[ 0.000000] Linux version 2.6.24-12-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6e10 [ 0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521936 [ 0.000000] On node 0 totalpages: 521936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290275 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6DE0 checksum 0 [ 0.000000] ACPI: RSDP 000F6DE0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7F6D7278, 00AC (r1 SECCSD LH43STAR 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F6DFB37, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7F6D9266, 685D (r2 INTEL CRESTLNE 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 7F6E2FC0, 0040 [ 0.000000] ACPI: APIC 7F6DFC2B, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7F6DFC93, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F6DFCCB, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 7F6DFD07, 0032 (r1 Intel CRESTLN 6040000 5A52) [ 0.000000] ACPI: TMOR 7F6DFD39, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: APIC 7F6DFD5F, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: HPET 7F6DFDC7, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: BOOT 7F6DFDFF, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: ASF! 7F6DFE27, 0063 (r16 CETP CETP 6040000 PTL 1) [ 0.000000] ACPI: SLIC 7F6DFE8A, 0176 (r1 SECCSD LH43STAR 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F6D8C17, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D8585, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D854C, 0039 (r1 BrtRef DD01BRT 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D78B0, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D780A, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D7324, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Samsung [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517859 [ 0.000000] Kernel command line: root=/dev/mapper/portus-hardy_root ro cryptopts=cryptlvm=portus,source=/dev/sda3 resume=/dev/mapper/portus-hardy_swap quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1795.597 MHz processor. [ 8.324792] Console: colour VGA+ 80x25 [ 8.324797] console [tty0] enabled [ 8.325103] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 8.325479] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 8.456928] Memory: 2057140k/2087744k available (2164k kernel code, 29408k reserved, 1007k data, 364k init, 1170240k highmem) [ 8.456937] virtual kernel memory layout: [ 8.456939] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 8.456941] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 8.456942] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 8.456943] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 8.456945] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 8.456946] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 8.456948] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 8.456952] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 8.456999] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 8.457142] hpet clockevent registered [ 8.537105] Calibrating delay using timer specific routine.. 3595.51 BogoMIPS (lpj=7191028) [ 8.537131] Security Framework initialized [ 8.537137] SELinux: Disabled at boot. [ 8.537154] AppArmor: AppArmor initialized [ 8.537159] Failure registering capabilities with primary security module. [ 8.537169] Mount-cache hash table entries: 512 [ 8.537322] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 8.537333] monitor/mwait feature present. [ 8.537335] using mwait in idle threads. [ 8.537340] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8.537343] CPU: L2 cache: 2048K [ 8.537347] CPU: Physical Processor ID: 0 [ 8.537349] CPU: Processor Core ID: 0 [ 8.537352] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001 [ 8.537364] Compat vDSO mapped to ffffe000. [ 8.537380] Checking 'hlt' instruction... OK. [ 8.553606] SMP alternatives: switching to UP code [ 8.555804] Early unpacking initramfs... done [ 9.075535] ACPI: Core revision 20070126 [ 9.075593] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 9.088494] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d [ 9.088514] SMP alternatives: switching to SMP code [ 9.089438] Booting processor 1/1 eip 3000 [ 9.099752] Initializing CPU#1 [ 9.176740] Calibrating delay using timer specific routine.. 