Gigabyte T1125N Cando Touchscreen Rotation Coordinate Fail
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Expired
|
Undecided
|
Unassigned |
Bug Description
Executed xrandr --output $display --rotate left
Screen rotated properly, touchscreen coordinate system did not rotate with display.
output from xrandr --verbose [displaying only Cando config]
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (0x47) normal (normal left inverted right x axis y axis) 256mm x 144mm
Identifier: 0x41
Timestamp: 4098802
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
filter:
EDID:
00fffffffffff
00140103801a0
2050540000000
0101010101011
1300009010000
0000000000000
4720446973706
004c503131365
BACKLIGHT: 4 (0x00000004) range: (0,9)
Backlight: 4 (0x00000004) range: (0,9)
scaling mode: Full aspect
supported: None Full Center Full aspect
1366x768 (0x47) 69.4MHz +HSync -VSync *current +preferred
h: width 1366 start 1384 end 1404 total 1498 skew 0 clock 46.3KHz
v: height 768 start 769 end 772 total 775 clock 59.8Hz
1360x768 (0x48) 84.8MHz -HSync +VSync
h: width 1360 start 1432 end 1568 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1360x768 (0x49) 72.0MHz +HSync -VSync
h: width 1360 start 1408 end 1440 total 1520 skew 0 clock 47.4KHz
v: height 768 start 771 end 781 total 790 clock 60.0Hz
1024x768 (0x4a) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x4b) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x4c) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x4d) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 1.23-0ubuntu3
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xbc400000 irq 43'
Mixer name : 'Intel IbexPeak HDMI'
Components : 'HDA:10ec0269,
Controls : 20
Simple ctrls : 12
DistroRelease: Ubuntu 11.10
HibernationDevice: RESUME=
InstallationMedia: Ubuntu 10.04.3 LTS "Lucid Lynx" - Release amd64 (20110720.1)
MachineType: GIGABYTE T1125
Package: linux (not installed)
ProcEnviron:
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=
ProcVersionSign
PulseSinks:
Error: command ['pacmd', 'list-sinks'] failed with exit code 1: Home directory /home/ananda not ours.
No PulseAudio daemon running, or not running as session daemon.
PulseSources:
Error: command ['pacmd', 'list-sources'] failed with exit code 1: Home directory /home/ananda not ours.
No PulseAudio daemon running, or not running as session daemon.
RelatedPackageV
linux-
linux-
linux-firmware 1.60
StagingDrivers: mei
Tags: oneiric staging
Uname: Linux 3.0.0-12-generic x86_64
UpgradeStatus: Upgraded to oneiric on 2011-10-27 (11 days ago)
UserGroups:
dmi.bios.date: 05/18/2011
dmi.bios.vendor: INSYDE
dmi.bios.version: F12
dmi.board.
dmi.board.name: T1125
dmi.board.vendor: GIGABYTE
dmi.board.version: Base Board Version
dmi.chassis.
dmi.chassis.type: 1
dmi.chassis.vendor: Chassis Manufacturer
dmi.chassis.
dmi.modalias: dmi:bvnINSYDE:
dmi.product.name: T1125
dmi.product.
dmi.sys.vendor: GIGABYTE
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run:
apport-collect 882866
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the Ubuntu Kernel Team.