From 5635192ec3e86c87aec5d774018bd52ef936061a Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 21 Jan 2014 16:52:29 -0800 Subject: [PATCH 1/2] i2c-piix4: Add support for AMD ML and CZ SMBus changes The locations of SMBus register base address and enablement bit are changed from AMD ML, which need this patch to be supported. Signed-off-by: Shane Huang --- Documentation/i2c/busses/i2c-piix4 | 2 +- drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-piix4.c | 28 +++++++++++++++++++++++----- 3 files changed, 25 insertions(+), 6 deletions(-) diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index c097e0f..aa959fd 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -13,7 +13,7 @@ Supported adapters: * AMD SP5100 (SB700 derivative found on some server mainboards) Datasheet: Publicly available at the AMD website http://support.amd.com/us/Embedded_TechDocs/44413.pdf - * AMD Hudson-2, CZ + * AMD Hudson-2, ML, CZ Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 6bcdea5..f5ed031 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -152,6 +152,7 @@ config I2C_PIIX4 ATI SB700/SP5100 ATI SB800 AMD Hudson-2 + AMD ML AMD CZ Serverworks OSB4 Serverworks CSB5 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index a028617..f71b4d3 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 - AMD Hudson-2, CZ + AMD Hudson-2, ML, CZ SMSC Victory66 Note: we assume there can only be one device, with one or more @@ -235,7 +235,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, { unsigned short piix4_smba; unsigned short smba_idx = 0xcd6; - u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en; + u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status; + u8 i2ccfg, i2ccfg_offset = 0x10; /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { @@ -245,7 +246,15 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, } /* Determine the address of the SMBus areas */ - smb_en = (aux) ? 0x28 : 0x2c; + if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && + PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + PIIX4_dev->revision >= 0x41) || + (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && + PIIX4_dev->device == 0x790b && + PIIX4_dev->revision >= 0x49)) + smb_en = 0x00; + else + smb_en = (aux) ? 0x28 : 0x2c; if (!request_region(smba_idx, 2, "smba_idx")) { dev_err(&PIIX4_dev->dev, "SMBus base address index region " @@ -258,13 +267,22 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, smba_en_hi = inb_p(smba_idx + 1); release_region(smba_idx, 2); - if ((smba_en_lo & 1) == 0) { + if (!smb_en) { + smb_en_status = smba_en_lo & 0x10; + piix4_smba = smba_en_hi << 8; + if (aux) + piix4_smba |= 0x20; + } else { + smb_en_status = smba_en_lo & 0x01; + piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; + } + + if (!smb_en_status) { dev_err(&PIIX4_dev->dev, "Host SMBus controller not enabled!\n"); return -ENODEV; } - piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) return -ENODEV; -- 1.7.9.5