Ubuntu
linux-linaro-omap package

beagle does not boot with linux-linaro 3.3 kernel

Bug #968269 reported by John Rigby on 2012-03-29

This bug affects 1 person

Affects		Status	Importance	Assigned to	Milestone
	linux-linaro-omap (Ubuntu)	New	Undecided	Unassigned

Bug Description

Kernel in current hwpack crashes coming up. If I rebuild with omap2plus_defconfig it boots to busybox. Not sure if it would crash if it mounted root since it fails because of root/kernel mismatch.

Will attach crash log.

See original description

John Rigby (jcrigby) on 2012-03-29

description:

updated

Revision history for this message

John Rigby (jcrigby) wrote on 2012-03-30:

Download full text (44.5 KiB)

U-Boot SPL 2011.12 (Mar 01 2012 - 19:25:06)
Texas Instruments Revision detection unimplemented
OMAP SD/MMC: 0
timed out in wait_for_bb: I2C_STAT=1000
reading u-boot.img
reading u-boot.img

U-Boot 2011.12 (Mar 01 2012 - 19:25:06)

OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 0 MiB
MMC: OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In: serial
Out: serial
Err: serial
Beagle xM Rev C
No EEPROM on expansion board
Die ID #56c600029ff800000163810c1502f01c
Net: No ethernet found.
checking for preEnv.txt
reading preEnv.txt

** Unable to read "preEnv.txt" from mmc 0:1 **
Hit any key to stop autoboot: 0
The user button is currently NOT pressed.
SD/MMC found on device 0
reading uEnv.txt

** Unable to read "uEnv.txt" from mmc 0:1 **
reading boot.scr

508 bytes read
Loaded script from boot.scr
Running bootscript from mmc0 ...
## Executing script at 80200000
reading uImage

4613960 bytes read
reading uInitrd

1475007 bytes read
reading board.dtb

1520 bytes read
## Booting kernel from Legacy Image at 80000000 ...
   Image Name: Linux
   Image Type: ARM Linux Kernel Image (uncompressed)
   Data Size: 4613896 Bytes = 4.4 MiB
   Load Address: 80008000
   Entry Point: 80008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
   Image Name: initramfs
   Image Type: ARM Linux RAMDisk Image (uncompressed)
   Data Size: 1474943 Bytes = 1.4 MiB
   Load Address: 00000000
   Entry Point: 00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 815f0000
   Booting using the fdt blob at 0x815f0000
   Loading Kernel Image ... OK
OK
   Using Device Tree in place at 815f0000, end 815f35ef

Starting kernel ...

U-Boot SPL 2011.12 (Mar 01 2012 - 19:25:06)
Texas Instruments Revision detection unimplemented
OMAP SD/MMC: 0
timed out in wait_for_bb: I2C_STAT=1000
reading u-boot.img
reading u-boot.img

U-Boot 2011.12 (Mar 01 2012 - 19:25:06)

OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial
Beagle xM Rev C
No EEPROM on expansion board
Die ID #56c600029ff800000163810c1502f01c
Net:   No ethernet found.
checking for preEnv.txt
reading preEnv.txt

** Unable to read "preEnv.txt" from mmc 0:1 **
Hit any key to stop autoboot:  0 
The user button is currently NOT pressed.
SD/MMC found on device 0
reading uEnv.txt

** Unable to read "uEnv.txt" from mmc 0:1 **
reading boot.scr

508 bytes read
Loaded script from boot.scr
Running bootscript from mmc0 ...
## Executing script at 80200000
reading uImage

4613960 bytes read
reading uInitrd

1475007 bytes read
reading board.dtb

1520 bytes read
## Booting kernel from Legacy Image at 80000000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4613896 Bytes = 4.4 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
   Image Name:   initramfs
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    1474943 Bytes = 1.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 815f0000
   Booting using the fdt blob at 0x815f0000
   Loading Kernel Image ... OK
OK
   Using Device Tree in place at 815f0000, end 815f35ef