3591.24 BogoMIPS (lpj=7182487) [ 9.176750] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 9.176757] monitor/mwait feature present. [ 9.176761] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.176764] CPU: L2 cache: 2048K [ 9.176766] CPU: Physical Processor ID: 0 [ 9.176768] CPU: Processor Core ID: 1 [ 9.176770] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001 [ 9.177440] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d [ 9.177468] Total of 2 processors activated (7186.75 BogoMIPS). [ 9.177641] ENABLING IO-APIC IRQs [ 9.177847] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 9.324793] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 9.344802] Brought up 2 CPUs [ 9.344831] CPU0 attaching sched-domain: [ 9.344834] domain 0: span 03 [ 9.344837] groups: 01 02 [ 9.344841] CPU1 attaching sched-domain: [ 9.344843] domain 0: span 03 [ 9.344846] groups: 02 01 [ 9.345123] net_namespace: 64 bytes [ 9.345139] Booting paravirtualized kernel on bare hardware [ 9.345792] Time: 14:29:49 Date: 03/15/08 [ 9.345861] NET: Registered protocol family 16 [ 9.346101] EISA bus registered [ 9.346107] ACPI: bus type pci registered [ 9.346322] PCI: PCI BIOS revision 2.10 entry at 0xfd845, last bus=5 [ 9.346325] PCI: Using configuration type 1 [ 9.346327] Setting up standard PCI resources [ 9.349638] ACPI: EC: Look up EC in DSDT [ 9.352199] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 9.355410] ACPI: Interpreter enabled [ 9.355414] ACPI: (supports S0 S3 S4 S5) [ 9.355434] ACPI: Using IOAPIC for interrupt routing [ 9.355854] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 9.364261] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 9.364265] ACPI: EC: driver started in interrupt mode [ 9.364324] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 9.365409] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 9.365415] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 9.366767] PCI: Transparent bridge - 0000:00:1e.0 [ 9.366866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 9.367386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 9.367570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 9.367782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 9.382843] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10 [ 9.382985] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 9.383122] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 9.383259] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 9.383394] ACPI: PCI Interrupt Link [LNKE] (IRQs *11) [ 9.383530] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 9.383664] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 9.383799] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 9.383998] ACPI: Power Resource [FN00] (off) [ 9.384079] Linux Plug and Play Support v0.97 (c) Adam Belay [ 9.384117] pnp: PnP ACPI init [ 9.384127] ACPI: bus type pnp registered [ 9.386933] pnp: PnP ACPI: found 10 devices [ 9.386937] ACPI: ACPI bus type pnp unregistered [ 9.386943] PnPBIOS: Disabled by ACPI PNP [ 9.387232] PCI: Using ACPI for IRQ routing [ 9.387236] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 9.436612] NET: Registered protocol family 8 [ 9.436615] NET: Registered protocol family 20 [ 9.436656] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 9.436663] hpet0: 3 64-bit timers, 14318180 Hz [ 9.437706] AppArmor: AppArmor Filesystem Enabled [ 9.440602] Time: tsc clocksource has been installed. [ 9.440611] Switched to high resolution mode on CPU 0 [ 9.440744] Switched to high resolution mode on CPU 1 [ 9.452592] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 9.452597] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 9.452601] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 9.452605] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 9.452609] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 9.452613] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 9.452617] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 9.452621] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 9.452631] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 9.452640] system 00:06: ioport range 0x680-0x69f has been reserved [ 9.452644] system 00:06: ioport range 0x6b0-0x6ff has been reserved [ 9.452648] system 00:06: ioport range 0x800-0x80f has been reserved [ 9.452651] system 00:06: ioport range 0x900-0x90f has been reserved [ 9.452655] system 00:06: ioport range 0x1000-0x107f has been reserved [ 9.452659] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 9.452662] system 00:06: ioport range 0x1640-0x164f has been reserved [ 9.452666] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 9.483187] PCI: Bridge: 0000:00:1c.0 [ 9.483189] IO window: disabled. [ 9.483196] MEM window: f0300000-f03fffff [ 9.483202] PREFETCH window: disabled. [ 9.483209] PCI: Bridge: 0000:00:1c.1 [ 9.483212] IO window: 2000-2fff [ 9.483219] MEM window: f0200000-f02fffff [ 9.483224] PREFETCH window: disabled. [ 9.483237] PCI: Bus 5, cardbus bridge: 0000:04:09.0 [ 9.483239] IO window: 00001400-000014ff [ 9.483245] IO window: 