame!
[11621.993265] RX: IEEE802.1X EAPOL frame!
[11621.993422] alg name:TKIP
[11621.994054] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11621.998514] RX: IEEE802.1X EAPOL frame!
[11621.998697] alg name:TKIP
[11621.999320] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11642.291110] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:1, connect another one
[11642.291122] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11642.291128] ====>remove Tx_TS_admin_list
[11642.291134] ====>remove Tx_TS_admin_list
[11642.291143] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11642.291155] notify_wx_assoc_event(): Tell user space disconnected
[11642.391640] =====>rtl8192_set_chan()====ch:1
[11642.510274] =====>rtl8192_set_chan()====ch:2
[11642.630204] =====>rtl8192_set_chan()====ch:3
[11642.750231] =====>rtl8192_set_chan()====ch:4
[11642.870153] =====>rtl8192_set_chan()====ch:5
[11642.989924] =====>rtl8192_set_chan()====ch:6
[11643.109884] =====>rtl8192_set_chan()====ch:7
[11643.229827] =====>rtl8192_set_chan()====ch:8
[11643.349677] =====>rtl8192_set_chan()====ch:9
[11643.469581] =====>rtl8192_set_chan()====ch:10
[11643.589432] =====>rtl8192_set_chan()====ch:11
[11643.709396] =====>rtl8192_set_chan()====ch:12
[11643.829292] =====>rtl8192_set_chan()====ch:13
[11643.951353] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11643.951427] ===>rtllib_associate_procedure_wq(), chan:1
[11643.951437] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11643.951447] =====>rtl8192_set_chan()====ch:1
[11643.961925] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11643.961940] ===>rtllib_associate_procedure_wq(), chan:1
[11643.961944] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11643.961949] =====>rtl8192_set_chan()====ch:1
[11643.972143] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11643.972772] ===>rtllib_associate_procedure_wq(), chan:1
[11643.972779] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11643.972785] =====>rtl8192_set_chan()====ch:1
[11643.986151] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11643.990034] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11643.990041] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11643.990046] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11643.990052] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11643.990057] Associated successfully
[11643.990060] normal associate
[11643.990070] Using G rates:108
[11643.990073] Successfully associated, ht not enabled(0, 0)
[11643.990078] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11643.990086] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11643.991591] RX: IEEE802.1X EAPOL frame!
[11643.997719] RX: IEEE802.1X EAPOL frame!
[11643.997926] alg name:TKIP
[11643.998552] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11644.004028] RX: IEEE802.1X EAPOL frame!
[11644.004469] alg name:TKIP
[11644.005091] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[11659.746680] ==========>received disassoc/deauth(c0) frame, reason code:a
[11659.746702] notify_wx_assoc_event(): Tell user space disconnected
[11659.746717] ===========>RemovePeerTS,00:27:0d:71:8f:80
[11659.746723] ====>remove Tx_TS_admin_list
[11659.746729] ====>remove Tx_TS_admin_list
[11659.746785] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11659.879663] =====>rtl8192_set_chan()====ch:1
[11659.997612] =====>rtl8192_set_chan()====ch:2
[11660.117549] =====>rtl8192_set_chan()====ch:3
[11660.237397] =====>rtl8192_set_chan()====ch:4
[11660.357315] =====>rtl8192_set_chan()====ch:5
[11660.477258] =====>rtl8192_set_chan()====ch:6
[11660.597171] =====>rtl8192_set_chan()====ch:7
[11660.717110] =====>rtl8192_set_chan()====ch:8
[11660.837018] =====>rtl8192_set_chan()====ch:9
[11660.956941] =====>rtl8192_set_chan()====ch:10
[11661.076863] =====>rtl8192_set_chan()====ch:11
[11661.196759] =====>rtl8192_set_chan()====ch:12
[11661.316797] =====>rtl8192_set_chan()====ch:13
[11661.437938] ===>rtllib_start_scan()
[11661.437973] =====>rtl8192_set_chan()====ch:2
[11661.448069] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11661.448134] Linking with Ubuntu-Hanscom,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[11661.448995] ===>rtllib_associate_procedure_wq(), chan:1
[11661.449001] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[11661.449006] =====>rtl8192_set_chan()====ch:1
[11661.463415] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[11661.467358] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[11661.467366] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[11661.467372] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[11661.467378] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[11661.467383] Associated successfully
[11661.467387] normal associate
[11661.467402] Using G rates:108
[11661.467407] Successfully associated, ht not enabled(0, 0)
[11661.467413] ===>rtl8192se_link_change():ieee->iw_mode is 2
[11661.467423] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[11661.468877] RX: IEEE802.1X EAPOL frame!
[11661.478162] RX: IEEE802.1X EAPOL frame!
[11661.478576] alg name:TKIP
[11661.479225] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0
[11661.483367] RX: IEEE802.1X EAPOL frame!
[11661.483528] alg name:TKIP
[11661.484156] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0