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
<6>Booting Linux on physical CPU 0
<6>Initializing cgroup subsys cpuset
<5>Linux version 3.3.0-13-linaro-omap (jcrigby@jcrigby-laptop) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #13~ci~20120327001250~4f718a23-Ubuntu SMP PREEMPT Thu Mar 29 20: (Ubuntu 3.3.0-13.13~ci~20120327001250~4f718a23-linaro-omap 3.3.0)
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>Machine: OMAP3 Beagle Board, model: TI OMAP3 BeagleBoard
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.3.0-13-linaro-omap (jcrigby@jcrigby-laptop) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #13~ci~20120327001250~4f718a23-Ubuntu SMP PREEMPT Thu Mar 29 20: (Ubuntu 3.3.0-13.13~ci~20120327001250~4f718a23-linaro-omap 3.3.0)
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: OMAP3 Beagle Board, model: TI OMAP3 BeagleBoard
<6>bootconsole [earlycon0] enabled
[    0.000000] bootconsole [earlycon0] enabled
<6>Reserving 12582912 bytes SDRAM for VRAM
[    0.000000] Reserving 12582912 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
[    0.000000] Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 127744
<7>free_area_init_node: node 0, pgdat 809ef600, node_mem_map 80f6b000
<7>  Normal zone: 1024 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 126720 pages, LIFO batch:31
<6>OMAP3630 ES1.2 ([    0.000000] OMAP3630 ES1.2 (l2cache l2cache iva iva sgx sgx neon neon isp isp 192mhz_clk 192mhz_clk )
)
<6>Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
<6>PERCPU: Embedded 8 pages/cpu @81374000 s11712 r8192 d12864 u32768
[    0.000000] PERCPU: Embedded 8 pages/cpu @81374000 s11712 r8192 d12864 u32768
<7>pcpu-alloc: s11712 r8192 d12864 u32768 alloc=8*4096
<7>pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 126720
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 126720
<5>Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=7a25b753-9c2f-4542-a824-83ef3398d401 rootwait ro earlyprintk fixrtc nocompcache vram=12M omapfb.mode=dvi:1280x720MR-16@60 mpurate=auto
[    0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=7a25b753-9c2f-4542-a824-83ef3398d401 rootwait ro earlyprintk fixrtc nocompcache vram=12M omapfb.mode=dvi:1280x720MR-16@60 mpurate=auto
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory:[    0.000000] Memory: 499MB 499MB = 499MB total
 = 499MB total
<5>Memory: 489164k/489164k available, 35124k reserved, 0K highmem
[    0.000000] Memory: 489164k/489164k available, 35124k reserved, 0K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
    lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
      .text : 0x80008000 - 0x808e90c8   (9093 kB)
      .init : 0x808ea000 - 0x80957dc0   ( 440 kB)
      .data : 0x80958000 - 0x809f1d50   ( 616 kB)
       .bss : 0x809f1d74 - 0x80f6aa30   (5604 kB)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000]       .text : 0x80008000 - 0x808e90c8   (9093 kB)
[    0.000000]       .init : 0x808ea000 - 0x80957dc0   ( 440 kB)
[    0.000000]       .data : 0x80958000 - 0x809f1d50   ( 616 kB)
[    0.000000]        .bss : 0x809f1d74 - 0x80f6aa30   (5604 kB)
<6>Preemptible hierarchical RCU implementation.
[    0.000000] Preemptible hierarchical RCU implementation.
<6>NR_IRQS:474
[    0.000000] NR_IRQS:474
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
[    0.000000] Total of 96 interrupts on 1 active controller
<6>OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
<6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>Console: colour dummy device 80x30
[    0.000000] Console: colour dummy device 80x30
<6>console [tty0] enabled
[    0.000000] console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
[    0.000000] ... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
[    0.000000] ... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 3695 kB
[    0.000000]  memory used by lock dependency info: 3695 kB
 per task-struct memory footprint: 1152 bytes
[    0.000000]  per task-struct memory footprint: 1152 bytes
<6>Calibrating delay loop... [    0.111724] Calibrating delay loop... <c>493.67 BogoMIPS (lpj=1929216)
493.67 BogoMIPS (lpj=1929216)
<6>pid_max: default: 32768 minimum: 301
[    0.158874] pid_max: default: 32768 minimum: 301
<6>Security Framework initialized
[    0.167907] Security Framework initialized
<6>AppArmor: AppArmor initialized
[    0.175598] AppArmor: AppArmor initialized
<6>Yama: becoming mindful.
[    0.182495] Yama: becoming mindful.
<6>Mount-cache hash table entries: 512
[    0.190277] Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: [    0.208862] CPU: Testing write buffer coherency: ok
ok
<6>ftrace: allocating 25969 entries in 77 pages
[    0.219299] ftrace: allocating 25969 entries in 77 pages
<6>CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.362701] CPU0: thread -1, cpu 0, socket -1, mpidr 0
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.375457] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>Setting up static identity map for 0x80646720 - 0x80646778
[    0.389801] Setting up static identity map for 0x80646720 - 0x80646778
<6>Brought up 1 CPUs
[    0.436462] Brought up 1 CPUs
<6>SMP: Total of 1 processors activated (493.67 BogoMIPS).
[    0.445007] SMP: Total of 1 processors activated (493.67 BogoMIPS).
<6>devtmpfs: initialized
[    0.459228] devtmpfs: initialized
<4>omap_hwmod: usbtll_fck: missing clockdomain for usbtll_fck.
[    0.482757] omap_hwmod: usbtll_fck: missing clockdomain for usbtll_fck.
<6>print_constraints: dummy: 
[    0.529663] print_constraints: dummy: 
<6>NET: Registered protocol family 16
[    0.540466] NET: Registered protocol family 16
<6>GPMC revision 5.0
[    0.548828] GPMC revision 5.0
<6>gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.569335] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
<6>OMAP GPIO hardware version 2.5
[    0.580352] OMAP GPIO hardware version 2.5
<6>gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.591339] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
<6>gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.605102] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
<6>gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.618988] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
<6>gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[    0.633056] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
<6>gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[    0.647369] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
<6>omap_mux_init: Add partition: #1: core, flags: 0
[    0.669464] omap_mux_init: Add partition: #1: core, flags: 0
<6>OMAP3 Beagle Rev: xM C
[    0.681579] OMAP3 Beagle Rev: xM C
<3>_omap_mux_get_by_name: Could not find signal gpmc_wait2.uart4_tx
[    0.709075] _omap_mux_get_by_name: Could not find signal gpmc_wait2.uart4_tx
<3>omap_hwmod_mux_init: Could not allocate device mux entry
[    0.722381] omap_hwmod_mux_init: Could not allocate device mux entry
<6>Reprogramming SDRC clock to 400000000 Hz
[    0.733612] Reprogramming SDRC clock to 400000000 Hz
<3>dpll3_m2_clk rate change failed: -22
[    0.742675] dpll3_m2_clk rate change failed: -22
<4> usbhs_omap: alias fck already exists
[    0.754455]  usbhs_omap: alias fck already exists
<6>Found NAND on CS0
[    0.762573] Found NAND on CS0
<6>Registering NAND on CS0
[    0.768463] Registering NAND on CS0
<7>gpio_request: gpio--22 (DVI reset) status -22
<3>Unable to get DVI reset GPIO
[    0.781188] Unable to get DVI reset GPIO
<4>omap_init_opp_table: no hwmod or odev for mpu, [0] cannot add OPPs.
[    0.791870] omap_init_opp_table: no hwmod or odev for mpu, [0] cannot add OPPs.
<3>beagle_opp_init: opp default init failed
[    0.803649] beagle_opp_init: opp default init failed
<6>No ATAGs?[    0.809997] No ATAGs?<6>hw-breakpoint: debug architecture 0x4 unsupported.