00003000-000030ff [ 9.483251] PREFETCH window: 8c000000-8fffffff [ 9.483256] MEM window: 90000000-93ffffff [ 9.483262] PCI: Bridge: 0000:00:1e.0 [ 9.483264] IO window: disabled. [ 9.483270] MEM window: f0400000-f04fffff [ 9.483276] PREFETCH window: disabled. [ 9.483310] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 9.483319] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 9.483347] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 9.483354] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 9.483370] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 9.483453] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 20 (level, low) -> IRQ 18 [ 9.483471] NET: Registered protocol family 2 [ 9.520586] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 9.520884] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 9.521438] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 9.521692] TCP: Hash tables configured (established 131072 bind 65536) [ 9.521695] TCP reno registered [ 9.532671] checking if image is initramfs... it is [ 10.555879] Freeing initrd memory: 8107k freed [ 10.556056] Simple Boot Flag at 0x36 set to 0x1 [ 10.556845] audit: initializing netlink socket (disabled) [ 10.556861] audit(1205591389.972:1): initialized [ 10.557136] highmem bounce pool size: 64 pages [ 10.559719] VFS: Disk quotas dquot_6.5.1 [ 10.559817] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.559994] io scheduler noop registered [ 10.559997] io scheduler anticipatory registered [ 10.560000] io scheduler deadline registered [ 10.560014] io scheduler cfq registered (default) [ 10.560027] Boot video device is 0000:00:02.0 [ 10.560307] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 10.560379] assign_interrupt_mode Found MSI capability [ 10.560439] Allocate Port Service[0000:00:1c.0:pcie00] [ 10.560483] Allocate Port Service[0000:00:1c.0:pcie02] [ 10.560608] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 10.560680] assign_interrupt_mode Found MSI capability [ 10.560736] Allocate Port Service[0000:00:1c.1:pcie00] [ 10.560777] Allocate Port Service[0000:00:1c.1:pcie02] [ 10.561111] isapnp: Scanning for PnP cards... [ 10.915584] isapnp: No Plug & Play device found [ 10.949050] Real Time Clock Driver v1.12ac [ 10.949337] hpet_resources: 0xfed00000 is busy [ 10.949379] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 10.950860] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 10.950946] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 10.951071] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 10.954015] i8042.c: Detected active multiplexing controller, rev 1.1. [ 10.955447] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.955453] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 10.955456] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 10.955460] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 10.955463] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 10.975832] mice: PS/2 mouse device common for all mice [ 10.975979] EISA: Probing bus 0 at eisa.0 [ 10.975987] Cannot allocate resource for EISA slot 1 [ 10.975991] Cannot allocate resource for EISA slot 2 [ 10.975993] Cannot allocate resource for EISA slot 3 [ 10.976021] EISA: Detected 0 cards. [ 10.976025] cpuidle: using governor ladder [ 10.976027] cpuidle: using governor menu [ 10.976128] NET: Registered protocol family 1 [ 10.976162] Using IPI No-Shortcut mode [ 10.976251] swsusp: Resume From Partition /dev/mapper/portus-hardy_swap [ 10.976254] PM: Checking swsusp image. [ 10.976262] swsusp: Error -6 check for resume file [ 10.976265] PM: Resume from disk failed. [ 10.976289] registered taskstats version 1 [ 10.976437] Magic number: 0:518:485 [ 10.976512] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 10.976514] EDD information not available. [ 10.976724] Freeing unused kernel memory: 364k freed [ 10.998713] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 12.271520] fuse init (API version 7.9) [ 12.293046] ACPI: Transitioning device [FAN0] to D3 [ 12.293051] ACPI: Transitioning device [FAN0] to D3 [ 12.293055] ACPI: Fan [FAN0] (off) [ 12.302503] ACPI: SSDT 7F6D819E, 02E6 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 12.302810] ACPI: SSDT 7F6D7B0F, 060A (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 12.305602] Monitor-Mwait will be used to enter C-1 state [ 12.305606] Monitor-Mwait will be used to enter C-2 state [ 12.305735] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 12.305741] ACPI: Processor [CPU0] (supports 8 throttling states) [ 12.306071] ACPI: SSDT 7F6D8484, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 12.306362] ACPI: SSDT 7F6D8119, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 12.307749] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 12.307756] ACPI: Processor [CPU1] (supports 8 throttling states) [ 12.310033] ACPI: Thermal Zone [TZ00] (54 C) [ 12.310549] ACPI: Thermal Zone [TZ01] (54 C) [ 12.333783] device-mapper: uevent: version 1.0.3 [ 12.333846] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 12.538813] usbcore: registered new interface driver usbfs [ 12.538842] usbcore: registered new interface driver hub [ 12.539467] usbcore: registered new device driver usb [ 12.541657] USB Universal Host Controller Interface driver v3.0 [ 12.541717] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 12.541730] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 12.541736] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 12.541981] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 12.542020] uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820 [ 12.542191] usb usb1: configuration #1 chosen from 1 choice [ 12.542223] hub 1-0:1.0: USB hub found [ 12.542229] hub 1-0:1.0: 2 ports detected [ 12.642933] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 12.642948] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 12.642954] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 12.642986] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 12.643023] uhci_hcd 0000:00:1a.1: irq 19, io base 0x00001840 [ 12.643173] usb usb2: configuration #1 chosen from 1 choice [ 12.643205] hub 2-0:1.0: USB hub found [ 12.643212] hub 2-0:1.0: 2 ports detected [ 12.746883] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 12.746899] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 12.746905] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 12.746936] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 12.746975] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860 [ 12.747125] usb usb3: configuration #1 chosen from 1 choice [ 12.747156] hub 3-0:1.0: USB hub found [ 12.747163] hub 3-0:1.0: 2 ports detected [ 12.850824] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 [ 12.850839] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 12.850845] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.850875] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 12.850913] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001880 [ 12.851063] usb usb4: configuration #1 chosen from 1 choice [ 12.851097] hub 4-0:1.0: USB hub found [ 12.851105] hub 4-0:1.0: 2 ports detected [ 12.954758] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 12.954774] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 12.954780] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.954811] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 12.954847] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018a0 [ 12.954999] usb usb5: configuration #1 chosen from 1 choice [ 12.955031] hub 5-0:1.0: USB hub found [ 12.955038] hub 5-0:1.0: 2 ports detected [ 12.959270] SCSI subsystem initialized [ 12.994720] libata version 3.00 loaded. [ 13.058891] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 22 [ 13.058910] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 13.058916] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 13.058949] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 13.062871] ehci_hcd 0000:00:1a.7: debug port 1 [ 13.062879] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 13.062887] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0704000 [ 13.078574] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.078751] usb usb6: configuration #1 chosen from 1 choice [ 13.078784] hub 6-0:1.0: USB hub found [ 13.078791] hub 6-0:1.0: 4 ports detected [ 13.182778] ACPI: PCI Interrupt 0000:04:09.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 13.235503] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[f0401000-f04017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 13.243233] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 13.243249] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 13.243254] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 13.243291] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 13.247221] ehci_hcd 0000:00:1d.7: debug port 1 [ 13.247229] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 13.247236] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0704400 [ 13.263470] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.263616] usb usb7: configuration #1 chosen from 1 choice [ 13.263651] hub 7-0:1.0: USB hub found [ 13.263659] hub 7-0:1.0: 6 ports detected [ 13.367539] ata_piix 0000:00:1f.2: version 2.12 [ 13.367549] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 13.426391] usb 6-2: new high speed USB