[    0.817138] hw-breakpoint: debug architecture 0x4 unsupported.
<3>Could not look up mcpdm hw_mod
[    0.833221] Could not look up mcpdm hw_mod
<3>Could not look up mcpdm hw_mod
[    0.841064] Could not look up mcpdm hw_mod
<4> omap-mcbsp.2: alias fck already exists
[    0.870086]  omap-mcbsp.2: alias fck already exists
<4> omap-mcbsp.3: alias fck already exists
[    0.880706]  omap-mcbsp.3: alias fck already exists
<6>OMAP DMA hardware revision 5.0
[    0.896820] OMAP DMA hardware revision 5.0
<6>Serial: AMBA PL011 UART driver
[    0.906402] Serial: AMBA PL011 UART driver
<6>bio: create slab <bio-0> at 0
[    1.035034] bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
[    1.053924] SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
[    1.082122] usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
[    1.094116] usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
[    1.105407] usbcore: registered new device driver usb
<6>omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[    1.131683] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
<6>twl4030: PIH (irq 7) chaining IRQs 368..401
[    1.156066] twl4030: PIH (irq 7) chaining IRQs 368..401
<6>twl4030: power (irq 373) chaining IRQs 402..409
[    1.167449] twl4030: power (irq 373) chaining IRQs 402..409
<6>twl4030: gpio (irq 368) chaining IRQs 410..427
[    1.180877] twl4030: gpio (irq 368) chaining IRQs 410..427
<4>------------[ cut here ]------------
[    1.190643] ------------[ cut here ]------------
<4>WARNING: at /home/jcrigby/work/git-trees/linaro-q/linaro-q/drivers/gpio/gpio-twl4030.c:410 gpio_twl4030_probe+0x4c/0x218()
[    1.206970] WARNING: at /home/jcrigby/work/git-trees/linaro-q/linaro-q/drivers/gpio/gpio-twl4030.c:410 gpio_twl4030_probe+0x4c/0x218()
<d>Modules linked in:[    1.221557] Modules linked in:

[<80016f30>] (unwind_backtrace+0x0/0xec) from [<806261b8>] (dump_stack+0x20/0x24)
[    1.232513] [<80016f30>] (unwind_backtrace+0x0/0xec) from [<806261b8>] (dump_stack+0x20/0x24)
[<806261b8>] (dump_stack+0x20/0x24) from [<8003e68c>] (warn_slowpath_common+0x5c/0x74)
[    1.249389] [<806261b8>] (dump_stack+0x20/0x24) from [<8003e68c>] (warn_slowpath_common+0x5c/0x74)
[<8003e68c>] (warn_slowpath_common+0x5c/0x74) from [<8003e6d0>] (warn_slowpath_null+0x2c/0x34)
[    1.267364] [<8003e68c>] (warn_slowpath_common+0x5c/0x74) from [<8003e6d0>] (warn_slowpath_null+0x2c/0x34)
[<8003e6d0>] (warn_slowpath_null+0x2c/0x34) from [<8061a654>] (gpio_twl4030_probe+0x4c/0x218)
[    1.286010] [<8003e6d0>] (warn_slowpath_null+0x2c/0x34) from [<8061a654>] (gpio_twl4030_probe+0x4c/0x218)
[<8061a654>] (gpio_twl4030_probe+0x4c/0x218) from [<8040834c>] (platform_drv_probe+0x24/0x28)
[    1.304565] [<8061a654>] (gpio_twl4030_probe+0x4c/0x218) from [<8040834c>] (platform_drv_probe+0x24/0x28)
[<8040834c>] (platform_drv_probe+0x24/0x28) from [<80406d60>] (really_probe+0xa8/0x158)
[    1.322570] [<8040834c>] (platform_drv_probe+0x24/0x28) from [<80406d60>] (really_probe+0xa8/0x158)
[<80406d60>] (really_probe+0xa8/0x158) from [<80406f80>] (driver_probe_device+0x58/0x70)
[    1.340118] [<80406d60>] (really_probe+0xa8/0x158) from [<80406f80>] (driver_probe_device+0x58/0x70)
[<80406f80>] (driver_probe_device+0x58/0x70) from [<80407080>] (__device_attach+0x4c/0x50)
[    1.357910] [<80406f80>] (driver_probe_device+0x58/0x70) from [<80407080>] (__device_attach+0x4c/0x50)
[<80407080>] (__device_attach+0x4c/0x50) from [<80405678>] (bus_for_each_drv+0x60/0x9c)
[    1.375640] [<80407080>] (__device_attach+0x4c/0x50) from [<80405678>] (bus_for_each_drv+0x60/0x9c)
[<80405678>] (bus_for_each_drv+0x60/0x9c) from [<80406ecc>] (device_attach+0x88/0xb4)
[    1.392883] [<80405678>] (bus_for_each_drv+0x60/0x9c) from [<80406ecc>] (device_attach+0x88/0xb4)
[<80406ecc>] (device_attach+0x88/0xb4) from [<804064ac>] (bus_probe_device+0x38/0xac)
[    1.409973] [<80406ecc>] (device_attach+0x88/0xb4) from [<804064ac>] (bus_probe_device+0x38/0xac)
[<804064ac>] (bus_probe_device+0x38/0xac) from [<80404a88>] (device_add+0x224/0x3a4)
[    1.426971] [<804064ac>] (bus_probe_device+0x38/0xac) from [<80404a88>] (device_add+0x224/0x3a4)
[<80404a88>] (device_add+0x224/0x3a4) from [<80408898>] (platform_device_add+0x118/0x174)
[    1.444335] [<80404a88>] (device_add+0x224/0x3a4) from [<80408898>] (platform_device_add+0x118/0x174)
[<80408898>] (platform_device_add+0x118/0x174) from [<8063739c>] (add_numbered_child+0xd8/0x11c)
[    1.462768] [<80408898>] (platform_device_add+0x118/0x174) from [<8063739c>] (add_numbered_child+0xd8/0x11c)
[<8063739c>] (add_numbered_child+0xd8/0x11c) from [<806374e8>] (add_children+0x58/0x834)
[    1.481109] [<8063739c>] (add_numbered_child+0xd8/0x11c) from [<806374e8>] (add_children+0x58/0x834)
[<806374e8>] (add_children+0x58/0x834) from [<8061b648>] (twl_probe+0x32c/0x384)
[    1.498016] [<806374e8>] (add_children+0x58/0x834) from [<8061b648>] (twl_probe+0x32c/0x384)
[<8061b648>] (twl_probe+0x32c/0x384) from [<804d21e8>] (i2c_device_probe+0xb8/0xe4)
[    1.514495] [<8061b648>] (twl_probe+0x32c/0x384) from [<804d21e8>] (i2c_device_probe+0xb8/0xe4)
[<804d21e8>] (i2c_device_probe+0xb8/0xe4) from [<80406d60>] (really_probe+0xa8/0x158)
[    1.531402] [<804d21e8>] (i2c_device_probe+0xb8/0xe4) from [<80406d60>] (really_probe+0xa8/0x158)
[<80406d60>] (really_probe+0xa8/0x158) from [<80406f80>] (driver_probe_device+0x58/0x70)
[    1.548767] [<80406d60>] (really_probe+0xa8/0x158) from [<80406f80>] (driver_probe_device+0x58/0x70)
[<80406f80>] (driver_probe_device+0x58/0x70) from [<80407080>] (__device_attach+0x4c/0x50)
[    1.566589] [<80406f80>] (driver_probe_device+0x58/0x70) from [<80407080>] (__device_attach+0x4c/0x50)
[<80407080>] (__device_attach+0x4c/0x50) from [<80405678>] (bus_for_each_drv+0x60/0x9c)
[    1.584320] [<80407080>] (__device_attach+0x4c/0x50) from [<80405678>] (bus_for_each_drv+0x60/0x9c)
[<80405678>] (bus_for_each_drv+0x60/0x9c) from [<80406ecc>] (device_attach+0x88/0xb4)
[    1.601562] [<80405678>] (bus_for_each_drv+0x60/0x9c) from [<80406ecc>] (device_attach+0x88/0xb4)
[<80406ecc>] (device_attach+0x88/0xb4) from [<804064ac>] (bus_probe_device+0x38/0xac)
[    1.618652] [<80406ecc>] (device_attach+0x88/0xb4) from [<804064ac>] (bus_probe_device+0x38/0xac)
[<804064ac>] (bus_probe_device+0x38/0xac) from [<80404a88>] (device_add+0x224/0x3a4)
[    1.635681] [<804064ac>] (bus_probe_device+0x38/0xac) from [<80404a88>] (device_add+0x224/0x3a4)
[<80404a88>] (device_add+0x224/0x3a4) from [<80404c2c>] (device_register+0x24/0x28)
[    1.652496] [<80404a88>] (device_add+0x224/0x3a4) from [<80404c2c>] (device_register+0x24/0x28)
[<80404c2c>] (device_register+0x24/0x28) from [<804d2ac4>] (i2c_new_device+0x120/0x184)
[    1.669586] [<80404c2c>] (device_register+0x24/0x28) from [<804d2ac4>] (i2c_new_device+0x120/0x184)
[<804d2ac4>] (i2c_new_device+0x120/0x184) from [<804d2eb0>] (i2c_register_adapter+0x14c/0x208)
[    1.687652] [<804d2ac4>] (i2c_new_device+0x120/0x184) from [<804d2eb0>] (i2c_register_adapter+0x14c/0x208)
[<804d2eb0>] (i2c_register_adapter+0x14c/0x208) from [<804d30c8>] (i2c_add_numbered_adapter+0xb4/0xd4)