device using ehci_hcd and address 2 [ 13.522359] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21 [ 13.522402] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 13.522503] scsi0 : ata_piix [ 13.523306] scsi1 : ata_piix [ 13.524569] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 [ 13.524573] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 [ 13.605004] usb 6-2: configuration #1 chosen from 1 choice [ 13.687695] ata1.00: ATA-8: FUJITSU MHW2160BH PL, 0000001C, max UDMA/100 [ 13.687702] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 13.703721] ata1.00: configured for UDMA/100 [ 14.022496] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, SC02, max UDMA/33 [ 14.194344] ata2.00: configured for UDMA/33 [ 14.194510] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2160B 0000 PQ: 0 ANSI: 5 [ 14.210955] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 14.211683] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M SC02 PQ: 0 ANSI: 5 [ 14.224851] Driver 'sd' needs updating - please use bus_type methods [ 14.224937] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 14.224953] sd 0:0:0:0: [sda] Write Protect is off [ 14.224956] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.224980] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.225039] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 14.225053] sd 0:0:0:0: [sda] Write Protect is off [ 14.225056] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.225079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.225084] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 14.295874] sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 [ 14.326107] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.333108] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.333135] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 14.389243] usb 5-1: configuration #1 chosen from 1 choice [ 14.426121] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 14.426127] Uniform CD-ROM driver Revision: 3.20 [ 14.426197] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 14.514969] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f041040216d1] [ 22.879570] padlock: VIA PadLock Hash Engine not detected. [ 23.791747] Attempting manual resume [ 23.791752] swsusp: Resume From Partition 254:2 [ 23.791754] PM: Checking swsusp image. [ 23.792146] PM: Resume from disk failed. [ 23.840045] kjournald starting. Commit interval 5 seconds [ 23.840060] EXT3-fs: mounted filesystem with ordered data mode. [ 35.439277] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.469181] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.531280] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 35.738086] Linux agpgart interface v0.102 [ 35.790051] agpgart: Detected an Intel 965GM Chipset. [ 35.791494] agpgart: Detected 7676K stolen memory. [ 35.818044] agpgart: AGP aperture is 256M @ 0xd0000000 [ 35.915399] ACPI: Battery Slot [BAT1] (battery present) [ 35.919054] iTCO_vendor_support: vendor-support=0 [ 35.954181] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 36.002959] input: Power Button (FF) as /devices/virtual/input/input3 [ 36.045857] ACPI: Power Button (FF) [PWRF] [ 36.045983] input: Lid Switch as /devices/virtual/input/input4 [ 36.077995] ACPI: Lid Switch [LID0] [ 36.078076] input: Power Button (CM) as /devices/virtual/input/input5 [ 36.099841] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000 [ 36.139261] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 36.141805] ACPI: Power Button (CM) [PWRB] [ 36.141891] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 36.189806] ACPI: Sleep Button (CM) [SLPB] [ 36.190161] ACPI: AC Adapter [ADP1] (on-line) [ 36.232236] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 36.232286] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 36.289822] Yenta: CardBus bridge found at 0000:04:09.0 [144d:c510] [ 36.397666] ricoh-mmc: Ricoh MMC Controller disabling driver [ 36.397670] ricoh-mmc: Copyright(c) Philip Langdale [ 36.418455] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 [ 36.418460] Socket status: 30000006 [ 36.418464] Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08 [ 36.418470] pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff [ 36.441653] sdhci: Secure Digital Host Controller Interface driver [ 36.441658] sdhci: Copyright(c) Pierre Ossman [ 36.467207] ricoh-mmc: Ricoh MMC controller found at 0000:04:09.3 [1180:0843] (rev 0) [ 36.467213] ricoh-mmc: Main firewire function not found. Cannot disable controller. [ 36.467253] sdhci: SDHCI controller found at 0000:04:09.2 [1180:0822] (rev 18) [ 36.467371] ACPI: PCI Interrupt 0000:04:09.2[C] -> GSI 22 (level, low) -> IRQ 23 [ 36.467388] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 36.467443] mmc0: SDHCI at 0xf0401800 irq 23 DMA [ 37.141390] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 37.141407] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 37.141448] sky2 0000:03:00.0: v1.20 addr 0xf0200000 irq 16 Yukon-FE (0xb7) rev 3 [ 37.142029] sky2 eth0: addr 00:13:77:38:f4:9c [ 37.421106] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 37.421111] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 37.421272] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 37.421290] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 37.421319] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 37.627314] ACPI: WMI-Acer: Mapper loaded [ 37.892919] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23 [ 37.892952] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 37.926545] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... [ 38.024810] Bluetooth: Core ver 2.11 [ 38.056194] NET: Registered protocol family 31 [ 38.056197] Bluetooth: HCI device and connection manager initialized [ 38.056203] Bluetooth: HCI socket layer initialized [ 38.093421] Bluetooth: HCI USB driver ver 2.9 [ 38.095310] usbcore: registered new interface driver hci_usb [ 38.230695] Linux video capture interface: v2.00 [ 38.288889] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302) [ 38.290586] usbcore: registered new interface driver uvcvideo [ 38.290591] USB Video Class driver (v0.1.0) [ 39.451598] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 39.452103] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 39.493807] cs: IO port probe 0x100-0x3af: clean. [ 39.496018] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 39.496954] cs: IO port probe 0x820-0x8ff: clean. [ 39.497723] cs: IO port probe 0xc00-0xcf7: clean. [ 39.498712] cs: IO port probe 0xa00-0xaff: clean. [ 40.173531] loop: module loaded [ 40.253416] lp: driver loaded but no devices found [ 40.478495] Adding 3145720k swap on /dev/mapper/portus-hardy_swap. Priority:-1 extents:1 across:3145720k [ 41.084486] EXT3 FS on dm-3, internal journal [ 42.754876] kjournald starting. Commit interval 5 seconds [ 42.755923] EXT3 FS on sda5, internal journal [ 42.755929] EXT3-fs: mounted filesystem with ordered data mode. [ 42.799329] kjournald starting. Commit interval 5 seconds [ 42.799915] EXT3 FS on dm-1, internal journal [ 42.799920] EXT3-fs: mounted filesystem with ordered data mode. [ 42.821780] kjournald starting. Commit interval 5 seconds [ 42.822392] EXT3 FS on dm-4, internal journal [ 42.822397] EXT3-fs: mounted filesystem with ordered data mode. [ 42.867614] kjournald starting. Commit interval 5 seconds [ 42.868227] EXT3 FS on dm-5, internal journal [ 42.868233] EXT3-fs: mounted filesystem with ordered data mode. [ 43.671994] ip_tables: (C) 2000-2006 Netfilter Core Team [ 45.603930] No dock devices found. [ 48.332074] NET: Registered protocol family 10 [ 48.332317] lo: Disabled Privacy Extensions [ 48.737443] ppdev: user-space parallel port driver [ 49.446425] audit(1205587829.391:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5585 profile="/usr/sbin/cupsd" namespace="default" [ 49.715112] IPv6 over IPv4 tunneling driver [ 49.715443] sit0: Disabled Privacy Extensions [ 49.782076] tun: Universal TUN/TAP device driver, 1.6 [ 49.782080] tun: (C) 1999-2004 Max Krasnyansky [ 49.834524] apm: BIOS not found. [ 51.929407] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 51.929412] vboxdrv: Successfully done. [ 51.929456] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 51.929458] vboxdrv: Successfully loaded version 1.5.6 (interface 0x00050002). [ 54.209189] sky2 eth0: enabling interface [ 54.215985] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 54.267466] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 54.337763] Bluetooth: L2CAP ver 2.9 [ 54.337770] Bluetooth: L2CAP socket layer initialized [ 54.422570] Bluetooth: RFCOMM socket layer initialized [ 54.422591] Bluetooth: RFCOMM TTY layer initialized [ 54.422595] Bluetooth: RFCOMM ver 1.8 [ 58.397364] [drm] Initialized drm 1.1.0 20060810 [ 58.400519] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 58.400527] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 58.400583] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 108.235699] CPU0 attaching NULL sched-domain. [ 108.235711] CPU1 attaching NULL sched-domain. [ 108.250753] CPU0 attaching sched-domain: [ 108.250761] domain 0: span 03 [ 108.250765] groups: 01 02 [ 108.250772] CPU1 attaching sched-domain: [ 108.250776] domain 0: span 03 [ 108.250779] groups: 02 01 [ 110.433543] sky2 eth0: disabling interface [ 113.406576] NET: Registered protocol family 17