[    1.707092] [<804d2eb0>] (i2c_register_adapter+0x14c/0x208) from [<804d30c8>] (i2c_add_numbered_adapter+0xb4/0xd4)
[<804d30c8>] (i2c_add_numbered_adapter+0xb4/0xd4) from [<80620aa0>] (omap_i2c_probe+0x328/0x410)
[    1.726684] [<804d30c8>] (i2c_add_numbered_adapter+0xb4/0xd4) from [<80620aa0>] (omap_i2c_probe+0x328/0x410)
[<80620aa0>] (omap_i2c_probe+0x328/0x410) from [<8040834c>] (platform_drv_probe+0x24/0x28)
[    1.745208] [<80620aa0>] (omap_i2c_probe+0x328/0x410) from [<8040834c>] (platform_drv_probe+0x24/0x28)
[<8040834c>] (platform_drv_probe+0x24/0x28) from [<80406d60>] (really_probe+0xa8/0x158)
[    1.762939] [<8040834c>] (platform_drv_probe+0x24/0x28) from [<80406d60>] (really_probe+0xa8/0x158)
[<80406d60>] (really_probe+0xa8/0x158) from [<80406f80>] (driver_probe_device+0x58/0x70)
[    1.780487] [<80406d60>] (really_probe+0xa8/0x158) from [<80406f80>] (driver_probe_device+0x58/0x70)
[<80406f80>] (driver_probe_device+0x58/0x70) from [<80407010>] (__driver_attach+0x78/0x9c)
[    1.798309] [<80406f80>] (driver_probe_device+0x58/0x70) from [<80407010>] (__driver_attach+0x78/0x9c)
[<80407010>] (__driver_attach+0x78/0x9c) from [<80405714>] (bus_for_each_dev+0x60/0x90)
[    1.816009] [<80407010>] (__driver_attach+0x78/0x9c) from [<80405714>] (bus_for_each_dev+0x60/0x90)
[<80405714>] (bus_for_each_dev+0x60/0x90) from [<80406aec>] (driver_attach+0x28/0x30)
[    1.833282] [<80405714>] (bus_for_each_dev+0x60/0x90) from [<80406aec>] (driver_attach+0x28/0x30)
[<80406aec>] (driver_attach+0x28/0x30) from [<804066bc>] (bus_add_driver+0xb0/0x238)
[    1.850280] [<80406aec>] (driver_attach+0x28/0x30) from [<804066bc>] (bus_add_driver+0xb0/0x238)
[<804066bc>] (bus_add_driver+0xb0/0x238) from [<804075b4>] (driver_register+0xb0/0x13c)
[    1.867462] [<804066bc>] (bus_add_driver+0xb0/0x238) from [<804075b4>] (driver_register+0xb0/0x13c)
[<804075b4>] (driver_register+0xb0/0x13c) from [<80408668>] (platform_driver_register+0x54/0x68)
[    1.885711] [<804075b4>] (driver_register+0xb0/0x13c) from [<80408668>] (platform_driver_register+0x54/0x68)
[<80408668>] (platform_driver_register+0x54/0x68) from [<809159dc>] (omap_i2c_init_driver+0x14/0x1c)
[    1.905120] [<80408668>] (platform_driver_register+0x54/0x68) from [<809159dc>] (omap_i2c_init_driver+0x14/0x1c)
[<809159dc>] (omap_i2c_init_driver+0x14/0x1c) from [<8000889c>] (do_one_initcall+0xa0/0x174)
[    1.924194] [<809159dc>] (omap_i2c_init_driver+0x14/0x1c) from [<8000889c>] (do_one_initcall+0xa0/0x174)
[<8000889c>] (do_one_initcall+0xa0/0x174) from [<808ea9b4>] (kernel_init+0xc0/0x168)
[    1.941864] [<8000889c>] (do_one_initcall+0xa0/0x174) from [<808ea9b4>] (kernel_init+0xc0/0x168)
[<808ea9b4>] (kernel_init+0xc0/0x168) from [<8000f064>] (kernel_thread_exit+0x0/0x8)
[    1.958770] [<808ea9b4>] (kernel_init+0xc0/0x168) from [<8000f064>] (kernel_thread_exit+0x0/0x8)
<4>---[ end trace da227214a82491b7 ]---
[    1.971923] ---[ end trace da227214a82491b7 ]---
<6>gpiochip_add: registered GPIOs 192 to 211 on device: twl4030
[    1.984497] gpiochip_add: registered GPIOs 192 to 211 on device: twl4030
<6>print_constraints: VUSB1V5: 1500 mV normal standby
[    2.006195] print_constraints: VUSB1V5: 1500 mV normal standby
<6>print_constraints: VUSB1V8: 1800 mV normal standby
[    2.020324] print_constraints: VUSB1V8: 1800 mV normal standby
<6>print_constraints: VUSB3V1: 3100 mV normal standby
[    2.034332] print_constraints: VUSB3V1: 3100 mV normal standby
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x40/64; link 0
<6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    2.058319] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
<6>print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[    2.077758] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
<6>print_constraints: VDAC: 1800 mV normal standby
[    2.093566] print_constraints: VDAC: 1800 mV normal standby
<6>print_constraints: VDVI: 1800 mV normal standby
[    2.107452] print_constraints: VDVI: 1800 mV normal standby
<6>print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
[    2.123443] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
<6>omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[    2.137298] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
<6>NetLabel: Initializing
[    2.159515] NetLabel: Initializing
<6>NetLabel:  domain hash size = 128
[    2.167053] NetLabel:  domain hash size = 128
<6>NetLabel:  protocols = UNLABELED CIPSOv4
[    2.175872] NetLabel:  protocols = UNLABELED CIPSOv4
<6>NetLabel:  unlabeled traffic allowed by default
[    2.186309] NetLabel:  unlabeled traffic allowed by default
<6>Switching to clocksource 32k_counter
[    2.196044] Switching to clocksource 32k_counter
<6>AppArmor: AppArmor Filesystem Enabled
[    2.318664] AppArmor: AppArmor Filesystem Enabled
<3>usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed error:-22
[    2.424652] usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed error:-22
<3>usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
[    2.438842] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
<6>musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)[    2.455139] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)<7>twl4030_usb twl4030_usb: twl4030_phy_resume

<7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>musb-hdrc: MHDRC RTL version 1.800 
<7>musb-hdrc: setup fifo_mode 4
<7>musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[    2.504516] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
<6>NET: Registered protocol family 2
[    2.518280] NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    2.530181] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    2.546386] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
[    2.560577] TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
[    2.584960] TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
[    2.594146] TCP reno registered
<6>UDP hash table entries: 256 (order: 2, 24576 bytes)
[    2.602600] UDP hash table entries: 256 (order: 2, 24576 bytes)
<6>UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[    2.614715] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
<6>NET: Registered protocol family 1
[    2.625946] NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
[    2.637786] RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
[    2.647918] RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
[    2.656677] RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.667236] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>Trying to unpack rootfs image as initramfs...
[    2.680541] Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 1440K
[    2.867340] Freeing initrd memory: 1440K
<6>audit: initializing netlink socket (disabled)
[    2.895446] audit: initializing netlink socket (disabled)
<5>type=2000 audit(2.375:1): initialized
[    2.905700] type=2000 audit(2.375:1): initialized
<6>Kprobe smoke test started
[    3.062347] Kprobe smoke test started
<6>Kprobe smoke test passed successfully
[    3.105590] Kprobe smoke test passed successfully
<6>JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    3.131103] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
<6>Btrfs loaded
[    3.144042] Btrfs loaded
<6>msgmni has been set to 958
[    3.149932] msgmni has been set to 958
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    3.166717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
[    3.177917] io scheduler noop registered
<6>io scheduler deadline registered
[    3.185607] io scheduler deadline registered
<6>io scheduler cfq registered (default)
[    3.194213] io scheduler cfq registered (default)
<6>OMAP DSS rev 2.0
[    3.206634] OMAP DSS rev 2.0
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.234161] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[    3.258514] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
<6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[    3.275421] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
<6>omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[    3.291442] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
<6>console [ttyO2] enabled, bootconsole disabled
[    3.304168] console [ttyO2] enabled, bootconsole disabled
[    3.304168] console [ttyO2] enabled, bootconsole disabled
<6>omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[    3.324005] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
<6>[drm] Initialized drm 1.1.0 20060810
[    3.339050] [drm] Initialized drm 1.1.0 20060810
<6>brd: module loaded
[    3.397033] brd: module loaded
<6>loop: module loaded
[    3.433807] loop: module loaded
<3>mtdoops: mtd device (mtddev=name/number) must be supplied
[    3.454620] mtdoops: mtd device (mtddev=name/number) must be supplied
<4>No NAND device found
[    3.465393] No NAND device found
<4>No NAND device found
[    3.471557] No NAND device found
<6>OneNAND driver initializing
[    3.479064] OneNAND driver initializing
<6>usbcore: registered new interface driver asix
[    3.498565] usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
[    3.510437] usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver smsc95xx
[    3.522491] usbcore: registered new interface driver smsc95xx
<6>usbcore: registered new interface driver net1080
[    3.534301] usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
[    3.546203] usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
[    3.558166] usbcore: registered new interface driver zaurus
<6>usbcore: registered new interface driver cdc_ncm
[    3.569702] usbcore: registered new interface driver cdc_ncm
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.583984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
<7>ehci-omap ehci-omap.0: failed to get ehci port0 regulator
<7>ehci-omap ehci-omap.0: failed to get ehci port1 regulator
<7>ehci-omap ehci-omap.0: phy reset operation timed out
<7>ehci-omap ehci-omap.0: phy reset operation timed out
<7>ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
<7>ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
<7>ehci-omap ehci-omap.0: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
<6>ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[    5.656524] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
<6>ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[    5.673767] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
<7>ehci-omap ehci-omap.0: park 0
<6>ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[    5.690399] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
<7>ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
<6>ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[    5.722198] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
<7>usb usb1: default language 0x0409
<7>usb usb1: udev 1, busnum 1, minor = 0
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.742980] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.756561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: OMAP-EHCI Host Controller
[    5.768615] usb usb1: Product: OMAP-EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 3.3.0-13-linaro-omap ehci_hcd
[    5.779968] usb usb1: Manufacturer: Linux 3.3.0-13-linaro-omap ehci_hcd
<6>usb usb1: SerialNumber: ehci-omap.0
[    5.790557] usb usb1: SerialNumber: ehci-omap.0
<7>usb usb1: usb_probe_device
<7>usb usb1: configuration #1 chosen from 1 choice
<7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>hub 1-0:1.0: usb_probe_interface
<7>hub 1-0:1.0: usb_probe_interface - got id
<6>hub 1-0:1.0: USB hub found
[    5.825561] hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 3 ports detected
[    5.833007] hub 1-0:1.0: 3 ports detected
<7>hub 1-0:1.0: standalone hub
<7>hub 1-0:1.0: individual port power switching
<7>hub 1-0:1.0: individual port over-current protection
<7>hub 1-0:1.0: power on to power good time: 20ms
<7>hub 1-0:1.0: local power source is good
<7>hub 1-0:1.0: enabling power on all ports
<7>ehci-omap ehci-omap.0: ...powerup ports...
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.902862] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<7>ohci_hcd: block sizes: ed 64 td 64
<6>ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
[    5.918701] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
<6>ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
[    5.933380] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
<7>ohci-omap3 ohci-omap3.0: starting OHCI controller
<7>ohci-omap3 ohci-omap3.0: created debug files
<6>ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400
[    5.956329] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>ohci-omap3 ohci-omap3.0: OHCI controller state
<7>ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers, rh state running
<7>ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3
<7>ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0
<7>ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF
<7>ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH
<7>ohci-omap3 ohci-omap3.0: hcca frame #0034
<7>ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3)
<7>ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000
<7>ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE
<7>ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS
<7>ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS
<7>ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS
<7>usb usb2: default language 0x0409
<7>usb usb2: udev 1, busnum 2, minor = 128
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    6.135101] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.148651] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: OMAP3 OHCI Host Controller
[    6.160797] usb usb2: Product: OMAP3 OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 3.3.0-13-linaro-omap ohci_hcd
[    6.172241] usb usb2: Manufacturer: Linux 3.3.0-13-linaro-omap ohci_hcd
<6>usb usb2: SerialNumber: ohci-omap3.0
[    6.182922] usb usb2: SerialNumber: ohci-omap3.0
<7>usb usb2: usb_probe_device
<7>usb usb2: configuration #1 chosen from 1 choice
<7>usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>hub 2-0:1.0: usb_probe_interface
<7>hub 2-0:1.0: usb_probe_interface - got id
<6>hub 2-0:1.0: USB hub found
[    6.214538] hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 3 ports detected
[    6.221740] hub 2-0:1.0: 3 ports detected
<7>hub 2-0:1.0: standalone hub
<7>hub 2-0:1.0: no power switching (usb 1.0)
<7>hub 2-0:1.0: global over-current protection
<7>hub 2-0:1.0: power on to power good time: 20ms
<7>hub 2-0:1.0: local power source is good
<7>hub 2-0:1.0: no over-current condition exists
<7>hub 2-0:1.0: trying to enable port power on non-switchable hub
<6>usbcore: registered new interface driver cdc_wdm
[    6.265472] usbcore: registered new interface driver cdc_wdm
<6>Initializing USB Mass Storage driver...
[    6.275634] Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
[    6.286865] usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
[    6.297119] USB Mass Storage support registered.
<6>usbcore: registered new interface driver libusual
[    6.308929] usbcore: registered new interface driver libusual
<6>usbcore: registered new interface driver usbtest
[    6.320861] usbcore: registered new interface driver usbtest
<6>input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
[    6.342437] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
<7>hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
<6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    6.376647] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<6>i2c /dev entries driver
[    6.387054] i2c /dev entries driver
<6>Driver for 1-wire Dallas network protocol.
[    6.400421] Driver for 1-wire Dallas network protocol.
<6>OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    6.416076] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
<3>twl4030_wdt twl4030_wdt: Failed to register misc device
[    6.429718] twl4030_wdt twl4030_wdt: Failed to register misc device
<4>twl4030_wdt: probe of twl4030_wdt failed with error -16
[    6.442199] twl4030_wdt: probe of twl4030_wdt failed with error -16
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    6.460113] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<7>Registered led device: beagleboard::usr0
<7>Registered led device: beagleboard::usr1
<7>Registered led device: beagleboard::pmu_stat
<6>usbcore: registered new interface driver usbhid
[    6.855255] usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
[    6.864837] usbhid: USB HID core driver
<6>oprofile: using arm/armv7
[    6.873870] oprofile: using arm/armv7
<6>TCP cubic registered
[    6.881408] TCP cubic registered
<6>Initializing XFRM netlink socket
[    6.888366] Initializing XFRM netlink socket
<6>NET: Registered protocol family 10
[    6.897521] NET: Registered protocol family 10
<6>IPv6 over IPv4 tunneling driver
[    6.909484] IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
[    6.921936] NET: Registered protocol family 17
<6>NET: Registered protocol family 15
[    6.930541] NET: Registered protocol family 15
<5>Registering the dns_resolver key type
[    6.940155] Registering the dns_resolver key type
<6>VFP support v0.3: [    6.947998] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
implementor 41 architecture 3 part 30 variant c rev 3
<6>ThumbEE CPU extension supported.
[    6.964935] ThumbEE CPU extension supported.
<5>Registering SWP/SWPB emulation handler
[    6.973999] Registering SWP/SWPB emulation handler
<4>------------[ cut here ]------------
[    7.001312] ------------[ cut here ]------------
<4>WARNING: at /home/jcrigby/work/git-trees/linaro-q/linaro-q/arch/arm/plat-omap/omap_device.c:1047 omap_device_get_by_hwmod_name+0x98/0xf4()
[    7.019073] WARNING: at /home/jcrigby/work/git-trees/linaro-q/linaro-q/arch/arm/plat-omap/omap_device.c:1047 omap_device_get_by_hwmod_name+0x98/0xf4()
omap_device_get_by_hwmod_name: no omap_device for mpu
[    7.038299] omap_device_get_by_hwmod_name: no omap_device for mpu
<d>Modules linked in:[    7.046752] Modules linked in:

[<80016f30>] (unwind_backtrace+0x0/0xec) from [<806261b8>] (dump_stack+0x20/0x24)
[    7.057739] [<80016f30>] (unwind_backtrace+0x0/0xec) from [<806261b8>] (dump_stack+0x20/0x24)
[<806261b8>] (dump_stack+0x20/0x24) from [<8003e68c>] (warn_slowpath_common+0x5c/0x74)
[    7.074645] [<806261b8>] (dump_stack+0x20/0x24) from [<8003e68c>] (warn_slowpath_common+0x5c/0x74)
[<8003e68c>] (warn_slowpath_common+0x5c/0x74) from [<8003e760>] (warn_slowpath_fmt+0x40/0x48)
[    7.092712] [<8003e68c>] (warn_slowpath_common+0x5c/0x74) from [<8003e760>] (warn_slowpath_fmt+0x40/0x48)
[<8003e760>] (warn_slowpath_fmt+0x40/0x48) from [<80037a80>] (omap_device_get_by_hwmod_name+0x98/0xf4)
[    7.112426] [<8003e760>] (warn_slowpath_fmt+0x40/0x48) from [<80037a80>] (omap_device_get_by_hwmod_name+0x98/0xf4)
[<80037a80>] (omap_device_get_by_hwmod_name+0x98/0xf4) from [<808f44cc>] (omap2_set_init_voltage+0x50/0x1a4)
[    7.133300] [<80037a80>] (omap_device_get_by_hwmod_name+0x98/0xf4) from [<808f44cc>] (omap2_set_init_voltage+0x50/0x1a4)
[<808f44cc>] (omap2_set_init_voltage+0x50/0x1a4) from [<808f46e4>] (omap2_common_pm_late_init+0x34/0xb8)
[    7.154296] [<808f44cc>] (omap2_set_init_voltage+0x50/0x1a4) from [<808f46e4>] (omap2_common_pm_late_init+0x34/0xb8)
[<808f46e4>] (omap2_common_pm_late_init+0x34/0xb8) from [<8000889c>] (do_one_initcall+0xa0/0x174)
[    7.174316] [<808f46e4>] (omap2_common_pm_late_init+0x34/0xb8) from [<8000889c>] (do_one_initcall+0xa0/0x174)
[<8000889c>] (do_one_initcall+0xa0/0x174) from [<808ea9b4>] (kernel_init+0xc0/0x168)
[    7.192596] [<8000889c>] (do_one_initcall+0xa0/0x174) from [<808ea9b4>] (kernel_init+0xc0/0x168)
[<808ea9b4>] (kernel_init+0xc0/0x168) from [<8000f064>] (kernel_thread_exit+0x0/0x8)
[    7.209716] [<808ea9b4>] (kernel_init+0xc0/0x168) from [<8000f064>] (kernel_thread_exit+0x0/0x8)
<4>---[ end trace da227214a82491b8 ]---
[    7.222900] ---[ end trace da227214a82491b8 ]---
<3>omap2_set_init_voltage: Unable to get dev pointer for hwmod mpu
[    7.233978] omap2_set_init_voltage: Unable to get dev pointer for hwmod mpu
<3>omap2_set_init_voltage: unable to set vdd_mpu_iva
[    7.246276] omap2_set_init_voltage: unable to set vdd_mpu_iva
<3>omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    7.258575] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
<3>omap2_set_init_voltage: unable to set vdd_core
[    7.270721] omap2_set_init_voltage: unable to set vdd_core
<4>mmc0: host does not support reading read-only switch. assuming write-enable.
[    7.291625] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>mmc0: new high speed SDHC card at address b368
[    7.325500] mmc0: new high speed SDHC card at address b368
<6>mmcblk0: mmc0:b368 USD   3.75 GiB 
[    7.355743] mmcblk0: mmc0:b368 USD   3.75 GiB 
<6>clock: disabling unused clocks to save power
[    7.366485] clock: disabling unused clocks to save power
<6> mmcblk0: p1 p2
[    7.382476]  mmcblk0: p1 p2
<6>fbcvt: 1280x720@60: CVT Name - .921M9-R
[    7.399658] fbcvt: 1280x720@60: CVT Name - .921M9-R
<6>Console: switching to colour frame buffer device 160x45
[    7.442962] Console: switching to colour frame buffer device 160x45
<4>regulator_init_complete: VDAC: incomplete constraints, leaving on
[    7.480285] regulator_init_complete: VDAC: incomplete constraints, leaving on
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input1
[    7.496765] input: gpio-keys as /devices/platform/gpio-keys/input/input1
<6>twl_rtc twl_rtc: setting system clock to 2000-01-01 04:57:44 UTC (946702664)
[    7.516754] twl_rtc twl_rtc: setting system clock to 2000-01-01 04:57:44 UTC (946702664)
<6>Freeing init memory: 436K
[    7.533874] Freeing init memory: 436K
Loading, please wait...
<30>udevd[692]: starting version 173
[    7.831420] udevd[692]: starting version 173
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend, wakeup 1
<7>ehci-omap ehci-omap.0: suspend root hub
<7>hub 2-0:1.0: hub_suspend
<7>usb usb2: bus auto-suspend, wakeup 1
<7>ohci-omap3 ohci-omap3.0: suspend root hub
Begin: Running /scripts/local-premount ... done.
<6>EXT3-fs (mmcblk0p2): recovery required on readonly filesystem
[    9.768493] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem
<6>EXT3-fs (mmcblk0p2): write access will be enabled during recovery
[    9.853485] EXT3-fs (mmcblk0p2): write access will be enabled during recovery
<6>kjournald starting.  Commit interval 5 seconds
[   15.554382] kjournald starting.  Commit interval 5 seconds
<6>EXT3-fs (mmcblk0p2): recovery complete
[   15.913696] EXT3-fs (mmcblk0p2): recovery complete
<6>EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[   15.925048] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
<30>udevd[837]: starting version 173
<6>EXT3-fs (mmcblk0p2): using internal journal
<4>init: upstart-udev-bridge main process (835) killed by ABRT signal
<4>init: upstart-udev-bridge main process ended, respawning
<4>unwind: Index not found 7f07f4d8
<4>unwind: Index not found 7f07f4d8
<4>unwind: Index not found 7f07f4d8
<4>unwind: Index not found 7f07f4d8
<4>init: upstart-udev-bridge main process (870) killed by ABRT signal
<4>init: upstart-udev-bridge main process ended, respawning
<4>init: upstart-udev-bridge main process (892) killed by ABRT signal
<4>init: upstart-udev-bridge main process ended, respawning
<6>OMAP3 Beagle/Devkit8000 SoC init
<4>init: upstart-udev-bridge main process (908) killed by ABRT signal
<4>init: upstart-udev-bridge main process ended, respawning
<6>asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
<4>init: upstart-udev-bridge main process (925) killed by ABRT signal
<4>init: upstart-udev-bridge main process ended, respawning
<4>init: udev-fallback-graphics main process (985) terminated with status 1
fsck from util-linux 2.19.1
rootfs: clean, 7379/243360 files, 110568/972032 blocks

Revision history for this message

John Rigby (jcrigby) wrote on 2012-03-30:

That was a log with thumb kernel turned off. It hangs after the fsck.

Revision history for this message

Chase Qi (chase-qi) wrote on 2014-08-29:

Migrated to bugzilla: https://bugs.linaro.org/show_bug.cgi?id=578